The temperature went from 25 to 90 degrees Celsius. What is the CHANGE in temperature?

There are 6.44 × 10²³ molecules in 24.0 L of oxygen gas at standard temperature and pressure.

HOW TO CALCULATE NUMBER OF MOLECULES:

To calculate the number of molecules in a substance, we need the number of moles. The number of moles can be calculated using ideal gas law equation as follows:

PV = nRT

Where;

According to this question, oxygen gas is at standard temperature (273K) and pressure (1 atm)

1 × 24 = n × 0.0821 × 273

24 = 22.4n

n = 24 ÷ 22.4

n = 1.07moles

To calculate the number of molecules, we multiply the no. of moles by Avogadro's number (6.02 × 10²³)

no. of molecules = 1.07 × 6.02 × 10²³

no. of molecules = 6.44 × 10²³

Therefore, there are 6.44 × 10²³ molecules in 24.0 L of oxygen gas at standard temperature and pressure.

Learn more about how to calculate number of molecules at: https://brainly.com/question/19481036?referrer=searchResults

Answer:

The answer is C

Explanation:

Just took the test

Hydrogen bonding is the intermolecular interaction that occurs due to electronegativity differences. Substance B has stronger bonds and requires more energy. Thus, option B is correct.

Hydrogen bonding is present in the water molecules that is because of the electronegativity differences and the dipole-dipole interaction. The hydrogen of the water molecule is bonded to the oxygen molecule.

The hydrogen bonding affects the boiling and the melting point of the substances as more energy are required to change the phase of the matter. So when substance B requires 100ºC than substance A (78.4ºC) it shows strong hydrogen bonding.

Therefore, option B. substance B has a strong hydrogen bond is correct.

Learn more about hydrogen bonds here:

https://brainly.com/question/25989787

#SPJ2

Answer:

All answers given in the photo

The London forces designated as A are much weaker than the dipole- dipole interaction designated as B.

The intermolecular forces are interactions that exists between molecules of a substance in a particular state of matter. The nature of intermolecular forces in a substance greatly affect the properties of the substance.

We can see that A represents weak London forces while B represents dipole - dipole interactions. The London forces are very much weaker than the dipole - dipole interactions.

Learn more intermolecular forces: https://brainly.com/question/17111432

Answer:

true

Explanation:

because carbon dioxide is dencer than oxygen therefore it displaces it

Easy!!

2+17=19

#hope that helps

Answer:

To find the answer you may

2+17=19

Explanation:

so that is the answer I'm sorry,to not give all the solutions

Answer:

A. candle wax cooling on the table

Explanation:

Candle wax cooling on a table is an example of freezing because the atoms in the candle wax start to slow down as the wax cools. This is considered "freezing" because the slower an atom is vibrating then the colder it is and of course the faster an atom is vibrating then the hotter it is! :)

A chemical compound is a material made up of several types of molecules. Therefore, potassium Nitride is the name of the compound K[tex]_3[/tex]N.

A compound is indeed a substance that is composed of two or more separate chemical elements mixed in a defined ratio in chemistry. When the elements combine, they react and generate chemical connections that really are hard to break. These bonds occur as a result of atoms sharing or exchanging electrons.

A chemical compound is a material made up of several types of molecules (or molecular entities) that include atoms from much more than one chemical element and are bound together by chemical bonds. Potassium Nitride is the name of the compound K[tex]_3[/tex]N.

Therefore, potassium Nitride is the name of the compound K[tex]_3[/tex]N.

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ5

Heat flows from our body to iron

Answer:

A. CaCO(s)+SO(g)+O(g) --> CaSO(s)+CO(g)

A. CaCO(s)+SO(g)+O(g) --> CaSO(s)+CO(g)

Answer:

The setup above is used to collect hydrogen gas

Both filtration and distillation are useful ,methods to purify or separate components of a mixture. To collect soluble gas such as ammonia the best method is distillation. Thus setup 2 is better for collection of solute.

Distillation is the process of separation of compounds using  heat and condenser. The mixture is first boiled to the boiling point of solvent. When it is heated the solvent such as water passes from the beaker on which the mixture is taken.

The steam of the solvent is then cooled in the condenser tube and then liquid is collected to a second beaker. Therefore, the solute remains in the first beaker and can be collected.

Using filtration, we can only separate solution with insoluble solutes. Using filter paper the solid from the solution can be separated out.

First set up shows the filtration method  which is not applicable for collecting soluble gas like ammonia. Therefore, the second setup that is distillation is better to collect soluble gases.

To find more about distillation, refer the link below:

https://brainly.com/question/13345735

#SPJ2

Answer:

i did not find the amswer sorry

Answer:

A.

The answer is A :)

the second options

the number of protons and electrons found in that element

Answer:

A solution contains 0.100 mol of NaCl dissolved in 8.60 mol of water.

Answer:

i think the answer is C , atom mass increases with temperature

Answer:

The Sigma (σ) Bond

S-S Overlapping. In this kind of overlapping, one 's' orbital from each participating atom undergoes head-on overlapping along the internuclear axis. ...

S-P Overlapping. ...

P-P overlapping.

why are electric switches and boards are made up of plastic

Because plastic is a poor conductor of electricity.

Plastics do not conduct enough heat and electricity. Therefore, it is used in the manufacture of plug switches, plug boards, etc.

Here is the atomic model in the picture.

This question is describing an spectrophotometry experiment in which the concentration of copper(II) ions has to be determined when 2.50 g of a copper-rich penny is reacted with 50.0 mL of nitric acid. In addition, the absorbance of a sample of the solution turned out to be 0.12 at 635 nm, so that the concentration was estimated as 12.8 g/L.

First of all, we must recall the Beer's law that can be written as follows:

[tex]A=ebC[/tex]

Whereas A is the absorbance of the sample, e the molar absorptivity, b the cuvette's path and C the concentration. However, this problem is not providing sufficient information to calculate the required concentration, however, similar absorbance experiments have graphed (absorbance vs concentration) calibration curves exhibiting trendlines as the one shown below:

[tex]y=0.009647x-0.003655[/tex]

Thus, since y stands for the absorbance and x for the concentration but in g/L not M (mol/L) for those experiments, we can set y equal to 0.12 so we solve for x as the concentration of the copper(II) ions in the sample:

[tex]y=0.009647x-0.003655\\\\x=\frac{0.12+0.003655}{0.009647}\\\\x=12.8g/L[/tex]

Nevertheless, it would be great if you come up with your own trendline, having clear the units for the absorbance vs concentration graph and thus double check your results because the data was not enough for the time being.

Learn more:

Answer:

0.1045 L (4 s.f.)

Explanation:

The molecular weight, [tex]M_{r}[/tex], of calcium chloride is

[tex]M_{r}(\mathrm{CaCl_{2}}) \ = \ A_{r}(\mathrm{Ca}) \ + \ 2 \times A_{r}(\mathrm{Cl}) \ = \ (40 \ + \ 2 \times 35.5) \ \mathrm{g \ mol^{-1}} \ = \ 111 \ \mathrm{g \ mol^{-1}}[/tex], where [tex]A_{r}[/tex] is the atomic weight of the respective elements.

To calculate the number of moles (n) of calcium chloride present in 58g,

[tex]n_{\mathrm{CaCl_{2}}} \ = \ mass \ \div \ molecular \ weight \ (M_{r}) \\ \\ \-\hspace{1.13cm} = \ 58g \ \div \ 111 \ \mathrm{g \ mol^{-1}} \\ \\ \-\hspace{1.13cm} = \ 0.5225 \ \mathrm{mol \ of \ CaCl_{2}}[/tex]

Since molarity, M, is defined as the number of moles (n) of the solute per liters of a solution (L), hence to get the volume (V) required to make up a 5 molar solution is

[tex]n \ = \ M \times V \\ \\ V \-\hspace{0.05cm} = \ \displaystyle\frac{n}{M} \\ \\ V \-\hspace{0.05cm} = \displaystyle \frac{0.5225 \ \mathrm{mol}}{5 \ \mathrm{mol \ L^{-1}}} \\ \\ V \-\hspace{0.05cm} = \ 0.1045 \ \mathrm{L}[/tex]

Answer:

265hs+24.464536b+16o

Explanation:

265hs+16o+9b(2.718282)

=265hs+16o+24.464536b

=265hs+24.464536b+16o

Answer:OK im not 100% sure but it should be the right one

Explanation:

Answer:

0.133681 (cubic foot)

Explanation:

1 mL = 0.815 g

11.2 mL = X

X = 11.2 × 0.815

= 9.128 g

mole = 9.128/58

= 0.157 mole

1 mole = 6.02 × 10^23 atoms

0.157 mol = x

X = 0.157/1 × 6.02 × 10^23

= 9.451 × 10^22 atoms of C

please to recheck answers to ensure they are correct

I really hope this helps