The electric potential, which is a scalar field, may be represented graphically by equipotential curves. The lines of electric field may be obtained from those equipotentials.

Four rectangles have been placed on the graph below. Assess the region of the graph where the magnitude of the electric field is greatest. Drag the label Emax to the rectangle in that region. Assess the region of the graph where the magnitude of the electric field is smallest. Drag the label Emin to the rectangle in that region.

Answer: 20 m/s

Explanation:

Acceleration = change in velocity / time → 10 m/s^2 = final velocity - 0 (original velocity) / 2s → final velocity = 20 m/s

Based on the data provided, the value of the constant b is 3.27 × 10^-5 kg/s and the time required to reach 63% of terminal velocity is 0.58 s.

The terminal velocity of a body is the velocity at which the body falls at constant velocity through a fluid.

For the falling raindrop, let positive direction be downwards and negative direction upwards,

The raindrop experiences a downward gravitational force mg, and an upward drag force -bv.

The total force at a time t is given as

a)

Terminal velocity is achieved then the total force is 0,

0 = mg - bv0

Therefore

b = mg/v0

Substitutingthe values:

b = (3 × 10^-5 × 9.8)/9

b = 3.27 × 10^-5 kg/s

b) Applying Newton's Second Law

F = ma

where

Therefore,

mg = mv/t t = v/g

however, t is at 63% velocity

thus:

t = 0.63v/g

t = 0.63 × 9 /9.8

t = 0.58 s

Therefore, the value of the constant b is 3.27 × 10^-5 kg/s and the time required to reach 63% of terminal velocity is 0.58 s

Learn more about terminal velocity at: https://brainly.com/question/12903433

The miniature circuit breaker should rather be fastned to a wall using nails and other neccessary tools.

A miniature circuit breaker is a circuit breaker that is used in homes as a means of guarding against damage to appliances due to a very high current.

This miniature circuit breaker is also harzardous in the sense that it could lead to an electrical fault related fire outbreak especially when it is being blown freely by wind as you tie it with a thread. Doing this a very bad idea because of the risk of a fire hazard.

The miniature circuit breaker should rather be fastned to a wall using nails and other neccessary tools.

Learn more about miniature circuit breaker: https://brainly.com/question/1298425

Answer:

Explanation:

Use that:

[tex]F=-\vec{\nabla}U(x,y)=-\left(\hat{i} \frac{\partial U}{\partial x}+\hat{j}\frac{\partial U}{\partial y}\right)=-11.6x\hat{i}+10.8y^{2}\hat{j}[/tex]

Then use the 2nd Newton's Law of Motion:

[tex]\vec{a}=\frac{\vec{F}}{m}=\frac{-11.6x\hat{i}+10.8y^{2}\hat{j}}{0.04}=-290x\hat{i}+270y^{2}\hat{j}[/tex]

At x = 0.3 and y = 0.6, we can find the acceleration as:

[tex]\vec{a}=-87\hat{i}+97.2\hat{j}[/tex] (in SI unit)

Then the magnitude of the acceleration on that point is:

[tex]a=\sqrt{(-87)^{2}+(97.2)^{2}}\approx 130.44[/tex] (SI Unit)

Answer:

m = 4.5 kg

Explanation:

w = - 1800 j

Fd = - 1800 j

mgd = - 1800 j

m = - 1800 ÷(gd)

m = - 1800 ÷( 10×-40)

m = 4.5 kg

Answer:25

Explanation: because higher means less kinetic energ

The volume of the material that must be used to make a star with the mass of the sun is 1.2×10⁵¹ m³.

Volume is the amount of space occupied by an object or a plane figure.

To calculate the volume of the material that must be used to make a star with the mass of the sun, we use the formula below.

Formula:

Where:

Make V the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, The volume of the material that must be used to make a star with the mass of the sun is 1.2×10⁵¹ m³.

Learn more about volume here: https://brainly.com/question/1972490

Answer:

1.     121.05 kg m/s NW

2.     94.5 kg m/s NW

3.     26.55 kg m/s NW

Explanation:

Answer:

Fundamental quantities are quantities that were created to measure a object/substance which are the basis on which derived quantities are formed, where as derived quantities are created by extracting variables from the fundamental quantities.

Answer:

the process of bending of light when travling throw different mediume is called refraction of light.

Answer:

did you get it done if not lmk I will help you out tomorrow when I get up

Alpha

I hope this helps you

:)

Answer:

a

Explanation:

Distance is simply the distance travelled which in this case would be 4km + 3km = 7km

To work out displacement, try to imagine the situation.

Draw a straight line to the east (label it 3) and then draw another line from the end of the first line upwards (label this one 4). Thus, you've created a right angles triangle. Now use pythagorean theorem to work out the displacement

4^2 + 3^2 = 25

sqrt 25 = 5 = displacement

[tex] \tt{Difference \: Between \: \underline\red {Horticulture} \: And \: \underline\green{Agriculture}}[/tex]

[tex] \text{\underline\red {Horticulture}}[/tex]

The Cultivation of Fruits, Vegetables and Flowers for domestic and international markets are called Horticulture.

[tex] \text{\underline\green{Agriculture}}[/tex]

It is science, art and occupation of cultivating the soil, producing crops and livestock. It is systematic and controlled use of living organisms and the environment to improve the human condition.

Answer:

In a series circuit, the same amount of current flows through all the components placed in it. On the other hand, in parallel circuits, the components are placed in parallel with each other due to which the circuit splits the current flow.

The magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].

The magnitude of the force each plate experiences due to the other plate is determined as follows;

F = U/d

where;

[tex]F = \frac{1}{2} \frac{Q^2}{C} \times \frac{1}{d} \\\\[/tex]

Q = CV

[tex]F = \frac{1}{2} \frac{C^2V^2}{C d} = \frac{CV^2}{2d}[/tex]

where;

The capacitance is given as;

[tex]C = \frac{\varepsilon _o A }{d}[/tex]

[tex]F = \frac{\varepsilon _o A }{d} \times \frac{V^2}{2d} \\\\F = \frac{V^2 A \varepsilon _o }{2d^2}[/tex]

Thus, the magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].

Learn more about capacitance of parallel plate capacitors here: https://brainly.com/question/13578522

Answer:

thats is so hard

Explanation:

i cant answer that

Answer:

Burning coal and boiling water are both chemical changes. Burning coal is a chemical change, and boiling water is a physical change. Burning coal is a physical change, and boiling water is a chemical change.

Explanation:

Answer:

(A) 0.8 kgm/s

Explanation:

because of the even ground it would only slow down

Answer:

I can only define a few of them, hope you don't mind.

Seismic- It means connected with or caused by earthquakes

Epicenter- It means the point on the earth's surface where the effects of an earthquake are most felt strongly.

Fault- A place where there is a break that is longer than usual in the layers of rock in the earth's crust.

Tectonic waves- Waves connected with the structure of the earth's surface.

Plate boundaries- The boundaries that differentiates the large sheets of rock (called PLATES) that form the earth's surface. Plate tectonics is the movement of the large sheets of rocks that form the earth's surface

[tex] \: \: \: \: \: \: \: \: \: [/tex]

Since there is no temperature change which drives heat flow, thus no heat will be released by the water.

The heat released by the water when it freezes is calculated as follows;

Q = mcΔФ

where;

when water freezes, the temperature, Фf = 0 °C

Q = 82 x 4200 x (0 - 0)

Q = 0

Since there is no temperature change which drives heat flow, thus no heat will be released by the water.

Learn more about heat flow here: https://brainly.com/question/14437874

Answer:

300N

Explanation:

in your drawing make sure to put 230n and 160n on the same side with arrows facing the same direction on the opposite side of the box add an arrow with 0n and an arrow to represent friction

As a conservation biologist for the Chesapeake Bay, you and your

colleagues have been conducting a research study that tracks the decrease

in the bald eagle population over the past few years.

What evidence can you find for the decrease in the bald eagle population?

Answer:

Speed of the ball when it was thrown = 16.67 m/s

Height reached by the ball = 14.16 s

Explanation:

Given time in the ball comes to the same height from where the ball was thrown is 3.4 s.

Let us assume that the ball was thrown with a speed of u in the upward direction. Since only gravitational force acts on the particle in the downward direction, it has a constant acceleration in the downward direction.

We also know that a particle has the same magnitude of velocity when it is under a free fall at a fixed height but direction is opposite i.e., initially in the upward direction and finally in the downward direction.

https://tex.z-dn.net/?f=%5Ctherefore%20%5Cdfrac%7B-u-u%7D%7B3.4%7D%3D%20-9.8%5C%5C%5CRightarrow%20%5Cdfrac%7B2u%7D%7B3.4%7D%3D%209.8%5C%5C%5CRightarrow%202u%20%3D%209.8%5Ctimes%203.4%5C%5C%5CRightarrow%20u%20%3D%20%5Cdfrac%7B9.8%5Ctimes%203.4%7D%7B2%7D%5C%5C%5CRightarrow%20u%20%3D%2016.67%5C%20m%2Fs

Hence, the particle was thrown with a speed of 16.67 m/s.

Now, we also note that the particle has zero velocity at its maximum height.

So, from the initial position to the maximum height reached by the particle, we have

https://tex.z-dn.net/?f=0%5E2%20%3D%20u%5E2%2B2as%5C%5C%5CRightarrow%20s%20%3D%20%5Cdfrac%7Bv%5E2-u%5E2%7D%7B2a%7D%5C%5C%5CRightarrow%20s%20%3D%20%5Cdfrac%7B0%5E2-16.67%5E2%7D%7B2(-9.8)%7D%5C%5C%5CRightarrow%20s%20%3D14.16%5C%20m

Hence, the maximum height reached by the ball is 14.16 m.

Answer:

maybe line toward the finish

Explanation:that question is confusing

Velocity is the pace at which your displacement is shifting; it describes how quickly and in which direction you are travelling. And acceleration, which is measured in meters per second, is the rate at which your velocity is changing (or meters per second squared).

Net force and mass are the two primary factors that impact how quickly an item accelerates. For instance, mass has an inverse relationship with acceleration while net force has a direct relationship.

The acceleration is also influenced by other elements like friction, air or fluid resistance, and pressure.

According to the second law, the mass of the item and the net force acting on it both impact how quickly an object accelerates.

Therefore, an object's acceleration is directly proportional to the net force applied on it and inversely proportional to its mass.

Learn more about acceleration and velocity here:

https://brainly.com/question/7642897

#SPJ2

[tex]\qquad\qquad\huge\underline{{\sf Answer}}♨[/tex]

Heat capacity of body 1 :

[tex]\qquad \sf  \dashrightarrow \:m_1s_1[/tex]

Heat capacity of body 2 :

[tex]\qquad \sf  \dashrightarrow \:m_2s_2[/tex]

it's given that, the the head capacities of both the objects are equal. I.e

[tex]\qquad \sf  \dashrightarrow \:m_1s_1 = m_2s_2[/tex]

[tex]\qquad \sf  \dashrightarrow \:m_1 = \dfrac{m_2s_2}{s_1} [/tex]

Now, consider specific heat of composite body be s'

According to given relation :

[tex]\qquad \sf  \dashrightarrow \:(m_1 + m_2) s' = m_1s_1 + m_2s_2[/tex]

[tex]\qquad \sf  \dashrightarrow \:s' = \dfrac{ m_1s_1 + m_2s_2}{m_1 + m_2}[/tex]

[tex]\qquad \sf  \dashrightarrow \:s' = \dfrac{ m_2s_2+ m_2s_2}{ \frac{m_2s_2}{s_1} + m_2 }[/tex]

[ since, [tex] m_2s_2 = m_1s_1 [/tex] ]

[tex]\qquad \sf  \dashrightarrow \:s' = \dfrac{ 2m_2s_2}{ m_2(\frac{s_2}{s_1} + 1)}[/tex]

[tex]\qquad \sf  \dashrightarrow \:s' = \dfrac{ 2 \cancel{m_2}s_2}{ \cancel{m_2}(\frac{s_2}{s_1} + 1)}[/tex]

[tex]\qquad \sf  \dashrightarrow \:s' = \dfrac{ 2 s_2}{ (\frac{s_2 + s_1}{s_1} )}[/tex]

[tex]\qquad \sf  \dashrightarrow \: s' = \dfrac{2s_1s_2}{s_1 + s_2} [/tex]

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Try this solution, all the details are in the attachment. note, the answer is marked with orange colour. If it is possible, check the provided solution in other sources.

Answer: ≈0.81c.