Answer:
Standard Error is increased.
Step-by-step explanation:
Type 2 error is failure to reject a false null hypothesis. This is a 'false negative' result of hypothesis testing, represented by beta 'β'.
Power of test is 1 - β, which shows probability of accurately stating a null hypothesis false, when it is actually false.
Increased sample size increases the power of test accuracy, hence reduces type 2 error. Increased level of significance implies higher probability of rejecting a true null hypothesis, ie type 1 (false positive) error. So, it decreases type 2 error.
Standard Error increase implies lower level of t statistic , ie = (x - u) / (s / √ n) Lower the t value, higher is the probability of not rejecting null hypothesis, which implies higher chance of type 2 error.
Type II error is 1 - power of the test. The factor that can alone make the type II error to increase is: Option C: The standard error is increased.
Firstly the whole story starts from hypotheses. The null hypothesis is tried to reject and we try to accept the alternate hypothesis.
The type 1 error occurs if we get false positive conclusion (false positive means we accuse null hypothesis being wrong when it was actually correct).The type 2 error occurs if we get false negative conclusion (false negative means we accept null hypothesis when it was actually false). It is 1 - statistical power of the test. Thus, increasing power of the test decreases this error.How are the type I error and type II error are related to level of significance?The probability of committing the type I error is called the significance level of the hypothesis test.
And the more we increase the level of significance, the less area the test statistic gets to fall in, and its chances of falling in region outside level of significance increases, which makes us to reject the null hypothesis more probable, thus, decreasing its chance of tagging as negative, not mattering if true or false.
Thus, increasing level of significance increases the type I error but decreases the type II error.
If it is increases, the likely area for test statistic falling increases, thus, increasing probability of tagging the null hypothesis tagging to be true, so increasing result of test being declared negative, thus, increasing type II error.
How is type II error and sample size related?Increasing sample size increases statistical power, thus, decreasing the type II error.
Thus, for the given case, as the sampling size is increased, the type II error will decrease, as the significance level is increased, the type II error will decrease, and as the standard error is increased, the type II error will increase with it.
Thus, out of the given factors, only the last factor (increasing the standard error) makes the type II error to get increased.
Thus, the factor that can alone make the type II error to increase is: Option C: The standard error is increased.
Learn more about type II error here:
https://brainly.com/question/26067196
Represent the following sentence as an algebraic expression, where "a number" is the letter x. You do not need to simplify.
The sum of 7 and the cube of a number.
The sum of 7 and the cube of a number.
Answer:
Step-by-step explanation:
7 + x³ is the sum of 7 and the cube of a number x
Robyn can rent an unfurnished apartment for $850 per month. The landlord requires first and last months' rent, plus a security deposit of $350. How much will Robyn have to pay before she can rent this apartment?
Answer:
2,050 dollars is how much she will have to pay
Step-by-step explanation:
∫eˣ²dx find integral show all steps
Answer:
[tex] \int \: e {}^{x {}^{2} } dx \\ y = {e}^{ {x}^{2} } \\ ln(y) = {x}^{2} \\ \frac{dy}{y} = 2xdx \\ dy/2x = {e}^{ {x}^{2} } dx \\ \int \: d( {e}^{ {x}^{2} } ) = \int {e}^{ {x}^{2} } .2xdx \\ \frac{{e}^{ {x}^{2} } }{2x} = \int \: {e}^{ {x}^{2} } dx \\ \int \: {e}^{ {x}^{2} } dx \: = \frac{1}{2x} {e}^{ {x}^{2} } + c[/tex]
Jennifer has a collection of 1,600 coins. Of the coins, 40% are dated before 1940, 35% are dated from 1940 to 1980, and the rest are dated after 1980. How many coins in Jennifer’s collection are dated after 1980?
Answer:
Step-by-step explanation:
40% + 35 % = 80 % so 20% are dated after 1980
20% is .20 in decimal form
.20 (1600) = 320 coins dated after 1980
You want to open a checking account at your local bank which offers two options. A standard checking account charges $6 each month plus $.25 for each check written. A select checking account charges $4.50 each month plus $.50 for each check written. Which system of equations can be used to determine the number x of checks that must be written in a month in order for the total charges y for the two checking accounts to be the same?
Answer:
The total charges for the two checking accounts will be the same after 6 checks written.
Step-by-step explanation:
Since I want to open a checking account at my local bank which offers two options, a standard checking account that charges $ 6 each month plus $ 0.25 for each check written, and a select checking account that charges $ 4.50 each month plus $ 0.50 for each check written, to determine which system of equations can be used to determine the number X of checks that must be written in a month in order for the total charges Y for the two checking accounts to be the same, the following calculation must be performed:
6 + 0.25X = Y
4.5 + 0.5X = Y
6 + 0.25x5 = Y
4.5 + 0.5x5 = Y
6 + 1.25 = Y = 7.25
4.5 + 2.50 = 7
6 + 0.25x6 = Y
4.5 + 0.5x6 = Y
6 + 1.50 = Y = 7.50
4.5 + 3 = 7.50
Therefore, the total charges for the two checking accounts will be the same after 6 checks written.
What is shrinkage in Accounting?
9514 1404 393
Explanation:
Shrinkage is the loss of inventory from causes other than normal use or sales. It is the difference between the inventory on the books and the amount of inventory actually available for use. Typical causes of shrinkage are theft, damage, fraud, counting error, administrative error.
[tex](w + \frac{4}{w} ) {}^{2} [/tex]
Find five consecutive odd numbers where the sum of the first three numbers is 15 greater than the sum of the final two numbers.
Answer:
the consecutive numbers are: 23, 25, 27, 29, 31.
Step-by-step explanation:
23+25+27 is 75
29+31 is 60
75-60 is 15
1
A train trip took 4 hours. For the trip, the train traveled at 60 kilometers per hour. For the
2
rest of the trip, the train traveled at 100 kilometers per hour. How far did the train travel
in all?
Answer:
320 kilometers
Step-by-step explanation:
1/2 -- (60 * 2) = 120 km
rest pf the trip -- 100 km per hour -- 2 hours left -- (100 * 2) = 200 km
Therefore, 120 + 200 = 320 km
Thenks and mark me brainliest :)
CAN SOMEONE TELL ME WHAT THIS IS PLEASE
Answer:
A = 533.8 square inches
Step-by-step explanation:
Use the surface area of a cylinder formula (A=2πrh+2πr^2)
Plug in 12 for h and 5 for r
Use 3.14 in replace for π
A = 2(3.14)(5)(12) + 2(3.14)(5)^2
A = 533.8 in^2
Step-by-step explanation:
55 square inches tall is the average cost of a house in the morning po everything is the same as
Solve using square roots: (x-6)^2=144
x^2-12x+36-144=0
x^2-12x-108=0
(x-18)(x+6)
X=18,-6
Five friends built a marble tower. The marble tower had a curved track. The track was designed so that the marbles would move down the track in a circular path. The track ended on the floor. Each friend predicted how he or she thought the marble would move when it rolled off the end of the track onto the floor. This is what they said:
Answer:
The best answer is of Keira's.
Step-by-step explanation:
The full question is as follows :
Given - Each friend predicted how he or she thought the marble would move when it rolled off the end of the track onto the floor.
This is what they said:
Magda : '' I think it will roll in circles.''
Soledad : '' I think it will curve for a bit and then straighten out.''
Allen : '' I think it will roll out in one big curve.''
Keira : '' I think it will roll in a straight line,''
Rafael : '' I think it will zigzag for a little while.''
To find - Which friend do you most agree with ?
Proof -
The best answer is Keira's.
The marble having the track will travel in a straight line.
The behavior is true for all objects.
If no outside force act on an object, the object will travel in a straight line at a constant speed.
When the marble leaves the end of the track, it is no longer in contact with the walls of the track.
That is , the marble has no longer a center-pushing force.
According to Newton's First law, an object remains at rest or in uniform motion in a straight line unless acted upon by an external force.
Since, there is no longer a center-pushing force so the marble rolls off the end of the track in a straight line path across the floor.
in 52469 6 is in the
Answer:
6 is in the tenths place.
Step-by-step explanation:
Each digit is a number has a place, and we start counting from left to the right.
52469
9 is in the units place
6 is in the tenths place.
4 is in the cents place.
2 is the thousandths place.
5 is in the ten thousandths place.
The question asks 6, which is in the tenths place.
The high school is 3.6 inches from the middle school on a map. Each half inch on the map represents 0.4 mile. What is the actual distance between the two schools?
2.88 miles
4.5 miles
7.2 miles
9 miles
Answer:
2.88 miles
Step-by-step explanation:
because 3.6/.5 = 7.2
then 7.2 × .4 = 2.88
Can someone help me really please
Answer:
Step-by-step explanation:
question
Answer:
the tank at the pet store
Step-by-step explanation:
5x4x2 = 40
35<40
what is the estamate 1/4 of 16
Answer:
4
Step-by-step explanation:
1/4 of 16 is the same as 16 divided by 4. 16 divided by four is 4.
I need help plsss I will give u more points
Answer:
The value of 0.9* 10² is D.90.4*(12-8)+2³4*4+2³16+824a.
False : it is to add 16+8
b.
False : its 8.
c.
True.
d.
False : its 24.
3.
side of cube [a]=2ft
volume of cube [V]=a³=2³=8ft³
He needs 1 bag to buy.As its volume is equal.
Suppose that only 2 percent of all people are geniuses. If an IQ test indicates that Albert is a genius, but the test is only accurate 90 percent of the time, then the probability that Albert really is a genius is roughly:
Answer:
P = 1,8 %
Step-by-step explanation:
From the whole population, only 2% are geniuses. But test results, are accurate 90 %. So the probability that Albert really is a genius is:
P = 0,02 * 0,9
P = 0,018 or P = 1,8 %
What is equavalent 3 11/40.
The best estimate close to this answer 3 11/40
A. 2 1/2
B. 3 Plzz help me
C. 3 1/2
D. 4
Answer:
C. 3 1/2Step-by-step explanation:
Estimate the fraction part of the number.
11/40 > 10/40 = 1/4We can estimate the fraction part as 1/2 since its greater than 1/4.
The number becomes 3 1/2.
Best choice is C
Answer:
11/40>10/40=1/4 is a part of ½
so
best estimate is 3 ½.
sonya got 8 out of 10 questions right on a quiz.she got the same score on a quiz that had 20 questions. how many questions did sonya get right on the second quiz? how many questions did she get wrong on the second quiz?
MUST SHOW WORK
Answer:
Sonya got 16 questions correct.
Step-by-step explanation:
8/10=80%
80%×20=16
(To check)
16/20=80%
Ross has a board that is 12 feet long. He needs to cut the board into equal pieces that are 1/2 feet long. How many pieces can she cutt
Answer:
13
Step-by-step explanation:
9514 1404 393
Answer:
24
Step-by-step explanation:
Assuming that making the cut does not change the total length of the board, each foot can be divided into two pieces that are 1/2 foot. The number of pieces will be ...
(12 ft)/(1/2 ft/piece) = (12×2) pieces = 24 pieces
Ross can make 24 pieces that are 1/2 ft long from her board.
Let A be the set of all lines in the plane. Define a relation R on A as follows. For every l1 and l2 in A, l1 R l2 ⇔ l1 is parallel to l2. (Assume that a line is parallel to itself). Which of the following is true for R?
A. R is reflexive.
B. R is symmetric.
C. R is transitive.
D. R is neither reflexive, symmetric, nor transitive.
Answer:
Hence, the relation R is a reflexive, symmetric and transitive relation.
Given :
A be the set of all lines in the plane and R is a relation on set A.
[tex]R=\{l_1,l_2\in A|l_1 \;\text{is parallel to}\; l_2\}[/tex]
To find :
Which type of relation R on set A.
Explanation :
A relation R on a set A is called reflexive relation if every [tex]a\in A[/tex] then [tex](a,a)\in R[/tex].
So, the relation R is a reflexive relation because a line always parallels to itself.
A relation R on a set A is called Symmetric relation if [tex](a,b)\in R[/tex] then [tex](b,a)\in R[/tex] for all [tex]a,b\in A[/tex].
So, the relation R is a symmetric relation because if a line [tex]l_1[/tex] is parallel to the line [tex]l_2[/tex] the always the line [tex]l_2[/tex] is parallel to the line [tex]l_1[/tex].
A relation R on a set A is called transitive relation if [tex](a,b)\in R[/tex] and [tex](b,c)\in R[/tex] then [tex](a,c)\in R[/tex] for all [tex]a,b,c\in A[/tex].
So, the relation R is a transitive relation because if a line [tex]l_1[/tex] s parallel to the line [tex]l_2[/tex] and the line [tex]l_2[/tex] is parallel to the line [tex]l_3[/tex] then the always line [tex]l_1[/tex] is parallel to the line [tex]l_3[/tex].
Therefore the relation R is a reflexive, symmetric and transitive relation.
Evaluate the expression when x= -2.
х2+бх+9
Answer:
1
Step-by-step explanation:
x = - 2
x^2 + 6x + 9
= ( - 2 )^2 + 6 ( - 2 ) + 9
= 4 - 12 + 9
= 4 + 9 - 12
= 13 - 12
= 1
Lexi is hiking a trail that is 7.5 miles long. She stops to take a break after hiking 3.8 miles of the trail. Which equation can be used to find how many miles, m, Lexi has left to hike
Answer:
7.5 - 3.8 = m
Step-by-step explanation:
The equation can be used to determine the number of miles (m) Lexi has left to hike will be m + 3.8 = 7.5.
What is subtraction?It simply implies subtracting something from an entity, group, location, etc. Subtracting from a collection or a list of ways is known as subtraction.
Lexi is hiking a trail that is 7.5 miles long. She stops to take a break after hiking 3.8 miles of the trail.
Then the equation can be used to determine the number of miles (m) Lexi has left to hike will be
Let m be the number of miles left. Then we have
m + 3.8 = 7.5
Subtract 3.8 on both sides, then we have
m = 3.7
More about the subtraction link is given below.
https://brainly.com/question/4319655
#SPJ2
simplify the expression 9n+1/4+6y+4n-4y
Answer: =13n+2y+1/4
Step-by-step explanation: Hope this help :D
Let simplify step by step
9n+1/4+6y+4n-4y
=9n+1/4+6y+4n-4y
combine like terms:
=9n+1/4+6y+4n+-4y =(9n+4n) +(6y+-4y) +(1/4)
=13n+2y+1/4 Hope
7 has been subtracted from the product of x and 7=
Answer:
7x - 7
Step-by-step explanation:
Product of x and 7 = 7x
7 minus 7x
7x - 7
Hence the expression is :
7x - 7
The data are from a small moving company that moves people from urban apartment buildings to other urban apartment building in the same or different cities. The company needs assistance in predicting the labor hours for jobs so they can provide more accurate price quotes.
Run two separate regressions using the data in the sections of the spreadsheet titled Regression Model 1 and Regression Model 2. Use a 95% confidence level.
Fill in all the blanks below. Do not round any numbers except for when entering them in the blanks for this quiz, round these numbers to exactly 2 decimal places even if the number has only one or no decimal places. Use commas to separate thousands (e.g., 1225 should be entered as 1,225.00).
Regression Model 1
R Square expressed as a percentage rounded and carried out to two decimal places is ________% and Adjusted R Square expressed as a percentage rounded and carried out to two decimal places is _______%. Refer to the spreadsheet embedded in your Module 14 Regression document I provided you to see the calculation and format for answering this next question. The gap between R Square and Adjusted R Square expressed as a percentage rounded and carried out to two decimal places is 0.______%.
The overall regression model (was / was not) _______ significant.
Using square footage of 1,500 and mileage of 92, the model estimates that ______ hours of labor would be required, with a margin of error of _________ hours.
Regression Model 2
R Square expressed as a percentage rounded and carried out to two decimal places is _______% and Adjusted R Square expressed as a percentage rounded and carried out to two decimal places is _______%. Refer to the spreadsheet embedded in your Module 14 Regression document I provided you to see the calculation and format for answering this next question. The gap between R Square and Adjusted R Square expressed as a percentage rounded and carried out to two decimal places is 0.________%.
The overall regression model (was / was not) __________ significant.
Using square footage of 1,500, mileage of 92, and floors of 71, the model estimates that _________ hours of labor would be required, with a margin of error of ________ hours.
Model Selection
Because the R Square is (higher / lower) _________ in regression model 1 than in regression model 2 and the gap between R Square and Adjusted R Square is (smaller / larger) in regression model 1 than in regression model 2 _________ and the margin of error of the estimated labor hours is (smaller / larger) _________ in regression model 1 than in regression model 2 , we would characterize regression model (1 or 2) ___________ as being the better model.
Answer:
I wish I can read all the text
HELP PLEASE!!
Explain the error in the following exercise;
then correct it.
Answer:
2/1x7/6=14/6=7/3
Step-by-step explanation:
Multiply the 2 by the 7 but Not the 6. So the second number is 14/6, not 14/12.
‘Then simplify 14/6 to 7/3
8. 3x + 5 > 16, x is an integer. Find
the smallest value of x.
9514 1404 393
Answer:
4
Step-by-step explanation:
Undo what is done to x.
3x > 11 . . . . . subtract 5
x > 11/3 = 3 2/3 . . . . divide by 3
The smallest value of x is 4.
2+2 brain time yessir
Answer:
Step-by-step explanation:
4 is the correct answer