Answer:
Dilute the sample
Explanation:
The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.
However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.
The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.
At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.
Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.
Learn more about proteins here:
https://brainly.com/question/30986280
#SPJ 6
Which of the following is unlikely to form a compound?
a. S
b. H
c. K
d. Ar
d. Si
Answer:
I think the answer is Ar, k or just k. Can you pick two answers?
Explanation:
I hope this helps.
P.S. you put two d's
calculate the energy of a photn of red light with a wavelength of 6.45x10^-5cm
Answer:
6.45 × 10-5 centimeters
Explanation:
Balance the equation:
Ca(OH)2 +2 HBr → CaBr2 + 2 H2O
4. How are isotopes of the same element different? Select all that apply.
[]They have different masses.
[]They have different numbers of electrons.
[]They have different numbers of neutrons.
[]They have different numbers of protons.
[tex]\huge \bf༆ Answer ༄[/tex]
The Correct choice is ~ A
Isotopes are the elements with same Atomic Number but different masses ~
7
How many grams are there in 5 moles of CO2?
A 225.5 g
B) 220.05 g
C)240 g
D) 230 g
which is the first news paper of Nepal
Answer:
Nepal Bhasa Patrika
Explanation:
Nepal Bhasa Patrika
Calculate the molar mass of NH4NO3. Molar mass of NH4NO3 = g/mol.
The molar mass of NH4NO3 in g/mol is 80g/mol.
HOW TO CALCULATE MOLAR MASS:
The molar mass of a compound can be calculated by summing the atomic masses of its constituent elements.
In ammonium nitrate (NH4NO3), there are nitrogen, hydrogen, and oxygen elements.
Atomic mass of nitrogen = 14Atomic mass of oxygen = 16Atomic mass of hydrogen = 1Molar mass of NH4NO3 = 14 + 1(4) + 14 + 16(3)
Molar mass of NH4NO3 = 80g/mol
Therefore, the molar mass of NH4NO3 in g/mol is 80g/mol.Learn more about molar mass at: https://brainly.com/question/8101390?referrer=searchResults
Answer:
80g/mol
Explanation:
edge 2022
Alison observes that when she injects additional gas molecules into a container of gas, the number of collisions in the container (and the pressure inside) increases. She then increases the volume of the container just enough to restore it to its original pressure. Which of the following laws best describes what Alison observed?
A. Amonton's Law
B. Avogadro's Law
C. Boyles Law
D. Charles's Law
E. Dalton's Law
Answer:
Explanait it is not d
does Waves move in a circular motion.
True or false
why yes
Waves are created by energy passing through water, causing it to move in a circular motion
Consider the reaction below. 2H2 O2 Right arrow. 2H2O How many moles of water are produced from 13. 35 mol of oxygen? 6. 675 mol 26. 70 mol 53. 40 mol 66. 75 mol.
Considering the reaction stoichiometry, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.
The balanced reaction is:
2 H₂ + O₂ → 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
H₂: 2 moles O₂: 1 mole H₂O: 2 molesThen you can apply the following rule of three: if by stoichiometry 1 moles of O₂ produce 2 moles of H₂O, 13.35 moles of O₂ will produce how many moles of H₂O?
[tex]amount of moles of H_{2} O=\frac{13.35 moles of O_{2} x2 moles of H_{2} O}{1 mole of O_{2}}[/tex]
amount of moles of H₂O= 26.7 moles
Finally, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.
Learn more about stoichiometry:
brainly.com/question/16487206?referrer=searchResults brainly.com/question/14446695?referrer=searchResults brainly.com/question/11564309?referrer=searchResults brainly.com/question/4025026?referrer=searchResults brainly.com/question/18650135?referrer=searchResultsMatch each term in the first column with an example in the second column. On a sheet of paper, write the letter of the answer.
1. physical property
2. chemical property
3. solid.
4. liquid
5. physical change
6. chemical change
———————————————
A. ability to burn
B. rust appears on a nail
C. a puddle freezes
D. substance that has a definite shape and volume
E. temperature or destiny
F. substance that has a definite volume, but no definite shape
Answer:
4 = f
3 = d
5 = c
6 = b
2 = a
1 = e
Explanation:
`Carbon Dioxide and Water are the _______ in a chemical reaction. 2. Reactants are also called the starting _______ in a chemical reaction.: Reactants are also called the starting _______ in a chemical reaction. 3. This type of energy comes from the sun: a This type of energy comes from the sun 4. You get this type of energy from food: b You get this type of energy from food 5. The process by which plants use the sun to produce glucose and oxygen.: The process by which plants use the sun to produce glucose and oxygen. 6. The products of photosynthesis: The products of photosynthesis 7. The location of photosynthesis in plant cells: The location of photosynthesis in plant cells 8. Another name for glucose is: Another name for glucose is 9. Energy is provided by this cell organelle during cellular respiration: Energy is provided by this cell organelle during cellular respiration 10. The largest source of energy on earth comes from the: d The largest source of energy on earth comes from the Column B a.Chloroplast b.Ingredients c.Reactants d.Sun e.Radiant energy f.Sugar g.Chemical energy h.Glucose and Oxygen i.Mitochondria j.Photosynthesis
For the following hypothetical reaction:
3A + 12B --> 3C
How many moles of B will you need to convert 5 moles of A into as many moles of C as possible?
Answer:
20
Explanation:
You need 4 times the amount of B, compared to a (there is a 3A:12B which reduces to 1:4), so 4 times 5 is 20.
Hope this helps!
What type of chemical reaction is Al + FeO --> Al2O3 + Fe
Answer:
single reaction equation
Explanation:
Type of Chemical Reaction: For this reaction we have a single replacement reaction. Balancing Strategies: In this single replacement (also called displacement) reaction the Al and Fe are switching places.
one difference between a chemical formula and a chemical equation is that the chemical equation shows:
Write word equations for the reactions of a) magnesium with chlorine b) potassium with oxygen c) sodium with bromine d) carbon with oxygen.
discuss why people use the scientific method
Answer:
They use the scientific method to study different aspects of how people think and behave. They also use the scientific method because it is evidence-based, standardized and objective in conducting experiments.
Food waste, like a feather or a bone, fall into food, causing
contamination.
Physical
Chemical
Pest
Cross-conta
Answer:
what do I need to do?..
..
Feather or bone when fall into food causing Physical contamination.
Food waste, like a feather or a bone etc fall into food causing Physical contamination because the contaminants such as feather and bone are mixed in the food physically not chemically. These contaminants can be removed through physical means such as with the help of hand.
Some contaminants mix with the food chemically means they react with the food and produce something new. Such type of contaminants are present in liquid form so we can conclude that feather or a bone etc when fall into food causing Physical contamination.
Learn more about contamination here: https://brainly.com/question/3459685
Learn more: https://brainly.com/question/25889410
A gas in a rigid container at 25°C has a pressure of 0. 96 atm. A change in temperature causes the pressure to increase to 1. 25 atm. What is the new temperature of the gas? Use StartFraction P subscript 1 over T subscript 1 EndFraction equals StartFraction P subscript 2 over T subscript 2 EndFraction. â€""44. 2°C 32. 6°C 115°C 388°C.
The new temperature of the gas is 115 °C
From the question given above, the following data were obtained:
Initial temperature (T₁) = 25 °C = 25 + 273 = 298 K Initial pressure (P₁) = 0.96 atmNew pressure (P₂) = 1.25 atmNew temperature (T₂) =?The new temperature of gas can be obtained as follow:
[tex] \frac{P_1}{T_1} = \frac{P_2}{T_2} \\ \\ \frac{0.96}{298} = \frac{1.25}{T_2} \\ \\ cross \: multiply \\ \\ T_2 \times 0.96 = 298 \times 1.25 \\ \\ divide \: both \: side \: by \: 0.96 \\ \\T_2 = \frac{298 \times 1.25 }{0.96} \\ \\ T_2 = 388 \: K \\ \\ subtract \: 273 \: from \: 388 \: to \: express \: the \: answer \: im \: \degree \: C \\ \\ T_2 = 388 - 273 \\ \\ T_2 = 115 \: \degree \: C [/tex]
Therefore, the new temperature is 115 °C
Learn more about gas laws: https://brainly.com/question/25862018
Rain is-pouring down on you. Your friend asks where so much water
came from. You explain that the water could once have been
a) in a lake.
c) in an ocean.
-b) in-a river.
d) any of the above.
Answer:
D
Explanation:
It could come from anybody of water around you that had some water evaporated.
Choose all the answers that apply.
What’s is the freezing point of water?
1. 0’c
2.32’c
3.32’F
4.0’F
Answer: The answers are the first and third options.
Answer:
1.0'c
3.32'f
Explanation:
How many grams of oxygen would be contained in 4.00 L at 158kPa and 28 C?
Answer:
it would be 53
Explanation:
because 4.00 L at 158kPa and 28c would be 53 grams of oxygine
001 10.0 points
If you mix 4.5 g of HCl in enough water to
make 0.9 L (900 mL) of solution, what is the
molarity of the solution?
Answer in units of M.
Ethanol (C2H5OH) reacts with oxygen gas in a combustion reaction. How many liters of carbon dioxide gas are produced at STP when 375 mL of a 75.0% ethanol solution by mass with a density of 1.22 g/mL reacts with excess oxygen?
The volume of carbon dioxide produced when 375 mL of a 75.0% ethanol solution by mass with a density of 1.22 g/mL reacts with excess oxygen is 667.52 L.
We are told in the question that the solution contains 75.0% ethanol solution by mass.
Hence;
Density of solution = mass/volume
mass = Density × volume = 1.22 g/mL × 375 mL = 457.5 g
Mass% = mass of solute/ mass of solution × 100
Mass of solute = x
Mass of solution = 457.5 g
Mass percent = 75.0%
Substituting values;
75 = x/457.5 + x × 100
75/100 = x/457.5 + x
0.75(457.5 + x) = x
343.125 + 0.75x = x
343.125 = x - 0.75x
x = 343.125/0.25
x = 1372.5 g
The equation of the reaction is;
C2H6O(l) + 3O2(g) → 2CO2(g) + 3H2O(l)
Number of moles of ethanol = 1372.5 g/46 g/mol = 29.8 moles
From the reaction equation;
2 moles of ethanol produces 2 moles of carbon dioxide
29.8 moles of ethanol also produces 29.8 moles of carbon dioxide
If 1 mole of carbon dioxide occupies 22.4 L
29.8 moles of carbon dioxide occupies 29.8 moles × 22.4 L/ 1 mole
= 667.52 L
Learn more: https://brainly.com/question/17638582
Compare the structure and bonding of the three compounds:
• carbon dioxide
•magnugum ondo
•silicon dioxide
(6 mark question)
Silicon dioxide is a covalent network solid. Magnesium oxide is an ionic compound while carbon dioxide is a covalent molecule.
Carbon dioxide is a covalent compound. The compound contains polar C-O bonds but overall the compound is nonpolar as such the molecules are held together by only weak dispersion forces.
The compound magnesium oxide is an ionic solid. It is composed of magnesium ions and oxygen ions in a crystal lattice. Owing to the fact that the ions are very small, the lattice energy is large and the compound is almost insoluble in water.
Silicon dioxide is a covalent network solid which is composed of chains of silicon - oxygen bonds. The network solid forms a very rigid structure having a high melting point.
Learn more about network solids: https://brainly.com/question/8236583
explain how wavelength is related to the energy of a wave
Answer: as the wavelength gets shorter, the energy increases; as the wavelength gets longer, the energy decreases. The greater the energy, the larger the frequency and the shorter (smaller) the wavelength.
Answer:
Just as wavelength and frequency are related to light, they are also related to energy. The shorter the wavelengths and higher the frequency corresponds with greater energy. So the longer the wavelengths and lower the frequency results in lower energy. The energy equation is E = hν.
Just saying, you have the wrong subject. This should be physics I think.What type of mixture is throughly mixing powdered lemonade with water
Answer:
I believe it would be a solution I could be wrong tho
Explanation:
Answer:
a solution
Homogeneous mixtures (solutions)
Explanation:
Lemonade is a special type of mixture called a solution.
...................................................................................................................................................
What type of mixture is made by thoroughly mixing powdered lemonade with water?
Homogeneous mixtures (solutions)
Mixtures with substances dissolved evenly into one another, like pink lemonade powder dissolved in water, are called homogeneous mixtures, or solutions.
which tool would be best for measuring centimeters
A. Metric ruler
B. Balance scale
C. Meter scale
D. Measuring tape
Answer:
the answer is d
Explanation:
Chlorine has 7 valence electrons. Describe the type of bond that sodium would have
with chlorine. Write the chemical formula of the compound these two elements would form together. (i figured it out nvm)
1. How many centimeters are in 13.4 inches?
34.036 Thats how many
Answer:
34.036
Explanation:
There are 2.54 centimeters in one inch so you multiply 13.4 and 2.54 to get 34.036.