The particles in.......... can be separated from
heterogeneous mixtures by passing the mixture through a filter.
-suspension
-solution
-colloid
-pure substance

Answer:

carboxylic acid

Explanation:

i think so

pls mrk me brainliest

Answer: The balanced chemical equation for the reaction is:

Mg + 2 HCl → MgCl2 + H2

The molar ratio between MgCl2 and Mg is 1:1, which means that for every 1 mole of Mg that reacts, 1 mole of MgCl2 is produced. Therefore, the number of moles of MgCl2 produced can be calculated by simply using the same number of moles of Mg that reacts.

Given that 2.55 mol of Mg is reacting, the number of moles of MgCl2 produced can be calculated as:

2.55 mol Mg × (1 mol MgCl2/1 mol Mg) = 2.55 mol MgCl2

Now, to convert moles of MgCl2 to grams, we need to multiply the number of moles by the molar mass of MgCl2, which is 95.21 g/mol.

2.55 mol MgCl2 × 95.21 g/mol = 242.89 g MgCl2

Therefore, 2.55 mol of Mg will produce 242.89 g of MgCl2.

Explanation:

Answer:Therefore, there are approximately 2.38 moles of nitrogen gas inside the fully inflated airbag

Explanation:

To calculate the number of moles of nitrogen gas inside the fully inflated airbag, we can use the Ideal Gas Law:

PV = nRT

where P is the absolute pressure of the gas (in atmospheres), V is the volume of the gas (in liters), n is the number of moles of gas, R is the universal gas constant (0.08206 L atm/mol K), and T is the temperature of the gas (in Kelvin).

We know that the volume of the airbag is 58 liters and the absolute pressure is 1.30 atmospheres (which includes the atmospheric pressure of 1 atmosphere). We also know that the temperature inside the airbag is likely to be close to the ambient temperature, which we can assume is around 25°C or 298 K.

So, we can rearrange the Ideal Gas Law to solve for n:

n = PV/RT

n = (1.30 atm * 58 L) / (0.08206 L atm/mol K * 298 K)

n = 2.38 moles

Therefore, there are approximately 2.38 moles of nitrogen gas inside the fully inflated airbag.

Diffusion and aeration, photosynthesis, respiration, and decomposition all have an ongoing impact. In addition to fluctuating dissolved oxygen levels caused by temperature, salinity, and pressure fluctuations.

In comparison to warm water, cold water can hold more dissolved oxygen. The concentration of dissolved oxygen is highest in the winter and early spring when the water temperature is low. The concentration of dissolved oxygen is frequently lower in the summer and fall when the water temperature is high.

Water molecules receive energy as a result of rising water temperatures, which in turn causes gas and water molecules to gain more energy. This increased energy dissolves the water and oxygen molecules' weak molecular bonds, allowing oxygen to escape.

To know more about decomposition visit-

https://brainly.com/question/8009068

#SPJ1

The dodo's extinction was a change that the ecosystem of Mauritius was not able to recover from.

One example of a change that an ecosystem was not able to recover from is the extinction of dodo bird in Mauritius.

The dodo bird was a flightless bird that was native to Mauritius, an island in Indian Ocean. When humans arrived on the island in 16th century, they brought with them non-native animals such as pigs, rats, and monkeys, which preyed on dodo's eggs and competed with bird for food.

The dodo had no natural predators on the island and was not adapted to defend itself against the new threats posed by these introduced species. As a result, dodo population declined rapidly and was completely extinct by the end of 17th century.

To know more about ecosystem, refer

https://brainly.com/question/842527

#SPJ1

Therefore, if all of the molecular chlorine in the reaction is consumed to form hydrogen chloride, 25.69 grams of hydrogen chloride are produced.

A reaction is a process in which one or more substances (the reactants) are transformed into one or more different substances (the products). Chemical reactions involve the breaking and forming of chemical bonds, resulting in the rearrangement of atoms and the formation of new compounds. Reactions can be classified as physical or chemical, depending on whether or not a chemical change occurs.

Here,

The balanced chemical equation for the reaction between molecular chlorine (Cl₂) and hydrogen gas (H₂) to form hydrogen chloride (HCl) is:

Cl₂ + H₂ → 2HCl

This equation tells us that one mole of Cl₂ reacts with one mole of H₂ to produce two moles of HCl.

To determine the amount of HCl produced from 25 grams of Cl₂, we need to convert the mass of Cl₂ to moles using its molar mass:

molar mass of Cl₂ = 2 x atomic mass of Cl = 2 x 35.45 g/mol = 70.90 g/mol

moles of Cl₂ = (mass of Cl₂) / (molar mass of Cl₂) = 25 g / 70.90 g/mol = 0.352 mol

Since the mole ratio of Cl₂ to HCl is 1:2, the number of moles of HCl produced is twice the number of moles of Cl2:

moles of HCl = 2 x moles of Cl₂ = 2 x 0.352 mol = 0.704 mol

Finally, we can convert the moles of HCl to grams using its molar mass:

molar mass of HCl = atomic mass of H + atomic mass of Cl = 1.01 g/mol + 35.45 g/mol = 36.46 g/mol

Finally, we can use the molar mass of HCl to convert the number of moles to grams:

0.704 mol HCl x 36.46 g/mol = 25.69 g HCl

To know more about reaction,

https://brainly.com/question/30564957

#SPJ9

The inscribed polygon method for predicting aromaticity involves placing a polygon with one of its flat sides down and drawing a circle that touches all the vertices.

Molecular orbitals (MOS) below the center of the circle are bonding orbitals, and MOS above the center are antibonding orbitals. At each vertex where the polygon touches the circle, a line is drawn corresponding to a molecular orbital. Aromatic systems have all bonding MOS and homos (highest occupied molecular orbitals) completely filled with no unpaired electrons. This is done by placing one electron in each bonding orbital, then pairing up.

Learn more about Molecular orbitals: https://brainly.com/question/29750386

#SPJ11

The following are the correct options that describe the inscribed polygon method for predicting aromaticity:

The inscribed polygon method is a popular approach for predicting the aromaticity of a compound. The polygon's vertices represent the atoms of the compound, and the bond orbitals are represented by the lines. It is a cyclic arrangement of atoms with alternating single and double bonds that are more stable than their nonaromatic counterparts due to electronic delocalization. Aromaticity is a significant concept in organic chemistry because of its importance in the properties and reactivity of many organic molecules.

Learn more about aromaticity here: https://brainly.com/question/29497803

#SPJ11

The internal energy change and temperature change for the two processes involving 1 mole of an ideal monatomic gas for (a) ΔU = 3200 J, ΔT = 256.7 K and for (b) ΔU = -3200 J, ΔT = -256.7 K.

The internal energy change and temperature change for the two processes involving 1 mole of an ideal monatomic gas  can be computed using the following formula:

ΔU = Q - W

Where ΔU is the internal energy change, Q is the heat added or taken away from the gas, and W is the work done by or on the gas.

For process (a), 3200 J of heat are added to the gas and the gas does no work and no work is done on the gas. Therefore, the internal energy change is:

ΔU = Q - W = 3200 J - 0 = 3200 J

The temperature change can be computed using the following formula:

ΔT = ΔU / (n * Cv)

Where ΔT is the temperature change, ΔU is the internal energy change, n is the number of moles of gas, and Cv is the molar heat capacity at constant volume.

For an ideal monatomic gas, Cv = 3/2 R, where R is the gas constant. Therefore, the temperature change is:

ΔT = 3200 J / (1 mol * 3/2 * 8.314 J/mol*K) = 256.7 K

For process (b), 3200 J of work are done on the gas and the gas does no work and no heat is added or taken away from the gas. Therefore, the internal energy change is:

ΔU = Q - W = 0 - 3200 J = -3200 J

The temperature change can be computed using the same formula as above:

ΔT = -3200 J / (1 mol * 3/2 * 8.314 J/mol*K) = -256.7 K

Therefore, the internal energy change and temperature change for the two processes are:

(a) ΔU = 3200 J, ΔT = 256.7 K
(b) ΔU = -3200 J, ΔT = -256.7 K

To know more about internal energy change, refer here:

https://brainly.com/question/13025271#

#SPJ11

Increasing flexibility: CF4 < SO3 < CO2 < PH3 < H2O < HCN < CO

Increasing strength: CF4 < CO2 < SO3 < PH3 < H2O < HCN < CO

Explanation:

Answer: they would decrease the speed and collisions of the gas particles

Explanation:

This is because the particles slow down as the temperature decreases and would also effect the volume of the ballon making it deflate a bit as not as much volume is needed anymore.

Moreover, the S²⁻ion is bigger than a neutral S atom in size. Because there are more electrons in the S²⁻ionion than protons, there is less nuclear attraction on the valence electrons.

At times, John Dalton was referred to as the originator of contemporary atomic theory. He postulated that all atoms of a certain element had the same size and mass in 1803. According to John Dalton, elements are made up of smaller atoms. The atomic theory of matter resulted from this.

Everything, that's correct. Matter includes all liquids, solids, sand, plants, animals, and clouds. The building components of matter are called atoms. Every matter is made up of numerous atoms, similar to how a house is built of many bricks.

To know more about Atoms visit:

https://brainly.com/question/30898688

#SPJ1

The IR spectrum of an unknown compound displays considerable stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh).

The significant stretches at 3353 cm-1 (m, br) and 2900 cm-1 (s, sh) indicate that the compound could be an alcohol. This is because, in the infrared (IR) spectrum, the functional group -OH (hydroxyl group) of alcohols gives a strong peak at approximately 3200 to 3500 cm-1, which is a broad, intense peak. The peak intensity is determined by the number of -OH groups in the alcohol.In addition, the peak at 2900 cm-1 corresponds to a C-H bond, most likely the CH stretch of an aliphatic (saturated) hydrocarbon. As a result, the compound may be an aliphatic alcohol, which has the formula CnH2n+1OH, where n is any integer greater than or equal to one. Some possible examples of such alcohols include methanol (CH3OH), ethanol (C2H5OH), and propanol (C3H7OH).

Know more about compound displays

https://brainly.com/question/28587527

#SPJ11

The correct option is D:atoms with high electronegativities will not lose electrons, so instead they share electrons to reach a stable number of valence electrons

What do we mean by covalent bond-

A covalent bond is a chemical bond in which two atoms share electrons in such a way that they both attain a noble-gas configuration.

The sharing of valence electrons between atoms is known as a covalent bond.Some atoms lacks or has an extra electron in its outermost state,gaining or losing an electron from their outermost state can lead to stable configuration of both the species reducing their energy levels.Covalent bond is formed between an electronegative species(reciever) and electropositive species(donor),in which the electron is shared.

Learn more about covalent bond : https://brainly.com/question/3447218

#SPJ11

A sample lab report form based on the given parameters is given below:

Title: Investigating the Efficiency of Solar Panels in a Residential Setting

Introduction:

The purpose of this experiment was to investigate the efficiency of solar panels in a residential setting. The primary focus was on analyzing the output power of the solar panels under various conditions, such as the angle of incidence of sunlight and the distance from the light source.

Problem and Constraints:

The main problem was to ensure that the experiment was conducted in a controlled environment to obtain accurate results. Other constraints included the availability of equipment and weather conditions.

Plan and Design:

To conduct this experiment, a small-scale solar panel was set up in a controlled environment. The experiment involved measuring the output power of the solar panel under different conditions, including the angle of incidence of sunlight and the distance from the light source. The data collected was analyzed using statistical methods.

Procedure:

The solar panel was placed in a location where it would receive sunlight throughout the day. The angle of incidence was varied using an adjustable stand. The distance from the light source was also varied by moving the solar panel closer or farther from the light source. The output power of the solar panel was recorded at each variation of the angle of incidence and distance.

Evaluation and Revision:

The results showed that the efficiency of the solar panel decreased as the angle of incidence of sunlight increased. Similarly, as the distance from the light source increased, the efficiency of the solar panel decreased. Based on these results, we revised our experiment by adjusting the position of the solar panel to optimize its output power.

Conclusion:

In conclusion, the experiment successfully investigated the efficiency of solar panels in a residential setting. The results showed that the angle of incidence of sunlight and the distance from the light source significantly affect the efficiency of the solar panel. Further studies could be conducted to investigate the efficiency of solar panels under various weather conditions.

Read more about lab reports here:

https://brainly.com/question/20003985

#SPJ1

A potent analytical method used to ascertain the structure, make-up, and dynamics of molecules is nuclear magnetic resonance (NMR).

In NMR spectroscopy, the magnetic characteristics of molecule nuclei are measured in order to ascertain the structure of the molecule. The chemical shifts and coupling constants of the two isomers of stilbene, e-stilbene and z-stilbene, can be distinguished using NMR spectroscopy. The coupling constants are interactions between the spins of various nuclei, and the chemical shift is the shift in a nucleus' resonance frequency from a common reference frequency. The structure and relative concentrations of e- and z-stilbene in a sample can be determined using NMR spectroscopy.

learn more about isomers Refer:brainly.com/question/12796779

#SPJ1

The ΔH for the reaction [tex]NO (g) + O (g) = > NO^2 (g)[/tex] is 154kJ.

To calculate this, we need to add the ΔH values from the other reactions:
[tex]NO (g) + O^{3} (g)[/tex]→[tex]NO^{2} (g) + O^2(g)[/tex], ΔH =-199 kJ
[tex]O^3 (g)[/tex]→[tex]32O^2[/tex] (g), ΔH =-142 kJ

[tex]O^2[/tex] (g)→2O (g), ΔH =+495 kJ

Therefore, the ΔH for the reaction [tex]NO (g) + O (g) = > NO^2[/tex] (g) is:

(-199 kJ) + (-142 kJ) + (495 kJ) = 154kJ

First, we need to reverse the third reaction:

[tex]2O (g) = > O^2[/tex] (g), ΔH = -495 kJ

Now, we can add the first and the reversed third reactions to cancel out the O2 term and get the given reaction:

[tex]NO (g) + 2O (g) = > NO^2 (g)[/tex], ΔH = -199 kJ - (-495 kJ) = +296 kJ

Finally, we can use the second reaction to convert the ozone term to oxygen:

[tex]O^3 (g) = > 3O^2 (g)[/tex], ΔH = -142 kJ (multiply by 3 to cancel out the O2 term)

[tex]3O (g) = > O^3 (g)[/tex], ΔH = +142 kJ (reverse the equation)

Adding this equation to the previous one, we get:

[tex]NO (g) + O (g) = > NO^2 (g)[/tex], ΔH = +296 kJ + (-142 kJ) = 154 kJ

The ΔH for the given reaction is 154 kJ.

For more question on reactions click on

https://brainly.com/question/11231920

#SPJ11

A four-beam balance is a laboratory instrument used to measure the mass of an object.

Although this kind of balancing is relatively easy to use and accurate, there are a few difficulties with it:

The scale's precise value can be challenging to read. A four-beam balance's beams might be challenging to read precisely, mainly if the value is in the middle of two markings. Especially for small or light things, this can make it challenging to take precise measurements.

Manual adjustment is needed. The user must manually reposition the beams until they balance in order to use a four-beam balance. This process can take a while, especially when dealing with things whose weight or shape is asymmetrical. To maintain accurate readings, the balance might also need to be adjusted on a regular basis.

Overall, a four-beam balance has limitations that can make it challenging to use in some circumstances, even if it can be a valuable tool for determining the mass of things in a laboratory.

To learn more about Beam balance:

https://brainly.in/question/11158465

A 4 beam balance is a type of weighing scale that typically consists of four beams: two counterbalancing beams, a center beam, and a rider.

The center beam and the rider are used to indicate the weight of the object being weighed. While a 4 beam balance is a relatively simple instrument, there are a few things that can make using it difficult:

Reading the scale: One of the most challenging aspects of using a 4 beam balance is reading the scale accurately. The rider must be moved along the center beam until it balances with the object being weighed. This process can be tricky, as the rider can be very sensitive to even the slightest movements.

Calibration: Another potential difficulty with using a 4 beam balance is calibration. Over time, the scale may become unbalanced or the beams may become bent, which can cause inaccurate readings.

Calibrating the scale can be a time-consuming and delicate process, requiring a steady hand and a good eye for detail. If the scale is not calibrated properly, it may not provide accurate measurements, which can be a problem if precise weights are needed.

Learn more about beams here:

https://brainly.com/question/21441738

Answer: A..(studying how the mayfly population affects the number of trout in a stream)

Uncovering the genetic makeup of the eastern cottontail rabbit would be directly related to the science of ecology.

Option D is correct.

Human science, population, community, ecosystem, and biosphere are all parts of ecology, which is a branch of science. The study of organisms, their environment, and how they interact with one another and their environment is known as ecology.

The relationship between living things, like humans, and their physical environment is known as ecology. It aims to comprehend the crucial connections between animals and plants and the environment in which they live.

Which situation would be directly related to the science of ecology?

A. studying how the mayfly population affects the number of trout in a stream

B. studying how the mayfly population affects the number of trout in a stream

C. developing strains of corn that can withstand a combination of drought and high winds

D. uncovering the genetic makeup of the eastern cottontail rabbit

E. learning about foods that benefit the heart and blood vessels

Learn more about ecology:

brainly.com/question/1186120

#SPJ1

Answer:

Sodium chloride

Explanation:

Sodium chloride is an electrolyte, as is any soluble ionic compound.

Sugar, glucose, and alcohol are not electrolytes because they do not dissociate into ions when dissolved in water. Instead, they remain as intact molecules.

We can see that the closest molar mass to 3.93 g/mol is that of Lithium (Li) which is 6.94 g/mol.

Therefore, the element is Lithium (Li).

To determine the element, we need to use the molar mass of each element to find the number of moles present in the sample. We can then compare the number of moles to the Avogadro's number to determine the number of atoms.

The molar mass of an element is the mass of one mole of the element in grams. We can calculate the number of moles by dividing the mass of the sample by the molar mass of the element.

Let's assume that the element is X. The molar mass of X can be calculated by dividing the mass of the sample by the number of moles present in the sample:

molar mass of X = 13.7 g / (2.1 x 10²³ atoms / Avogadro's number)

where Avogadro's number is 6.022 x 10^23 atoms/mol.

molar mass of X = 13.7 g / 3.49 mol

molar mass of X = 3.93 g/mol

Now, we can compare the molar mass of X to the molar masses of known elements to determine the element. From the periodic table, we can see that the closest molar mass to 3.93 g/mol is that of Lithium (Li) which is 6.94 g/mol.

Therefore, the element is Lithium (Li).

To learn more about molar mass, visit:

https://brainly.com/question/21334167

#SPJ1

The mass of the air in the room is approximately 5.65 kg.

To solve the problem, we need to convert the dimensions of the room from feet to liters, then use the density of air to calculate the mass of the air in the room.

First, let's convert the dimensions of the room from feet to liters:

1 ft = 0.3048 m

1 m^3 = 1000 L

So, the volume of the room in liters is:

V = (11.5 ft) × (17.5 ft) × (9.0 ft) × (0.3048 m/ft)^3 × (1000 L/m^3)

= 4740 L

Now, we can use the density of air to calculate the mass of the air in the room:

mass = density × volume

= 1.19 g/L × 4740 L

= 5646.6 g

≈ 5.65 kg

For more question on mass click on

https://brainly.com/question/30459977

#SPJ11

The correct answer is Carrots and snow peas stir-fried in canola oil which is the perfect combination of foods that provide the best source of omega-3 fatty acids.

Alpha-linolenic acid (ALA), the most prevalent omega-3 fatty acid in the majority of Western diets, can be found in leafy green vegetables, flax seeds and flaxseed oil, vegetable oils, nuts (especially walnuts), and some animal fat, particularly from grass-fed animals.

Omega-3s are nutrients that you can obtain through food or supplements and that support the growth and upkeep of a healthy body. They are essential to the composition of each cell wall you have. They also serve as an energy source and support the functioning of your immune system, heart, lungs, and blood vessels.

To know more about fatty acids visit-

https://brainly.com/question/30829902

#SPJ1

Chlorine serves as the reaction's limiting reagent, and sodium serves as the reaction's reagent. The point of equivalency, known as endpoint of the reaction, where the mass of sodium and mass of chlorine are equal.

The white, crystalline substance sodium chloride, or ordinary table salt, which comprises sodium cations and chloride anions, is created by a powerful reaction between the elements sodium and chlorine.

Because each chemical equation must be balanced and the amount of atoms of each element on the reactant side must match the number of atoms of each other, chemical equations serve as examples of the law of conservation of mass.

To know more about limiting reagent visit:-

https://brainly.com/question/11848702

#SPJ1

Heat travels through surface currents in a process known as convection.

Convection occurs when heat is transferred through a fluid or gas, such as air or water, through the movement of the fluid or gas itself. In this process, warmer, less dense fluid or gas rises, while cooler, denser fluid or gas sinks. This creates a continuous flow or current, which transfers heat from one place to another. Therefore, we can infer that heat travels through surface currents by the transfer of energy through the movement of fluids or gases. Convection is an important process in the transfer of heat because it can occur in fluids or gases that are otherwise stationary, such as the air in a room or the water in a pot on a stove.

learn more about convection here:

https://brainly.com/question/4138428

#SPJ4

Answer:

A mixture of an element and a compound made of elements are two different types of combinations of matter.

An element is a substance that cannot be broken down into simpler substances by chemical means. Atoms are the smallest units of elements that still retain their properties. For example, gold is an element with the symbol Au, and its atoms cannot be broken down into simpler substances without losing their properties.

A compound, on the other hand, is a substance made up of two or more different elements chemically combined in a fixed ratio. For example, water is a compound made up of two hydrogen atoms and one oxygen atom, with the chemical formula H2O.

A mixture of an element and a compound is a combination of two or more substances that are physically mixed together, but not chemically combined. The substances in the mixture retain their individual properties and can be separated by physical means, such as filtering or evaporation. For example, a mixture of salt (a compound) and iron filings (an element) can be physically separated by using a magnet to attract the iron filings, leaving the salt behind.

In summary, the difference between a mixture of an element and a compound made of elements is that the former is a physical combination of two or more substances that retain their individual properties, while the latter is a chemical combination of two or more elements in a fixed ratio that results in a new substance with its own distinct properties.

Answer:

Need the reast of the question.  Like the reactants or equation

Explanation:

If the initial concentration of base b in solution is 0.18 m. if the pH of the solution at equilibrium is 13.190, the percent ionization of the base is 78.3.

Calculating the concentration of hydroxide ions (OH⁻) in the solution at equilibrium is necessary to ascertain the base's percent ionization.

It is observed that the solution is basic, so use the following relationship:

pOH + pH = 14

According to question, the pH at equilibrium is 13.190, so find the pOH:

pOH = 14 - 13.190

= 0.810

Now, change pOH to [OH⁻] concentration:

[OH⁻] = [tex]10^_(-pOH)}[/tex]

= [tex]10^{-0.810}[/tex]

= 0.141 M

The concentration of [OH⁻] at equilibrium is 0.141 M.

To find the percent ionization of the base, it is required to compare the concentration of [OH⁻] at equilibrium with the initial concentration of the base.

Percent ionization = ([OH] / [B]) × 100

Place the values, it is observed that:

Percent ionization = (0.141 M / 0.180 M) × 100

= 78.3

The base has a 78 percent ionization rate, rounded to the closest whole number.

Thus, the base has a 78 percent ionization rate, rounded to the closest whole number.

Learn more about percent ionization, here:

https://brainly.com/question/30060037

#SPJ6

Answer: I put 78 on my homework and got it wrong. The computer said it was 86%

Explanation:he percent ionization is the ratio of the hydroxide ion concentration at equilibrium to the initial concentration of the base, multiplied by 100. Based on the pH, the equilibrium concentration of hydroxide ions is

[OH−]=10−(14.000−pH)=10−0.810=0.155

Therefore, the percent ionization is

0.155 M0.18 M×100=86%