The statement is false, that the greatest magnification on the compound light microscope can be achieved by the use of the high-power objective lens.
What is a Compound Light microscope?A microscope with numerous lenses and its own light source is referred to as a compound light microscope. In this type of microscope, the rotating nosepiece is positioned closer to the specimen and contains the objective lenses, while the binocular eyepieces house the ocular lenses.
The compound binocular microscope is now more often utilized, even though it can occasionally be found as monocular with only one ocular lens.
Zacharias Jansen's 1595 invention of the compound microscope with collapsible tubes and a 9X magnification produced the first light microscope.
Since then, microscopes have advanced significantly; the strongest compound microscopes available today have magnifications of 1,000 to 2,000X.
Hence, the statement is false that it can be achieved by using the high power objective lens.
To get more information about Compound Light Microscope :
https://brainly.com/question/13174279
#SPJ4
One of the pieces of evidence supporting energy quantization was the line spectra of elements. Why does this demonstrate energy quantization?.
The line spectra supports the quantization of energy, because there are sharp emission lines demonstrating discrete energy levels.
What is emission of radiation by elements?When an element emits energy in the form of radiation, it produces a spectrum of colors on a photographic plate.
This spectrum can either be continuous or discrete.
In continuous spectrum the spectrum continues without any discrimination between two regions.
Also, the line spectrum consists of discrete and sharp lines, which shows the emission of radiation in a certain amount in a certain time, with a break between emission.
Thus, the line spectra supports the quantization of energy, because there are sharp emission lines demonstrating discrete energy levels.
Learn more about energy quantization here: https://brainly.com/question/14327721
#SPJ1
What is tmaxtmaxt_max, the longest time after the dragster begins to accelerate that you can possibly run into the back of the dragster if you continue at your initial velocity?
The correct answer is t_max=V_0/a.
Here, we must apply the motion equation v=u+at to both the first and second conditions. Next, determine the entire time that can be determined using the law of motion. The next thing is our velocity.
Dynamic and kinematic motion descriptions are the two different categories. Dynamics covers a wide range of phenomena since it takes into account the momenta, forces, and energy of the particles.
Let the time be t_max when you collide with the dragster,
speed of dragster at time t_max is at_max .
If at_max = v_0(speed of years) i.e., both have the same speed you will collide with dragster.
t_max = (v-u)/a
=(v_0 - 0)/a
=v_0/a
Hence t_max=V_0/a.
To learn more about velocity refer the link:
https://brainly.com/question/12910124
#SPJ4
What is nature's heat tax, and how does it relate to energy use? drag the terms on the left to the appropriate blanks on the right to complete the sentences.
As per second law of thermodynamics, The amount of energy that must be lost to the environment for the process to take place is known as nature's heat tax.
What is second law of thermodynamics?
The second law of thermodynamics is a physical principle founded on the knowledge of how heat and energy are transformed throughout the world. Explanation of the law is that, without energy input to change the direction of heat flow, heat always goes "downhill," or from hotter to colder objects. The phrase "not all heat energy can be turned into work in a cyclic process" is another definition.
Every energy exchange is subject to the inevitable energy reduction known as "nature's heat tax." The majority of energy transactions lose some energy to the environment, making each transaction only marginally efficient. As a result, the energy is used most effectively when there are fewest number of transactions.
To know more about second law of thermodynamics, go to URL
https://brainly.com/question/24250403
#SPJ4
How many signals do you expect in the broadband-decoupled 13c nmr spectrum of dibp?
There are 6 expected signals in the broadband-decoupled 13c nmr spectrum of dibp.
The resonances due to 13C nuclei are split by neighbouring H atoms. These splitting would complicate the appearance of the spectra making them harder to interpret. Therefore, in a "normal" 13C spectra, these couplings are "removed" by applying a continuous second radio frequency signal of a broad frequency range that excites all the H nuclei and cancels out the coupling patterns due to the interaction of the H with the 13C. This means that each C is seen as a single line. Of course information is being lost by doing this, such as how many H are attached to each C.
In off-resonance decoupling the one bond C-H couplings are retained so the signal for a particular C is given by the number of attached H in accord with n+1 rule. So, for example, a -CH3 shows as a quartet and a -CH2- as a triplet.
13C chemical shifts
The most significant factors affecting the chemical shifts are:
Electronegativity of the groups attached to the C
Hybridization of C
To know more about "Electronegativity"
Refer this link:
https://brainly.com/question/12903482
#SPJ4
The bending of light as it moves from one medium to another with differing indices of refraction is due to a change in what property of the light? group of answer choices
Refraction is the result of a wave's direction changing as it travels from one medium to another due to a change in speed. When light travels through a fast medium and into a slow medium, the light beam is refracted, which causes it to bend in the direction of the boundary between the two media.
What is Refraction ?When light travels through a fast medium and into a slow medium, the light beam is refracted, which causes it to bend in the direction of the boundary between the two media.
The term "refraction" refers to the way light bends as it travels through transparent materials (it also occurs with sound, water, and other waves). Because of this bending brought on by refraction, we are able to make lenses, magnifying glasses, prisms, and rainbows.
Refraction occurs when light enters a medium from another and experiences a change in speed. Light bends toward the normal when it transitions from air to water due to the decrease in speed.
To learn more about Refraction from the given link:
brainly.com/question/14760207
#SPJ4
A reaction occurs in which carbon combines with oxygen to form carbon dioxide is this a chemical reaction or nuclear reaction
The part of river's current moves at a 1.486 m/s speed.
the distance between two points, objects, lines, etc. Remoteness is the quality of being physically separated from another thing or person. a line drawn in the universe. To walk seven miles in one hour would be too time-consuming.
The difference between the change in distance and the change in time is used to compute the rate of change.
Rate: times the distance Time
The distance is 16.5 miles, and the time is 5.5 hours.
If we enter this into the formula above, it yields:
16.5 - 5.5 / 10.9 - 3.5 = 11/7.4 = 1.486 m/s is the rate of change.
Calculations show that the constant rate of change is 1.486 m/s.
Learn more about combustion here-
https://brainly.com/question/15117038
#SPJ4
Tyler wants to learn about the types of insects in the soil near his house. Which would be a benefit of carrying out a descriptive investigation?
He could collect a large amount of data for a low cost.
He could control most of the variables affecting the insects.
He would get results that might change after the investigation.
He would be able to study cause-and-effect relationships.
Tyler wants to learn about the types of insects in the soil near his house. He could collect a large amount of data for a low cost.
Types of investigation :Descriptive investigation, comparative investigation, and experimental investigation are the three types of investigations that scientists use to research and create explanations for events in nature.
What is the benefit of carrying out a descriptive investigation?Providing descriptions is the aim of descriptive research. It should describe phenomena in a factual, precise, and organized manner without attempting to infer their causes. It does not provide an explanation for the how, when, or reasons why a specific phenomenon occurred.
Methods of investigation :In various situations, scientists employ a variety of investigational techniques. These techniques include fair testing, identifying and classifying, modeling, pattern seeking, and researching (in no particular order). According to research, fair testing dominates science instruction.
To know more about comparative investigation :
https://brainly.com/question/12042816
#SPJ9
Sara places a cold bottle of water in the sun. after several minutes, she notices that water droplets are collecting on the outside of the bottle. which change of state does this illustrate?
that water droplets are collecting on the outside of the bottle is due to Melting processes processes
There isn't a single temperature that can be regarded as the melting point of water because the melting point partly depends on pressure. However, for practical purposes, 0 °C, or 32 °F or 273.15 K, is quite close to being the melting point of pure water ice at 1 atmosphere of pressure
ce, water, and gas are all different states of the element water (vapour or gas). Ice, a solid, may melt into water when heated (a liquid). Ice forms when heat is removed from a liquid of water (a solid). We refer to the transformation of water into a solid or gas as a shift in its state of matter.
to learn more about temperature and melting process:
https://brainly.com/question/11464844
#SPJ4
In an rlc series circuit, the voltage amplitude and frequency of the source are 100 v and 500 hz, respectively, and , l = 0.20 h, and . (a) what is the impedance of the circuit?
The impedance of the series RLC circuit which have the voltage amplitude and frequency of the source as 100 v and 500 hz, respectively, and l = 0.20 h is 686 ohms.
What is impedance?
The opposition to alternating current presented by the combined effect of resistance and reactance in a circuit is called impedance.
Given,
Voltage (V₀) = 100 v
Frequency (f) = 500 Hz
Inductance (L) = 0.20 h
Angular frequency,
ω = 2πf = 2π(500) = 1000π rad.
Since there is no capacitor and resistance present in the circuit, the impedance will solely depends on the inductance.
Inductive reactance,
[tex]X_L = (w)(L) = (1000)(3.4)(0.20) = 628 ohms[/tex]
By equation,
[tex]Z = \sqrt{R^2 + (X_L - X_C)^{2} }[/tex]
[tex]Z = \sqrt{0 + (628 + 0) ^{2} }[/tex]
Z = 628 ohms.
Hence, the impedance of the circuit is 628 ohm.
To know more about impedance, go to URL
https://brainly.com/question/13134405
#SPJ4
A light microscope with an objective lens numerical aperture of 0.65 is capable of allowing two objects 320 nm apart to be distinguished when using light with a wavelength of 420 nm.
a. true
b. false
It is false to conclude that a light microscope with an objective lens numerical aperture of 0.65 is capable of allowing two objects 320 nm apart to be distinguished when using light with a wavelength of 420 nm.
Given,
Numerical aperture of lens = 0.65
Wavelength (λ) = 420 nm
Now,
0.61 × λ / numerical aperture = resolving power
Or, 0.61 × 420 / 0.65 =394.15 nanometers
Therefore, the least distance between two things that can be distinguished as two independent objects is 394.15 nm, which means two objects separated by 320 nm can not be distinguished as two separate objects with this microscope.
Hence, as a result, the statement is false.
To learn more about the lens, aperture, and wavelength, visit: https://brainly.com/question/13092109
#SPJ4
What is efficiency of petrol engine of a train
At highway speeds, anautomobileis capable of an acceleration of about 1.6m/s2. at this rate, how long does it take to accelerate from 80km/hto 110km/h?
At highway speeds, an automobile is capable of an acceleration of about 1.6m/s2. at this rate, it take to accelerate from 80km/h to 110km/h is 5.2084s.
What is velocity?Velocity is the directional speed of a object in motion as an indication of its rate of change in the position as observed from a particular frame of reference and as measured by a particular standard of the time (e.g. 60 km/h northbound). Velocity is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of the bodies.
Velocity is a physical vector quantity; both the magnitude and direction are needed to define it. The scalar absolute value (magnitude) of velocity is called the speed, being a coherent derived unit whose quantity is measured in the SI (metric system) as meters per second (m/s or m⋅s−1). If there is a change in the speed, direction or both, then the object is said to be undergoing an acceleration
Therefore,
v = v0 + at, where v is the final velocity, v0 is initial velocity, a is acceleration and t is time, solve for t:
t = (v - v0) / a,
note that all the variables must be in the same units, we want m/s which is a:
110 km / hour = (110 * 1000) / (60 * 60) = 30.5556 m/s:
80 km / hour = (80 * 1000) / (60 * 60) = 22.2222 m/s:
t = (30.5556 - 22.2222) / 1.6 = 5.2084 s
To know more about velocity visit: https://brainly.com/question/18084516
#SPJ4
On holiday a family travels from meyerville 10 miles away to sprytown 70 miles away in 3 hours. Find their speed
On holiday a family travels from meyerville 10 miles away to sprytown 70 miles away in 3 hours, their speed is 20 miles per hour.
Equation :To find speed using formula,
s = d / t
s = 70 - 10 / 3
s = 60 / 3
s = 20 miles / hours
Speed :Speed is defined as the rate of change of position; what we mean by speed is the magnitude with which an object moves, or, more scientifically, the rate at which an object changes its position is per unit time.
Speed is calculated as speed = distance / time. To figure out what the units for speed are, you must first understand the units for distance and time. Because distance is measured in metres (m) and time is measured in seconds (s), the units will be metres per second (m/s).
To know more about units :
https://brainly.com/question/23843246
#SPJ9
What is the instantaneous velocity of the sloth at time t = 8s?
The calculated value is AO=3.2sec.
The limit of average velocity as elapsed time approaches zero, or the derivative of x with respect to t: v (t) = d d t x (t), is the instantaneous velocity of an object. v (t) equals d d t x (t). Instantaneous velocity is a vector having a dimension of length per time, similar to average velocity.
In contrast to instantaneous velocity, which is determined by the slope of the tangent line, average velocity is defined as the change in position (or displacement) during the course of transit.
So, we obtain
cosθ= 5/4
= 4AO
So, we obtain AO=3.2sec.
The complete question is- Position-time graph is shown, which is a semicircle from t=2 to t=8 sec. Find time t at which the instantaneous velocity, is equal to average velocity over first t seconds.
Learn more about instantaneous velocity here-
https://brainly.com/question/13190516
#SPJ9
the magnitude of the unit is the same between the and scales. they differ in the position of the zero point.
The magnitude of the unit is the same between the interval and ratio scales. The location of the zero point varies amongst them.
What are interval and ratio scales?Both interval scales and ratio scales are made up of tangible, uniformly sized units like millimetres or seconds. The difference between three and four seconds, for example, is the same as the difference between four and five seconds since seconds are all the same size.
The distinction between interval and ratio scales is that the former has significant zero points while the latter does not.
How is the interval scale different from the ratio scale?The data gathered can be added, subtracted, and multiplied on an interval scale. The scale makes it possible to calculate the degree of the difference but not the ratio. A ratio scale allows for division in addition to addition, subtraction, and multiplication. In other words, you can figure out how the values compare.
To know more about interval scales and ratio scales, visit: https://brainly.com/question/13770371
#SPJ4
an aircraft is flying not worth at 300 km per hour yesterday wind is blowing West was at 80 km per hour what is the actual Direction the aircraft travels over the ground
Answer:
220km
Explanation:
how does it take bee to travel 90 miles of she travels a constant speed of 60 mph in her car?
a, 2 hours and 15 minutes
b, 1 hour and 30 minute
c, 1/2 an hour
d, 30 minutes
e, 45 minutes
help pls
Answer:
b
Explanation:
90 miles
60 mph (miles per hour)
1 hour = 60 minutes = 60 miles
90 miles - 60 miles = 30 miles
30 miles = 30 minutes
1 hour and 30 minutes
Carbon atoms have an atomic radius of 70 picometers, or 7.0 x 10 meters (1 m = 10 pm). if exactly 1 mole of carbon atoms were lined up in a row, about how long would the line of atoms be?
By Avogadro's number, the carbon atoms length is 8.428 x 10¹³ m.
We need to know about Avogadro's number to solve this problem. Avogadro's number is the number that explains how many carbon atoms are in one mol. The Avogadro's number is
Na = 6,02 × 10²³ atoms / mol
From the question above, we know that
n = 1 mol
r = 70 pm = 70 x 10¯¹² m
By using Avogadro's number, we can calculate how many carbon atoms
N = Na . n
N = 6,02 × 10²³ x 1
N = 6,02 × 10²³ atoms
As we know one atom's length is equal to its diameter, Hence
atom length = d
atom length = 2 x r
atom length = 2 x 70 x 10¯¹²
atom length = 140 x 10¯¹² m
Calculate the length of 1 mol Carbon atoms length
length = N x atom length
length = 6,02 × 10²³ x 140 x 10¯¹²
length = 8.428 x 10¹³ m
For more on Avogadro's number at: https://brainly.com/question/1581342
#SPJ4
At your annual physical exam the nurse takes your blood pressure and records it as 130/110. why is the diastolic pressure a concern but systolic is not?
Heart attacks, heart failure, kidney disease, and overall mortality are all associated with systolic blood pressure. Aortic disease risk is increased by a high diastolic reading.
What is systolic blood pressure?Two figures are used to calculate blood pressure: the first, systolic blood pressure, represents the force exerted on your arteries as your heart beats.
The second number, or diastolic blood pressure, measures the pressure in your arteries between heartbeats.
Systolic blood pressure, the highest reading, gauges the force the heart applies to the artery walls with each beat. The bottom reading, or diastolic blood pressure, gauges the pressure the heart places on the artery walls between beats.
To learn more about systolic blood pressure from the given link:
brainly.com/question/14507800
#SPJ4
What is the width of the 90 confidence interval for true population proportion if there are 12 successes in a sample of 25?
width of the 90 confidence interval for true population proportion if there are 12 successes in a sample of 25 is around 0.164
We use the following formula to determine the value of the approximate breadth or margin of error:
width is about equal to z [p (1 - p) / n]
^0.5
Consequently, at a 90% confidence level, the z score can be calculated using normal distribution tables. P = likelihood of success and N = 25 samples. According to the standard distribution tables, z = 1.645 is the value of z at the 90% level. There is a 12 out of 25 chance of success, therefore
p = 12 / 25 = 0.48 As a result, the width is approximately:
width is roughly equal to 1.645 [0.48 (1 - 0.48) / 25]
^0.5
width is around 1.645. (0.0999)
width is around 0.164.
To learn more about width:
https://brainly.com/question/4604169
#SPj4
The end of the film includes interviews with several “elite” athletes. List at least 3 of the benefits of a vegan diet that these elite athletes say they’ve experienced.
Veganism is the practice of avoiding using animal products, especially in your diet, and an ideology that supports this practice that rejects treating animals as a commodity.
The end of the film includes interviews with several “elite” athletes. List at least 3 of the benefits of a vegan diet that these elite athletes say they’ve experienced.
A vegan is someone who adheres to the ideology or diet. Numerous health advantages of a vegan diet exist.
A vegan diet can be beneficial for those trying to lose weight. Consuming vegan food may also keep your heart healthy. Additionally, this diet might provide some defense against type 2 diabetes and some malignancies.
Vegan diets typically contain higher levels of fiber, antioxidants, and healthy plant chemicals. Additionally, they seem to contain higher amounts of potassium, magnesium, folate, and vitamins A, C, and E.
Since plant-based meals are bursting with phytochemicals, especially the potent antioxidants found in fruits and vegetables, eating vegan can help lower our risk for disease. Researchers discovered that compared to non-vegans, vegans had higher amounts of saturated fatty acids, a higher proportion of total omega-3 fatty acids, and antioxidant carotenoids, all of which are associated with better health.
To know more about Vegan Diets, click on the link below:
https://brainly.com/question/11799693
#SPJ9
timing of excessive ultraviolet radiation and melanoma: epidemiology does not support the existence of a critical period of high susceptibility to solar ultraviolet radiation-induced melanoma
The existence of a 'critical period' early in a life characterized by high susceptibility to melanoma initiation due to excessive ultraviolet (UV) radiation has been suggested by various authors based on epidemiological findings from migration studies and some case-control studies.
Objective To compare the increase in melanoma risk due to excessive UV radiation between different periods in life.
We found a very similar upward gradient of melanoma risk in exposure categories related to the frequency of sunburns during both periods in life. More than five sunburns doubled the melanoma risk, irrespective of their timing in life.
The hazardous impact of sunburns seems to persist lifelong and thus activities concerned with melanoma prevention should be directed to the entire population rather than being focused only on younger age groups.
For more information on melanoma click on the link below:
https://brainly.com/question/25033946
#SPJ4
a ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m. after what time interval does it strike the gro
A ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m is 2.59s
What is speed?Speed is the time rate at which an object is moving along the path, while the velocity is the rate and direction of an object’s movement. Put the another way, speed is a scalar value, while the velocity is a vector.
The mathematical calculation for the speed is relatively straightforward, wherein the average speed of an object is calculated by dividing the distance traveled by the time it took the object to travel the distance. Velocity, on other hand, is more complicated mathematically and can be calculated in different ways, depending on what information is available about the object’s motion. In its simplest form, the average velocity is calculated by dividing change in position (Δr) by change in time (Δt)
a ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m. The equation for the height of the ball as a function of time is
y f =y i +v i -1/2g[tex]t^{2}[/tex]
0=29.6+(-8.35)-4.90[tex]t^{2}[/tex]
Solving for t,
t=[tex](+8.35± \sqrt{(-8.35)^{2}-4(-4.90(29.6)}) /2(-4.90)= (+8.35± \sqrt{69.72-580.16})/(-2.9)[/tex]
t=2.59s
To know more about velocity visit: https://brainly.com/question/18084516
#SPJ4
Point a is located 0.197 m away from a charge of - 3.52 x 10-9 c. point b is located 0.506 m away from the charge. what is the electric potential difference vb - va between these two points?
The correct answer is -98.2V.
The gravitational potential energy and the electrostatic potential energy are practically identical. In relation to the gravitational potential energy notion, we explore the electric potential energy formula. An electric charge will store the external work done on it in the form of electric potential energy or electrostatic potential energy when it is exposed to an external electric field. As a result, the external work performed by an agent in getting a charge or system of charges from infinity to the desired location without accelerating the charge is defined as the electric potential energy.
The electric potential at A due to the charge
V_A= 1/4πε_0 Q/r_A = - 9×10^9× - 3.52 x 10-9 /0.197=-160.8V
Electric potential at B due to the charge
V_B=1/4πε_0 Q/r_B= - 9×10^9× - 3.52 x 10-9 /0.506=-62.6V
V_B-V_A=-160.8-(-62.6)
=-98.2V
To learn more about electric potential refer the link:
https://brainly.com/question/16171167
#SPJ4
how many millicoulombs (mc) of charge is stored in a 152 µf capacitor when 150 v is applied to it? 1μf
The charge stored in capacitor is 22.8 mC.
We need to know about capacitors to solve this problem. Capacitor is a device that stores electric charge. The charge stored in capacitor can be determined as
Q = C . V
where Q is charge, C is capacitance and V is voltage.
From the question above, we know that
C = 152 µF = 152 x 10¯⁶ F
V = 150 V
By substituting the following parameters, we can calculate the charge
Q = C . V
Q = 152 x 10¯⁶ . 150
Q = 0.0228 C
Convert to millicoulombs
Q = 0.0228 C
Q = 0.0228 x 10³ mC
Q = 22.8 mC
Hence, the charge stored in capacitor is 22.8 mC.
For more on capacitor at: https://brainly.com/question/14883923
#SPJ4
Can an object have zero velocity and nonzero acceleration at the same time give examples.
Yes, an object can have zero velocity and non-zero acceleration at the same time.
Let's take an example of a tennis ball. If we throw the tennis ball vertically upward, the ball will have zero velocity at the highest point. At that point, the gravity is still acting downwards on the tennis ball. At this point, the ball has zero velocity and accelerates downward with gravitational acceleration = 9.8m/s.
Another example is oscillatory motion. In oscillatory motion, the acceleration is always opposite to the velocity. When the velocity becomes zero at the extreme position the body has non-zero acceleration.
If you need to learn more about object having zero acceleration but non-zero velocity, click here
https://brainly.com/question/1593948?referrer=searchResults
#SPJ4
occam's razor states that choose one: a. if two hypotheses fit the facts equally well, choose the one with fewer assumptions. b. the laws of nature are the same everywhere in the universe. c. the universe is expanding in all directions. d. patterns in nature are really manifestations of random occurrences.
Option a: if two hypotheses fit the facts equally well, choose the one with fewer assumptions.
Occam's razor states that principle of problem solving is that entities should not multiply more than necessary
Occam's Razor is the process of gathering information to make the search for the truth easier. In science, it gets rid of all assumptions that have no bearing on the predictions of the hypothesis. If you have several hypotheses that could explain an observation, it is usually best to start with the simplest one.
Occam's Razor is often at the root of a paradigm shift, where an established theory is replaced by a simpler alternative that also fits the data. For example, Ptolemy's epicycles were replaced by a simpler theory that explained the data without multiplying the elements.
Therefore Option (a) is correct.
To know more about Occam's razor,
https://brainly.com/question/14611739
#SPJ4
a team of engineers is asked to help a community improve local air quality what must the team do before it can begin to identify possible solutions
The team must first take action before looking for potential answers. Improve the solution by iterating.
Why do you mention Teams?A team is described as a collection of individuals who collaborate to complete interdependent activities in support of a common goal or mission. A good team can be created by having open communication, patience, respect for one another, and shared, compatible goals.
How do you build a team?From the start, establish expectations.Respect your team members as individuals. Engender connections within the team. Develop your emotional intelligence.Encourage others with optimism.Be in constant communication.Find ways to honor good effort.Diversify.To know more about Team visit:
https://brainly.com/question/17860885
#SPJ9
Perform the following multiplication and write the product in trigonometric form. write the magnitude in exact form. write the argument in radians and round it to two decimal places if necessary.
The magnitude of →PQ is represented symbolically as | →PQ |. The Distance Formula can be used to determine a vector's magnitude if its start and end points' coordinates are known.
What is magnitude ?The magnitude or size of a mathematical item defines whether it is larger or smaller than other objects of the same kind in mathematics. Formally speaking, the size of an object is the outcome of the class of objects it belongs to being ordered (or ranked) and shown.
Magnitude in physics can be interpreted as either a quantity or a distance.
To learn more about magnitude from the given link:
brainly.com/question/15681399
#SPJ4
A calorimeter for which mc = 25 J K−1 contains
140 g of a liquid. An immersion heater is used to
provide energy at a rate of 40 W for a total time of
4.0 min. The temperature of the liquid increases by
15.8 °C. Calculate the specific heat capacity of the
liquid. State an assumption made in reaching this
result.
The liquid's specific heat capacity is 4.2 kJ kg⁻¹ K⁻¹.
In a calorimeter, mc = 25 J K⁻¹.
The calorimeter contains m(l) = 140 g = 140 × 10⁻³ kg of liquid.
The energy is provided at a rate of Q = 40 W for a time of 4 minutes.
The liquid's temperature increases by ΔT = 15.8° C = 15.8° K.
Q = mcΔT
The equation tells you how much heat is given (Q or E), how much of that heat changes the material's temperature T, and how much of that heat is applied to a mass-m material with a specific heat capacity (c).
Now, the heat supplied will be:
Q = mcΔT + m(liquid) c(liquid)ΔT
Q = mcΔT + m(l) c(l)ΔT
c(l) = ( Q - mcΔT ) / m(l)ΔT
Now, the heat supplied is Q = 40 W = 40 J/s = 40 × 4 × 60s = 9600 J
c(l) = { ( 9600 - 25 × 15.8 ) / [ (140 × 10⁻³) × 15.8 ] }
c(l) = ( 9600 - 395 ) / [ 2212 × 10⁻³ ]
c(l) = 9205 / 2212 × 10⁻³
c(l) = 4.1614 × 10³ = 4.2 kJ kg⁻¹ K⁻¹
The specific heat capacity of the liquid is 4.2 kJ kg⁻¹ K⁻¹.
Learn more about specific heat capacity here:
https://brainly.com/question/27991746
#SPJ9