ILL GIVE YOU BRAIN LIEST IF YOU KNOW THE ANSWERS
Answer:B & C
tell me if im wrong
Answer:
Q 3 c it will reduce rate of photosynthesis in plants that live in the bottom of the lake
Q4 d the atom are in same group
This is right answer because these two elements are Lithium and neon Lithium is present in first group and Neon in last or group 18
Explanation:
consider an atom that has an electron in an exicted state . the electron falls to a lower energy level . what effects does that have on the electron ?
Answer:
Each time an excited helium atom falls back from an excited state to its ground state or to a lower energy state, it emits a photon of radiation that shows up as this specific line-emission spectrum.
Explanation:
help me please just w number 2&3
Answer:
2.No. because in an open system, gas will blow up & so, if it's measured, it won't have the equal amount of the reactant. But, if you arrange this reaction in a closed system, then it will be the same.
3.2SiO2+4Cl2= 2SiCl4+O2
Explanation:
Density is defined by the equation d = m/v. Calculate the density of the wooden block, the rock, and the water by dividing the mass of each object by its volume.
Answer:
Density, d = 8.92 g/mL
Explanation:
Let mass of the wooden block, m = 46.83 g
The volume of the object, V = 5.25 mL
We need to find the density of the wooden block. The density of an object is given by its mass per unit volume.
density = mass/volume
[tex]d=\dfrac{46.83\ g}{5.25\ mL}\\\\=8.92\ g/mL[/tex]
So, the density of the wooden block is 8.92 g/mL.
Answer:
0.495 g/cm3
Explanation:
Meiosis goes through 2 divisions to create four unique haploid cells. true or false
Answer:
True
Explanation:
True is the ANSWER.
1. What's the difference between a proton and a positively charged hydrogen ion?
Answer:
Theoretically not directly describing, .Atoms vs Ions an ion is an electrically charged particle produced by either removing electrons from a neutral atom to give a positive ion or adding electrons to a neutral atom to give a negative ion. When an ion is formed, the number of protons does not change.
Neutral atoms can be turned into positively charged ions by removing one or more electrons. A neutral sodium atom, for example, contains 11 protons and 11 electrons. By removing an electron from this atom we get a positively charged Na+ ion that has a net charge of +1.
Atoms that gain extra electrons become negatively charged. A neutral chlorine atom, for example, contains 17 protons and 17 electrons. By adding one more electron we get a negatively charged Cl- ion with a net charge of -1.
The gain or loss of electrons by an atom to form negative or positive ions has an enormous impact on the chemical and physical properties of the atom. Sodium metal, for example, which consists of neutral sodium atoms, bursts into flame when it comes in contact with water. Neutral chlorine atoms instantly combine to form Cl2 molecules, which are so reactive that entire communities are evacuated when trains carrying chlorine gas derail. Positively charged Na+ and negatively charged Cl- ions are so unreactive that we can safely take them into our bodies whenever we salt our food.
Explanation:
mark brainlist
i need help asap!! i will give brainliest
The following diagram shows the bonds that make up potassium acetate.
Answer:
6
Explanation:
ye
The element fluorine has an atomic number of
a. 10
b. 9
c. 19
d. 28
Answer:
B.9
Explanation:
Cynthia has 200kg of magnesium. Calculate how much MgCl2 she can make.
Mg + Cl2 = MgCl2
Answer:
784.4kg
Explanation:
Given parameters:
Mass of Mg = 200kg
Unknown:
Mass of MgCl₂ = ?
Solution:
The reaction equation is given as:
Mg + Cl₂ → MgCl₂
Find the number of moles of the given specie;
Number of moles of Mg = [tex]\frac{mass}{molar mass}[/tex] = [tex]\frac{200000}{24.3}[/tex] = 8230.5mole
So;
1 mole of Mg will produce 1 mole of MgCl₂
8230.5mole of Mg will produce 8230.5mole of MgCl₂
Mass of MgCl₂ = number of moles x molar mass
Molar mass of MgCl₂ = 24.3 + 2(35.5) = 95.3g/mol
Mass of MgCl₂ = 8230.5mole x 95.3g/mol = 784.4kg
The reaction of Pb+4 and O-2 produces the compound of
a
Pb2O2
b
PbO
c
Pb2O
d
PbO2
Answer:
Pb₂O₄
Explanation:
The given species are:
Pb⁴⁺ O²⁻
Now, to solve this problem, we use the combining powers which corresponds to the number of electrons usually lost or gained or shared by atoms during the course of a chemical combination.
Pb⁴⁺ O²⁻
Combining power 4 2
Exchange of valencies 2 4
Now the molecular formula is Pb₂O₄
1. How is the atom count for each element on the reactant side of a balanced chemical equation related to the atom count for each element on the product side of the same equation?
Answer: The atom count for each element on the reactant side of a balanced chemical equation is equal to the atom count for each element on the product side of the same equation
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products formed must be equal to the mass of reactants taken.
In order to get the same mass on both sides, the atoms of each element must be balanced on both sides of the chemical equation.
[tex]2H_2+O_2\rightarrow 2H_2O[/tex]
Thus there are 4 atoms of hydrogen on reactant as well as product side.
Also there are 2 atoms of oxygen on reactant as well as product side.
sound travel through water at a speed of 1500 m/s. if the frequency of a sound is 1000 Hz, what is the wavelength?
Answer:
λ = 1.5 m
Explanation:
Given data:
Speed of wave = 1500 m/s
Frequency of sound = 1000 Hz
Wavelength of sound = ?
Solution:
Speed of wave = frequency × wavelength
by putting values,
1500 m/s = 1000 Hz × λ
λ = 1500 m/s / 1000 s⁻¹ (Hz = s⁻¹ )
λ = 1.5 m
Answer: 1.5
Explanation:
Well first you do
1500/ 1000= 1.5 which mean
The wavelength is 1.5
A student performed an investigation to determine if the rate of photosynthesis in elodea is affected by a higher than normal concentration of carbon dioxide gas in the water in which the plant is growing. After increasing the concentration of carbon dioxide in water, the student illuminated the plant with a light and collected the bubbles of oxygen gas that were given off from the cut end of the submerged plant. In this investigation, what would be the best indicator of the rate of photosynthesis? a a change in the color of the plant b an increase in the length of the elodea plant over a period of 12 hours c the amount of light that is transmitted through the water d the amount of oxygen collected over a period of 12 hours
Answer:
D. the amount of oxygen collected over a period of 12 hours
Explanation:
Photosynthesis is a metabolic reaction performed by the cells of plant. In this reaction, light is used as an energy source to combine carbon dioxide (CO2) and water (H2O) to produce glucose and oxygen gas (O2) as products. In every chemical reaction including photosynthesis, an increase in concentration of reactants will increase the rate of the reaction, which is evident in the amount of products formed.
According to this question where a student is performing an investigation to determine the relationship between a higher than normal concentration of carbon dioxide gas and the rate of photosynthesis. After increasing the concentration of carbon dioxide in water, the student illuminated the plant with a light and collected the bubbles of oxygen gas that were given off from the cut end of the submerged plant.
Based on the above explanation, the best indicator of the rate of photosynthesis in this investigation will be THE AMOUNT OF OXYGEN COLLECTED OVER A PERIOD OF 12 HOURS.
2. Convert 120.02g of FrBiz to moles
a. 0.19 moles
b. 5.34 moles
c. 76,932.82 moles
Answer:
PRACTICE MULTIPLE CHOICE QUESTIONS FROM UNIT 10
1.) A cylinder is filled with 2.00 moles of nitrogen, 3.00 moles of argon, and 5.00 moles of helium. If
the gas mixture is at STP, what is the partial pressure of the argon?
(A) 152 torr (B) 228 torr (C) 380. torr (D) 760. torr
2.) Compared to the average kinetic energy of 1 mole of water at 0 oC, the average kinetic energy
of 1 mole of water at 298 K is
(A) the same, and the number of molecules is the same
(B) the same, but the number of molecules is greater
(C) greater, and the number of molecules is greater
(D) greater, but the number of molecules is the same
3.) If the pressure on a given mass of gas in a closed system is increased and the temperature
remains constant, the volume of the gas will
(A) decrease (B) increase (C) remain the same
4.) Which gas has approximately the same density as C2H6 at STP?
(A) NO (B) NH3 (C) H2S (D) SO2
5.) At a temperature of 273 K, a 400. milliliter gas sample has a pressure of 760. millimeters of
mercury. If the pressure is changed to 380. millimeters of mercury, at which temperature will
this gas sample have a volume of 551 milliliters?
(A) 100 K (B) 188 K (C) 273 K (D) 546 K
Get the answers to these questions
Back to the Unit 10 Old Tests Pag
Why do scientist use the scientific method
Answer:
B
Explanation:
scientists always look for evidence
Answer:
Yea its B
Explanation: The person above me legit toke the answer out of my mouth
The picture below shows the positions of the Earth, Moon, and Sun during an eclipse.
What is true of the eclipse shown in the picture?
A.
It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
B.
It is a solar eclipse, in which the Earth casts a shadow on the Moon.
C.
It is a lunar eclipse, in which the Moon casts a shadow on the Earth.
D.
It is a solar eclipse, in which the Moon casts a shadow on the Earth.
Answer:
it is option c liner eclipse
Answer:
A-It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
30g of solute is dissolved in 100g of water. Calculate its % (m/m) concentration.
Answer:
23%
Explanation:
what is the empirical formula for 27.3% and 72.7% oxygen?
Answer:
27.3% of Carbon (C), 72.7% of Oxygen (O).
A heterogeneous mixture that has very small dispersed particles and stays mixed for a long time is a____. it for science class
What is the frequency of light with a wavelength of 3.2 x 10^-16 m?
Answer:
f = 0.94 ×10²⁴ Hz
Explanation:
Given data:
Frequency of light = ?
Wavelength of light = 3.2 ×10⁻¹⁶ m
Solution:
Formula:
Speed of light = wavelength × frequency
c = λ × f
c = speed of wave = 3×10⁸ m/s
by putting values,
3×10⁸ m/s = f × 3.2 ×10⁻¹⁶ m
f = 3×10⁸ m/s / 3.2 ×10⁻¹⁶ m
f = 0.94 ×10²⁴ s⁻¹
f = 0.94 ×10²⁴ Hz (Hz = s⁻¹)
Which of the following correctly shows the relationship, in terms of number of particles, of the three substances?
A. 1 mole of water < 1 mole of helium < 1 mole of aluminum
B. 1 mole of aluminum = 1 mole of helium = 1 mole of water
C. 1 mole of aluminum < 1 mole of helium < 1 mole of water
D. 1 mole of helium < 1 mole of aluminum < 1 mole of water
The correct option which shows the relation between particles of the three substances is 1 mole of aluminum = 1 mole of helium = 1 mole of water.
What is a particle?
A particle is a small part of matter.
The term refers to particles of all sizes, ranging from subatomic particles like electrons to visible particles like dust particles floating in sunlight.
The relationship of a number of particles of the substance can be calculated by Avogadro's law
Thus, the correct option is B. 1 mole of aluminum = 1 mole of helium = 1 mole of water
Learn more about particles
https://brainly.com/question/1685421
A breeder reactor is one type of nuclear reactor. In a breeder reactor, uranium-238 is transformed in a series of nuclear reactions into plutonium-239.
The plutonium-239 can undergo fission as shown in the equation below. The X represents a missing product in the equation.
Compare the amount of energy released by completely fissioned plutonium-239 to the amount of energy released by the complete combustion of the same amount of coal.
Answer:hope this help
Explanation:
If I have ten eggs and lots of milk, flour and oil, how many
crepes can I make?
Answer:
I'd say about 8?
Explanation:
if you wanna make them huge make about 6
Electrons are arranged in orbits called energy levels. The Gizmo shows all of the
first two energy levels but only part of the third energy level.
A. How many electrons can fit in the first energy level?
B. How many electrons can fit in the second energy level?
C. How many electrons fit in the part of the third energy level shown?
Answer:
A is 2, B is 8, and C is 18
Explanation:
I did the Gizmos
The two, eight, and eighteen electrons can be filled in the first, second, and third energy levels respectively.
What are the energy levels?The electrons revolve in different orbits are known as energy levels or stationary states. These energy levels are numbered as n = 1, 2, 3…… These values are also known as the principal quantum numbers.
The first energy level is also known as 'K' shell or level. The second energy level is called 'L' shell, the third energy level is 'M' shell, and so on.
The electrons present in the K shell contain the least energy whereas the levels contain more energy that is far from the nucleus.
The first energy level (n = 1) can have maximum two electrons in it. The second energy level ( n= 2) can have maximum eight electrons and the third energy level can fill maximum eighteen electrons in it.
Learn more about energy levels, here:
https://brainly.com/question/17396431
#SPJ5
what is one example of a electromagnetic wave
Answer:
Examples of EM waves are radio waves, microwaves, infrared waves, X-rays, gamma rays, etc.
Answer:
Electromagnetic waves can be split into a range of frequencies. This is known as the electromagnetic spectrum. Examples of EM waves are radio waves, microwaves, infrared waves, X-rays, gamma rays, etc.
Explanation:
What do the red arrows represent
Answer:
There are three forces acting on the skateboard. One of these forces is the weight of the rider. Another is the force of gravity on the board itself. The third is the force of the ground pushing up on the skateboard.
a sample of methane gas at a pressure of 0.727 atm and a temperature of 26.9 occupies a volume of 726 ml. if the gas is allowed to expand at constant temperature until its pressure is 0.412 atm, the volume of the gas sample will be _ mL
Answer:
1280L
Explanation:
Given parameters:
Initial pressure = 0.727atm
Temperature = 26.9°C
Initial volume = 726mL = 0.726L
New pressure = 0.412atm
Unknown:
New volume of the gas sample = ?
Solution:
To solve this problem, we apply boyles law;
P1V1 = P2V2
P and V are pressure and temperature
1 and 2 are initial and new state
0.727 x 0.726 = 0.412 x V2
V2 = 1.28mL = 1280L
A 1.0 kg ball is thrown into the air and initial velocity of 30 mi./s how high into the air did the ball travel
Answer:
45.9m
Explanation:
Given parameters:
Mass of the ball = 1kg
Initial velocity = 30m/s
Unknown:
Height the ball will travel = ?
Solution:
At the maximum height, the final velocity of the ball will be 0;
Using ;
V² = U² - 2gh
V is the final velocity
U is the initial velocity
g is the acceleration due to gravity
h is the height
0² = 30² - (2 x 9.8 x h)
0 = 900 - 19.6h
h = 45.9m
How many moles are in 8.63 x 103 atoms of Li?
1.43 × 10⁻²⁰ mol Li
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
8.63 × 10³ atoms Li
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 8.63 \cdot 10^3 \ atoms \ Li(\frac{1 \ mol \ Li}{6.022 \cdot 10^{23} \ atoms \ Li})[/tex]Multiply/Divide: [tex]\displaystyle 1.43355 \cdot 10^{-20} \ moles \ Li[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
1.43355 × 10⁻²⁰ mol Li ≈ 1.43 × 10⁻²⁰ mol Li