Answer:
The resultant structure is shown below. This structure contains four shared pairs of electrons, which are located on all four "sides" of carbon's electron dot structure. Each of these shared pairs was created by pairing one of carbon's unpaired electrons with an unpaired electron from chlorine.
Explanation:
determine the number of charged particles in nucleus of calcium atom then deduce the number of electrons
NUCLEAR CHARGE (20+)
ATOMIC MASS (40 amu)
given the relative charge of a proton =1+\ m1nucleon=1amu
Answer:
detail is given below.
Explanation:
The charged particles of nucleus are protons while neutrons are neutral having no charge.
We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus.
Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.
Symbol of proton= P⁺
Symbol of neutron= n⁰
The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons.
one proton contribute 1 amu to the total weight. There are 20 protons and 20 neutrons in Ca thus its atomic mass is 40 amu.
While the atomic number is 20.
What is the name of the following compound: *
PH3
Which statement best compares potential and kinetic energy?
Objects always have more potential energy than kinetic energy.
Kinetic energy increases and potential energy decreases when the velocity of an object increases.
Only potential energy decreases when an object’s height increases.
Objects always have more kinetic energy than potential energy.
Answer:
Its B) Kinetic energy increases and potential energy decreases when the velocity of an object increases.
Explanation:
because i took the test on edge 2020
Taking into account the definition of kinetic, potencial and mechanical energy, the tatement that best compares potential and kinetic energy is: Kinetic energy increases and potential energy decreases when the velocity of an object increases.
Kinetic energyKinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a given mass and at rest, until it reaches a given speed. Once this point is reached, the amount of accumulated kinetic energy will remain the same unless there is a change in speed or the body returns to its state of rest by applying a force.
The kinetic energy is represented by the following expression:
Ec= ½ mv²
Where:
Ec is the kinetic energy, which is measured in Joules (J).m is the mass measured in kilograms (kg). v is the speed measured in meters over seconds (m/s).Potential energyPotential energy is the energy that measures the ability of a system to perform work based on its position.
Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the force of gravity as follow:
Ep= m×g×h
Where:
Ep is the potential energy in joules (J).m is the mass in kilograms (kg).h is the height in meters (m).g is the acceleration of fall in m/s² (approximately 9.81 m/s²).Mechanical energyFinally, mechanical energy is that which a body or a system obtains as a result of the speed of its movement or its specific position, and which is capable of producing mechanical work. Then:
Potential energy + kinetic energy = total mechanical energy
Principle of conservation of mechanical energyThe principle of conservation of mechanical energy indicates that the mechanical energy of a body remains constant when all the forces acting on it are conservative (a force is conservative when the work it does on a body depends only on the initial and final points and not the path taken to get from one to the other.)
Therefore, if the potential energy decreases, the kinetic energy will increase. In the same way, if the kinetics decreases, the potential energy will increase.
Statement best compares potential and kinetic energyTaking into account the definition of kinetic energy, when the velocity of an object increases the kinetic energy increases.
Therefore, considering the principle of conservation of mechanical energy, the potential energy decreases.
So, the correct answer is the second option: Kinetic energy increases and potential energy decreases when the velocity of an object increases.
Learn more about mechanical energy:
brainly.com/question/17809741
brainly.com/question/14567080
brainly.com/question/12784057
brainly.com/question/10188030
brainly.com/question/11962904
PLEASE HELP, ILL GIVE BRAINLIEST
What is the formula for this molecule? *
Answer:
CNH5 i guess...................
Answer:
CNH5 is the formula.
Explanation:
There is 1 carbon molecule, 1 nitrogen molecule, and 5 hydrogen molecule.
Which of the following best describes the velocity of an object?
A B0 m/s
B 30 m east
C 30 m/s east
D 30 m/s2
Answer:
[tex]\boxed {\boxed {\sf C. \ 30 \ m/s \ east}}[/tex]
Explanation:
Velocity is the vector measurement of the change in position over time. A vector measurement means the answer must include a magnitude (numerical value) and a direction.
Here are some units of velocity:
m/s (meters per second) kph (kilometers per hour) km/s (kilometers per second)There are many other units, but m/s is the most common.
We can eliminate choice B and D, because the units (meters-m and meters per second squared-m/s²) are not for velocity.
We are left with choice A (30 m/s) and C (30 m/s east). Remember, velocity needs a number and a direction. C contains the direction east, so it must be the correct answer.
20. Sudan III is used to test for
A. cellulose.
B. fats and oils.
C. glucose.
D. protein.
E. starch.
Answer:
Lipid tests
Sudan III is a red fat-soluble dye that is utilized in the identification of the presence of lipids, triglycerides and lipoproteins. The Reaction: Sudan III reacts with the lipids or triglycerides to stain red in colour.
Answer:
I think soo fats and oils
Explain the electroplating process of an iron key with silver. the materials provided for electroplating is AgNO3 solution, silver rod and iron key.
Answer:
See explanation
Explanation:
The process of electroplating an iron key with silver involves electrolysis.
The anode is a silver rod, the electrolyte is AgNO3 solution while the cathode is the iron key. A battery is connected to provide energy to drive the non-spontaneous electrochemical reaction.
Electrons flow from the anode to the cathode. Silver ions from the silver rod replenishes the silver that is deposited on the iron key in order to continue the electrolytic process.
The silver anode is therefore depleted in mass while the iron key increases in mass.
What are the main functions of the human skeletal system?
A To support the body, protect the organs, produce blood cells, and store calcium.
To regulate the composition of body fluids by removing metabolic wastes and retaining a balance of water, salt, and other
nutrients
OcTo regulate and maintain bodily functions by producing hormones and releasing them into the bloodstream.
D. To enable the diffusion of oxygen into the bloodstream and the removal of carbon dioxide from the bloodstream.
Answer:
The answer is A.........
Answer:
It´s letter A
Explanation:
What is environment?
Answer:
where an organism lives which includes everything that surrounds and influences the organism.
What are the three physical properties of a copper penny?
a. color, reactivity, density
b. color, mass, oxidation
c. color, reactivity, mass
d. color, mass, shape
SOMEONE HELP ME PLEASE!!! ILL GIVE BRAINLY
Physical properties behave identically for all matter under the same conditions.
Physical properties cause atoms and molecules to change structure when substances are mixed.
Physical properties can be observed without changing the identity of a substance.
Physical properties are observed by seeing how a substance reacts with other substances.
Answer:
the answer is c
Explanation:
My reasoning is that its most likely
What helps your heart beat? Will give brainlist to whoever answers first!!
Answer:
running helps my heart beat
Answer:
Exercise: The easiest and most effective way to achieve a lasting lower heart rate is to do regular exercise. 2. Stay hydrated: When the body is dehydrated, the heart has to work harder to stabilize blood flow. Throughout the day, drink plenty of sugar- and caffeine-free beverages, such as water and herbal tea.
Compare the atomic radii of neutral atoms 7N,8O,11Na and 12Mg and expalin briefly
Are scientist improving the plant or corrupting it
Answer:
46 percent of trees have been cut down.
Scienctists helps plants, but humans do destroy a lot of plants.
Scientists - helps increase plant growth.
Woodchoppers - helps decrease plant growth.
What is the molecular formula of the compound with a molecular weight of 112 g/mol and percent composition: 85.6% C and 14.4% H?
Select one:
a. C2H4
b. CH2
c. C4H8
d. C8H16
Answer:
Molecular formula = C₈H₁₆
Explanation:
Given data:
Percentage of hydrogen = 14.4%
Percentage of carbon = 85.6%
Molecular formula = ?
Molecular weight = 112 g/mol
Solution:
Number of gram atoms of H = 14.4/ 1.01 = 14.26
Number of gram atoms of C = 85.6/ 12 = 7.13
Atomic ratio:
C : H
7.13/7.13 : 14.26/7.13
1 : 2
C : H = 1 : 2
Empirical formula is CH₂
Molecular formula:
Molecular formula = n (empirical formula)
n = molar mass of compound / empirical formula mass
n = 112 / 14
n = 8
Molecular formula = n (empirical formula)
Molecular formula = 8 (CH₂)
Molecular formula = C₈H₁₆
Which has more energy, 5 kilograms of dynamite or 10 kilograms of dynamite? Why?
Answer: The main purpose of any warhead is to inflict damage on the target. The way the damage is caused may vary with different types of warheads, but in the most general sense, damage is caused by the transfer of energy from the warhead to the target. The energy is typically mechanical in nature and takes the form of a shock wave or the kinetic energy of fragments. In either case, a large amount of energy must be released. For many warheads that energy is stored in the form of chemical explosives.
Explosive Reactions
There are many chemical reactions that will release energy. These are known as exothermic reactions. If the reaction proceeds slowly, the released energy will be dissipated and there will be few noticeable effects other than an increase in temperature. On the other hand, if the reaction proceeds very rapidly, then the energy will not be dissipated. Thus, a great quantity of energy can be deposited into a relatively small volume, then manifest itself by a rapid expansion of hot gases, which in turn can create a shock wave or propel fragments outwards at high speed. Chemical explosions may be distinguished from other exothermic reactions by the extreme rapidity of their reactions. In addition to the violent release of energy, chemical explosions must provide a means to transfer the energy into mechanical work. This is accomplished by expanding product gases from the reaction. If no gases are produced, then the energy will remain in the products as heat.
Most chemical explosions involve a limited set of simple reactions, all of which involve oxidation (reaction with oxygen). A relatively easy way to balance chemical explosive equations is to assume that the following partial reactions take place to their maximum extent (meaning one of the reactants is totally consumed) and in order of precedence:
Explanation:
Answer:
10 kilograms of dynamite
Explanation:
The more volume an object has the more potential energy is available if it is the same material. 10 kilograms is larger than 5 kilograms.
Ahhh helpppp:))))))))))
Answer:
HKOB
Explanation:
hope it helps
Which of the following correctly compares glass A and glass B?
A black line splitting the image into two parts. On the left hand side is glass A that is almost full. On the right side is glass B that is half full.
Question 13 options:
Glass A has the same mass as glass B.
Glass A has a greater mass than glass B.
Glass A has the same amount of liquid as glass B.
The liquid in both glasses takes up the same space.
Answer:
Glass A has a greater mass than glass B
Answer:
Glass A has a greater mass than Glass B
hope this helped :>
A small windmill is to be built at a science competition. A large floor fan is used to power each windmill The task
is to lift a bucket filled with the most number of pennies possible from a height of one meter in one minute.
Which change in decision would most likely increase the weight that the windmill could lift?
A)
Make the fan blades smaller.
B)
Make the arms of the windmill longer,
C)
Make the arms of the windmill shorter
D)
Make the fan blades out of a lighter material.
Answer:
D
Explanation:
I'm doing USA test prep and I got it right
Answer:
Explanation:
It is D
Make the fan blades out of a lighter material.
The item that is not normally used in preparing
a slide is
A. medicine dropper
B. scissors
C. slip cover
D vereis
Answer:
What is the name of the lab tool that is used to transfer a sample to a microscope slide?
A-a dropper
B-forceps
C-scissors
D-a ruler
Explanation:
got it wrong but this is the answer edg 2021
In the preparation of a microscopic slide, the items which are used are medicine dropper, scissors, and a slip cover. Thus, the correct option is D.
What is a microscopic slide?Microscope slides are made for the purpose of observations of different objects. After the observation, the slides are discarded. In most cases, the slides use a liquid mounting medium such as water or glycerin.
The procedure for the preparation of the slide is as follows:
1. Place a drop of liquid mounting medium in the center of the slide.
2. Position the sample on liquid with the use of tweezers.
3. At an angle, place one side of the cover slip against the microscopic slide making contact with outer edge of the liquid drop.
4. Lower the cover slip slowly, avoiding air bubbles.
5. Remove the excess water present in it with the help of paper towel.
Therefore, the correct option is D.
Learn more about Slide here:
https://brainly.com/question/20777311
#SPJ2
(?)Fe+(?)H20 - - -> (?)Fe3O4+(?)H2
Answer:
what is this question??
Convert 76.8 cm to m.
Answer:
0.768 m
Explanation:
1 cm = 0.01 m
76.8 cm * 0.01 m/ 1 cm
0.768 m
Can someone tell me how to identify the number of significant figures?
I solved a molarity word problem and I got the answer 1.138 moles. I need to find the number of significant figures for this number. If you could use 1.138 as an example, that'd be great.
Answer:
Non-zero digits are always significant.
Any zeros between two significant digits are significant.
A final zero or trailing zeros in the decimal portion ONLY are significant. If a number ends in zeros to the right of the decimal point, those zeros are significant.
Explanation:
1.138 has 4 significant figures, which are 1, 1, 3 and 8. The numbers after the decimal point are decimals and are significant figures.
Ratan started business with cash Rs 50000
Answer:
what's the question here then ?????
Explanation:
nepal ????
How much silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate?
Answer:
Calculate the mass of silver phosphate produced if 30.0 grams of silver acetate completely reacts with sodium phosphate.
According to stoichiometry of the balanced chemical reaction between silver phosphate and silver acetate 8.359 g silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.In the given reaction 500.73 g of silver acetate produces 418.58 g silver phosphate, thus 10 g silver acetate is produced when 10×418.58/500.73 =8.359 g.
Thus, 8.359 g silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ2
Which of the following may indicate that a chemical reaction has occurred?
a. release of energy as light
b. a color change
C. gas bubble formation
d. All of the above
Answer:
D, all of the above
Explanation:
Use the periodic table to identify the number of valence electrons available for bonding for each of the following elements.
Answer: Edgy, 2020
Explanation: <3
Answer:
refer to picture below :)
Explanation:
Which increases along faults and leads to rock breaking? damage earthquake focus stress
A. damage
B. earthquake
C. focus
D. stress
Answer:
Stress
Explanation:
Stress increases along faults and leads to rock breaking. Therefore option D is correct.
Along faults, stress builds up in the rocks due to the movement and interaction of tectonic plates. Stress is the force applied to the rocks, and it can occur in various forms, such as compression, tension, or shear. As the stress increases, the rocks become more strained and are pushed to their breaking point.
When the stress exceeds the strength of the rocks, they can no longer withstand the applied forces and break, resulting in an earthquake. The release of accumulated stress along the fault causes the rocks to rupture and generate seismic waves, leading to ground shaking and the propagation of energy throughout the Earth's crust.
Therefore, stress is the primary factor that increases along faults and ultimately leads to rock breaking and the occurrence of earthquakes.
Know more about tectonic plates:
https://brainly.com/question/16926233
#SPJ2
which element has 4 energy levels and 7 valence electrons
Answer:
Beryllium 4 2
Boron 5 3
Carbon 6 4
Nitrogen 7 5
The most concentrated solution from among those listed is