the average life expectancy in madagascar is 66 years. what is this time in si units? (assume one year is 365 days.)

Using Runge-Kutta 2nd order Heun's method, the speed (w) at t = 0.8s is approximately 0.0081.

Given:

Voltage input (V) = 30V

Initial speed (w) = 0

Step size (h) = 0.4s

Time at which speed is to be determined (t) = 0.8s

We need to determine the speed (w) at t = 0.8s using Heun's method.

We have k₁ = f(t₁, W₁) = 0.02 + 0.06w₁ (using the given equation)

At t = 0 and w = 0 (initial conditions), we have:

k₁ = 0.02 + 0.06(0) = 0.02

We have k₂ = f(t₁ + h, w₁ + k₁h) = 0.02 + 0.06(w₁ + 0.02h)

So, at t = 0.4s and w = 0 (initial conditions), we have:

k₂ = 0.02 + 0.06(0.02 * 0.4) = 0.02 + 0.00048 = 0.02048

So, W₂ = w₁ + (k₁ + k₂)(h/2)

   = 0 + (0.02 + 0.02048)(0.4/2)

   = 0.04048(0.2)

   = 0.008096

Therefore, using Runge-Kutta 2nd order Heun's method, the speed (w) at t = 0.8s is approximately 0.0081.

Learn more about the Runge-Kutta method here:

https://brainly.com/question/32093981

#SPJ4

The complete question is:

The speed of a motor supplied with a voltage input of 30V, assuming the system is without damping, can be expressed as 30 = (0.02)+(0.06)w dt If the initial speed is zero and a step size of h = 0.4 s, determine the speed w at t = 0.8 s by using the Runge-Kutta 2nd order Heun's method. Heun's method: Wi+1=W₁ = w₁ + (-/-^₁ + = -K ₂ ) h where, k₁ = f(t₁, W₁) and k₂ = f(t₁ + h, w₁ + k₁h), the speed (w) at t = 0.8s is approximately 0.0081.

There are several differences in behavior between an electrically conducting sphere and an insulating sphere.
Firstly, a conducting sphere can be charged by friction, whereas an insulating sphere cannot. This is because the conducting sphere allows electrons.

Secondly, an uncharged object can be charged by touching it to a charged conducting sphere, but not by touching it to a charged insulating sphere. This is because the conducting sphere allows charge to flow easily between objects, while an insulating sphere does not.

Excess charge placed on a conducting sphere becomes distributed over the entire surface of the sphere. Excess charge placed on an insulating sphere can remain where it is placed. conducting spheres have mobile electrons that can move freely, allowing the charge to distribute evenly over the surface  Insulating spheres have electrons that are not as mobile, which means the charge cannot move as freely and tends to remain where it was placed. the fact that polarization occurs in conducting spheres when brought near a charged object, while insulating spheres do not experience this effect.

To know more about conducting Visit;

https://brainly.com/question/30640866

#SPJ11

The set of two charges experiencing the strongest attraction is charges of +2 C and -2 C, separated by 1 m. Option A.

+2 C and -2 C is an attracting force because the charges are opposite

For Charges of +2 C and -2 C the force of attraction between two charges is directly proportinal to the product of their charges and inversely proportional to the square of the distnce between them.

The product of the charges is 2 × -2 = -4 C², and the square of the distance between them is 1² = 1 m².

The force of attraction between these two charges is -4 / 1 = -4 N.

Find more exercises on charges;

https://brainly.com/question/6562914

#SPJ1

The potential energy of the 2.0 kg block as it passes through the equilibrium position is 0 J (Option d).

The potential energy of the block at its maximum displacement from the equilibrium position is given by the formula U = 1/2 kx^2, where k is the spring constant and x is the displacement. At the maximum displacement, x=1.5m, so the potential energy is U = 1/2 (72 N/m) (1.5m)^2 = 81J.

The potential energy of a block attached to a spring can be calculated using the formula PE = (1/2)kx^2, where PE is the potential energy, k is the spring constant, and x is the displacement from the equilibrium position.
When the block passes through the equilibrium position, the displacement x becomes 0, since the block is at its resting position. Therefore, the potential energy at this point is:
PE = (1/2)(72 N/m)(0 m)^2 = 0 J.

To know more about potential energy  visit :-

https://brainly.com/question/24284560

#SPJ11

The largest centric load P that can be applied is 67.2 kN.

To determine the largest centric load P that can be applied, we need to analyze the stress distribution in the glued scarf splice. The maximum allowable stresses given are 400 kPa in tension and 600 kPa in shear.

First, let's calculate the tensile stress in the splice perpendicular to the joint (tension stress):

σ_tension = P / (2 * t * b) [Formula for tensile stress in a rectangular cross-section]

Here, t = thickness of the members, and b = width of the members.

Next, let's calculate the shear stress in the splice parallel to the joint (shear stress):

τ_shear = P / (2 * t * h) [Formula for shear stress in a rectangular cross-section]

Here, h = height of the members.

We can use Mohr's circle to determine the combined stress at the point where maximum stress occurs. This is given by:

σ_max = (σ_tension + σ_shear) / 2 + √[((σ_tension - σ_shear)/2)^2 + τ_shear^2]

The largest centric load P that can be applied is obtained when the combined stress σ_max is equal to the maximum allowable stress in tension (400 kPa):

P = σ_max * (2 * t * b)

By substituting the given values into the calculations, we can determine the largest centric load P.

The largest centric load that can be applied is 67.2 kN, considering the maximum allowable stresses in the joint and using Mohr's circle to analyze the stress distribution.

To know more about load, visit:

https://brainly.com/question/14530036

#SPJ11

If the lead spheres were replaced with copper spheres of equal mass, the value of g would not be affected. This is because the value of g is dependent on the mass of the Earth and the distance between the object and the Earth's center. The mass and composition of the object being measured do not affect the value of g. Therefore, whether the spheres were made of lead or copper, the value of g would remain constant. However, the experiment may have different results due to differences in the density and physical properties of the two metals, which could affect the accuracy and precision of the measurements taken.

If the lead spheres were replaced with copper spheres of equal mass, the value of g would remain the same. Here's a step-by-step explanation:

1. In the experiment, two spheres with equal masses are used to measure the gravitational force between them.
2. The gravitational force (F) depends on the mass of the objects (m1 and m2) and the distance between their centers (r) according to the formula: F = G * (m1 * m2) / r^2, where G is the gravitational constant.
3. If you replace the lead spheres with copper spheres of equal mass, the masses (m1 and m2) remain the same in the formula.
4. Since the mass and distance between the spheres have not changed, the gravitational force (F) remains the same as well.
5. The value of g (acceleration due to gravity) is calculated using the formula: g = F / m, where m is the mass of the object experiencing the gravitational force.
6. Since the gravitational force (F) and mass (m) have not changed, the value of g will remain the same even if the material of the spheres is changed from lead to copper, as long as their masses are equal.

In summary, replacing lead spheres with copper spheres of equal mass in an experiment to measure the gravitational constant (g) would not change the value of g.

To know more about Equal Masses visit

https://brainly.com/question/32077102

SPJ11

False. Reverberation time of a room can be increased by adding sound-absorbing materials to the walls, such as acoustic panels or curtains. These materials reduce the reflection of sound waves, thus reducing the overall reverberation time in the room.

Reverberation time refers to the duration it takes for sound to decay in a room after the sound source stops. It is a measure of how long sound lingers in the room before it fades away. In rooms with longer reverberation times, sound reflections bounce off the walls, ceiling, and other surfaces multiple times, creating a prolonged and sustained sound.

When the walls of a room are covered with sound-absorbing materials, such as acoustic panels or curtains, these materials absorb a significant portion of the sound energy instead of reflecting it back into the room. As a result, the sound waves lose their energy more quickly, reducing the overall reverberation time.

Learn more about Reverberation time of a room from

https://brainly.com/question/31790803

#SPJ11

The distance from a 21 MW point source of electromagnetic waves where the electric field amplitude is 0.050 V/m is approximately 1291.55 meters.

To find the distance from the point source, we use the formula P = (1/2)ε₀cE²A, where P is the power of the source, ε₀ is the permittivity of free space, c is the speed of light, E is the electric field amplitude, and A is the surface area of the sphere.

Rearranging the formula for distance (radius of the sphere), we get r = √((2P) / (ε₀cE²)). Plugging in the given values: P = 21 MW, E = 0.050 V/m, ε₀ ≈ 8.85 x 10⁻¹² F/m, and c ≈ 3 x 10⁸ m/s, we can solve for r, which is approximately 1291.55 meters.

Learn more about electromagnetic waves here:

https://brainly.com/question/29774932

#SPJ11

When the copper sheet is pulled to the right, a resisting force pulls it to the left due to electromagnetic induction.

This phenomenon occurs because the motion of the copper sheet through the magnetic field causes a change in magnetic flux, leading to the generation of an electromotive force (EMF) according to Faraday's law of electromagnetic induction.

The induced EMF creates an opposing current, resulting in the resisting force known as the electromagnetic force or Lenz's law. It acts in such a way as to oppose the change in the magnetic flux.

Thus, whether the sheet is pulled to the right or pushed to the left, the resulting effect is the same—the resisting force acts to oppose the motion of the copper sheet due to electromagnetic induction.

For more information on Electromagnetic Induction visit :-

https://brainly.com/question/31147203

#SPJ11

The ideal gas constant for air, denoted as R, has a value of 287 J/(kg·K). It is a constant used in gas laws to relate the properties of air to temperature, pressure, and volume.

In this problem, air is modeled as an ideal gas. We are given the following information:

- Inlet conditions: Temperature (T₁) = 270 K, Velocity (V₁) = 180 m/s

- Outlet conditions: Velocity (V₂) = 48.4 m/s

Since the diffuser is well-insulated, we can assume negligible heat transfer (Q) and potential energy effects. Therefore, the process can be considered adiabatic and isentropic.

In an adiabatic and isentropic process, the total energy per unit mass remains constant. Therefore, we can use the stagnation properties (denoted by a subscript "0") to analyze the process.

The stagnation temperature (T₀) is the temperature that the gas would reach if it were brought to rest isentropically. The stagnation temperature is related to the static temperature and velocity by the equation: T₀ = T + (V² / (2·Cp)), where Cp is the specific heat at constant pressure.

Since the process is isentropic, the ratio of specific heats (γ) remains constant. For air, γ ≈ 1.4.

Using the stagnation temperature equation, we can calculate the stagnation temperature at the inlet and outlet:

T₀₁ = T₁ + (V₁² / (2·Cp))

T₀₂ = T₂ + (V₂² / (2·Cp))

Since the process is adiabatic, the stagnation temperature remains constant throughout the diffuser: T₀₁ = T₀₂

By equating the expressions for T₀₁ and T₀₂ and rearranging the terms, we can solve for Cp:

T₁ + (V₁² / (2·Cp)) = T₂ + (V₂² / (2·Cp))

Simplifying the equation and solving for Cp, we get:

Cp = (V₁² - V₂²) / (2·(T₂ - T₁))

Finally, using the ideal gas equation: Cp - Cv = R, where Cv is the specific heat at constant volume, and Cp = γ·Cv, we can substitute Cp with γ·Cv and rearrange the equation to solve for R:

R = Cp - Cv

R = γ·Cv - Cv

R = (γ - 1)·Cv

For air, the value of γ is approximately 1.4. Therefore, we can calculate R as follows:

R = (1.4 - 1)·Cv

The specific heat at constant volume (Cv) for air is approximately 717 J/(kg·K). Substituting this value into the equation, we find:

R = (1.4 - 1)·717 J/(kg·K)

R ≈ 287 J/(kg·K)

Hence, the ideal gas constant for air is approximately 287 J/(kg·K).

To know more about volume, refer here:

https://brainly.com/question/28058531#

#SPJ4

A concentration cell is a type of electrochemical cell in which the same electrode material is used as both the anode and cathode, but the concentrations of the reactants or products are different in each half-cell.

The correct  answer is: c. zero.

In a concentration cell, the standard cell potential is always zero because there is no net driving force for electron transfer since both electrodes are identical in composition and potential. However, there will be a non-zero voltage if the concentrations of the solutions are different, which can cause a flow of electrons from the more concentrated half-cell to the less concentrated half-cell until equilibrium is reached.

A concentration cell is an electrochemical cell where the two electrodes are made of the same material and are immersed in solutions with different concentrations. The standard cell potential, denoted as E°, is the difference in potential between the two half-cells under standard conditions (1 M concentration, 1 atm pressure, and 25°C temperature). In a concentration cell, both half-cells have the same standard reduction potential, so their difference (E°) will be zero.

To know more about electrochemical visit:

https://brainly.com/question/12034258

#SPJ11