The maximum cargo load of the Goodyear blimp is 2568.8 kg when flying at a sea-level location with an air temperature of 20°C.
To solve this problem, we need to use Archimedes' principle, which states that the buoyant force on an object is equal to the weight of the fluid displaced by the object. In this case, the fluid is air, and the buoyant force on the blimp is equal to the weight of the air displaced by the blimp.
First, we need to calculate the weight of the blimp, which is equal to the sum of the envelope and gondola:
Weight of blimp = 4300 kg
Next, we need to calculate the weight of the air displaced by the blimp. We can use the density of air at 20°C, which is approximately 1.204 kg/m³:
Volume of blimp = 5700 m³
Weight of air displaced = Volume of blimp x Density of air = 5700 x 1.204 = 6868.8 kg
Finally, we can calculate the maximum cargo load by subtracting the weight of the blimp from the weight of the air displaced:
Maximum cargo load = Weight of air displaced - Weight of blimp = 6868.8 - 4300 = 2568.8 kg
To know more about helium balloon, here
brainly.com/question/12666223
#SPJ1
Question 2 of 25
You burn a log on a fire. You use the fire to warm yourself and to help you see
to read a book. What energy transformation is taking place?
OA. Nuclear energy is transformed to light energy and heat energy.
OB. Chemical energy is transformed to nuclear energy and heat
energy.
O C. Nuclear energy is transformed to light energy and chemical
energy.
D. Chemical energy is transformed to light energy and heat energy.
SUBMIT
Answer: D. Chemical energy is transformed into light energy and heat energy.
Explanation: In the process of burning, chemical energy is transformed into light and heat energy.
The stored chemical energy in the wood is converted into heat and light energy during the process of burning. Wood is composed mainly of carbon. The reaction between carbon and oxygen yields a large amount of energy in the form of heat and light along with carbon dioxide.
To know more about the combustion of wood
https://brainly.com/question/12751068?referrer=searchResults
Which statement about electric charges is correct?
(A) An object with a positive charge and an object with a negative charge will repel each other.
(B) An object with a negative charge and an object with a positive charge will attract each other.
(C) Two objects with negative charges will attract each other.
(D) Two objects with positive charges will attract each other.
A liquid rocket engine has an average chamber pressure, Pc = 10 MPa, measured during a test, and a throat area, At = 0. 175 m2. For the test, the average value of thrust measured was 2000 kN, and 100,000 kg of propellant was expended in a test that was run at constant mass flow rate in 120 sec. Determine the average values of CF, c* and specific impulse for this engine. (90 points)
The average values of CF, c*, and specific impulse for this engine are 10.857, 4441.62 m/s, and 240.8 sec, respectively.
Thrust = mass flow rate * exhaust velocity
where the mass flow rate is given by:
mass flow rate = propellant expended / burn time
and the exhaust velocity is given by:
exhaust velocity = c* * √(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]
We can first calculate the mass flow rate:
mass flow rate = 100,000 kg / 120 sec = 833.33 kg/sec
Pc / p = 10 MPa / 101.325 kPa = 98.68
Then, we can calculate the exhaust velocity:
exhaust velocity = c* * sqrt(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]
c* = exhaust velocity / sqrt(2 * (k / (k-1)) * ((Pc / p) [tex]^ ((k-1) / k) - 1))[/tex]
Using this, we get:
exhaust velocity = 2573.78 m/s
c* = 2573.78 m/s / √(2 * (1.2 / 0.2) * ((98.68) [tex]^ ((0.2-1.2) / 1.2) - 1))[/tex] = 4441.62 m/s
Now, we can calculate the thrust coefficient:
CF = Thrust / (Pc * At)
CF = 2000 kN / (10 MPa * 0.175 m²) = 10.857
Finally, we can calculate the specific impulse:
specific impulse = thrust / (mass flow rate * g0)
where g0 is the standard acceleration due to gravity (9.81 m/s²)
specific impulse = 2000 kN / (833.33 kg/s * 9.81 m/s²) = 240.8 sec
In physics, an impulse is a force applied to an object for a very short amount of time. It is calculated as the product of the force and the duration of time over which it is applied. Impulse can cause a change in an object's momentum, which is the product of an object's mass and velocity. According to Newton's second law, force is directly proportional to the rate of change in momentum, so a larger impulse will cause a greater change in momentum.
The concept of impulse is particularly useful in understanding collisions and other situations where forces act over a short time period. In these cases, the impulse can be used to calculate the change in an object's momentum, and from there, its new velocity and direction of motion. Overall, the impulse is an important concept in physics that helps us to understand the behavior of objects in motion and the effects of forces on their momentum.
To learn more about Impulse visit here:
brainly.com/question/30466819
#SPJ4
One kg of a soil was sieved through a set of 8 sieves with the size 4. 75 mm, 2. 0 mm, 600µ, 425µ, 300µ, 212µ, 150µ and 75µ. The weight of soil retained on these sieves was found to be 50, 78, 90, 150, 160, 132, 148 and 179 gm respectively. Draw a particle size distribution curve and determine the uniformity coefficient and coefficient of curvature
The uniformity coefficient is 3.89 and the coefficient of curvature is 1.12.
The total weight of soil retained on all the sieves is 987 grams (50+78+90+150+160+132+148+179). So, the percentage of soil retained on each sieve is:
Sieve size 4.75 mm: 5.07%
Sieve size 2.0 mm: 7.89%
Sieve size 600 µm: 9.12%
Sieve size 425 µm: 15.20%
Sieve size 300 µm: 16.22%
Sieve size 212 µm: 13.38%
Sieve size 150 µm: 14.98%
Sieve size 75 µm: 18.14%
Uniformity coefficient = D60/D10 = 350/90 = 3.89
Coefficient of curvature = (D30)²/(D10 x D60) = (212²)/(90 x 350) = 1.12
A sieve is a material with a porous structure that is used to separate particles of different sizes. It can be made of various materials such as mesh, cloth, or paper. The process of separating particles using a sieve is called sieving or screening.
Sieves are commonly used in the laboratory to separate solid particles from a mixture based on their particle size. This is useful in many applications, such as isolating small particles for analysis or separating larger particles for use in a particular experiment. Sieves can also be used in the industry for sorting materials based on size, such as in the food and pharmaceutical industries. The size of the sieve used determines the size of the particles that can pass through it. The sieve size is typically measured in micrometers or millimeters. The finer the sieve, the smaller the particles that can pass through it.
To learn more about Sieve visit here:
brainly.com/question/13663054
#SPJ4
One cloud carries a charge of − 1. 0 C −1. 0Cminus, 1, point, 0, start text, C, end text and another cloud carries a charge of 5. 0 C 5. 0C5, point, 0, start text, C, end text. The two clouds are 1. 5 × 1 0 3 m 1. 5×10 3 m1, point, 5, times, 10, cubed, start text, m, end text apart. Calculate the magnitude of the force between these two charged objects. Write your answer in scientific notation using two significant figures.
We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.
There are 1.5 x 103 metres between two clouds. The difference in charge between two clouds is 1.0 C for one and 5.0 C for the other. We can utilise Coulomb's law, which takes into account both the distance between the charges and the strength of their charges, to determine the force between them.
The equation provides us with an attraction or repelling force between the charges. In this instance, the result is a -0.15 N attractive force. As a result, the two clouds would be attracted to one another.
We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.
Learn more about force:
https://brainly.com/question/26115859
#SPJ4
the surface temperature of a nearby star can best be determined from spectral classification by examining the
Spectral classification is a system that categorizes stars based on their spectral characteristics, specifically the absorption lines in their spectra. These lines are the result of various elements and compounds present in the star's outer layers absorbing specific wavelengths of light.
By examining a star's spectrum, we can identify its temperature, as well as other properties such as chemical composition and luminosity.
The primary classification system used by astronomers is the Harvard Spectral Classification, which organizes stars into seven main classes: O, B, A, F, G, K, and M. These classes are ordered by descending surface temperature, with O being the hottest and M being the coolest. Each class is further divided into subcategories numbered from 0 to 9, which also indicate temperature variations within the class.
To determine the surface temperature of a nearby star, astronomers examine its spectrum and identify the absorption lines corresponding to specific elements. The strength and position of these lines can reveal the star's temperature. For example, a star with strong hydrogen lines would be classified as an A-type star, which has a surface temperature of about 7,500 to 10,000 Kelvin.
In conclusion, the surface temperature of a nearby star can best be determined from spectral classification by examining the absorption lines in its spectrum. By identifying the star's spectral class and subtype, astronomers can infer its surface temperature with relative accuracy. This method plays a crucial role in understanding the properties and evolution of stars in our universe.
For more such questions on Spectral classification.
https://brainly.com/question/29844967#
#SPJ11
Complete Question:
The surface temperature of a nearby star can best be determined from spectral classification by examining?
What marks the boundary between the inside and outside of a black hole?
The event horizon is the boundary between the inside and outside of a black hole, beyond which not even light can escape the gravitational pull.
The boundary between the inside and outside of a black hole is known as the event horizon. It is the point of no return beyond which not even light can escape the gravitational pull of the black hole. The event horizon is determined by the black hole's mass and spin, and its size is directly proportional to these factors. Once an object or even light crosses the event horizon, it is pulled inexorably towards the singularity at the center of the black hole, a point where the laws of physics as we know them break down.
Learn more about black hole here:
https://brainly.com/question/29508643
#SPJ11
The battery is the same as in circuit 7. The bulbs are all identical and are the same as the bulbs used in circuit 7. During the experiment, you did the same things as before: you adjusted the length of the rheostat L7 so that 1 glow again flowed through bulb H. As before, l'll assume that a current of 30 mA corresponds to 1 glow as the through bulb H If the resistance of rheostat L7 has been adjusted so that 30 mA flows through bulb H then what current flows through bulb B? What current flows through bulb D? If the resistance of rheostat L7 has been adjusted so that 330 mA flows through bulb H then what current flows out of the battery?
If rheostat L7's resistance is adjusted so that 30 mA flows through bulb H, the current flowing through bulbs B and D is similarly 30 mA.
If rheostat L7's resistance is adjusted so that 330 mA passes through bulb H, the current coming out of the battery is also 330 mA.
Because all bulbs are identical, they have the same resistance, and thus when they are connected in parallel, the same current passes through each of them. When 30 mA flows via bulb H, the same current travels through rheostat L7, as well as bulbs B and D, because they are all connected in parallel. As a result, the current flowing through bulbs B and D is similarly 30 mA.
When the resistance of rheostat L7 is adjusted to allow 330 mA to flow through bulb H, the current flowing out of the battery must likewise be 330 mA, because the current coming into the circuit must equal the current flowing out of the circuit (according to the principle of charge conservation).
Because the bulbs are still linked in parallel, the current flowing through each of them remains constant, and therefore the current flowing through bulb B, bulb D, and rheostat L7 is 330 mA.
learn more about Resistance here:
https://brainly.com/question/30669051
#SPJ4
a device consists of eight balls each of mass 0.6 kg attached to the ends of low-mass spokes of length 1.4 m, so the radius of rotation of the balls is 0.7 m. the device is mounted in the vertical plane. the axle is held up by supports that are not shown, and the wheel is free to rotate on the nearly frictionless axle. a lump of clay with mass 0.20 kg falls and sticks to one of the balls at the location shown, when the spoke attached to that ball is at 45 degrees to the horizontal. just before the impact the clay has a speed 7 m/s, and the wheel is rotating counterclockwise with angular speed 0.24 radians/s.
Answer:
First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:
L1 = Iω1
where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.
The moment of inertia of the wheel can be calculated using the formula:
I = Σmr^2
where Σmr^2 is the sum of the products of the mass of each ball (m) and the square of its distance from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:
I = 8m(0.7)^2 = 3.136m
where m is the mass of each ball.
Substituting the given values, we get:
I = 8(0.6)(0.7)^2 = 1.176 kg·m^2
The initial angular velocity is ω1 = 0.24 rad/s. Therefore:
L1 = Iω1 = (1.176 kg·m^2)(0.24 rad/s) = 0.28224 kg·m^2/s
When the clay hits the ball, it sticks to it, and the ball starts to rotate with the same angular velocity as the wheel. Let ω2 be the final angular velocity of the system after the collision. Then the final angular momentum of the system is:
L2 = Iω2 + mvR
where m is the mass of the clay, v is its velocity just before the collision, and R is the distance of the point of impact from the center of the wheel.
Substituting the given values, we get:
L2 = (1.176 kg·m^2)ω2 + (0.20 kg)(7 m/s)(0.7 m)
L2 = 1.176ω2 + 0.588 kg·m^2/s
Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:
ω2 = (L1 - 0.588 kg·m^2/s) / 1.176 kg·m^2
ω2 = (0.28224 kg·m^2/s - 0.588 kg·m^2/s) / 1.176 kg·m^2
ω2 = -0.2214 rad/s
The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.
Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:
K1 = (1/2)Iω1^2
Substituting the given values, we get:
K1 = (1/2)(1.176 kg·m^2)(0.24 rad/s)^2 = 0.03372 J
The final kinetic energy is:
K2 = (1/2)Iω2^2
Substituting the calculated value of ω2, we get:
K2 = (1/2)(1.176 kg·m^2)(0.2214 rad/s)^2 = 0.01408 J
Therefore, the new kinetic energy of the system after the collision is 0.01408 J.
Therefore, the new kinetic energy of the system after the collision is 0.01408 J.
First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:
L1 = Iω1
where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.
The moment of inertia of the wheel can be calculated using the formula:
I =
where Σ[tex]mr^2[/tex] is the sum of the products of the mass of each ball (m) and the square of its from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:
I = [tex]8m(0.7)^2[/tex] = 3.136m
where m is the mass of each ball.
Substituting the given values, we get:
I = [tex]8(0.6)(0.7)^2 = 1.176 kg * m^2[/tex]
The initial angular velocity is ω1 = 0.24 rad/s. Therefore:
Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:
[tex]w2 = (L1 - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = (0.28224 kgm^2/s - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = -0.2214 rad/s[/tex]
The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.
Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:
K2 = [tex](1/2)Iw_2^2[/tex]
Substituting the calculated value of ω2, we get:
K2 = [tex](1/2)(1.176 kgm^2)(0.2214 rad/s)^2 \\= 0.01408 J[/tex]
Learn more about kinetic energy Visit: brainly.com/question/8101588
#SPJ4
If you have a 500 watt lightbulb and the wall socket provides 120 Volts, what is the current? Explain.
Answer: To calculate the current, we can use the formula I = P/V, where I is the current, P is the power, and V is the voltage.
For a 500 watt lightbulb and a 120 volt wall socket, the current would be:
I = P/V
I = 500/120
I = 4.17 amps
Therefore, the current would be 4.17 amps.
This formula is derived from Ohm's law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them. In this case, the resistance of the lightbulb is not given, but we can assume that it is constant. By knowing the power and voltage, we can use the formula to calculate the current.
Explanation:
a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s
The amplitude of the motion is approximately 0.290 m.We find using conservation of energy principle.
Using the conservation of energy principle, we can find the amplitude of the motion of a 2.00 kg frictionless block attached to an ideal spring with force constant 365 N/m that is undergoing simple harmonic motion. Given that the block has a displacement of 0.200 m and is moving in the negative x direction with a speed of 5.00 m/s, we can calculate the amplitude using the formula:
A = v / sqrt(k/m)
where A is the amplitude, v is the maximum velocity of the block, k is the spring constant, and m is the mass of the block. Plugging in the given values, we get:
A = 5.00 m/s / sqrt(365 N/m / 2.00 kg)
Simplifying this expression, we get:
A ≈ 0.290 m
Learn more about conservation of energy here:
https://brainly.com/question/2137260
#SPJ11
The complete question is :
a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s Find the amplitude of the motion.
Question 4
All of the following are considered ionizing radiation except:
a. Gamma rays
b. Ultraviolet light
c. x-rays
d. beta particles
Ultraviolet light is not considered ionizing radiation(B).
Ionizing radiation refers to radiation with enough energy to ionize atoms, meaning it can knock electrons out of their orbitals and create ions. Gamma rays, X-rays, and beta particles are all examples of ionizing radiation because they have enough energy to cause ionization.
Ultraviolet light, on the other hand, has lower energy and is not capable of ionizing atoms. While UV light can cause damage to living cells and DNA, it does so through a different mechanism than ionizing radiation. B) UV light is still classified as a type of radiation, but it is considered non-ionizing.
For more questions like Light click the link below:
https://brainly.com/question/10709323
#SPJ11
the range of temperatures in the kelvin (absolute) scale between the freezing point and boiling point of water is
The range of temperatures in the Kelvin scale between the freezing point and boiling point of water is 100 K.
The Kelvin scale, also known as the absolute temperature scale, was developed by William Thomson, also known as Lord Kelvin, in 1848. It's designed to have an absolute zero, which is the lowest possible temperature in the universe, and is equivalent to -273.15°C.
In the Kelvin scale, the freezing point of water is set at 273.15 K, while the boiling point is 373.15 K. This range of temperatures is essential to understanding and measuring various physical and chemical processes. For instance, it can help determine the phase changes of substances (like water) under various conditions, as well as their thermal properties.
The Kelvin scale is widely used in scientific and engineering applications, as it provides a more accurate and universal way to measure temperature, compared to other scales such as Celsius or Fahrenheit. It is also beneficial for studying extreme temperatures, such as those in outer space or during nuclear reactions, where the concept of absolute zero is crucial.
In summary, the range of temperatures in the Kelvin scale between the freezing and boiling points of water is 100 K (from 273.15 K to 373.15 K), which is useful for various scientific applications and provides a consistent and accurate measurement of temperature.
For more such questions on Kelvin scale.
https://brainly.com/question/30654754#
#SPJ11
When there is a change in the magnetic field in a closed loop of wire
A) a voltage is induced in the wire.
B) a current is created in the loop of wire.
C) electromagnetic induction occurs.
D) all of these.
E) none of these.
D) all of these. When there is a change in the magnetic field in a closed loop of wire, a voltage is induced in the wire, which in turn creates a current in the loop of wire. This process is known as electromagnetic induction.
When there is a change in the magnetic field in a closed loop of wire, Faraday's law of electromagnetic induction states that a voltage will be induced in the wire. This voltage can then cause a current to flow in the loop of wire, according to Ohm's law. Therefore, both A) a voltage is induced in the wire, and B) a current is created in the loop of wire.The phenomenon of inducing a voltage in a closed loop of wire due to a change in the magnetic field is called electromagnetic induction, which is C) another correct answer.Therefore, the correct answer is D) all of these.
Learn more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ11
What is something that you use almost every day that is a polymer?
A) metal
B) gas
C) water
D) plastic
E) wood
The answer to the question, "What is something that you use almost every day that is a polymer?" is:D) plastic
Plastic is the most common example of a polymer that we use daily in various forms, such as bags, bottles, and containers.
Polymers are materials made up of repeating units or monomers, and plastic is one of the most common types of polymers used in everyday life. Plastic can be found in items such as water bottles, food containers, and packaging materials. It is a versatile material that can be molded into various shapes and forms, making it a popular choice for many applications.
Plastic is a polymer, which means it's composed of long chains of molecules. Other options are incorrect because:
A) Metal is not a polymer; it's an element or an alloy of different elements.
B) Gas is a state of matter and not a polymer.
C) Water is a compound and not a polymer.
E) Wood is a natural material mainly composed of cellulose, which is a natural polymer, but it is not a primary example of a polymer when compared to plastic.
Learn more about natural polymers here:
https://brainly.com/question/17354715
#SPJ11
I'm checking over my new e-bike (electric assist bicycle). I prop it up so that the back wheel can spin freely (its not touching the ground). I give it a push and watch it spin. Then, at time t=0, when its angular velocity is 20.0 rad/s , I turn on the electric motor so that the wheel has a constant angular acceleration of 25.0 rad/s2 . Then at time t = 1.70 s I turn the motor off. From then on, the wheel turns through an angle of 438 rad as it gradually slows to a stop, at constant angular deceleration. Part A Through what total angle did the wheel turn between t=0 and the time it stopped? Express your answer in radians. Part B At what time does the wheel stop? Express your answer in seconds. Part C What was the wheel's angular acceleration as it slowed down? Express your answer in radians per second per second.
The wheel turned through a total angle of 494 radians. The wheel stops at 4.20 seconds. The angular deceleration of the wheel is -15.2 rad/s².
The angular displacement of the wheel while the motor was on can be found using the formula:
θ = ω₀t + (1/2)αt²
where θ is the angular displacement, ω₀ is the initial angular velocity, α is the angular acceleration, and t is the time interval.
Substituting the given values, we get:
θ = (20.0 rad/s)(1.70 s) + (1/2)(25.0 rad/s²)(1.70 s)²
θ = 56.1 rad
So the wheel turned through 56.1 rad while the motor was on.
The angular displacement of the wheel while it was slowing down can be found using the formula:
θ = ωt - (1/2)αt²
where θ is the angular displacement, ω is the angular velocity, α is the angular deceleration, and t is the time interval.
Substituting the given values, we get:
438 rad = (0 rad/s)(t - 1.70 s) - (1/2)a(t - 1.70 s)²
Simplifying and solving for t, we get:
t = 5.37 s
So the wheel turned through an additional 438 rad while slowing down.
The total angular displacement of the wheel is:
θ_total = 56.1 rad + 438 rad
θ_total = 494 rad
Therefore, the wheel turned through a total angle of 494 radians.
Part B:
To find the time at which the wheel stops, we can use the formula:
ω = ω₀ + αt
where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular deceleration, and t is the time interval.
At the moment the motor is turned off, the angular velocity of the wheel is:
ω = ω₀ + αt
ω = 20.0 rad/s + (25.0 rad/s²)(1.70 s)
ω = 62.5 rad/s
The time at which the wheel stops can be found by setting ω to 0 and solving for t:
0 = 62.5 rad/s - αt
t = 2.50 s
Adding the time the motor was on (1.70 s) gives the total time it took for the wheel to stop:
t_total = 1.70 s + 2.50 s
t_total = 4.20 s
Therefore, the wheel stops at 4.20 seconds.
Part C:
To find the angular deceleration of the wheel, we can use the formula:
ω² = ω₀² + 2αθ
where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular deceleration, and θ is the angular displacement.
At the moment the motor is turned off, the angular velocity of the wheel is 62.5 rad/s, and the angular displacement is 56.1 rad:
ω² = (20.0 rad/s)² + 2α(56.1 rad)
62.5² = 400 + 2α(56.1)
α = -15.2 rad/s²
Therefore, the angular deceleration of the wheel is -15.2 rad/s².
To know more about angular deceleration, visit:
https://brainly.com/question/245372#
#SPJ11
radio station wcco in minneapolis broadcasts at a fre- quency of 830 khz. at a point some distance from the transmitter, the magnetic-field amplitude of the electromagnetic wave from wcco is 4.82 * 10-11 t. calculate (a) the wavelength; (b) the wave number; (c) the angular frequency; (d) the electric-field amplitude.
Therefore, the electric-field amplitude of the wave is approximately 14.5 V/m.
(a) The wavelength (λ) of the wave can be found using the formula:
λ = c/f
where c is the speed of light in a vacuum and f is the frequency of the wave.
c = 3.00 × [tex]10^8[/tex]m/s (speed of light in a vacuum)
f = 830 kHz = 830,000 Hz
λ = c/f = 3.00 × [tex]10^8[/tex] m/s / 830,000 Hz ≈ 362 m
Therefore, the wavelength of the wave is approximately 362 m.
(b) The wave number (k) is given by:
k = 2π/λ
where λ is the wavelength.
k = 2π/λ = 2π/(362 m) ≈ 0.0173 m
Therefore, the wave number is approximately 0.0173 m.
(c) The angular frequency (ω) is given by:
ω = 2πf
where f is the frequency of the wave.
ω = 2πf = 2π × 830,000 Hz ≈ 5.22 × [tex]10^8[/tex] rad/s
Therefore, the angular frequency of the wave is approximately 5.22 × [tex]10^8[/tex] rad/s.
(d) The electric-field amplitude (E) can be found using the formula:
E = cB
where B is the magnetic-field amplitude.
c = 3.00 × [tex]10^8[/tex] m/s (speed of light in a vacuum)
B = 4.82 × [tex]10^8[/tex] T
E = cB = 3.00 × [tex]10^8[/tex] m/s × 4.82 × [tex]10^8[/tex] T ≈ 14.5 V/m
Learn more about amplitude Visit: brainly.com/question/3613222
#SPJ4
The wavelength of the electromagnetic wave from WCCO radio station is approximately 362.7 meters.
What is the wave number of the electromagnetic wave from WCCO radio station?The angular frequency of the electromagnetic wave from WCCO radio station is 2.24 x 10^6 radians per second.
The electric-field amplitude of the electromagnetic wave from WCCO radio station is approximately 1.51 x 10^-3 V/m.
To calculate the wavelength, we can use the formula λ = c/f, where λ is the wavelength, c is the speed of light, and f is the frequency. Given that the frequency is 830 kHz (830,000 Hz), we can convert it to 830,000 cycles per second. Plugging the values into the formula, we find that the wavelength is approximately 362.7 meters.
The wave number (k) can be calculated using the formula k = 2π/λ, where k represents the wave number. By substituting the wavelength value into the formula, we find the wave number of the WCCO radio wave.
The angular frequency (ω) can be determined using the formula ω = 2πf, where ω represents the angular frequency and f is the frequency. By substituting the given frequency value, we calculate the angular frequency of the wave.
To calculate the electric-field amplitude, we can use the relationship between the magnetic-field amplitude (B) and the electric-field amplitude
in an electromagnetic wave, which states that B = E/c. Rearranging the formula, we find that E = Bc. Plugging in the given magnetic-field amplitude value, we can calculate the electric-field amplitude of the wave.
Learn more about Electromagnetic waves
brainly.com/question/14214744
#SPJ11
An optical device that shuts down the machine any time the light field is broken is a(n):a. Photoelectric deviceb. Electromechanical devicec. Pullback deviced. Radio-frequency device
The optical device that shuts down the machine any time the light field is broken is a(n): a. Photoelectric device.
This device uses light to detect the presence of an object and triggers a response when the light field is interrupted.
Certain light-sensitive materials may emit electrons, modify their capacity to conduct electricity, or produce an electrical potential, or voltage, across two surfaces when light strikes them. Photoelectric devices are those that rely on these effects to function.
Numerous uses can be made for photoelectric devices. A photoelectric device can open doors automatically or start a counter on an assembly line by acting as an optical switch that detects the interruption of a light beam.
Learn more about "light": https://brainly.com/question/10728818
#SPJ11
A satellite whose mass is 1000 kg is in a circular orbit 1000 km above the surface of the earth. A space scientist wants to transfer the satellite to a circular orbit 1500 km above the surface. The amount of work that must be done to accomplish this is
Answer:
If a satellite whose mass is 1000 kg is in a circular orbit 1000 km above the surface of the earth then the amount of work that must be done to transfer the satellite to a circular orbit 1500 km above the surface is 2.471 x 10^8 J.
Explanation:
To transfer the satellite from a circular orbit of 1000 km to a circular orbit of 1500 km, we need to change the potential energy of the satellite. The work done to change the potential energy of an object is given by:
W = ΔU = U₂ - U₁
where U1 is the initial potential energy, U2 is the final potential energy, and ΔU is the change in potential energy.
In this case, the initial potential energy of the satellite in the 1000 km orbit is given by the gravitational potential energy:
U1 = -GMm/R1
where G is the gravitational constant, M is the mass of the Earth, m is the mass of the satellite, and R1 is the radius of the initial orbit (1000 km + the radius of the Earth).
The final potential energy of the satellite in the 1500 km orbit is:
U2 = -GMm/R2
where R2 is the radius of the final orbit (1500 km + the radius of the Earth).
Substituting the given values, we get:
U1 = -6.67e-11 * 5.97e24 * 1000 / (6.38e6 + 1000e3) = -6.053e8 J
U2 = -6.67e-11 * 5.97e24 * 1500 / (6.38e6 + 1500e3) = -3.582e8 J
The change in potential energy is therefore:
ΔU = U2 - U1 = (-3.582e8) - (-6.053e8) = 2.471e8 J
So the amount of work that must be done to transfer the satellite to the higher orbit is 2.471 x 10^8 J.
Learn more about the gravitational constant visit:
https://brainly.com/question/27943482
#SPJ11
The amount of work required to transfer the satellite from a circular orbit 1000 km above the Earth's surface to a circular orbit 1500 km above the surface is approximately [tex]4.08 \times 10^9[/tex] joules.
To transfer the satellite from its current orbit to a higher one, the space scientist needs to apply a force to the satellite that is opposite to the direction of its motion. This force will cause the satellite to slow down and move into a higher orbit.
The amount of work required to transfer the satellite can be calculated using the following formula:
Work = Change in Potential Energy = ΔU
[tex]$\Delta U = -GMm\left[\left(\frac{1}{r_f}\right) - \left(\frac{1}{r_i}\right)\right]$[/tex]
where G is the gravitational constant, M is the mass of the Earth, m is the mass of the satellite, r_i is the initial radius of the satellite's orbit, and r_f is the final radius of the satellite's orbit.
Using the given values, we have:
[tex]G = $6.674 \times 10^{-11}$ m\textsuperscript{3}/kg s\textsuperscript{2}[/tex]
[tex]M = 5.97 \times 10^{24} kg[/tex]
m = 1000 kg
r_i = 6,378.1 km + 1000 km = 7,378.1 km
r_f = 6,378.1 km + 1500 km = 7,878.1 km
[tex]$\Delta U = -\left[\left(6.674 \times 10^{-11}\right) \times \left(5.97 \times 10^{24}\right) \times 1000\right] \times \left[\left(\frac{1}{7,878.1\text{ km}}\right) - \left(\frac{1}{7,378.1\text{ km}}\right)\right]$[/tex]
[tex]= -4.08 \times 10^9[/tex] joules
To learn more about satellite
https://brainly.com/question/9266911
#SPJ4
MUST KNOW CONCEPT
In a parallel electrical circuit
A) total resistance is the sum of all of the resistors
B) current is the same through each resistor
C) voltage is different across each resistor
D) voltage is the same across each resistor
In a parallel electrical circuit, the correct options are B and D. This means that the current is the same through each resistor and the voltage is the same across each resistor.
This happens because in a parallel circuit, each component is connected to the same two points in the circuit, creating multiple paths for the current to flow. As a result, the current is divided among the resistors, but the voltage remains constant across each one. This is an important concept to understand when designing and analyzing electrical circuits.
In a parallel circuit, all the components are connected in parallel, meaning they share the same voltage across them. Unlike a series circuit, where the total resistance is the sum of all resistors, in a parallel circuit, the total resistance is lower than the individual resistances. Additionally, the current in a parallel circuit is divided among the parallel branches, so it's not the same through each resistor.
To know more about electrical visit :-
https://brainly.com/question/776932
#SPJ11
What will happen to a straight fence that undergoes elastic strain during an earthquake?
A) The fence will bend in the direction of stress.
B) The fence will bend away from the direction of stress.
C) The fence will remain straight.
D) The fence will break.
During an earthquake, the ground experiences significant stress and movement, which can lead to elastic strain on structures, such as a straight fence.
Elastic strain is the temporary deformation of materials under stress, where the material returns to its original shape once the stress is removed.
In this case, if the straight fence undergoes elastic strain during the earthquake, the fence will respond according to the direction of stress. Therefore, the correct answer is:
A) The fence will bend in the direction of stress.
As the stress is applied to the fence, it will bend or deform in the same direction as the force. However, since the strain is elastic, the fence will return to its original straight shape once the earthquake has subsided and the stress is removed.
It is essential to note that the fence will not bend away from the stress, remains straight, or break due to the elastic nature of the strain. Elastic strain allows the fence to absorb the energy from the earthquake and then release it, preventing permanent deformation or damage.
To learn more about elastic strain, refer:-
https://brainly.com/question/31598065
#SPJ11
An object was weighed in air had a mass of 40. 0 gram. In water, its apparent mass is 5. 00 grams. What is the density (in g/cm3) of the object correct to three significant figures
The density of the object is 0.103 g/cm³, correct to three significant figures.
To find the density of the object, we need to use the principle of buoyancy. The difference between the weight of the object in air and its apparent weight in water is due to the buoyant force exerted by the water on the object. This force is equal to the weight of the water displaced by the object.
The mass of the water displaced can be calculated as follows:
Mass of water = density of water x volume of water displaced
Since the volume of water displaced is equal to the volume of the object, we can write:
Mass of water = density of water x volume of object
The apparent weight of the object in water is equal to the weight of the object minus the weight of the water displaced:
Apparent weight = weight of object - weight of water displaced
We know that the weight of the object in air is 40.0 grams, which is also its mass, since the acceleration due to gravity is approximately 9.81 m/s². Therefore, the weight of the object is:
Weight of object = mass of object x acceleration due to gravity
= 40.0 g x 9.81 m/s²
= 392.4 g m/s²
The weight of the water displaced is equal to the buoyant force, which can be calculated using Archimedes' principle:
Buoyant force = weight of water displaced = apparent weight of object
Substituting the values we have:
Weight of water displaced = 392.4 g m/s² - 5.00 g m/s²
= 387.4 g m/s²
We can now find the volume of the object:
Volume of object = volume of water displaced
Density of object = mass of object / volume of object
Substituting the values we have:
Density of object = 40.0 g / (387.4 g/cm³ x 1 cm³)
= 0.103 g/cm³
Therefore, the density of the object is 0.103 g/cm³, correct to three significant figures.
Learn more about density ,
https://brainly.com/question/29775886
#SPJ4
when is an object at opposition? a) when the object's motion changes direction and becomes retrograde b) when the object is on the opposite side of the sun as earth c) when earth and the sun are on opposite sides of the object d) when the object is on the opposite side of earth as the sun
An object is when the earth and the sun are on opposite sides of the object. The answer is c).
An object is said to be at opposition when it is located on the opposite side of the sky as the Sun, as seen from the observer's position. In other words, the Earth, the Sun, and the object are in a straight line, with the Earth in the middle.
This is the point in time when the object is closest to Earth and brightest in the sky, making it an ideal time for observations. Opposition occurs for planets and other Solar System bodies that orbit farther from the Sun than Earth, such as Mars, Jupiter, and Saturn.
During opposition, the object rises at sunset, reaches its highest point in the sky around midnight, and sets at sunrise. Opposition occurs roughly once a year for each outer planet, but can vary due to the eccentricity of their orbits.
To know more about earth, refer here:
https://brainly.com/question/24629047#
True or False1.For an edge (actually a screw) dislocation line and Burgers vectors are parallel. False2. Substitutional diffusion involves the interchange of an atom from normal lattice position to adjacent vacant lattice site or vacancy.3. Resilience is the capacity of a material to absorb energy when it is deformed plastically, and then upon unloading, to have this energy recovered.4 Critical resolved shear stress represents the minimum shear stress required to initiate slip, and it is a function of the loading direction relative to the slip direction.5 deformation of elastomers that are amorphous and lightly crosslinked corresponds to the unkinking and uncoiling of chains in response to an applied tensile stress.6 Brittle fracture takes place without any appreciable deformation and by rapid crack propagation.7 Extrusion increases dislocation concentration.8 Recrystallization is the formation of a new set of strain-free and equiaxed grains that have low dislocation densities.9 Creep is a failure mechanism that results from cyclic stress at elevated temperatures for prolonged periods of time.10 Strengthening by grain size reduction typically results in a decrease in the elastic modulus of a material.
The statements 1,2 ,9 and 10 are false and the other statements are true.
1. For an edge (actually a screw) dislocation line and Burgers vectors are parallel. The statement is False
2. Substitutional diffusion involves the interchange of an atom from normal lattice position to adjacent vacant lattice site or vacancy. True
3. Resilience is the capacity of a material to absorb energy when it is deformed plastically, and then upon unloading, to have this energy recovered. False (This is the definition of toughness, not resilience. Resilience refers to the ability to absorb energy when elastically deformed.)
4. Critical resolved shear stress represents the minimum shear stress required to initiate slip, and it is a function of the loading direction relative to the slip direction. True
5. Deformation of elastomers that are amorphous and lightly crosslinked corresponds to the unkinking and uncoiling of chains in response to an applied tensile stress. True
6. Brittle fracture takes place without any appreciable deformation and by rapid crack propagation. True
7. Extrusion increases dislocation concentration. True
8. Recrystallization is the formation of a new set of strain-free and equiaxed grains that have low dislocation densities. True
9. Creep is a failure mechanism that results from cyclic stress at elevated temperatures for prolonged periods of time. False (Creep results from constant stress at elevated temperatures. Fatigue is the failure mechanism resulting from cyclic stress.)
10. Strengthening by grain size reduction typically results in a decrease in the elastic modulus of a material. False (Strengthening by grain size reduction does not significantly affect the elastic modulus. It typically increases the strength and ductility of the material.)
To learn more about elastic modulus https://brainly.com/question/30402322
#SPJ11
In a p-n junction the potential barrier is due to the charges on either side of the junction; these charges are ____. (multiple choice)A. majority and minority carriers.B. majority carriers.C. minority carriers.D. fixed donor and acceptor ions.
The potential barrier in a p-n junction is due to fixed donor and acceptor ions, so the correct answer is D.
A p-n junction is formed by joining a p-type semiconductor with an n-type semiconductor. The p-type semiconductor contains holes as majority carriers and the n-type semiconductor contains electrons as majority carriers.
At the junction, the electrons diffuse from the n-side to the p-side and combine with the holes, creating a depletion region that is depleted of free charge carriers.
This depletion region contains fixed donor ions on the n-side and fixed acceptor ions on the p-side, which create an electric field that opposes further diffusion of charge carriers. This electric field creates a potential difference across the junction, resulting in a potential barrier.
The potential barrier prevents the majority carriers from crossing the junction, allowing the p-n junction to act as a rectifier and creating useful electronic properties such as diodes and transistors.
To know more about potential barrier, refer here:
https://brainly.com/question/14410006#
#SPJ11
which of the following statements are true concerning special relativity? check all that apply. which of the following statements are true concerning special relativity?check all that apply. time can no longer be regarded as an absolute quantity. clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest. light propagates through empty space with a definite speed independent of the speed of the source or observer. the laws of physics have the same form in all inertial reference frames. the length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.
The statements given are about special relativity and all of them are true because consists of key concepts in special relativity.
Special relativity is a theory developed by Albert Einstein that explains the behavior of objects in motion at high speeds near the speed of light. The correct statements concerning special relativity are:
- Time can no longer be regarded as an absolute quantity.
- Clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest.
- Light propagates through empty space with a definite speed independent of the speed of the source or observer.
- The laws of physics have the same form in all inertial reference frames.
- The length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.
These statements are all true and are key concepts in special relativity. The theory has been extensively tested and has been found to be accurate in describing the behavior of objects at high speeds.
To know more about Einstein’s Special Relativity visit:
https://brainly.com/question/30054334
#SPJ11
A car travels 200 km in the first 2. 5hr of a trip, it stop for 1/2 hour then travels the final speed of 200 km in 2 hours find the average speed of the car
The average speed of the car for the entire trip is 80 km/h.
The total distance travelled is the sum of the distances travelled in the two legs of the trip, and the total time taken is the sum of the times taken in each leg.
In the first leg of the trip, the car travels 200 km in 2.5 hours. Therefore, its speed in this leg is:
[tex]v1=d1/t1=200 km/2.5 hours = 80km/h[/tex]
During the 0.5-hour rest stop, the car does not travel any distance, so we can ignore this time period when calculating the average speed.
In the second leg of the trip, the car travels another 200 km, this time in 2 hours. Therefore, its speed in this leg is:
[tex]v2=d2/t2 = 200km/2hours = 100km/h[/tex]
The total distance travelled is 200 km + 200 km = 400 km, and the total time taken is 2.5 hours + 0.5 hours + 2 hours = 5 hours. Therefore, the average speed of the car for the entire trip is:
average speed = total distance / total time = 400 km / 5 hours = 80 km/h
To know more about speed:
https://brainly.com/question/29127452
#SPJ4
What would be the absolute magnitude of a classical cepheid variable that had a period of 85 days?
The absolute magnitude of the classical Cepheid variable with a period of 85 days would be approximately -4.36 in the V-band.
The period-luminosity relationship for Cepheids can be expressed as:
M = a * log(P) + b
Mv = -2.76 * log(P) - 1.43
Using this relationship and plugging in the given period of 85 days, we can calculate the absolute magnitude of the Cepheid:
Mv = -2.76 * log(85) - 1.43 = -4.36
Cepheid variables are a type of pulsating star that exhibits periodic changes in brightness. These stars are important tools in astrophysics for measuring cosmic distances. Since the period of pulsation can be measured from observations of the star's light curve, and the intrinsic brightness of Cepheids can be determined from their pulsation periods and other properties, these stars can be used as standard candles to measure distances to other galaxies.
The brightness of a Cepheid variable star changes due to periodic expansions and contractions of its outer layers. As the star expands, its temperature decreases and it becomes less luminous. Conversely, as the star contracts, its temperature increases and it becomes more luminous. This cycle repeats itself with a period that is proportional to the star's intrinsic brightness.
To learn more about Cepheid variables visit here:
brainly.com/question/30005008
#SPJ4
_____ is maintained throughout the auditory system, allowing for processing of sound waves from lower to higher frequencies.
Tonotopy is maintained throughout the auditory system, allowing for processing of sound waves from lower to higher frequencies.
In physiology, tonotopy is the spatial arrangement of where sounds of different frequency are processed in the brain. Tones close to each other in terms of frequency are represented in topologically neighbouring regions in the brain. They are established during the maturation of the inner ear. In mammals, the development starts with the responsiveness of hair cells to rather low frequencies in the middle and upper basal cochlear locations. It is crucial to complex pitch perception and provide a new tool in the search for the neural basis of pitch. Auditory nerve fibers are tonotopically organized so that fibers near the middle of the nerve bundle carry information about low frequencies .
To know more about auditory system, click here:-
https://brainly.com/question/28170025
#SPJ11
about the atmospheres on the four giant planets, which one of the following statements is not correct? (a) four giant planets all have tropospheric clouds. (b) four giant planets all have stratospheric hazes. (c) water vapor is the only gas, which can condensate into clouds on uranus and neptune. (d) the atmospheres on the giant planets are thicker than the atmosphere on earth.
The statement that is not correct is (c) water vapor is the only gas which can condensate into clouds on Uranus and Neptune. Although water vapor is an important component of the atmospheres of Uranus and Neptune, these planets also have other gases, such as methane, ammonia, and hydrogen sulfide, that can condense into clouds. In fact, methane is responsible for the blue color of Uranus and Neptune, and it condenses into clouds in the upper atmosphere of these planets.
The four giant planets in our solar system are Jupiter, Saturn, Uranus, and Neptune. These planets are called gas giants because they are primarily composed of hydrogen and helium gas, with smaller amounts of other gases and trace elements. Their atmospheres are therefore quite different from the solid, rocky planets like Earth.
All four giant planets have tropospheric clouds, which are clouds that form in the lower part of the atmosphere where the temperature and pressure are high enough to support the condensation of gases into liquid or solid particles. The composition of these clouds varies depending on the planet, with different gases condensing at different altitudes and temperatures.
Finally, the atmospheres of the giant planets are indeed much thicker than the atmosphere of Earth. Jupiter and Saturn have the thickest atmospheres of the four, with pressures at their surfaces that are many times greater than the pressure at the surface of Earth. Uranus and Neptune have thinner atmospheres than Jupiter and Saturn, but they are still much denser than the Earth's atmosphere.
To know more about the atmospheres refer here :
https://brainly.com/question/26767532#
#SPJ11