Which structure could a scientist look for in a plant that would identify it as a club moss rather than a liverwort?
O phloem
O spores
O rhizoids
O flowers
Answer:
what e said
Explanation:
Just wanted to know what the response time is :)
160 g or an element with a molar mass of 40 = __ moles?
Answer:
4 moles
Explanation:
The formula of finding moles is
moles = mass / molar mass, therefore
moles = 160 g / 40 g/mol = 4 moles
An overhead view of two people at the start of a maze. The person in a purple shirt has a line running forward, right, backward, right, forward, ending with an arrowhead pointing to a large gold star. The person in a green shirt has a line running forward, right, backward, right, forward, right, backward, right, forward, ending with an arrowhead pointing to a small gold star.
Zamir and Talia raced through a maze. Zamir walked 2 m north, 2 m east, 4 m south, 2 m east, 4 m north, 2 m east, 3 m south, 4 m east, and 4 m north. Talia walked 2 m north, 6 m east, 3 m south, 4 m east, and 4 m north.
Compare their distances:
Zamir walked
meters and Talia walked
Answer:
Zamir walked
27
meters and Talia walked
19
meters.
Explanation:
27 and 19
Answer:
zamir:27 Talia:19
Explanation:
i got it right on my test :)
To measure the amount of iron in a certain type of iron ore, an analytical chemist dissolves a sample in strong acid and titrates it to the endpoint with of potassium permanganate solution. The balanced chemical equation for the reaction is:
Answer:
[tex]\% Fe=11.4\%[/tex]
Explanation:
Hello!
In this case, for the described chemical reaction, we find it is:
[tex]8H^+(aq)+5Fe^{2+}(aq)+MnO_4^-(aq)\rightarrow 5Fe^{3+}(aq)+Mn^{2+}(aq)+4H_2O(l)[/tex]
Because it says that the iron is dissolved in a strong acid which provides addition hydrogen ions to the reaction media. Thus, for the questions attached on the figure we find:
- This a REDOX reaction because we see iron is being oxidized from 2+ to 3+ and manganese reduced from +7 to +2.
- Since it is a redox reaction and the oxidized species is that undergoing an oxidation number increase, we evidence iron goes from +2 to +3, which means iron is the oxidized species.
- In this case, for the used 59.2 mL (0.0592 L) of the 0.2000 M solution of potassium permanganate, we can compute the consumed grams of iron via stoichiometry including the 5:1 mole ratio between them in the chemical reaction:
[tex]m_{Fe^{2+}}=0.0592L*0.2000\frac{molMnO_4^-}{L}*\frac{5molFe^{2+}}{1molMnO_4^-} *\frac{55.85gFe^{2+}}{1molFe^{2+}} \\\\m_{Fe^{2+}}=3.31gFe^{2+}[/tex]
It means that the percent of iron in that sample is:
[tex]\% Fe=\frac{3.31g}{29.00g} *100\%\\\\\% Fe=11.4\%[/tex]
Best regards.
Determine the wavelength of the energy that needs to be absorbed for a 3p electron in chlorine to be promoted to the 4s subshell. Assume that Zeff=6 for a chlorine atom.
Answer:
The wavelength of the energy that needs to be absorbed = 52.36 nm
Explanation:
For this study;
Let consider the Rydgberg equation from Bohr's theory of atomic model:
i.e.
[tex]\dfrac{1}{\lambda} = R_H (Z^*)^2( \dfrac{1}{n_1^2}-\dfrac{1}{n_2^2})[/tex]
where
Z* = effective nuclear charge of atom = Z - σ = 6
n₁ = lower orbit = 3
n₂ = higher orbit = 4
[tex]R_H[/tex] = Rydyberg constant = 1.09 × 10⁷ m⁻¹
λ = wave length of the light absorbed
∴
[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(6)^2( \dfrac{1}{3^2}-\dfrac{1}{4^2})[/tex]
[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(36)( \dfrac{1}{9}-\dfrac{1}{16})[/tex]
[tex]\dfrac{1}{\lambda} = 392400000\times0.0486111111[/tex]
[tex]\dfrac{1}{\lambda} =19075000[/tex]
[tex]\lambda = \dfrac{1}{19075000}[/tex]
[tex]\lambda = \dfrac{1}{1.91\times 10^7 \ m^{-1}}[/tex]
[tex]\lambda = 5.236 \times 10^{-8} m[/tex]
[tex]\lambda = 52.36 \times 10^{-9} m[/tex]
[tex]\lambda = 52.36\ n m[/tex]
Therefore, the wavelength of the energy that needs to be absorbed = 52.36 nm
Choose all the answers that apply.
Which of the following energy forms are involved in a nuclear power plant?
heat
sound
mechanical
electrical
nuclear
Answer:
heat, electrical, mechanical, nuclear,sound
Explanation:
The power plant is mechanicalised so it produce heat which is in form of electrical and then we start hearing sound
Why is fusion not a practical source of energy?
Answer:
Light i think
Explanation:
light is a source of energy also
10 POINTS PLS HELP
Combustion occurs when _____.
oxidation reactions are very slow
oxidation reactions are so fast the substance catches fire
oxygen is removed from another substance
machines use chemical energy to do work
Answer: oxidation reactions are so fast the substance catches fire
Explanation:
Answer:
When oxidation reactions are so fast the substance catches fire
Explanation:
because i am big bwain
Which functional group is found in an ESTER?
R
R
O=O
R
OR
O
R- OH
R-NH2
Answer:
its hydroxy and alkoxy
Explanation:
ester is mainly formed by substitution reaction of carboxylic acid and alcohol
The esters are generally produced as a result of the reaction called esterification. They are generally derived from carboxylic acids. The functional group present in ester is OR. The correct option is E.
The chemical compounds which are derived from an acid either organic or inorganic in which at least -OH ( hydroxyl group ) is replaced by an -O- alkyl group ( alkoxy ) group are called esters. Generally an ester can be represented as R - C = O - OR.
The chemical compounds that are formed by the reaction of an acid and alcohol by losing water molecule can be defined as the esters.
To know more about esters, visit;
https://brainly.com/question/30404138
#SPJ7
Please help!!!!!
Please help!!!!!
Answer:
1.B
2.A
3. B
Explanation:
1. A chemical bond is the physical phenomenon of chemical substances being held together by attraction of atoms to each other through sharing
2. so 2 is electrons of one atom are transferred permanently to another atom.meaning the answer is A
3. is When atoms combine by forming covalent bonds, the resulting collection of atoms is called a molecule. We can therefore say that a molecule is the simplest unit of a covalent compound.
A chemical bond is an attraction between two atoms.
A ionic bond is A bond formed when atoms transfer electrons.
Write the balanced net ionic equation for the reaction of aqueous sodium sulfate with aqueous lead(II) nitrate. Include phases.
net ionic equation:
Answer:
SO₄²⁻ (aq) + Pb²⁺ (aq) → PbSO₄ (s)
General Formulas and Concepts:
Solubility RulesExplanation:
Step 1: RxN
Na₂SO₄ (aq) + Pb(NO₃)₂ (aq) → PbSO₄ (s) + NaNO₃ (aq)
Step 2: Balance RxN
Na₂SO₄ (aq) + Pb(NO₃)₂ (aq) → PbSO₄ (s) + 2NaNO₃ (aq)
Step 3: Ionic Equations
Total Ionic Equation:
2Na⁺ (aq) + SO₄²⁻ (aq) + Pb²⁺ (aq) + 2NO₃⁻ → PbSO₄ (s) + 2Na⁺ (aq) + 2NO₃⁻ (aq)
Cancel out spectator ions.
Net Ionic Equation:
SO₄²⁻ (aq) + Pb²⁺ (aq) → PbSO₄ (s)
Naming inconic compounds and lots of iconic naming
if you just look up the answer it comes up btw!!
have a great day
Why do you think your new patient, Elisa, is feeling tired all the time? Explain your ideas.
The most plausible reason why your new patient, Elisa, is feeling tired all the time is:
Her body is unable to break down the starch into glucoseAccording to the complete question, we can see that the cells which are in Elise's body are receiving oxygen and proteins, but they are not getting enough glucose, which can be gotten from breaking down starch.
As a result of this, we can see that the best diagnoses of why Elise is always getting tired is that she has diabetes because of the inability of the body to break down starch to provide enough glucose to the body.
Read more here:
https://brainly.com/question/18470980
Which is the Lewis structure for H3PO4? An upper P is single bonded above to an O, and to the left, right, and below to an O single bonded to an H. The O above the P has three pairs of dots to the left, above, and below; the O's to the sides have pairs of dots above and below, and the O below the P has pairs of dots right and left. A central upper P is single bonded left, right, above, and below to upper Os. The O above the P is single bonded to upper H on the left and the right, and has two electron dots above it. The O below the P is single bonded to an H below, and has pairs of electron dots to the left and right. A central upper P is double bonded to an O above, and single-bonded to an upper O single-bonded to an upper H to the left and the right. The O above the P has three pairs of electron dots, to the left, above, and to the right; the O's to the right and left have pairs of dots above and below. A central upper P is bonded to an upper H above, an upper O below, and upper O's bonded to upper H's to the left and the right. The O below the P has three pairs of electron dots, to the left, right, and below; the other two O's have pairs of dots above and below. A central upper P is double bonded to an O above, and single-bonded to an upper O single-bonded to an upper H to the left and the right. The O above the P has three pairs of electron dots, to the left, above, and to the right; the O's to the right and left have pairs of dots above and below.
Answer:
It is A.
Explanation:
I took the test.
The Lewis structure shows the arrangement of valence electrons in H3PO4.
The Lewis structure gives us a picture of the number of valence electrons in a molecule. This is because, in a Lewis structure, the electrons in the molecule are shown as dots. A single line may be used to show shared electrons in a covalent bond.
The correct Lewis structure of H3PO4 is an upper P is single bonded above to an O, and to the left, right, and below to an O single bonded to an H. The O above the P has three pairs of dots to the left, above, and below; the O's to the sides have pairs of dots above and below, and the O below the P has pairs of dots right and left.
Learn more: https://brainly.com/question/4144781
How many milliliters of alcohol are present in 720 mL of brandy?
Answer:
Answer : The volume of water and alcohol present in 675 mL of this solution is 405 mL and 270 mL respectively.
Explanation: As we are given that 40.0 % (v/v) alcohol solution. That means, 40.0 mL of alcohol present in 100 mL of solution.
Now we have to calculable the volume of alcohol in 675 mL solution.
As 100 mL of solution contains 40.0 mL of alcohol
So, 675 mL of solution contains alcohol
Thus, the volume of alcohol = 270 mL
Now we have to calculate the volume of water.
The volume of water = Volume of the solution - Volume of alcohol
Volume of water = 675 mL - 270 mL
The volume of water = 405 mL
Thus, the volume of water = 405 mL
Hence, the volume of water and alcohol present in 675 mL of this solution is 405 mL and 270 mL respectively.
The 720mL of an 80-proof brandy which is 40.0% (v/v) ethyl alcohol, contains 288 mL of ethyl alcohol.
What is volume/volume percentage?The Percent solutions can be expressed in the form of volume/volume percentage, weight/volume percentage, or, weight/weight percentage. The concentration of the solution in percentage is calculated as the fraction of the weight or volume of the solute related to the total weight or volume of the solution.
The solution where concentration requires to be represented in volume percent (v/v%) when the solute is a liquid phase. It is also applicable to the numerator and the denominator in volume units and is called volume/volume percent.
Volume percentage = (Volume of solute/volume of solution) x 100
The given brandy has ethyl alcohol the v/v % is 40 %.
It means the 40 ml of ethyl alcohol is present in the 100ml of brandy
Given the volume of brandy = 720 ml
Volume of ethyl alcohol in 720 ml of brandy = (40/100)×720 = 288 ml
Therefore, 288 ml of ethyl alcohol is present in 720 ml of brandy which is 40.0% (v/v) ethyl alcohol.
Learn more about volume/volume percentage, here:
https://brainly.com/question/13558694
#SPJ2
Your question is incomplete, but most probably complete question was,
An 80 proof brandy is 40.0% (v/v) ethyl alcohol. The "proof" is twice the percent concentration of alcohol in the beverage. How many milliliters of alcohol are present in 720 mL of brandy?
please help me out I need some ideas for cell city project or comic strip by tonight or if you did it already lemme copy it={
Answer:
Can you give me your snap, so I can send you the foto
5. Psilocybin is made of C 50.70%, H 6.03%, N 9.86%, 22.51%, P 10.90%. a. Find the empirical formula.
The empirical formula : C₁₂H₁₇N₂O₄P
Further explanationThe empirical formula is the smallest comparison of atoms of compound =mole ratio of the components
The principle of determining empirical formula
Determine the mass ratio of the constituent elements of the compound. Determine the mole ratio by by dividing the percentage by the atomic massC
[tex]\tt \dfrac{50.7}{12}=4.225[/tex]
H[tex]\tt \dfrac{6.03}{1}=6.03[/tex]
N[tex]\tt \dfrac{9.86}{14}=0.704[/tex]
O[tex]\tt \dfrac{22.51}{16}=1.407[/tex]
P[tex]\tt \dfrac{10.9}{31}=0.352[/tex]
Divide by the smallest mole ratio(0.352)
C : H : N : O : P
[tex]\tt C\rightarrow \dfrac{4.225}{0.352}=12[/tex]
[tex]\tt H\rightarrow \dfrac{6.03}{0.352}=17[/tex]
[tex]\tt N\rightarrow \dfrac{0.704}{0.352}=2[/tex]
[tex]\tt O\rightarrow \dfrac{1.407}{0.352}=4[/tex]
[tex]\tt P\rightarrow \dfrac{0.352}{0.352}=1[/tex]
Consider the two electron arrangements for neutral atoms A and B. What is the atomic number of A?
A - 1s?, 2s 2p6,35
B - 1s2, 2s 2p, 5s
What is the momentum of a cat of mass 4 kg that is running south with a speed of 1.5 m/s?
A. 2.7 kg•m/s south
B. 6.0 kg•m/s south
C. 8.3 kg•m/s south
D. 7.1 kg•m/s south
Answer:
option B is correct
Explanation:
momentum(p)=mv
mass= m=4 kg
velocity=v=1.5 m/s
P=4kg*1.5 m/s=6.0 kg.m/s
so option B is correct
22. In 4f12, the 12 stands for the
The 12 stands for the number of electrons that fill the f orbital
Further explanationIn an atom there are levels of energy in the shell and sub shell
This energy level is expressed in the form of electron configurations.
Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f. The maximum number of electrons for each sub shell is
• s: 2 electrons
• p: 6 electrons
• d: 10 electrons and
• f: 14 electrons
4f¹² :
4 : number of shell
12 : the number of electrons that fill the f orbital
How many milliliters of a 3.4 M NaCl solution would be needed to prepare each solution?
a. 45 mL of a 0.10 M solution:
mL
b. 330 mL of a 0.074 M solution:
mL
Answer:
a. Approximately [tex]1.3\; \rm mL[/tex].
b. Approximately [tex]7.2\; \rm mL[/tex].
Explanation:
The unit of concentration "[tex]\rm M[/tex]" is equivalent to "[tex]\rm mol \cdot L^{-1}[/tex]", which means "moles per liter."
However, the volume of both solutions were given in mililiters [tex]\rm mL[/tex]. Convert these volumes to liters:
[tex]\displaystyle 45\; \rm mL = 45\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.045\; \rm L[/tex].
[tex]\displaystyle 330\; \rm mL = 330\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.330\; \rm L[/tex].
In a solution of volume [tex]V[/tex] where the concentration of a solute is [tex]c[/tex], there would be [tex]c \cdot V[/tex] (moles of) formula units of this solute.
Calculate the number of moles of [tex]\rm NaCl[/tex] formula units in each of the two solutions:
Solution in a.:
[tex]n = c \cdot V = 0.045\; \rm L \times 0.10\; \rm mol \cdot L^{-1} = 0.0045\; \rm mol[/tex].
Solution in b.:
[tex]n = c \cdot V = 0.330\; \rm L \times 0.074\; \rm mol \cdot L^{-1} = 0.02442\; \rm mol[/tex].
What volume of that [tex]3.4\; \rm M[/tex] (same as [tex]3.4 \; \rm mol \cdot L^{-1}[/tex]) [tex]\rm NaCl[/tex] solution would contain that many
For the solution in a.:
[tex]\displaystyle V = \frac{n}{c} = \frac{0.0045\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0013\; \rm L[/tex].
Convert the unit of that volume to milliliters:
[tex]\displaystyle 0.0013\; \rm L = 0.0013\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 1.3\; \rm mL[/tex].
Similarly, for the solution in b.:
[tex]\displaystyle V = \frac{n}{c} = \frac{0.02442\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0072\; \rm L[/tex].
Convert the unit of that volume to milliliters:
[tex]\displaystyle 0.0072\; \rm L = 0.0072\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 7.2\; \rm mL[/tex].
Regional Metamorphism occurs when great masses of rock are exposed to pressure. What does this typically form?
Answer:
Gneiss forms by regional metamorphism from both high temperature and pressure. Quartzite and marble are the most commonly used metamorphic rocks.
J.J. Thomson's plum pudding model of the atom followed the discovery of
A)
negatively charged particles with a very small mass.
B)
positively charged particles with a very large mass.
0)
negative electrons that revolved around a positive nucleus.
D)
positively charged protons that were contained in a concentrated area.
J.J. Thomson's plum pudding model of the atom followed the discovery of negatively charged particles with a very small mass. Thus, the correct option for this question is A.
Who was J. J. Thomson?J.J. Thomson was a British physicist who discovered sub-atomic particles known as electrons within an atom. He also announced that atoms are made up of smaller components.
The plum pudding model is defined by Thomson in order to demonstrate that negatively charged sub-atomic particles known as electrons are surrounded by a volume of positively charged particles known as protons. It is one of the historical scientific model of the atom that governs all sorts of properties of sub-atomic particles.
Therefore, "negatively charged particles with a very small mass" is the discovery that follows J.J. Thomson's plum pudding model of the atom. Thus, the correct option for this question is A.
To learn more about the Plum pudding model, refer to the link:
https://brainly.com/question/4839193
#SPJ2
Describe how this instrument works.
Operation:
Answer:
Microscope
Explanation:
Answer:
its a telescope you see stars or plants
Explanation:
PLEASE HURRT I NEED HELP ASAP !!!!!!!!!!!!!!
Answer:
I think its b
Explanation:
well because thermal energy its connected to kidnetic energy
How many electrons are in the nucleus of an atom with an atomic number of
16?
O None. Electrons are not in the nucleus
08
O 16
O 32
Answer:
None. Electrons are not in the nucleus.
Explanation:
We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus. Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.
Symbol of proton= P⁺
Symbol of neutron= n⁰
The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons. The umber of protons and electrons are always equal to make the atom electrically neutral .
The atom having atomic number 16 have 16 electrons and these electrons are present out side the nucleus.
True or False: Scientists use what they know about the properties of different molecules to separate mixtures. *
Answer:
True
Explanation:
Mixtures are substances with indefinite composition. They consist of two or more elements and or compounds in any proportion by mass.
Their constituents retain their identities i.e. physical properties are retained. Their constituents reacts differently to changed conditions. They can easily be separated into constituents by physical methods.From these properties we can clearly identify that to separate mixtures, we use the differences in the chemical properties of the constituents of the mixtures.
When comparing plant and animal cells which statement is least accurate?
Plant cells have a cell wall and animal cells do not.
Plant cells have chloroplasts and animal cells do not.
Plant cells have a large central vacuole and animal cells do not.
Plant cells have cell membranes and animal cells do not.
Which is a valid reason why total dissolved solids (TDS) cannot be accurately calculated by conductivity alone?
Global warming has significantly increased the conductivity of water.
Big blobs of algae do not conduct electricity.
Fish poop changes the conductivity.
Ionic compounds may behave differently based on ion characteristics (e.g. charge or size).
Some dissolved solids may be nonelectrolytes.
Answer:
The correct option is the last option (Some dissolved solids may be nonelectrolytes)
Explanation:
Total dissolved solids (TDS) cannot be calculated by conductivity alone because conductivity involves ionic charges and there are solids that dissolve in water but do not carry ionic charges (and thus form non-electrolytes). Examples include sucrose (common sugar) and glucose. These two solids will dissolve in water but would not form ions that will carry ionic charges which are responsible for conductivity. Thus, if TDS only depends solely on conductivity, then a solution that contains dissolved sucrose will be wrongly accounted for as the sucrose will be omitted from the dissolved substances.
A valid reason why total dissolved solids (TDS) cannot be accurately
calculated by conductivity alone because some dissolved solids may be
non-electrolytes.
Conductivity means the ability of electric current to pass through a
substance and an electrolyte has a high conductivity when dissolved in
water.
Dissolved solids can't be measured by conductivity because not all
dissolved solids are electrolytes.
Read more on https://brainly.com/question/19457008