the philosophy of confucius is pragmatic; its principle concern is

The L3 cache addressing organization consists of a 13-bit tag, 11-bit cache index, and 6-bit block offset.

The addressing organization of the L3 cache for a four-core i7 with an 8 MB cache, 16-way set associative, and a block size of 64 bytes can be explained as follows:

With a 30-bit block address and 6-bit block offset, we can calculate the cache index and tag bits.

Since there are 64 bytes in a block, 2^6 = 64, making the offset 6 bits.

The cache size is 8 MB or 8 * 2^20 bytes, and there are 16 sets per block, which means there are (8 * 2^20) / (64 * 16) = 2^11 sets in the cache.

Therefore, the cache index is 11 bits.

Finally, the tag bits can be calculated as 30 - 6 - 11 = 13 bits.

Learn more about the cache at https://brainly.com/question/16971099

#SPJ1

The new bar coding technique is primarily used for efficiently tracking and managing inventory, improving the accuracy of data collection, and enhancing supply chain operations.

The new bar coding technique streamlines the process by providing quick and accurate scanning of product information, reducing manual data entry errors, and increasing overall productivity in various industries.

Bar codes provide a unique identifier for each item, which can be scanned using barcode readers or mobile devices equipped with barcode scanning capabilities. By scanning barcodes, businesses can efficiently track inventory, monitor stock levels, automate checkouts, and improve overall supply chain management.

The primary purpose of barcoding in industries such as retail, manufacturing, logistics, and healthcare is to streamline operations, reduce errors, enhance inventory accuracy, and facilitate efficient product identification and tracking.

Bar coding systems enable faster data entry, reduce manual data entry errors, and provide real-time visibility into stock levels, enabling organizations to optimize inventory management and improve overall efficiency.

To learn more about bar coding: https://brainly.com/question/13646391

#SPJ11

Right. If a node x is a descendant of node y and x is an in-order successor of y, then node x must appear in y's right subtree.

In a binary search tree (BST), the in-order traversal visits the nodes in ascending order. For any given node y in the BST, its left subtree contains all the nodes with smaller values, and its right subtree contains all the nodes with larger values.

If a node x is a descendant of node y, it means that x is either y itself or x is located in one of y's subtrees. Since x is an in-order successor of y, it implies that x has a larger value than y, and all the nodes in the left subtree of y (including y itself) have already been visited during the in-order traversal.

Therefore, if x is an in-order successor of y, it cannot be located in y's left subtree because all the nodes in the left subtree have already been visited. It must be located in y's right subtree, as the values in the right subtree are larger than the value of y and are yet to be visited in the in-order traversal.

Hence, the node x must appear in y's right subtree if it is an in-order successor of y.

In summary, when a node x is a descendant of node y and x is an in-order successor of y in a binary search tree, x is guaranteed to be present in y's right subtree.

To learn more about binary search tree, click here: brainly.com/question/30391092

#SPJ11

The normalized base 2 floating-point representation of 7.5 is 1.875 x 2^2.

To convert 7.5 to a normalized base 2 floating-point number, we need to express it as a fraction multiplied by a power of 2. Since 7.5 can be written as 15/2,

we have 15/2 = 1.875. The power of 2 is determined by the number of times we divide the fraction by 2 until we reach a value between 1 and 2. In this case, we divide 1.875 by 2 twice, which gives us 1.875 x 2^2.

The IEEE 754 32-bit floating-point representation of 7.5 is 0x40F00000.

The IEEE 754 floating-point format specifies the representation of floating-point numbers in binary. The 32-bit format consists of three components: the sign bit, the exponent, and the significand (also known as the mantissa).

For the number 7.5, the sign bit is 0 since it is positive. The exponent is calculated by adding the bias value (127 for single-precision) to the binary representation of the exponent value. In this case, the exponent is 2 + 127 = 129,

which is represented in binary as 10000001. The significand is obtained by converting the fractional part of the normalized representation of 7.5 to binary, which is 111. The final representation is obtained by concatenating the sign bit, exponent, and significand, resulting in 0x40F00000.

The IEEE 754 32-bit floating-point representation of -7.5 is 0xC0F00000.

To represent -7.5, we follow a similar process as in question 2. The sign bit is 1 since it is negative. The exponent is still 2 + 127 = 129, represented as 10000001. The significand remains the same, which is 111.

The final representation is obtained by concatenating the sign bit, exponent, and significand, resulting in 0xC0F00000.

To know more about floating click here

brainly.com/question/31625629

#SPJ11

The psychologist Charles Spearman proposed the theory that intelligence is a single entity. Spearman's theory, known as the "g factor" theory, suggests that intelligence is a general cognitive ability that underlies various specific mental abilities. According to this view, individuals who perform well in one cognitive task are likely to perform well in other tasks as well, indicating a common underlying factor of general intelligence.

Spearman's theory was based on statistical analyses of intelligence test scores, where he observed positive correlations among different cognitive tasks. He proposed that these correlations could be explained by a single factor, the g factor, which represents the general intelligence common to all tasks.

It's worth noting that Spearman's theory has been debated and alternative theories of multiple intelligences have also been proposed, such as Howard Gardner's theory of multiple intelligences, which suggests that intelligence can be divided into different domains or modalities.

learn more about "cognitive":- https://brainly.com/question/3648034

#SPJ11

In IoT, two of the main functions of edge computing are a) reducing data at the edge that is forwarded to the applications and capturing data from devices.

This involves processing and analyzing data locally at the edge, instead of sending all the data to a centralized cloud or data center for processing. By processing data at the edge, we can reduce the amount of data that needs to be transmitted to the cloud, which can save bandwidth, reduce latency, and improve the overall performance of the system.

Edge computing also involves capturing data from IoT devices and sensors at the edge of the network. This involves collecting and pre-processing data from multiple sources, including sensors, cameras, and other devices, and analyzing the data in real-time to identify patterns, anomalies, and other insights. So the answer is: a) reducing data at the edge that is forwarded to the applications and capturing data from devices.

Learn more about edge computing: https://brainly.com/question/23858023

#SPJ11

TCP (Transmission Control Protocol) is a transport layer protocol that provides reliable transmission of data packets over IP networks.

It operates by establishing a connection-oriented session between two hosts and provides a reliable and ordered delivery of data packets.

TCP ensures reliability of packet delivery through the use of various mechanisms such as sequence numbers, acknowledgments, and retransmissions. When a sender transmits a data packet, it assigns it a unique sequence number.

The receiver sends an acknowledgment (ACK) message back to the sender indicating the successful receipt of the packet. If the sender does not receive an ACK message within a specific timeout period, it retransmits the packet.

TCP also uses flow control mechanisms to prevent congestion and avoid packet loss. The receiver advertises its buffer size to the sender, and the sender adjusts its transmission rate to avoid overwhelming the receiver. This ensures that packets are delivered at a rate that the receiver can handle.

Overall, TCP provides reliable packet delivery by ensuring that packets are transmitted in sequence, and lost or damaged packets are retransmitted. It also provides flow control mechanisms to avoid congestion and prevent packet loss, ensuring that data is delivered reliably and efficiently over IP networks.

Learn more about network here:brainly.com/question/29350844

#SPJ11

The native Linux printer sharing protocol is CUPS, which stands for Common Unix Printing System.

CUPS is an open-source printing system that provides a standardized interface for printing on Linux and other Unix-like systems. It supports a variety of printing protocols, including IPP (Internet Printing Protocol), LPD (Line Printer Daemon), and SMB (Server Message Block), as well as proprietary protocols such as HP JetDirect. CUPS allows multiple clients to share printers over a network, and it provides features such as job scheduling, printer discovery, and printer authentication. PPP (Point-to-Point Protocol) is a network protocol used to establish a direct connection between two computers, while NFS (Network File System) is a file-sharing protocol used to access files over a network. Neither of these protocols is specific to printer sharing on Linux.

Learn more about Linux printer here: brainly.com/question/14397363

#SPJ11

The maximum throughput achievable is 26.214 Mbps and the line efficiency is 2.62%.

A TCP machine sending full windows of 65,535 bytes over a 1-Gbps channel with a 10-msec one-way delay can achieve a maximum throughput by calculating the Bandwidth-Delay Product (BDP).

BDP = Bandwidth * Round-Trip Time (RTT). In this case, Bandwidth = 1 Gbps and RTT = 20 msec (10 msec one-way delay * 2).

Converting Gbps to bytes, we get 1,000,000,000 bits/8 = 125,000,000 bytes/sec.

Therefore, BDP = 125,000,000 * 0.02 = 2,500,000 bytes.

Since the TCP window size is 65,535 bytes, the maximum throughput achievable is (65,535/2,500,000) * 1 Gbps ≈ 26.214 Mbps.

The line efficiency is the ratio of maximum throughput to the available bandwidth, which is (26.214/1,000) * 100 ≈ 2.62%.

Learn more about TCP at https://brainly.com/question/29995253

#SPJ11

A pulse site at the neck is the carotid. The carotid artery is one of the major arteries in the body and is located on both sides of the neck. It supplies oxygenated blood to the brain, head, and neck. So option A is the correct answer.

The carotid pulse is commonly used to assess the strength and regularity of the heartbeat. It can be palpated by gently pressing the fingertips against the soft area just to the side of the windpipe in the neck. The carotid pulse is often easy to locate and has a distinct pulsation.

Healthcare professionals may check the carotid pulse during various medical procedures, including physical examinations, cardiac assessments, and in emergency situations to assess the circulation and detect abnormalities.

Overall, the carotid pulse is an important site for assessing the heartbeat and is often used for clinical evaluation and emergency interventions. So the correct answer is option A) carotid.

To learn more about pulse: https://brainly.com/question/11245663

#SPJ11

A reasonable address allocation for the network would be to use the Class B network address space, which provides 65,536 total IP addresses.

Each customer would be allocated a /19 subnet, which would provide 8,190 usable IP addresses per subnet.

The Class B network address space ranges from 128.0.0.0 to 191.255.255.255, with a subnet mask of 255.255.0.0. A /19 subnet mask would have a subnet mask of 255.255.224.0, which provides 8,190 usable IP addresses per subnet. This allocation would allow each customer to have 600 IP addresses with room for growth, while also providing a sufficient number of subnets to support additional customers if necessary.

You can learn more about IP addresses at

https://brainly.com/question/14219853

#SPJ11

The Linux platform that runs on mobile phones is called: b.Android

Android is an open-source OS for mobile devices based on Linux. Developed by Android Inc., later acquired by Go/o/gle. Android is a popular and adaptable platform for mobile devices. Android is Linux-based.

The Linux kernel manages processes, memory, devices, and security. Android is open-source, allowing developers to freely modify and distribute its source code. The open nature draws a vibrant developer community to improve Android.

Learn more about  Linux platform from

https://brainly.com/question/12853667

#SPJ4

False. RFID (Radio Frequency Identification) is a technology used for wireless communication between a tag (or transponder) and a reader.

It is commonly used for tracking and identifying objects, animals, and people in various industries, including retail, logistics, healthcare, and security. RFID tags can be attached to or embedded in objects and can store data that can be read by an RFID reader. However, RFID is not commonly used to transmit information between networked computers. Instead, other wireless technologies such as Wi-Fi, Bluetooth, and Ethernet are used for this purpose.

Learn more about RFID here: brainly.com/question/29993647

#SPJ11

The first step in the DRM process is to identify hazards.

This involves recognizing potential dangers, threats, or risks associated with a specific situation or environment. In this step, SGT Edwards would analyze the situation, gather information, and determine potential hazards that may affect the mission or personnel. DRM typically involves the use of codes that prohibit content copying or limit the number of devices a product can be accessed from. Content creators can also use applications to restrict what users can do with their material or encrypt digital media, which can then only be accessed by anyone with the decryption key.

Learn more about DRM: https://brainly.com/question/30195657

#SPJ11

To organize registry preference items, you can create a Group Policy Object (GPO).

A Group Policy Object is a container object in the Microsoft Windows operating system that allows administrators to manage various settings and configurations for users and computers within an Active Directory domain. GPOs can be used to define and deploy registry preference items, among other configuration settings. With a GPO, you can create and organize registry preference items by defining specific registry keys, values, and data that you want to enforce across targeted systems. These registry preferences can include creating, modifying, or deleting registry keys and values, setting permissions, configuring preferences for specific user or computer groups, and more.

Learn more about Group Policy Object here: brainly.com/question/31684784

#SPJ11

Mechanical hard drive has the largest potential capacity among the given storage devices.

Mechanical hard drives are traditional hard drives that use rotating disks and magnetic heads to store and retrieve data. These drives are capable of storing large amounts of data, with some models offering capacities of up to 16 terabytes or more.  In comparison, compact discs and thumb drives have much smaller capacities, with CDs typically storing up to 700 MB and thumb drives commonly ranging from 2 GB to 256 GB. Blu-ray discs, which are designed for high-definition video and data storage, have a maximum capacity of 100 GB. However, it is worth noting that solid-state drives (SSDs), which use flash memory instead of rotating disks, are becoming increasingly popular due to their faster read and write speeds and improved durability. While their capacity is still somewhat limited compared to mechanical hard drives, newer models are offering larger capacities of up to 30 terabytes.

Learn more about Mechanical hard drive here: brainly.com/question/23877016

#SPJ11

The sum and product of the numbers (2112)3 and (12100)3, expressed as base 3 expansions, are (13322)3 and (13102000)3, respectively.

To find the sum and product of the given numbers in base 3, we perform addition and multiplication following the rules of base 3 arithmetic.

For the sum, we add the corresponding digits of the two numbers from right to left. Starting from the rightmost digit, we have 2 + 0 = 2, 1 + 0 = 1, 1 + 1 = 2, 2 + 2 = 1 (with a carry of 1), and finally 1 + 1 + 1 = 1 (with a carry of 1). Therefore, the sum is (13322)3.

For the product, we multiply the corresponding digits of the two numbers from right to left. Starting from the rightmost digit, we have 2 × 0 = 0, 1 × 0 = 0, 1 × 1 = 1, 2 × 2 = 1 (with a carry of 1), and finally 2 × 1 = 2. Therefore, the product is (13102000)3.

In summary, the sum of (2112)3 and (12100)3 is (13322)3, and their product is (13102000)3, both expressed as base 3 expansions.

Learn more about numbers here:

brainly.com/question/15719537

#SPJ11

To disable the webconfigurator anti-lockout rule for HTTP, you need to log in to the web interface of your firewall or router. Then, navigate to the webconfigurator settings and find the option to disable the anti-lockout rule. This will allow you to access the webconfigurator even if you make too many failed login attempts. However, it is important to note that disabling this rule can make your system more vulnerable to brute force attacks, so use caution and ensure that you have strong login credentials in place.

1. To disable the webconfigurator anti-lockout rule for HTTP, follow these steps:

2. Log in to your pfSense firewall as an administrator.

3. Navigate to System > Advanced > Admin Access.

4. Scroll down to the "Anti-Lockout" section.

5. Uncheck the box labeled "Enable anti-lockout rule".

6. Click "Save" at the bottom of the page to apply the changes.

Disabling the webconfigurator anti-lockout rule for HTTP removes the default rule that prevents administrators from being locked out of the firewall. This can be useful in certain scenarios where the anti-lockout rule may interfere with network configuration or management tasks. However, it is important to ensure that adequate security measures are in place to prevent unauthorized access to the firewall.

Learn more about HTTP at:

https://brainly.com/question/17773134

#SPJ11

To prevent an organization's systems from being used as intermediaries in a broadcast amplification attack, the following defenses can be implemented Access Control

Access Control: Implement strict access control measures to prevent unauthorized access to the organization's systems. This includes strong authentication mechanisms,

such as two-factor authentication, and regularly updating and patching software and firmware to mitigate vulnerabilities that can be exploited in amplification attacks.

Network Filtering: Employ network filtering techniques, such as firewalls and intrusion detection systems, to monitor and filter incoming and outgoing network traffic.

This helps in identifying and blocking suspicious or malicious traffic that may be associated with amplification attacks. By setting up proper network filtering rules, organizations can prevent their systems from participating in or being used as amplifiers in such attacks.

Rate Limiting: Implement rate limiting mechanisms to control the rate of outgoing traffic from the organization's systems.

By imposing limits on the number of responses that can be sent in response to a single request, organizations can prevent their systems from generating excessive traffic that could be exploited in amplification attacks.

Network Segmentation: Segmenting the network into different security zones can help isolate critical systems from potential attackers and mitigate the impact of an amplification attack.

By implementing separate network segments for public-facing systems and internal infrastructure, organizations can minimize the risk of their systems being used as intermediaries in such attacks.

Monitoring and Response: Implement real-time monitoring and response mechanisms to detect and respond to suspicious activities. This includes monitoring network traffic, system logs, and network behavior to identify signs of amplification attacks or unauthorized use of systems.

Prompt response and mitigation can help prevent further propagation of the attack and protect the organization's systems from being exploited.

By implementing these defenses in combination, organizations can significantly reduce the risk of their systems being used as intermediaries in broadcast amplification attacks and ensure the security and integrity of their network infrastructure.

To know more about system click here

brainly.com/question/30146762

#SPJ11

The three cloud computing service delivery models are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS).

IaaS provides virtualized computing resources, such as virtual machines, storage, and networking infrastructure, allowing users to have control over their operating systems and applications while the underlying infrastructure is managed by the cloud provider.

PaaS offers a platform for developing, deploying, and managing applications. It provides pre-configured environments with development tools and services, allowing developers to focus on building applications while the cloud provider manages the underlying infrastructure and platform.

SaaS delivers software applications over the internet, enabling users to access and use them through web browsers or client applications. The cloud provider manages the entire software stack, including infrastructure, platform, and application, while users only need to subscribe and use the software.

These service models provide different levels of control and management for cloud resources, allowing organizations to choose the most suitable model based on their specific needs and requirements.

learn more about "development":- https://brainly.com/question/17019717

#SPJ11

Option C is not true about the Compact and Repair Database utility.

The Compact and Repair Database utility is a tool provided in Microsoft Access to help optimize database performance by compacting the database and repairing any potential errors or corruption.

It can be used to reduce the size of a database, especially if the database has been updated multiple times.

It can also help when the data in the database becomes corrupt or if the database is experiencing slow performance.

Additionally, the utility can be set up to run automatically when the database is closed or can be manually run by the user. However, the number of records in a database does not affect the need for or the use of the Compact and Repair Database utility.

Learn more about :  

Compact and Repair Database utility : brainly.com/question/13438917

#SPJ11

The statement that displays the address of the variable num1 is: d) cout << &num1;.

The symbol '&' before a variable name in C++ gives the memory address of that variable. So, the statement "cout << &num1;" will display the address of the variable num1. Option a) "cout << num1;" will display the value of the variable num1, not its memory address. Option b) "*num1" is invalid syntax because num1 is not a pointer variable. Option c) "cin >> &num1" will take the user input and store it in the memory location of num1, not display its address. Therefore, option d) is the correct choice as it will display the address of the variable num1. Finally, option e) is incorrect as one of the options given is the correct answer.

To learn more about invalid syntax click here: brainly.com/question/30403234

#SPJ11

The type of database replication that relies on centralized control to determine when replicas may be created and how they are synchronized with the master copy is option c: enterprise replication.

Enterprise replication involves a centralized control mechanism where a designated authority or system manages the creation and synchronization of replicas in a database environment. Option a, distributed database model, refers to a different concept where data is distributed across multiple nodes or sites. Option b, traditional database replication, is a broad term that can encompass different replication methods, not necessarily relying on centralized control. Option d, local database model, is not directly related to replication but could refer to a database model where data is stored locally on a single system.

Learn more about enterprise replication here:

https://brainly.com/question/28294568

#SPJ11

When considering using an .edu website as a source for your presentation, it is important to evaluate the credibility and reliability of the information provided.

The .edu domain is reserved for educational institutions in the United States, which means that the website you are using is likely to have information that has been written by experts in their field. This can help you establish that the information is accurate and trustworthy. Additionally, the fact that the website is affiliated with an educational institution can indicate that the information has been peer-reviewed and has undergone a rigorous screening process. This can further establish the credibility of the information. However, it is still important to critically evaluate the information you find on the website and ensure that it is relevant to your presentation topic. You should also consider whether the information is up-to-date and whether there are any biases that could affect the accuracy of the information.

To know more about website visit:

https://brainly.com/question/19459381

#SPJ11

The fingerprint generated with Kleopatra certificate is a unique identifier created using a cryptographic hashing algorithm. A cryptographic hash function takes the contents of the certificate and produces a fixed-size hash value that uniquely represents the certificate.

The fingerprint is derived from the public key and other information in the certificate, ensuring the authenticity and integrity of the certificate. When using Kleopatra, a certificate management tool, you can view and verify fingerprints to ensure secure communication between parties.

The fingerprint serves as a unique identifier for the certificate and is commonly used for verification and identification purposes. It allows users to verify the integrity of the certificate by comparing the fingerprint with the expected value.

By comparing the fingerprint of a certificate with the expected value, users can ensure the certificate has not been tampered with and verify its authenticity.

To learn more about fingerprint: https://brainly.com/question/30348030

#SPJ11

The output of the given Python code fragment is:

1

4

The code fragment utilizes a for loop to iterate through the range from 1 to 3 (exclusive). In each iteration, the value of k is multiplied by itself using the multiplication operator (*) and then printed using the print() function.

In the first iteration, k takes the value 1. When 1 is multiplied by itself, the result is 1. Therefore, the output of the first iteration is 1.

In the second iteration, k takes the value 2. When 2 is multiplied by itself, the result is 4. Hence, the output of the second iteration is 4.

After the second iteration, the for loop terminates because the range ends at 3 (exclusive). Thus, the code prints the calculated values of k * k, resulting in the output:

1

4

Each number appears on a separate line due to the newline character inserted by the print() function.

to learn more about Python code click here:

brainly.com/question/26104476

#SPJ11

To implement a detective control for enhanced security during an attack, start by identifying key security events and indicators that can help detect potential threats or breaches.

To implement a detective control in a security review meeting, take the following actions:

1. Identify key security events and indicators.

2. Implement logging and monitoring systems.

3. Configure alerts for suspicious activities.

4. Establish incident response procedures.

5. Conduct regular log analysis and audits.

To implement a detective control for enhanced security during an attack, start by identifying key security events and indicators that can help detect potential threats or breaches. Next, implement logging and monitoring systems that can capture and store relevant security logs and data. Configure alerts within these systems to notify responsible personnel when suspicious activities are detected.

Establish clear incident response procedures to ensure a swift and effective response to any security incidents. Regular log analysis and audits should be conducted to identify patterns, anomalies, or potential weaknesses in the security infrastructure. By implementing these actions, an organization can proactively detect and respond to security threats, minimizing potential damage and enhancing overall security posture.

To learn more about monitoring systems click here

brainly.com/question/13369289

#SPJ11

A Smartbook is an electronic textbook that adapts to a student's learning needs and provides personalized content. The main phases of a Smartbook are typically broken down into three key components:

1. Pre-assessment: This initial phase involves assessing the learner's prior knowledge and understanding of the subject matter. The Smartbook uses a series of questions or activities to gauge the student's strengths and weaknesses, allowing it to tailor the learning experience accordingly.
2. Adaptive learning: Based on the pre-assessment, the Smartbook adapts its content to provide targeted learning resources for the student. This can include text, multimedia, quizzes, and interactive activities designed to address the learner's specific needs.
3. Post-assessment: Upon completing the adaptive learning phase, the Smartbook tests the learner's understanding and mastery of the subject matter through a post-assessment. This provides feedback on the student's progress and allows for any necessary adjustments to the learning experience.
In summary, a Smartbook is broken into three main phases: pre-assessment, adaptive learning, and post-assessment. This adaptive process allows the Smartbook to deliver personalized learning experiences tailored to the individual student's needs, promoting efficient and effective learning.

Learn more about components here

https://brainly.com/question/28351472

#SPJ11

An IP address is a series of four 8-bit numbers that represent a computer on a network. There are two versions of IP addresses: IPv4 and IPv6. IPv4, the most widely used version, uses a 32-bit address format and can support approximately 4.3 billion unique IP addresses.

An IP (Internet Protocol) address is a unique identifier assigned to each device connected to a network. It consists of four sets of numbers separated by periods, with each set ranging from 0 to 255. For example, an IP address could be 192.168.0.1.

An IP address plays a crucial role in computer networking, as it allows devices to communicate with each other over a network. When a device sends data over the internet, it includes its IP address so that other devices know where the data is coming from. IP addresses can be assigned dynamically (changing each time a device connects to the network) or statically (manually assigned and remains the same).   IPv6, on the other hand, uses a 128-bit address format and can support an almost limitless number of unique IP addresses. As the number of devices connected to the internet continues to grow, the transition to IPv6 is becoming increasingly necessary to avoid running out of available IP addresses.

To know more about IP address visit :-

https://brainly.com/question/31171474

#SPJ11

The code fragment that will throw a custom-designed exception called MilesOutORangeException, if the miles is out of the range of 0.0 to 999.90, can be written as follows:

if (miles < 0.0 || miles > 999.90) {
   throw new MilesOutORangeException("Price is out of the range.");
}

This code checks if the value of miles is less than 0.0 or greater than 999.90. If it is, then it throws a new instance of the MilesOutORangeException with the message "Price is out of the range." This is done using the throw keyword.

To handle this exception, a catch block can be added to the program that matches this exception and displays the exception message "Price is out of the range." This can be done as follows:

try {
   // Code that uses the miles variable
} catch (MilesOutORangeException e) {
   System.out.println(e.getMessage());
}

The try block contains the code that uses the miles variable, and the catch block catches the MilesOutORangeException and displays its message using the getMessage() method. This way, if the miles variable is out of the range, the program will throw the custom exception and display the appropriate error message.

Learn more about code fragment here:

brainly.com/question/13566236

#SPJ11