Answer:
A
Explanation:
In simple terms: Hammer goes one way, air goes the other way.
Answer:
d
Explanation:
i took the test
What is the name of this compound S2I4?
Answer:
Di Sulphur tetraiodide is the chemical compound with the formula S2I4
Explanation:
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
1 mol of oxygen has fewer molecules.
1 mol of oxygen has more molecules.
Each sample has the same number of molecules.
The molecules cannot be compared without knowing the mass.
Answer:
Each sample has the same number of molecules.
Explanation:
Just took the quiz on edge 2021
Taking into account the definition of Avogadro's number, each sample has the same number of molecules.
Avogadro's NumberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
This caseAvogadro's number applies to any substance. This means that the number of molecules in 1 mol of oxygen is equal to the number of molecules in 1 mol of nitrogen.
Finally, the correct answer is the third option: each sample has the same number of molecules.
Learn more about Avogadro's Number:
brainly.com/question/1445383
brainly.com/question/1528951
whats the unit for mass
Answer:
The unit for mass is the kilogram (Kg).
Explanation:
Hope this helped!! <3 good luckk!!
The temperature of the system is highest when it is a
A. gas
B. liquid
C. plasma
D. solid
Answer:
gas
Explanation:
its either gas or plasma but gas should be it bc liquid and solid are cold
How many moles and atoms are there in 60 grams of Calcium?
Answer:
The moles present in 60 g of calcium are 1.5 moles.
Answer:
In 60 grams there are 1,5 mols
Explanation:
3. If 12.5 grams of copper are reacted with excess chlorine gas, then 25.4 grams of
copper (II) chloride are produced. Calculate the theoretical yield and the percent
yield. Cu + Cl2 → CuCl2
Answer:
Percent yield = 99.6%
Theoretical yield = 25.5 g
Explanation:
Given data:
Mass of copper = 12.5 g
Mass of copper(II) chloride produced = 25.4 g
Theoretical yield = ?
Percent yield = ?
Solution:
Chemical equation:
Cu + Cl₂ → CuCl₂
Number of moles of copper:
Number of moles = mass/molar mass
Number of moles = 12.5 g / 63.5 g/mol
Number of moles = 0.19 mol
Now we will compare the moles of copper and copper chloride.
Cu : CuCl₂
1 : 1
0.19 : 0.19
Mass of CuCl₂: Theoretical yield
Mass = number of moles × molar mass
Mass = 0.19 mol × 134.45 g/mol
Mass = 25.5 g
Percent yield:
Percent yield = (actual yield / theoretical yield )×100
Percent yield = ( 25.4 g/ 25.5 g) ×100
Percent yield = 99.6%
How many moles are in 8.63 x 103 atoms of Li?
1.43 × 10⁻²⁰ mol Li
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
8.63 × 10³ atoms Li
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 8.63 \cdot 10^3 \ atoms \ Li(\frac{1 \ mol \ Li}{6.022 \cdot 10^{23} \ atoms \ Li})[/tex]Multiply/Divide: [tex]\displaystyle 1.43355 \cdot 10^{-20} \ moles \ Li[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
1.43355 × 10⁻²⁰ mol Li ≈ 1.43 × 10⁻²⁰ mol Li
What is the mass in grams of 0.40 moles of sodium borohydrate NaBH4
Answer:
Mass = 15.12 g
Explanation:
Given data:
Mass of sodium borohydride = ?
Number of moles of sodium borohydride =0.40 mol
Solution:
Formula:
Mass = number of moles / molar mass
Molar mass of sodium borohydride = 37.8 g/mol
By putting values,
Mass = 0.40 mol × 37.8 g/mol
Mass = 15.12 g
A heterogeneous mixture that has very small dispersed particles and stays mixed for a long time is a____. it for science class
What is the product(s) of the reaction below?
2Al(s) + Fe2O3(s) ---> Al2O3(s) + 2Fe(s)
A. Solid aluminum oxide and solid iron
B. Solid aluminum
C. Saturated aluminum oxide and saturated iron
D. Iron(III) oxide and aluminum oxide
Answer:
A. Solid aluminum oxide and solid iron
Explanation:
The reaction equation is given as:
2Al + Fe₂O₃ → Al₂O₃ + 2Fe
The species on the left hand side are the reactants
Those on the right hand side of the expression are the products.
The products are:
Al₂O₃ and Fe
These are solid aluminum oxide and solid iron
Which of the following correctly shows the relationship, in terms of number of particles, of the three substances?
A. 1 mole of water < 1 mole of helium < 1 mole of aluminum
B. 1 mole of aluminum = 1 mole of helium = 1 mole of water
C. 1 mole of aluminum < 1 mole of helium < 1 mole of water
D. 1 mole of helium < 1 mole of aluminum < 1 mole of water
The correct option which shows the relation between particles of the three substances is 1 mole of aluminum = 1 mole of helium = 1 mole of water.
What is a particle?
A particle is a small part of matter.
The term refers to particles of all sizes, ranging from subatomic particles like electrons to visible particles like dust particles floating in sunlight.
The relationship of a number of particles of the substance can be calculated by Avogadro's law
Thus, the correct option is B. 1 mole of aluminum = 1 mole of helium = 1 mole of water
Learn more about particles
https://brainly.com/question/1685421
Consider the following reaction:
10 KCIO3 + 3 P4 → 3 P4010 + 10 KCI
Given 30 moles of P4 and 86 moles of KCIO3, which would act as the limiting reactant?
Answer: [tex]KClO_3[/tex] is the limiting reactant in the given reaction.
Explanation:
Limiting reagent is defined as the chemical specie which gets totally consumed in the reaction and the formation of product is dependent on this reagent.
We are given:
Moles of [tex]P_4[/tex] = 30 moles
Moles of [tex]KClO_3[/tex] = 86 moles
The given chemical equation follows:
[tex]10KCIO_3+3P_4\rightarrow 3P_4O_{10}+10KCI[/tex]
By Stoichiometry of the reaction:
If 10 moles of [tex]KClO_3[/tex] reacts with 3 moles of [tex]P_4[/tex]
Then, 86 moles of [tex]KClO_3[/tex] will react with = [tex]\frac{3}{10}\times 86=25.8moles[/tex] of [tex]P_4[/tex]
As, given amount of [tex]P_4[/tex] is more than the required amount. So, it is considered as an excess reagent.
Therefore, [tex]KClO_3[/tex] is considered as a limiting reactant because it limits the formation of product.
what is one example of a electromagnetic wave
Answer:
Examples of EM waves are radio waves, microwaves, infrared waves, X-rays, gamma rays, etc.
Answer:
Electromagnetic waves can be split into a range of frequencies. This is known as the electromagnetic spectrum. Examples of EM waves are radio waves, microwaves, infrared waves, X-rays, gamma rays, etc.
Explanation:
A 1.0 kg ball is thrown into the air and initial velocity of 30 mi./s how high into the air did the ball travel
Answer:
45.9m
Explanation:
Given parameters:
Mass of the ball = 1kg
Initial velocity = 30m/s
Unknown:
Height the ball will travel = ?
Solution:
At the maximum height, the final velocity of the ball will be 0;
Using ;
V² = U² - 2gh
V is the final velocity
U is the initial velocity
g is the acceleration due to gravity
h is the height
0² = 30² - (2 x 9.8 x h)
0 = 900 - 19.6h
h = 45.9m
The following diagram shows the bonds that make up potassium acetate.
Answer:
6
Explanation:
ye
Radiation can travel through A. liquids B. gases C. empty space D. all of these
Answer:
Liquids
Explanation:because animals like dolphins use sound radiation under water to hear each other
Answer:
D. all of these.
Explanation:
it can travel through solids, liquids, and gasses.
If the object floats in water, is its density lower or higher?
Answer:
Its has a lower density. Think about it, a ship in the water is long because if it wasn't it would have a higher density and sink. The ship needs to diperse its weight across the water to make it less dense.
Explanation:
Your welcome! Have a great day!
To be effective, a certain drug must not drop below 15 mg in the body. A 120
mgs of that drug was administered to a patient. How much time will it take for that drug to reach the 15 mg minimum level. The drug's half-life is 30 minutes.(show how you arrived at your response)
Answer:
90 Minutes
Explanation:
Original concentration = 120 mg
Half life = 30 minutes
Minimum level = 15 mg
Basically, we are to calculate the time it would take to drop from 120 mg to 15 mg.
The half life of a substance is the time it takes for the original concentration of a substance to drop to half it's starting concentration.
First Half life:
Starting concentration = 120mg
Concentration after half life = 120 / 2 = 60 mg
Second Half life;
Starting concentration = 60 mg
Concentration after half life = 60 / 2 = 30 mg
Third Half life;
Starting concentration = 30 mg
Concentration after half life = 30 / 2 = 15 mg
We have reached the minimum 15 mg level. This means it took three half lives to get there.
Total time taken = No of Half lives * Half life duration = 3 * 30 mins = 90 Minutes
When a substance has large or strongly-attracted particles, they do not flow freely. For example, water flows very quickly compared to honey. Which property of liquids does this example illustrate?
Answer:
Viscosity
Explanation:
Viscosity is how thick a liquid is due to internal friction.
ILL GIVE YOU BRAIN LIEST IF YOU KNOW THE ANSWERS
Answer:B & C
tell me if im wrong
Answer:
Q 3 c it will reduce rate of photosynthesis in plants that live in the bottom of the lake
Q4 d the atom are in same group
This is right answer because these two elements are Lithium and neon Lithium is present in first group and Neon in last or group 18
Explanation:
The picture below shows the positions of the Earth, Moon, and Sun during an eclipse.
What is true of the eclipse shown in the picture?
A.
It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
B.
It is a solar eclipse, in which the Earth casts a shadow on the Moon.
C.
It is a lunar eclipse, in which the Moon casts a shadow on the Earth.
D.
It is a solar eclipse, in which the Moon casts a shadow on the Earth.
Answer:
it is option c liner eclipse
Answer:
A-It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
Cynthia has 200kg of magnesium. Calculate how much MgCl2 she can make.
Mg + Cl2 = MgCl2
Answer:
784.4kg
Explanation:
Given parameters:
Mass of Mg = 200kg
Unknown:
Mass of MgCl₂ = ?
Solution:
The reaction equation is given as:
Mg + Cl₂ → MgCl₂
Find the number of moles of the given specie;
Number of moles of Mg = [tex]\frac{mass}{molar mass}[/tex] = [tex]\frac{200000}{24.3}[/tex] = 8230.5mole
So;
1 mole of Mg will produce 1 mole of MgCl₂
8230.5mole of Mg will produce 8230.5mole of MgCl₂
Mass of MgCl₂ = number of moles x molar mass
Molar mass of MgCl₂ = 24.3 + 2(35.5) = 95.3g/mol
Mass of MgCl₂ = 8230.5mole x 95.3g/mol = 784.4kg
what is the mass in grams of a sample of 7.3 x 10^23 molecules of (iodine heptafluoride) IF7
320 g IF₇
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:Step 1: Define
7.3 × 10²³ molecules IF₇
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of I - 126.90 g/mol
Molar Mass of F - 19.00 g/mol
Molar Mass of IF₇ - 126.90 + 7(19.00) = 259.9 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 7.3 \cdot 10^{23} \ molecules \ IF_7(\frac{1 \ mol \ IF_7}{6.022 \cdot 10^{23} \ molecules \ IF_7})(\frac{259.9 \ g \ IF_7}{1 \ mol \ IF_7})[/tex]Multiply/Divide: [tex]\displaystyle 315.056 \ g \ IF_7[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
315.056 g IF₇ ≈ 320 g IF₇
What do the red arrows represent
Answer:
There are three forces acting on the skateboard. One of these forces is the weight of the rider. Another is the force of gravity on the board itself. The third is the force of the ground pushing up on the skateboard.
Enter a complete ionic equation to show the reaction of aqueous Hg2(NO3)2 with aqueous sodium chloride to form solid Hg2Cl2 and aqueous sodium nitrate. Express your answer as a complete ionic equation. Identify all of the phases in your answer.
Answer: [tex]Hg_2^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+2Cl^-(aq)\rightarrow Hg_2Cl_2(s)+2Na^+(aq)+2NO_3^-(aq)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]Hg_2(NO_3)_2(aq)+2NaCl(aq)\rightarrow Hg_2Cl_2(s)+2NaNO_3(aq)[/tex]
The complete ionic equation will be :
[tex]Hg_2^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+2Cl^-(aq)\rightarrow Hg_2Cl_2(s)+2Na^+(aq)+2NO_3^-(aq)[/tex]
i need help asap!! i will give brainliest
Are the activities exothermic or endothermic?
Answer:
The first 5 are exothermic reaction because heat is in product means heat is evolved or given out.
And last no reaction shows that heat is required so last reaction is endothermic reaction.
Explanation:
And heat is evolved in exothermic reaction and heat is absorbed in endo thermic reaction
Please help outttt:(
Explanation:
1)
2Fe+3Cl2 →2FeCl3
2)
CH4+2O2 → CO2 +2H2O
3)
SnO2+2H2 →2H2O +Sn
4)
2KOH + H2SO4 → K2SO4+2H2O
Which element has the following complete electron configuration : 1s22s22p63s23p64s23d5?
Answer:
Manganese
Explanation:
The electronic configuration of the atom is:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁵
The powers in this configuration is the number of electrons in each orbital:
2 + 2 + 6 + 2 + 6 + 2 + 5 = 25
The compound has 25 electrons and it is Manganese
The electron configuration 1s22s22p63s23p64s23d5 corresponds to the element manganese (Mn).
In the electron configuration provided:
1s2 represents the filling of the 1s subshell with two electrons.
2s2 represents the filling of the 2s subshell with two electrons.
2p6 represents the filling of the 2p subshell with six electrons.
3s2 represents the filling of the 3s subshell with two electrons.
3p6 represents the filling of the 3p subshell with six electrons.
4s2 represents the filling of the 4s subshell with two electrons.
3d5 represents the filling of the 3d subshell with five electrons.
Based on this electron configuration, we can correctly identify the element as manganese (Mn), which has an atomic number of 25.
Know more about electron configuration:
https://brainly.com/question/29157546
#SPJ6
2. Convert 120.02g of FrBiz to moles
a. 0.19 moles
b. 5.34 moles
c. 76,932.82 moles
Answer:
PRACTICE MULTIPLE CHOICE QUESTIONS FROM UNIT 10
1.) A cylinder is filled with 2.00 moles of nitrogen, 3.00 moles of argon, and 5.00 moles of helium. If
the gas mixture is at STP, what is the partial pressure of the argon?
(A) 152 torr (B) 228 torr (C) 380. torr (D) 760. torr
2.) Compared to the average kinetic energy of 1 mole of water at 0 oC, the average kinetic energy
of 1 mole of water at 298 K is
(A) the same, and the number of molecules is the same
(B) the same, but the number of molecules is greater
(C) greater, and the number of molecules is greater
(D) greater, but the number of molecules is the same
3.) If the pressure on a given mass of gas in a closed system is increased and the temperature
remains constant, the volume of the gas will
(A) decrease (B) increase (C) remain the same
4.) Which gas has approximately the same density as C2H6 at STP?
(A) NO (B) NH3 (C) H2S (D) SO2
5.) At a temperature of 273 K, a 400. milliliter gas sample has a pressure of 760. millimeters of
mercury. If the pressure is changed to 380. millimeters of mercury, at which temperature will
this gas sample have a volume of 551 milliliters?
(A) 100 K (B) 188 K (C) 273 K (D) 546 K
Get the answers to these questions
Back to the Unit 10 Old Tests Pag