Answer:
10 ohms
Explanation:
V = IR
2 v is the drop in the battery
2 = .2 R
R = 10 ohms
Which graph shows an object with constant acceleration?
A graph titled Velocity versus Time shows time in seconds on the x axis, numbered 0 to 10, and velocity in meters per second on the y axis, numbered 0 to 50. A line starts at the origin and goes to (4, 40), then a line from (4, 40) to (9, 40) and a line from (9, 40) to (10, 0).
A graph titled Velocity versus Time shows time in seconds on the x axis, numbered 0 to 5, and velocity in meters per second on the y axis, numbered 0 to 10. A line starts at (0, 10) and ends at (5, 0).
A graph titled Velocity versus Time shows time in seconds on the x axis, numbered 0 to 5, velocity in meters per second on the y axis, numbered 0 to 35. A curved line starts at the origin and arcs up to (4.3, 35).
The graph in the question that represents an object with constant acceleration is : Graph A
Description of constant accelerationAcceleration is the change in velocity with time. For graph A the acceleration remained constant as the velocity of the object did not change with the change in time. As the time changes from 4 to 9 seconds the velocity of the object remained at 40 before decelerating to 0. This shows that the acceleration of the object was constant.
Hence we can conclude that The graph that shows an object with constant acceleration is : Graph A
Learn more about constant acceleration : https://brainly.com/question/11353721
A hiker, weighing 560 newtons, takes 140 seconds to walk to the top of a hill with a height of 60 meters. How much power does the hiker develop?
A. 240 W
B. 1300 W
C. 2400 W
D. 78,000 W
Answer:
A -- 240
Explanation:
It takes around 270 to cycle more newtons up a hill
A net force of 15N is applied to a cart with a mass of 5kg. What is the
acceleration of the cart?
Answer:
3 m/s^2
Explanation:
Simply F = ma
15 = 5 a
a = 3 m/s^2
What is the definition of a surface wave?
Answer:
A surface wave is a wave that travels on the crust of the earth after an earthquake; surface waves cause the destruction of an earthquake
Explanation:
A surface wave is a wave that travels on the crust of the earth after an earthquake; surface waves cause the destruction of an earthquake
8.
A microscopic view of a sheet of paper is shown in the diagram at the
right. Would you expect this sheet of paper to cause light to undergo
regular or diffuse reflection?
Explain.
9.
From what type of surface do you think it would be easier to read?
From pages, which are rough, or from pages which are smooth and
glossy?
Explain your answer.
A microscopic view
of a sheet of paper.
10. Driving at night offers a great example of diffuse vs. regular reflection. A dry road is a diffuse
reflector, while a wet road is not. On the diagrams below, sketch the reflected light off a wet and dry
surface.
Dry Surface
Wet Surface
Why would the wet road appear to the driver to be darker than the dry road?
11. The diagram below contrasts the reflection of light off a smooth surface (left) with the reflection of
light off a rough surface (right). Compare the two diagrams and explain why the reflected rays for a
rough surface do not result in the formation of an image.
Based on the nature of reflection of light from surfaces, smooth surfaces produce regular reflection while rough surfaces produce diffuse reflection.
What is reflection of light waves?Reflection of light waves refers tobtye bouncing back of light waves when they hit a shiny surface.
Depending on the nature of the surface, reflection of light waves can either be regular if diffuse.
Smooth surfaces produce regular reflection while rough surfaces produce diffuse reflection.
Based on the properties of reflection:
A microscopic view of a sheet of paper shows that the surface is rough, thus it would produce diffuse reflection. Rough pages are easier to read from than smooth and glossy surfaces because they produce diffuse reflection while reading off smooth surface causes a glare due to intense regular reflectionA wet road appears darker because more light passes through and it reflects less light and looks darkerdiffuse reflection do not all pass through the principal focus, thus an image is not formed off a rough surfaceTherefore, it can be concluded that the rough surfaces produce diffuse reflection while smooth and glossy surfaces produce regular reflection.
Learn more about reflection at: https://brainly.com/question/377660
Which nasa spacecraft is studying jupiter and its moons?.
Answer:
Juno
Explanation:
The NASA spacecraft Juno (2016) is the one that was studying Jupiter more in detail.
I hope it helps! Have a great day!
Anygays-
For added effect, he takes the monitor up to the roof which is about 84 m above the ground. What is the velocity of the monitor as it hits the ground?
The velocity of the monitor as it hits the ground is equal to 40.58 m/s.
Given the following data:
Height = 84 meters.Scientific data:
Acceleration due to gravity (g) = [tex]9.8 m/s^2.[/tex]How to calculate the velocity.In accordance with the law of conservation of energy, the potential energy possessed by the monitor at the roof top would be equal to the kinetic energy possessed by the monitor at the ground:
[tex]PE=KE\\\\mgh=\frac{1}{2}mv^2\\\\2mgh=mv^2\\\\V=\sqrt{2gh}\\\\V=\sqrt{2 \times 9.8 \times 84}\\\\V=\sqrt{1646.4}[/tex]
V = 40.58 m/s.
Read more on kinetic energy here: brainly.com/question/1242059
What are the differences between tidal power and hydroelectric power?
Thanks to anyone who helped
Answer: With Hydroelectric power water is artificially stored in a high place, so it can be released and flow to a low place and through a generator. With Tidal energy the movement of water is also used to power a generator, but the flow of water is caused by the changing tides.
At what temperature are Celsius and Fahrenheit equal?
Answer:
Celsius and Fahrenheit are the same at
— 40 degree since the scales converge.
Celsius and Kelvins become equal at
high temperature as the difference of
273.15 between them gets lost in the
noise. 0 degree Celsius is equal to 32
degrees Fahrenheit.
Help, Please.
A, B, C, or D
Answer:
B
Explanation:
Answer:
B
Explanation:
A momentum does not stop it is conserved
C momentum is a vector quantity while energy is a scalar there is a difference
D momentum can't be formed a new it is still conserved
A block of mass 3. 0 kg is hung from a spring, causing it to stretch 12 cm at equilibrium, as shown above. The 3. 0 kg block is then replaced by a 4. 0 kg block, and the new block is released from the position shown above, at which the spring is unstretched. How far will the 4. 0 kg block fall before its direction is reversed?.
Based on the length of the spring and the mass of the block, the distance the 4.0 kg block can fall before a reversal in direction is 32 cm.
How do we arrive at 32cm?Because energy is conserved, the distance the block can drop can be found as:
Mass x gravity x distance = (1 / 2) x spring constant x distance ²
Spring constant:
= (Mass x gravity) / distance
= (3 x 9.8) / 12
= 2.45 cm
Distance is:
Mass x gravity x distance = (1 / 2) x spring constant x distance ²
distance = (2 x Mass x gravity) / spring constant
= (2 x 4 x 9.8) / 2.45
= 32 cm
Find out more on spring constants at https://brainly.com/question/1616151.
Why are alloys made from many metals
Answer:
It add strength to the metal, along with other enhanced chemical properties. Hardness, machinability, and corrosion resistance are other properties that can be added or enhanced by creating an alloy.
I hope my answer helps you.
Describe the rise and fall of a basketball using the concepts of kinetic energy and potential energy.
Answer:
in the beginning the kinetic energy is at a maximum level because the starting velocity is high comparatively.. and because of the gravitational acceleration acting on the ball in the opposite direction the kinetic energy drops proportionally because of the velocity drop. after the ball reaches it's maximum height the potential energy of the ball is high because of the height.. and again the kinetic energy starts to build because the ball again starts to fall down..
Explanation:
Hope this was helpful
Which planets are terrestrial? select three options. jupiter mars mercury uranus venus
Mars, mercury, and venus are the planets that are terrestrial planets.
What is the terrestrial planet?A terrestrial planet is one that is predominantly made up of silicate rocks or metals. The inner planets nearest to the Sun, are Mercury, Venus, Earth, and Mars, as terrestrial planets within the solar system.
Mars, mercury, and venus are the planets closest to the sun.
Hence mars, mercury, and venus are the planets that are terrestrial planets.
To learn more about the terrestrial planet refer to the link;
https://brainly.com/question/18089177
Which two energy sources can help a star maintain its internal thermal pressure?.
What would happen to jupiter if we could somehow double its mass?.
Answer:
G M m / R^2 attraction of Jupiter to sun where m is mass of Jupiter
m V^2 / R centripetal force acting on Jupiter
R = G M / V^2
The radius would be unchanged, and its orbit would be unchanged
Second Exercise: The circuit breaker in a kitchen (6.5 points) The electrical installation in a kitchen is fed by a sinusoidal alternating voltage of effective value U = 220 V. This installation includes the following electrical appliances: A refrigerator; A washing machine; An electric water heater (which can be considered as a resistor) of power P = 1540 W; An incandescent lamp carrying the following indications (220 V, 100 W). . 1) These electrical appliances are connected in parallel. Why? 226
Answer:
can you clear more I don't understand
Use the table to answer the question.
Planet
Estimated Mass of Planet (1024 kg)
Venus
4.87
Mars
0.642
Jupiter
1.898.0
Neptune
102.0
A spacecraft flies within 500.000 km of each of these planets. Which one would gravitationally attract the spacecraft the most?
3
Venus
Mars
Jupiter
Neptune
Answer:
Jupiter is by far the largest.
G = K M / R^2 = K C M since R is given as 5E5 km
G = gravitational attraction
Cacharrerosdelaweb. Com 2019 12 que es keylogger html.
Los keyloggers son software o hardware que tienen la función de guardar la información que se escribe en el teclado de una computadora.
¿Qué es keylogger?Un keylogger es un término para referirse a un software o hardware que tiene la función de seguir y registrar todas y cada una de las pulsaciones que se hacen en el teclado de una computadora.
Generalmente, los keyloggers son formar ilícitas de obtener información confidencial del usuario de un computador sin su consentimiento. En los últimos años, se ha relacionado a los keyloggers con actividad digital delictiva debido a que es una de las formas que utilizan los criminales para robar información confidencial como cuentas bancarias.
Aprenda más sobre keyloggers en: https://brainly.com/question/17231901
Questions #4, 5, and 6:
Part 1 of 3: Two moles of helium gas initially at 335 K and 0.58 atm are compressed isothermally to 1.44 atm. Find the final volume of the gas. Assume that helium behaves as an ideal gas. The universal gas constant is 8.31451 J/K · mol. Answer in units of m³.
Part 2 of 3: Find the work done by the gas. Answer in units of kJ.
Part 3 of 3: Find the thermal energy transferred. Answer in units of kJ.
For two moles of helium gas initially at 335 K and 0.58 atm are compressed isothermally to 1.44 atm, The solutions are is mathematically given as
V2=0.03818 m3W=-5.065KJQ =5.065 KJWhat is the final volume of the gas?Generally, the equation for the Ideal gas law is mathematically given as
PV=nRT
Therefore
V1=2*8.31451*335/(0.58*1.01325*105)
V1=0.09479 m3
Also
V2=V1*(P1/P2)
V2 =0.09479*(0.58/1.44)
V2=0.03818 m3
b)
W=nRTLn(V2/V1)
W=2*8.31451*335*Ln(0.03818/0.09479)
W=-5.065KJ
c)
In conclusion, Heat energy
Q=-W
Q =5.065 KJ
Read more about Energy
https://brainly.com/question/13439286
Without using a micrometer screw gauge, how do I find the average diameter of a long piece of thin wire using a metre rule and a uniform glass rod?
Answer:
Wind the long piece of thin wire around the uniform glass rod multiple times, find the length of the total diameters using the metre ruler, and divide by the number of times you wound it around the rod.
Explanation:
Since the diameter of one long piece of thin wire is too thin to be measured by a metre ruler, you can wind it multiple times and push it side by side to get a length you can measure.
For example, if you wound it around 20 times and the total length of 20 diameters of the wire side-by-side is 2.0 cm, one winding, which is the diameter would be 2.0cm ÷ 20 = 0.10cm or 1mm.
Has the United States always been a country with many formal organizations
Answer:
yes
because they love you
Which characteristic do all of the outer planets have in common?.
Answer:
Composition of hydrogen and helium is common in all outer planets. The inner planets are marked by features such as small size which is of rocks. On other hand, outer planets are characterized by features such as huge size due to composition of hydrogen and helium gases.
Explanation:
Answer:
They are mostly made up of hydrogen and helium.
Explanation:
Which of the following statements is true?
A spark causes combustion in a gasoline engine.
All oxidation reactions cause explosions.
Batteries were invented during the 20th century.
All oxidation reactions absorb heat.
an object from 10.0 meters. She knows it had 50.0 joules of potential energy. How much mass does it have?
Answer:
5N
Explanation:
Work done by a constant force is given by the following equation:
W=F⋅d⋅cos(θ)
where F is the applied force, d is the distance over which the force is applied, and θ is the angle between the force and displacement vectors.
In this case, the work is done by gravity, and as the object is assumed to fall straight down, θ=0^o.
We know that the force of gravity acting on an object can be expressed by FG=mg, and for an object which is not accelerating (e.g. a stationary object), this is equal to the object's weight.
We know d=10m,θ=0^o and W=50J, so we can solve for F to find the object's weight. ⇒F=Wdcos (θ) But cos (0^o)=1, so: F=Wd=50J10m=5N
Adaptations are unique traits developed by organisms to help them survive, thrive, and reproduce in their particular environment. Adaptations may be structural or behavioral. Which of the following is an example of a behavioral adaptation?
A) shallow roots of cacti
B) long neck of a giraffe
C) migration of birds
D) webbed feet of ducks
Answer:
its c - the migration of birds
Explanation:
i did it on study island
what is the force needed to accelerate a grocery sack weighing 212 N upward at 1.7 m/s2
Answer:
36.04N
Explanation:
accelerating force: mass × acceleration
F=ma
m=212/10= 21.2kg
a=1.7m/s2
F=21.2×1.7
=36.04N
a car of mass 800 kg is travelling at 12m/s the car accelerates over a distance of 240 m there force causing this acceleration is 200 newton determine the work done on the car and its final velocity car
Answer:
See below
Explanation:
Force X distance = work
200 N * 240 m = 48 000 N-m = 48 000 j
F = ma
200 = 800 a
a = 1/4 m/s^2
d = v t + 1/2 a t^2
12 m/s t + 1/2 1/4 m/s^2 t^2 = 240
shows t = 17 sec (via Quadratic Formula)
final velocity = 12 + at = 12 + 1/4(17) = 16.26 m/s
a roller coaster of mass 2000kg is rolling down a track with an instantaneous speed of 10m/s
The given is:Mass – 2000 kg
The given is:Mass – 2000 kgInstantaneous speed – 10 meter per second
Step: 1Step: 1K.E= 1/2mv^2
Where, K.E – Kinetic energy in joules:
m – Mass in kg
v – Velocity or speed in meter per second
Step: 2From the give,
m = 2000 kg
v = 10 m/s
Equation (1) becomes,
K.E= 1/2 (2000) (10)^2
= (0.5)(2000)(100)
= 100000
K.E = 100,000 Joules
The kinetic energy is 100,000 Joules, if a roller coaster of mass 2000 kg is rolling down a track with an instantaneous speed 10 m/s.
Which expression emphasizes the understanding that light can act in one of two different ways, depending on the situation?(1 point)
wave-particle duality
photoelectric effect
equal and opposite reasoning
least common denominator
Answer:
wave-particle duality
Explanation:
Answer:
1. How do scientists support claims about different models of light? (Answer: They collect evidence and make sure that the model)
2. In the photoelectric effect, electrons are ejected by matter (Answer: The energy from the waves of light coming from bright lights)
3. Light can be passed through two slits and projected onto a screen. (Answer: The spots are the result of interference, which happens with waves but not particles.)
4. Light travels from the stars to Earth. As light travels, it moves through etc etc... (Answer: This is not something that waves do because they need a medium to travel through)
5. Which expression emphasizeemphasizes the understanding that light can act in one of two (Answer: Wave-particle dualitduality)
6. Which is a statement of reasoning about the two-slit interference experiment? (Answer: When the electromagnetic wave peaks overlap)
--Your Welcome ig--