The work done in moving a block across a rough surface and the heat energy gained by the block can both be measured in Joules.
What are Joules?Joules is a unit of measurement used in physics that indicates the force exerted on a particular object.
A Joule is a work when a force that equals one (1) newton moves an object one (1) meter in a given direction.
Joules is the most widely extended unit of force and energy in physics and related disciplines.
Learn more about Joules here:
https://brainly.com/question/490326
The main environmental effects of ozone depletion could include all of the following except
The main environmental effects of ozone depletion could include the following:
higher risk of skin cancersunburnsquick ageingweakend immune systemWhat is ozone depletion?Ozone depletion is the gradual thinning of the ozone layer in the upper atmosphere as a result of the relelase of chemical compounds or gases.
Ozone layer helps prevent the Earth surface against incoming ultraviolet radiations that could cause damage to our environment.
Therefore, the main environmental effects of ozone depletion could include the following:
higher risk of skin cancersunburnsquick ageingweakend immune systemLearn more about ozone depletion at: https://brainly.com/question/1238233
The following are some of the primary environmental implications of ozone depletion and increased risk of skin cancer, sunburns, rapid aging, and the immune system being weakened.
What is ozone depletion, and how does it happen?The progressive weakening of the ozone layer in the upper atmosphere as a result of the release of chemical compounds or gases is known as ozone depletion.
The ozone layer protects the Earth's surface from harmful UV rays that may harm our environment. As a result, the primary environmental effects of ozone depletion could include:
1. An increased risk of skin cancer
2. Sunburns
3. Rapid aging
4. The immune system is weakened.
Hence increased risk of skin cancer is the main environmental effect of ozone depletion.
To learn more about the ozone depletion refer to the link;
https://brainly.com/question/11318086
#SPJ4
The rotational inertia of a sphere of mass m and radius r about a diameter is 25mr2. The rotational inertia about an axis tangent to the sphere is
The rotational inertia about an axis tangent to the sphere of the given mass and radius is ⁷/₅MR².
Parallel axis theoremAccording to parallel axis theorem, the moment of inertia of a body about any axis is equal to the sum of the product of its mass and the square of the distance between the two parallel axis and the moment of inertia of the body about a parallel axis passing through its centre of mass.
The moment of inertia of the sphere about its parallel axis passing through its centre of mass = ²/₅MR²
The product of its mass and the square of the distance between the two parallel axis = MR²
Rotational inertia about an axis tangent to the sphereMoment of inertia about an axis tangent to the sphere = MR² + ²/₅MR²
= ⁷/₅MR²
Learn more about moment of inertia here: https://brainly.com/question/3406242
The rotational inertia of a sphere of given mass and radius along a tangent axis is [tex]\rm \frac{7}{5} MR^2[/tex].
What is a moment of inertia?The sum of the products of the mass of each particle in the body with the square of its distance from the axis of rotation expresses a body's tendency to resist angular acceleration.
The given data in the problem is;
M is the sphere's mass.
R is the radius of a sphere
According to the parallel axis theorem,The rotational inertia of a sphere of given mass and radius along a tangent axis is found as;
[tex]\rm I=MR^2+\frac{2}{5} MR^2 \\\\ I=\frac{7}{5} MR^2[/tex]
To learn more about the moment of inertia refer to the link;
https://brainly.com/question/15246709
#SPJ4
The presence of which magnetic feature best explains why a magnet can act at a distance on other magnets or on objects containing certain metals? fields dipoles domains forces
The orientation with the largest magnetic torque on the dipole is Orientation B (See attached image).
What is Magnetic Torque?The torque on the dipole is defined as:
τ = µ×B,
where B is the external magnetic field.
The magnitude of this torque is µB sinθ, where θ is the angle between B and µ
Magnetic Torque is highest when;
→ →
µ ⊥ β
That is when θ = 90°. Hence B is the correct answer. Please see attached image.
Learn more about Magnetic Torque at:
brainly.com/question/6585693
Answer:
b
Explanation:
A student states, "The wave model is better than the particle model for electromagnetic radiation because it is easier to understand." Is the student's statement a scientific claim?(1 point)
Yes, it is because simpler scientific models are better.
No, it isn't because the particle model is better than the wave model.
No, it isn't because the statement is an opinion.
Yes, it is because there is ample proof that wave models are easier.
The student's claim did not follow the scientific method of discovery, hence, it is an opinion not a scientific claim.
What is the scientific method?The scientific method is a procedure employed by scientific towards understanding the world around them as well giving explanation for phenomena in the natural world.
The scientific method involves:
observations asking questions putting forward a hypothesis testing the hypothesis through experiments analyzing results of the experiments and drawing conclusions establishing a theory.Since the student in question just put forward an opinion without testing it out using the scientific method, the statement is not a scientific claim.
Learn more about scientific method at: https://brainly.com/question/17216882
write comparison between Electrical Circuit and Magnetic Circuit.
[tex] \\ \\ \\ \\ \\ \\ \\ [/tex]
Thanks¡!¡:)
Magnetic circuit, closed path to which a magnetic field, represented as lines of magnetic flux, is confined.
In contrast to an electric circuit through which electric charge flows, nothing actually flows in a magnetic circuit.
Explanation:
Hope it helps you (`▿▿▿▿´ƪ)
Emma wants to drive forward in her car. What does she need to do other than place her vehicle's gear in Drive and accelerate
She need to release the cluch slowly and apply force on the accelator other than place her vehicle's gear in Drive and accelerate
How we drive a car?We drive a car by applying pressure on the accelator, remove foot from the brakes and releasing cluch slowly. When the vehicle get speed, we have to change the gear.
So we can conclude that She need to release the cluch slowly and apply force on the accelator for driving a car.
Learn more about accelaration here: https://brainly.com/question/605631
I have an answer but I'm not it sure about it. I just need someone to help confirm it. Thanks
Answer:
0.40s. He's dead, Jim.
Explanation:
The block accelerates at a rate of [tex]9.81 ms^-^2[/tex]. The moment it's 14 meters from the ground, it has traveled 39 meters, in about [tex]39=\frac12(9.81)t^2 \rightarrow 2.82 s[/tex].
For the man to dodge, the time left is the distance the block takes to go down to 2 meters from ground, or 51 meters from its starting point. Which translates in [tex]51=\frac12(9.81)t^2\rightarrow 3.22s[/tex]
He has thus less than half a second ([tex]0.40s[/tex] to be exact) to dodge.
Calculate the volume of 500 kilograms
to 2 decimal places
flead if the density of lead is 11400 kg/m². Give your answer
Enter your answer to 2 decimal places
Answer:
d (density) = M / V
V = M / d = 500 kg / (11400 kg / m^2 = .044 m^3
Question 1(Multiple Choice Worth 2 points)
(04.05 LC)
The number of protons plus the number of neutrons in an atom is equal to its
O atomic number
O mass number
O nuclear model
O energy level
Question 2 Multiple Choice Worth 2 points)
Answer: Mass Number
Explanation:
Atomic number is the number of just protons;
Nuclear Model is a theoretical description of what an atom looks like;
Energy levels are the energy states that electrons are in;
However, mass number is by definition the number of protons + number of neutrons. :)
A 23. 6 g ball of clay is thrown horizontally to the right at 40. 4 m/s toward a 1. 70 kg block sitting at rest on a frictionless surface. The clay hits and sticks to the block.
What is the speed of the block and clay right after the collision?
Answer in m/s to three significant figures
Answer:
0.142 m/s
Explanation:
You solve it by conservation of momentum.
Before the impact the total momentum is, considering right the positive direction,
[tex]m_1v_1+m_2v_2 =6\cdot10^-^3\times 40.4\ kg\cdot m/s + 1.7\times 0 \ kg\cdot m/s =242.4\cdot 10^-^3\ kg\cdot m/s[/tex]
After the impact, we have a single body of mass [tex]m_1+m_2[/tex] and thus a single value of speed, V.
[tex](m_1+m_2)V =1.703 kg \cdot V[/tex]
Since no external forces are applied, the two quantities are equal after the impact. That allows us to solve for V
[tex]V= (242.4\cdot10^-^3 \ kg\cdot m/s )\div (1.703\ kg)=142.337\cdot10^-^3 m/s = 0.142 m/s[/tex]
Cars enter a car wash at a mean rate of 33 cars per half an hour. What is the probability that, in any hour, exactly 22 cars will enter the car wash? round your answer to four decimal places
Answer:Cars enter a car wash at a mean rate of 4 cars per half an hour.
Explanation:
The probability that, in any hour, exactly 22 cars will enter the car wash will be 0.0920.
What is probability?Probability means possibility. It deals with the occurrence of a random event. The value of probability can only be from 0 to 1.
Its basic meaning is something is likely to happen. It is the ratio of the favorable event to the total number of events.
The mean rate of car is,[tex]\rm \lambda = 66 \ car/hour[/tex]
[tex]P(x=K) = \frac{8^k e^{-8}}{k\!}\\\\P(x=22) = \frac{66^{22} e^{-22}}{22\!}\\\\ P(x=22)=\frac{0.000000000000691\times 1.07\times 10^{40}}{22} \\\\\ P(x=22)=0[/tex]
Hence the probability that, in any hour, exactly 22 cars will enter the car wash will be 0
To learn more about the probability link is given below.
https://brainly.com/question/795909
#SPJ4
1 point
8. A magnetic field of 30 T is directed perpendicular to the force of a coil
with an area of 0.36 m^2. Calculate the magnetic flux in the coil.
A)0.27 Wb
B)9.3 Wb
C)10.8 Wb
D)83.3 Wb
Answer:
the answer is. C.
Explanation:
[tex] 0.36 \times 30 = 10.8[/tex]
the solution
My Noacid performs a physics lab to determine the speed of sound inside a tube. She blocks off one end of the 120. 0 cm tube with a book and places a microphone at the other end. When she snaps her finger she determines the time for the sound to get back to the microphone is. 00695 s. What was the speed of sound that day
The speed of sound inside a tube when she snapped her finger is determined as 345.32 m/s.
Speed of the sound
The speed of the sound wave can be determined by applying echo formula as shown below;
v = 2d/t
where;
d is the distance traveled by the sound wave = 120 cm = 1.2 mt is the time when the sound wave was heard = 0.00695 sSubstitute the given parameters and solve for speed.
v = (2 x 1.2)/(0.00695
v = 345.32 m/s
Thus, the speed of sound inside a tube when she snapped her finger is determined as 345.32 m/s.
Learn more about speed of sound here: https://brainly.com/question/2142871
A flat coil of wire has an inductance of 40. 0 mh and a resistance of 6. 00 ω. It is connected to a 21. 2-v battery at the instant t = 0. Consider the moment when the current is 2. 50 a
For a flat coil of wire has an inductance of 40. 0 mh and a resistance of 6. 00 ω, the rate of energy being delivered is mathematically given as
P= 53 W
What rate is energy being delivered by the battery?Generally, the equation for the Battery power is mathematically given as
P = I (dt)V
Therefore
P= 2.50 A * 21.2V
P= 53 W
In conclusion, rate of energy being delivered
P= 53 W
Read more about Energy
https://brainly.com/question/13439286
A flat coil of wire has an inductance of 40. 0 mh and a resistance of 6. 00 ω. It is connected to a 21. 2-v battery at the instant t = 0.The power developed will be 53 Watt.
What is electric power?Electric power is the product of the voltage and current. Its unit is the watt. It is the rate of the electric work done.
The given data in the problem is;
V is the voltage = 21.2 volt (V)
I is the electric current = 2.50 ampere (A)
The formula for the power is given as;
[tex]\rm P= V I \\\\\ P= 2.50 \times 21.2 \\\\ P=53 \ watt[/tex]
Hence electric power developed will be 53 Watts.
To learn more about the electric power refer to the link;
https://brainly.com/question/12316834
#SPJ4
A photon with wavelength 11. 0 nm is absorbed when an electron in a three-dimensional cubical box makes a transition from the ground state to the second excited state
For a photon with wavelength 11. 0 nm, the side length LL of the box is mathematically given as
L=1.414*10^{-27}m
What is the side length LL of the box?Generally, the equation for the change in energy is mathematically given as
[tex]dE=\frac{hc}{\lambda}[/tex]
Therefore
[tex]\frac{hc}{\lambda}=\frac{6h^2}{8ml}\\\\L=\sqrt{6h\lambda}{8mc}\\\\L=\sqrt{\frac{6(6.626*10^{-34})*11.0*10^{-9}}{8(9.11*10^31)(3*10^8)}}[/tex]
L=1.414*10^{-27}m
In conclusion, the side length LL of the box is
L=1.414*10^{-27}m
Read more about Mesurement
https://brainly.com/question/17972372
The side length of the box for a photon of wavelength 11. 0 nm will be [tex]\rm L = 1.414 \times 10^{-27}[/tex] m.
What is wavelength?The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.
The change in the energy of the photon is found as;
[tex]\rm dE = \frac{hc}{\lambda} \\\\ \frac{hc}{\lambda} =\frac{6h^2}{8ml} \\\\ L= \sqrt{\frac{6h\lambda}{8mc} } \\\\ L = \sqrt{\frac{6 \times 6.626 \times 10^{-34}\times 11 \times 10^{-9}}{8 \times 9.11 \times 10^{31} \times 3 \times10^8} } \\\\ L= 1.414 \times 10^{-27} \ m[/tex]
Hence the side length of the box for a photon of wavelength 11. 0 nm will be [tex]\rm L = 1.414 \times 10^{-27}[/tex] m.
To learn more about the wavelength refer to the link;
brainly.com/question/7143261
#SPJ4
To predict whether a star will ultimately become a black hole, what is the key property of the star we should look at?.
A star will ultimately become a black hole when it collapses due to end of fuel.
Which star becomes a black hole?When a star burns through the last of its fuel, the object may collapse, or fall into itself. For smaller stars which are about three times the sun's mass, the new core will become a white dwarf but when a larger star collapses, it turns into a black hole.
So we can can conclude that a star will ultimately become a black hole when it collapses due to end of fuel.
Learn more about star here: https://brainly.com/question/10597324
Photoelectrons are emitted from the surface of a metal when light shines on it. If the wavelength of the light is decreased
Answer:
what are your answer choices if you have any?
Explanation:
(my ask question thingy isnt working)
A 120 N accelerates an object 1. 2 m/s? What is the mass of the object?
Answer:
m = 100 kg
Explanation:
F = ma
120 = m × 1.2
m = 120 ÷ 1.2
m = 100 kg
A particular lightbulb is designed to consume 40 W when operating on a car's 12-V DC electric power. If you supply that bulb with 12-V AC power from a transformer, how much power will it consume
Using the model above, which letter represents the position of the earth when the northern hemisphere is experiencing the shortest hours of daylight
A
B
C
D
Answer:
At position "B" the northern hemisphere is tilted the most from the earth-sun direction and will experience the shortest hours of daylight, (and also the most indirect sun rays).
At what constant velocity must a spacecraft travel from earth if it is to reach the star in 3. 7 years, as measured by travelers on the spacecraft?
The constant velocity that the spacecraft must travel is : 3.49 * 10⁸ m/s
Given data :
Distance of star from earth = 4.3 light years
Observers time = 3.7 years
Determine the constant velocity the spacecraft must travelObservers time = 3.7 * 365 * 24 * 60 * 60
Distance of star from earth = 4.3 * 9.46 * 10¹⁵
The velocity the spacecraft must travel will be calculated using the equation
V = distance / time
= ( 4.3 * 9.46 * 10¹⁵ ) / ( 3.7 * 365 * 24 * 60 * 60 )
= 3.49 * 10⁸ m/s
Hence we can conclude that The constant velocity that the spacecraft must travel is : 3.49 * 10⁸ m/s
Learn more about space travelling : https://brainly.com/question/1344685
Attached below is the missing detail related to the question
The constant velocity must the spacecraft travels from the earth will be 3.49×10⁸ m/sec.
What is velocity?The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The given data in the problem is
Distance of earth from stars = 4.3 light year
The given time = 3.7 year
One year converted into the second as;
[tex]\rm 1 \ year = 3.7 \times 365 \ days \ \times 24 \ hour \times 60 \ minute \times 60 \ sec \\\\ 1 year = 116 \times 10^6 \ sec[/tex]
1 light-year into a kilometer as;
[tex]\rm 4.3 \ light year = 4.3 \times 9.46 \times 10^{15 metre} \\\\[/tex]
At what constant velocity must a spacecraft travel from the earth if it is to reach the star in 3. 7 years,
The velocity of the spacecraft's travel from the earth will be;
[tex]\rm V = \frac{d}{t} \\\\ V= \frac{4.3 \times 9.46 \times 10^{15}}{3.7 \times 365 \times 24 \times 60 \times 60 } \\\\\ V= 3.49 \times 10^8 \ m/sec[/tex]
Hence the constant velocity must the spacecraft travels from the earth will be 3.49×10⁸ m/sec.
To learn more about the velocity refer to the link;
https://brainly.com/question/862972
#SPJ4
define one meter lendth
Explanation:
The metre is currently defined as the length of the path travelled by light in a vacuum in 1299 792 458 of a second.
Hope it helps
Have a great day
TC
:DD
Calculate the mass (in g) of 346 cm³ of polythene. The density of polythene is 0.95 g/cm³. Give your answer to 2 decimal places.
Answer:
M = 328.70g
Explanation:
From the given values:
V = 346 cm³
M of 1 cm³ of Polythene = 0.95g or 95/100g
Solve:
M = (95×346)
10
= 32870
100
M = 328.70g
Which Tesla would win in a drag race?
(A) 2009 Tesla Roadster
(B) 2016 Tesla Model X
Answer:B
Explanation:
A has about 248 hp but B has about 683 hp. 2016 is younger too. good day
Explain why electromagnetic forces are essential to forming compounds.
Explanation:
formation of compounds because the electric forces compel the atoms to attract each other and formed bonds which leads to the formation of chemical compounds. The attractive or repulsive interaction between any two charged bodies is known as an electric force so the attraction between two opposite charged atoms causes the formation of compounds so we can conclude that electric forces are important for the formation of compounds.
amy bought 3 body lotions and 7 body spray for 80 jessica bought 6 body lotion and 3 body spray for 63.75 how much does one body spray cost
Answer:
Each body spray cost $ 21.25
Explanation:
why is the freezing compartment kept at top in a refrigerator?
Answer:
Because Geography says the higher one goes the colder it gets
Answer:
The nature of convection.
Explanation:
Warm air rises; cold air falls, so the freezer at the top provides cold air for the other compartments at the bottom.
15. A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s?
The answer is 0.389 kg but please show your work.
Let's look at relationship
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{m}{k}}[/tex]
[tex]\\ \rm\rightarrowtail T\propto \sqrt{m}[/tex]
Hence
[tex]\\ \rm\rightarrowtail \dfrac{T_1}{T_2}=\sqrt{\dfrac{m1}{m2}}[/tex]
[tex]\\ \rm\rightarrowtail \dfrac{1.5}{2}=\sqrt{\dfrac{0.5}{m2}}[/tex]
[tex]\\ \rm\rightarrowtail 0.75^2=\dfrac{0.5}{m2}[/tex]
[tex]\\ \rm\rightarrowtail m_2=\dfrac{0.5}{0.75^2}[/tex]
[tex]\\ \rm\rightarrowtail m_2=0.889[/tex]
Hence
Mass needs to added =0.889-0.500=0.389kgAnswer
Mass needs to added =0.889-0.500=0.389kg
Explanation:
A wave oscillates 4.0 times a second and has a wavelength of 3.0 m.
What are the (a) frequency, (b) period, and (c) speed of this wave?
a) The frequency of the wave is 4.0 Hz
b) The period T of the wave is 0.25s
c) The speed of the wave is 12m/s
Given the data in the question;
Number of oscillation per seconds = 4.0Wavelength; [tex]\lambda = 3.0m[/tex]Frequency; [tex]f = \ ?[/tex]Period; [tex]T = \ ?[/tex]Speed of the wave; [tex]v = \ ?[/tex]Frequency, Period and speed.Frequency is simply the number of occurrences of a repeating phenomenon per unit time.
Period is the time needed for a complete cycle of vibration to pass a given point.
It is expressed as;
[tex]T = \frac{1}{f}[/tex]
Where f is the frequency
Speed is simply the distance traveled in a given interval of time or time ratio.
It is expressed as;
[tex]v = \lambda * f[/tex]
Where [tex]\lambda[/tex] is wavelength and f is frequency
a) Frequency
We said frequency is the number of occurrences of a repeating phenomenon per unit time.
Since the wave oscillates 4.0 times a second
Hence, the frequency of the wave is 4.0 Hz
b) Period
[tex]Period\ T = \frac{1}{f} \\\\Period\ T = \frac{1}{4.0Hz}\\\\Period\ T = \frac{1}{4.0s^{-1}}\\\\Period\ T = 0.25s[/tex]
Therefore, the period T of the wave is 0.25s
c) Speed
[tex]v = \lambda * f\\\\v = 3.0m * 4.0Hz\\\\v = 3.0m * 4.0s^{-1}\\\\v = 12ms^{-1}\\\\v = 12m/s[/tex]
Therefore the speed of the wave is 12m/s.
Learn more about speed, wavelength and frequency: https://brainly.com/question/27120701
10. A ball is attached to a string of length 4 m to make a pendulum. The pendulum is placed at a location that is away from the Earth’s surface by twice the radius of the Earth. What is the acceleration due to gravity at that height and what is the period of the oscillations?
Please show all of your work.
Let's see
Radius of earth=6371mTwice of it=6371(2)=12742m[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{l}{g}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi \sqrt{\dfrac{4}{g}}[/tex]
[tex]\\ \rm\rightarrowtail T=2\pi\dfrac{2}{\sqrt{g}}[/tex]
[tex]\\ \rm\rightarrowtail T=\dfrac{4\pi}{\sqrt{g}}[/tex]
So
[tex]\\ \rm\rightarrowtail g=\dfrac{16\pi ^2}{T^2}[/tex]
Answer:
g' = 1.09 m/s²
T = 12 s
Explanation:
Gravity due to acceleration
Distance from center of Earth = r + 2r = 3rgravity due to acceleration on surface, g = GM/r²Substitute 3r in the denominatorg' = GM/(3r)² = GM/9r²⇒ g' = g/9 = 9.8/9 = 1.09 m/s²
Time period
T = 2π√L/g'T = 2π√4/1.09T ≅ 12 s