A 14.0 tank contains 250 g of methane (CH4) gas at 27 atm at 298 K. Accidentally, 190 g of CO2 was added to the tank. What will be the resulting pressure of the mixture in the tank? Assume that no CH4 leaked out as the CO2 gas waa being added.
Answer:
[tex]P=34.8atm[/tex]
Explanation:
Hello!
In this case, since the tank has a constant volume as well as temperature, we would be able to compute the resulting pressure via:
[tex]P=\frac{n_TRT}{V}[/tex]
Whereas the total moles are computed by adding the moles of each gas as shown below:
[tex]n_{CH_4}=250gCH_4*\frac{1molCH_4}{16.05gCH_4}=15.6molCH_4\\\\n_{CO_2}=190g CO_2*\frac{1molCO_2}{44.01gCO_2}=4.32molCO_2\\\\n_T= 15.6molCH_4+4.32molCO_2\\\\n_T=19.9mol[/tex]
Thus, we plug in the total pressure, temperature and volume to get the resulting pressure:
[tex]P=\frac{19.9mol*0.08206\frac{atm*L}{mol*K}*298K}{14.0L}\\\\P=34.8atm[/tex]
Best regards!
How would kinetic energy of the dominoes be affected if the first domino did not hit the second one?(((20 points)))
Answer:
Not affected.
Explanation:
Kinetic energy of the dominoes not affected if the first domino did not hit the second one because no kinetic energy is lost due to no collision. If the first domino hit the second one, its kinetic energy decreases and changes in other form of energy such as heat and sound energy etc. But when there is no collision occur, then there is no change in the kinetic energy of dominoes.
QUESTION 4
How many significant figures are in the number 0.000020?
O A. 1
OB.2
O C.3
OD.4
Answer:
B) 2
Explanation:
There are two significant figures in given measurement,
2, 0
Significant figures:
1= The given measurement have four significant figures 1534.
2= All non-zero digits are consider significant figures like 1, 2, 3, 4, 5, 6, 7, 8, 9.
3= Leading zeros are not consider as a significant figures. e.g. 0.03 in this number only one significant figure present which is 3.
4= Zero between the non zero digits are consider significant like 107 consist of three significant figures.
5= The zeros at the right side e.g 2400 are also significant. There are four significant figures are present.
Based on the concept of the global conveyor belt, what happens to ocean water as it moves from Antarctica to the equator?
a It transfers thermal energy to deeper layers of the ocean.
b It becomes less dense and rises to the surface.
c It transfers thermal energy to the area, warming the equatorial waters.
d It becomes more dense and sinks to the ocean bottom.
Answer:
c
Explanation:
The ocean water transfers thermal energy to the area, warming the equatorial waters. Therefore, the correct option is option C.
What is thermal energy?In physics and engineering, the phrase "thermal energy" is thrown around in a lot of different situations. It can relate to a variety of distinct physical notions. They include radiation and a body of matter's inherent energy, also known as enthalpy.
Through means besides just thermodynamic work or the movement of matter, including such conduction, radiation, or friction, heat is energy that is moved into or out of a thermodynamic system. Heat is not a property of any single system or something that is "contained" within it; rather, it is a quantity that is transmitted across systems. Internal energy and enthalpy, on the other hand, are characteristics of a single system. The ocean water transfers thermal energy to the area, warming the equatorial waters.
Therefore, the correct option is option C.
To know more about thermal energy, here:
https://brainly.com/question/30819997
#SPJ7
at the molecular level what form of energy do the molecules have?
Answer:
kinetic energy I think so
The form of energy molecules have at the molecular level is Kinetic energy.
Kinetic energy is defined as the energy possessed by a body as a result of its motion or movement.
Molecules interact with one another through various movements that occur
within them. This happens to aid the formation of new substances in the
ecosystem. The three states of matter exhibit varying degree of movement
within its molecules.
The energy is usually in the form of chemical energy also and is the reason
why kinetic energy is the most suitable choice.
Read more on https://brainly.com/question/2627669
Iron forms both 2+ and 3+ cations. Write formulas for the oxide, sulfide, and chloride compounds of the 3+ iron cation.
Answer:
Fe2O3, Fe2S3 and FeCl3
Explanation:
The formular shows the number of atoms of element present in the compound. The number of atoms in turn depends on the charges. The goal is to have a neutral compound with oxidation number of zero.
Oxide:
Iron(Fe) has oxidation number (O.N) of +3, oxygen has O.N of -2. The formular with a balanced (Charge = 0) O.N number is; Fe2O3
Sulphide:
Iron(Fe) has oxidation number (O.N) of +3, sulphur has O.N of -2. The formular with a balanced (Charge = 0) O.N number is; Fe2S3
Chloride:
Iron(Fe) has oxidation number (O.N) of +3, chlorine has O.N of -1. The formular with a balanced (Charge = 0) O.N number is; FeCl3
(5) Use scientific notation, make the following conversions:
6.20 km to m
Answer:
6200 meters
Explanation:
To convert from km to m you have to multiply the number by a thousand
Answer:
6.2×10^3 m
Explanation:
6.20×1000=6200m
In scientific notation 6200 = 6.2×10^3
What is the name for C2I3
Answer: The correct name for the compound [tex]C_2I_3[/tex] is, Dicarbon triiodide.
Explanation:
[tex]C_2I_3[/tex] is a covalent compound because in this compound the sharing of electrons takes place between carbon and iodine.. Both the elements are non-metals. Hence, it will form covalent bond.
The naming of covalent compound is given by:
The less electronegative element is written first.
The more electronegative element is written second. Then a suffix is added with it. The suffix added is '-ide'.
If atoms of an element is greater than 1, then prefixes are added which are 'mono' for 1 atom, 'di' for 2 atoms, 'tri' for 3 atoms and so on.
Hence, the correct name for the compound [tex]C_2I_3[/tex] is, Dicarbon triiodide..
Which one of these is NOT one of the characteristics of living things?
A.All living things reproduce.
B.All living things are composed of one or more cells.
C.All living things grow develop and have life spans.
D.All living things provides heat and light on Earth.
Answer:
D. All living things provides heat and light on Earth.
Explanation:
its the sun that does that
Answer:
option d.
Explanation:
all living things provides heat and light on Earth.
What type of chemical reaction is taking place?
A. Synthesis
B. decomposition
C. single replacement
D. double replacement
double replacement
Explanation:
it's double replacement
What is public participation? Why is it
necessary for environmental conservation
Answer:
maile pani aii khojeko tmle sideko dekhya ani thicheko ani comment garya haha
What are the rows of the periodic table called?
Answer:
"The elements are arranged in seven horizontal rows,called periods or series,and 18 vertical columns,called Groups."
Explanation:
Risk*
What is the mass of 1.84 mol NaCl? Give your
answer to the correct number of significant
figures. (Molar mass of NaCl = 58.44 g/mol)
1.84 mol NaCl =
Answer:
108 g
Explanation:
Answer:
answer in picture
Explanation:
Identify the type of solid from the description. Select from the following choices: metallic solid, network solid, molecular solid, ionic solid, or amorphous solid
Identify the type of solid from the description. Select from the following choices: metallic solid, network solid, molecular solid, ionic solid, or amorphous solid. a. This solid is ductile and conducts electricity.b. This solid is not conductive and has a low melting point.
Answer:
See explanation
Explanation:
A is a Metallic Solid
Let us look again at the physical properties of metals;
Metals are
DuctileMalleableSonorousHigh melting pointConducts electricityWe can now see that both ductility and electrical conductivity are metallic properties.
B is a Molecular solid
Molecules are formed when atoms share electrons. In molecules, there are no free electrons hence molecules do not conduct electricity.
Secondly, molecules are held together in the solid state by weak dispersion forces hence molecular solids have a low melting point.
The IUPAC name of(CH3)2CHCH2CH=CH2
Answer:
4-Methyl-1-pentene
Explanation:
According to the International Union of Pure and Applied Chemistry (IUPAC), IUPAC nomenclature of organic chemistry is defined as the system of naming organic chemical compounds.
There are certain rules for naming organic chemical compounds as per IUPAC. The name of given (CH3)2CHCH2CH=CH2 will be based on the same rules.
At first find out the longest continuous chain and number the chain consecutively (preference given to double and single bonds), so numbering will start from right to left. the given chemical is 5 Carbon chain long.Then, identify the groups attached to this chain. Methyl is the only group attached to this chain at 4 Carbon.Assemble the name in alphabetical order using the full name using correct prefix and suffix.4-Methyl-1-pentene is the name of this chemical, as methyl is in 4th carbon position, Pent for 5 carbon chain and -ene (suffix) for one double bond).
Hence, the correct answer is "4-Methyl-1-pentene".
The subatomic particle that is different in isotopes
Answer:
Neutrons
Explanation:
Subatomic particles are components atoms, and they include protons, electrons and neutrons. In different isotopes of an atom, the number of neutrons that the atom contains is what changes.
I hope this helps!
What is the initial temperature under the beaker?
The initial temperature of water in the beaker is 20⁰C .
Find the volume, in Liters, of 2.5 x 1024 molecules of chlorine gas at STP.
Answer:
V = 93.0 L
Explanation:
Hello!
In this case, when computing the PVT properties for an ideal gas, we need to use the following equation:
[tex]PV=nRT[/tex]
In such a way, for 2.5 x 10²⁴ molecules of chlorine at STP (273.15 K and 1.00 atm) we first need the moles based on the Avogadro's number:
[tex]n = 2.5x10^{24}molec*\frac{1mol}{6.022x10^{23}molec} = 4.15mol[/tex]
Now, we solve for volume on the ideal gas equation to obtain:
[tex]V=\frac{nRT}{P}[/tex]
So we plug in and get:
[tex]V=\frac{4.15mol**0.08206\frac{atm*L}{mol*K}*273.15K}{1.00atm}\\\\V=93.0L[/tex]
Best regards!
Which process creates two new cells from one existing cell in order to maintain homeostasis? (4 points) a Cell division b Cellular respiration c Photosynthesis d Reparation
Answer:
Cell division.
Explanation:
Consider this reaction: HCO3− + H2S → H2CO3 + HS−
Which is the conjugate acid?
H2S
HCO3-
HS–
H2CO3
The conjugate acid : H₂CO₃
Further explanationGiven
Reaction
HCO₃− + H₂S → H₂CO₃ + HS−
Required
The conjugate acid
Solution
Bronsted-Lowry
Acid ⇒ H⁺ + conjugate base
Bases + H⁺⇒ conjugate acids
Acid and conjugate base : H₂S and HS−
Base and conjugate acid : HCO₃− and H₂CO₃
H₂S gives (H⁺), then the remaining acid is a conjugate base HS−
HCO₃− receives (H +), then the conjugate acid H₂CO₃
Answer:
The correct answer is D.
Explanation:
Edge'21
The United States National Weather Service reports pressure in mm of Hg. What's the pressure of 725 mmHg in Pa, millibars, and Torr?
A. 101.325 Pa, 966 millibar, 725 Torr
B. 100,000 Pa, 1000 millibar, 760 Torr
C. 96,657 Pa, 966 millibar, 725 Torr
D.100.000 Pa, 760 millibar. 725 Torr
Answer:
C. 96,657 Pa, 966 millibar, 725 Torr
Explanation:
The pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.
What is pressure?Pressure is defined as the force that is applied perpendicularly to an object's surface in relation to the area that it is dispersed over. Pressure can actually be a very good thing. Stress only occurs and has a fully negative impact when it continues to grow and that sensation of serenity and order is replaced with one of being out of control.
Given pressure = 725 mmHg
1 mmHg = 133.32 Pa
725 mmHg = 133.32 x 725 Pa
= 96,657 Pa
1 mmHg = 1.333 millibar
725 mmHg = 725 x 1.333 millibar
= 966 millibar
1 mmHg = 1 torr
725 mmHg = 725 Torr
Thus, the pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.
To learn more about pressure, refer to the link below:
https://brainly.com/question/15175692
#SPJ2
What element corresponds to period 5, group 2
Answer:
Strontium is the second element placed in the 5th period
Hope this will help you if not so advance sorry :)
Air masses carry their own weather.
True
False
The question is number 8
A solution is made by mixing 49.g of chloroform CHCl3 and 73.g of acetyl bromide CH3COBr. Calculate the mole fraction of chloroform in this solution. Round your answer to 2 significant digits.
Answer: The mole fraction of chloroform in this solution is 0.41
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
a) moles of [tex]CHCl_3[/tex]
[tex]\text{Number of moles}=\frac{49g}{119g/mol}=0.41moles[/tex]
b) moles of [tex]CH_3COBr[/tex]
[tex]\text{Number of moles}=\frac{73g}{123g/mol}=0.59moles[/tex]
To calculate the mole fraction, we use the formula:
[tex]\text{Mole fraction of a component}=\frac{\text{Moles of the component}}{\text{total moles}}[/tex]
[tex]\text{Mole fraction of chloroform}=\frac{\text{Moles of chloroform}}{\text{total moles}}=\frac{0.41}{0.41+0.59}=0.41[/tex]
The mole fraction of chloroform in this solution is 0.41
(I will give a brainliest) What must be changed, temperature or heat during condensation?
Answer: Temperature
Explanation:
Answer: Temperature
Explanation: can i get brainliest plss
A certain chemical reaction releases of heat for each gram of reactant consumed. How can you calculate what mass of reactant will produce of heat
Answer:
Specific heat capacity formula
Explanation:
The heat capacity gives the exact heat energy at which a given mass of a substance is heated from one temperature to another.
This formula can help determine how much heat is gained or lost during the reaction and is given by:
Q = mcΔT
where:
Q = heat energy in Joules or Calories
m - mass of the substance (g)
c = Specific heat capacity (J/kg°C)
ΔT = change in temperature = (final temp - initial temp) (°C)
I hope this was helpful.
MULTIPLE CHOICE QUESTION
If
you are warming yourself near the
campfire, you are experiencing heat
transfer from the fire, through:
Convection
Conduction
Radiation
Answer:
radiation
Explanation:
c5h12 compound name
Which of the following are examples of chemical energy being released or stored?
I. A car battery reacting and releasing energy
II. A girl eating a sandwich which helps her move
III. Propane burning on a barbecue
Answer:
it is all of the above
Explanation:
if an atom with a mass number of 27 has 14 neutrons,it is an isotope of which element
Answer:
the number of neutrons in above isotope = A - Z = 27 - 13 = 14. Note: The molar mass of aluminium, which is average of atomic masses of all isotopes = 26.981538 g/mol, since 13Al27 is the major isotope.
Explanation:
Answer:
Aluminum
Explanation
mass number = number of protons + number of neutrons
Number of protons = mass number - number of neutrons
No of protons = 27-14 = 13
Aluminum contains 13 protons