According to the given statement The molarity of the iron(II) solution is 0.648 M.
What is molarity?The amount of the sample in a specific solution volume is defined as its molarity (M). The molarity of a solute per litre of a solution is known as molarity. The molar concentration is yet another name for molarity.
Briefing:Iron(II) solution volume (V₁) = 25.0 mL/0.025 L
Dichromate solution (V₂) has a volume of 18.0 mL, or 0.018 L.
Dichromate solution molarity (M₂) = 0.150 M
Molarity of dichromate solution is :
M₂ = n₂/V₂
(n₂ = M₂* V₂ = 0.150 * 0.018 = 2.7 * 10⁻³ mol
Complete balanced equation is given below.
[tex]6 \mathrm{Fe}^{2+}(a q)+\mathrm{Cr}_2 \mathrm{O}_7^{2-}(a q)+14 \mathrm{H}^{+}(a q) \rightarrow 6 \mathrm{Fe}^{3+}(a q)+2 \mathrm{Cr}^{3+}(a q)+7 \mathrm{H}_2 \mathrm{O}[/tex]
It is obvious from the equation that 1 mole of dichromate is needed to make 6 moles of iron(II) solution.
Therefore, we calculate the number of moles of iron(II) solution using the unitary technique.
1 mole of dichromate is equal to 6 moles of iron (II)
6n₂ moles of iron are equal to n₂ moles of dichromate (II)
=6 * 2.7 * 10⁻³ = 0.0162 mol Fe²⁺
So, 0.0162 moles of iron(II) is needed. Therefore,
Now, molarity of iron(II) solution is given as: n[tex]_1[/tex] = 0.0162
Molarity = Moles ÷ Volume
M₁ = n[tex]_1[/tex]/V₁
M₁ = 0.0162mol/0.025 L = 0.648 M
The molarity of the iron(II) solution is 0.648 M.
To know more about Molarity visit:
https://brainly.com/question/8732513
#SPJ4
The complete question is -
The titration of 25.0 mL of an iron(II) solution required 18.0 mL of a 0.150M solution of dichromate to reach the equivalence point. What is the molarity of the iron(II) solution?
please help
could you measure the volume of an object with a cube shape using the overflow can explain your answer.
The volume of this cube-shaped area can be calculated by multiplying its length, width, and height i.e. length x width x height.
What is volume?Volume is defined as the area that any three-dimensional solid takes up. The shapes of these solids include cubes, cuboids, cones, cylinders, and spheres.
The cubic meter serves as its equivalent in the International System of Units. Given that it can be computed using lengths, it is not regarded as a fundamental unit of the SI. The liter is the most widely used measurement.
The cube's volume is equal to the edge's length raised by three.
Thus, the volume of this cube-shaped area can be calculated by multiplying its length, width, and height i.e. length x width x height.
To learn more about volume, refer to the link below:
https://brainly.com/question/1578538
#SPJ1
Help me to balance this equation please
Answer:
H202(aq)+2Fe2+(aq)+2H+=>2fe3+(aq)+2H20(l)
Explanation:
H202(aq)+2Fe2+(aq)+2H+=>2fe3+(aq)+2H20(l)
H202(aq)+2Fe2+(aq)+2H+=>2fe3+(aq)+2H20(l)
A certain atom contains 53 protons, 78 neutrons, and 54 electrons. What is the mass number of this atom?.
The mass number of an atom that has 53 protons, 78 neutrons, and 54 electrons would be 131.
A mass number can be described as the sum total of the number of protons and neutrons that are contained within the nucleus of an atom.
If we want to calculate the mass number of an atom, we need to add the number of neutrons present inside the atoms with the number of protons present inside the atom.
As mentioned in the question, the number of protons inside the said atom is 53 whereas the number of neutrons is 78. Hence,
53+78= 131
To learn more about mass number, click here:
brainly.com/question/28409714
#SPJ4
n the laboratory you dilute 4.49 ml of a concentrated 12.0 m nitric acid solution to a total volume of 150 ml. what is the concentration of the dilute solution?
The concentration of the dilute solution is 0.3592 M.
Concentration, or the amount of solute in a solution, can either be expressed in molarity, M, moles of solute per liter of solution, or molality, m, moles of solute per kilogram of solution.
If the concentrated nitric acid solution is 12.0 M, then there are 12.0 moles nitric acid per liter of solution.
For a 4.49 ml of a concentrated 12.0 M nitric acid solution, the number of moles is 0.05388.
M = moles of solute / volume of solution
moles = 12.0 M(4.49 ml)(1 L / 1000 ml)
moles = 0.05388 moles nitric acid
If the total volume is 150 ml, then the concentration of the diluted solution is
M = moles of solute / volume of solution
M = 0.05388 moles nitric acid / 150 mL (1 L / 1000 ml)
M = 0.3592
Learn more about molarity here: https://brainly.com/question/23243759
#SPJ4
Which element has 2 valence electrons and 5 energy levels?
Answer:
its Boron i hope this helped.
Explanation:
waste water treatment often has at least one oxidation-reduction step. in the collection of waste water, chlorine can be added to control corrosion by hydrogen sulfide to give sulfur and chloride ions. what is the balanced equation for the reaction that occurs in this step? include physical states in your answer.
The balanced reaction equation for this redox reaction looks like this:
H₂S(aq) + Cl₂(g) → S(s) + 2HCl(aq)
First, we write what we know about the reaction:
Hydrogen sulfide (H₂S) that is dissolved in the wastewater (so the physical state is (aq)) is reacting with gaseous chlorine (so Cl₂(g)) to form sulfur (which is solid at room temperature, and does not dissolve in water, so S(g)) and chloride ions (Cl⁻). To counter their negative charge, we add the hydrogen from H₂S to chlorides, which results in HCl, which is soluble in water, so the physical state is (aq):
H₂S(aq) + Cl₂(g) → S(s) + HCl(aq)
When we look at this equation we can see that it is not balanced, because we have 2 H atoms and 2 Cl atoms on the left, and only 1 of both on the right. The easiest way to rectify this is to add "2" in front of HCl, resulting in a balanced reaction equation:
H₂S(aq) + Cl₂(g) → S(s) + 2HCl(aq)
You can learn more about balanced reaction equations here:
brainly.com/question/22064431
#SPJ4
is CL3 a compound element or mixture
Answer:
Elements
Explanation:
I'll assume that the correct element symbol is Cl, not CL. CL would mean a compound made up of one carbon (C) and one Unknown element (L), Cl means chlorine.
I aslo wonder if the compound is [tex]Cl_{2}[/tex] and not [tex]Cl_{3}[/tex]. Regardless, both would be elements. A compound is made up of 2 or more different elements. A mixture is 2 or more compounds.
3.23x106 kJ to kcal
Express the value in kilogploring to three significant figures
help me please!
Hence 3.23×10⁶kJ = 771970 kilo calorie.
What is kilo joule?Kilo joule is a unit of energy that is equal to 1000 joules.
1 kilojoule is equal to 1000 joules:
∵ 1kJ = 0.239kcal
∴ 3.23×10⁶kJ = 3.23×10⁶ × 0.239
= 771970 kcal
To know more about kilo Joule please visit:
https://brainly.com/question/16598961
#SPJ13
3.4 x 10^23 atoms of potassium to grams
To solve this problem, we must take into account Avogadro's number. Avogadro's number tells us that in one mole of any substance there are 6.022x10^23 atoms. Applying this relationship we have that the moles of potassium (K) are:
[tex]\begin{gathered} molK=givenatomsK\times\frac{1molK}{6.022\times10^{23}atoms} \\ \end{gathered}[/tex][tex]\begin{gathered} molK=3.4\times10^{23}atomsK\times\frac{1molK}{6.022\times10^{23}atoms} \\ molK=0.6molK \end{gathered}[/tex]Now, to go from moles to grams, we must multiply the moles by the molar mass of potassium. The molar mass of potassium is 39.1g/mol. So, the grams of potassium will be:
[tex]gK=givenmolK\times\frac{MolarMass,gK}{1molK}[/tex][tex]\begin{gathered} gK=0.6molK\times\frac{39.1gK}{1molK} \\ gK=22.1gK \end{gathered}[/tex]Answer: In 3.4x10^23 atoms of potassium there are 22.1 grams
9. running a strong enough electric current through water will cause it to decompose into hydrogen and oxygen gas. write the balanced chemical equation for this process. what is being oxidized, and what is being reduced?
Answer:
Explanation: when electric current is passed through water, water dissociates into hydrogen and oxygen. Hydrogen is deposited over negative pole and oxygen is deposited over positive pole. Deposition of hydrogen and oxygen at different poles is visible in the form of bubbles.
a compound is found to contain 13.65 % carbon and 86.35 % fluorine by mass. what is the empirical formula for this compound? to answer the question, enter the elements in the order presented above.
Answer:
[tex]CF_{4}[/tex]
Explanation:
See attached worksheet
according to laplace's law: group of answer choices should remain inflated because the pressure inside of the alveoli is greater than atmospheric pressure should remain in a stable state should increase gas exchange during inhalation
According to Laplace's law lungs should remain inflated because the pressure inside of the alveoli is greater than atmospheric pressure.
According to this law of Laplace, if the radius of the blood vessel is larger than the wall tension required will be larger in order to withstand or overcome the pressure which is exerted by internal fluids or gases.
The alveoli are to remain inflated as the gaseous pressure which is developed inside the alveoli is greater than the pressure of atmosphere.
When the blood vessel thickens or its thickness increases, it will result in the reduction of the tension developed by the gas at a given constant pressure.
It was published in a research paper that according to law of Laplace, lung should remain inflated because air pressure in alveoli is more than the pressure of the atmosphere.
To learn more about Laplace law,
brainly.com/question/14450152
#SPJ1
preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 100g + 10g
b) 903cm x 10cm
c) 0.6030 cm(2) ÷ 0.1cm
d) 9.5 mm + 0.083 mm
e) 430.0 mL - 10.2111 mL
f) 762.4 m + 3.2m + 1.21m
Preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 110 g
b) 9030 cm
c) 6.0 cm
d)9.6 mm
e) 419.8 mL
f) 766.8 m
a) 100 g + 10 g = 110g
b) 903 cm × 10 cm = 9030 cm
c) 0.6030 cm² / 0.1 cm = 6.0 cm
here lowest significant is = 0.1 , so ans will round off till first decimal.
d) 9.5 mm + 0.083 mm = 9.583 mm = 9.6 mm
e) 430.0 mL -10.2111 mL = 419.8 mL
f) 762.4 m + 3.2 m + 1.21 m = 766.8 m
here the lowest significant figure = 3.2 , so the ans will be round off to first decimal figure.
Thus, preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 110 g
b) 9030 cm
c) 6.0 cm
d)9.6 mm
e) 419.8 mL
f) 766.8 m
To learn more about significant figure here
https://brainly.com/question/17396594
#SPJ1
2h2(g)+O2(g)----> 2H2O(g)
How any moles of o2 are required to react with 2 moles of H2
The number of moles of [tex]O_2[/tex] required to react with 2 moles of [tex]H_2[/tex] according to the reaction will be 4 moles.
Stoichiometric problemFrom the balanced equation of the reaction:
[tex]2H_2 (g) + O_2 (g) -- > 2H_2O (g)[/tex]
The mole ratio of hydrogen to oxygen is 2:1. This means that for every 1 mole of hydrogen that reacts to form 1 mole of water, 0.5 moles of oxygen is required. Also, for every 1 mole of oxygen, 2 moles of hydrogen are required.
Once the mole of hydrogen increases, the mole of oxygen also has to increase proportionately. Otherwise, oxygen becomes limited in availability, and hydrogen will be in excess.
From the equation of the reaction, 1 mole of oxygen requires 2 moles of hydrogen. Thus, with 2 moles of oxygen, 4 moles of hydrogen will be needed for a complete reaction.
In summary, the number of moles of [tex]O_2[/tex] that are required to react with 2 moles of [tex]H_2[/tex] is 4 moles.
More on stoichiometric problems can be found here: https://brainly.com/question/15047541
#SPJ1
is the process of mixing ethanol and water exothermic or endothermic? how do you know (use numeric data to justify)? does this suggest presence of large clusters or small clusters in the mixture?
The reaction is exothermic as it involves a bond-forming process
when the liquids are mixed temperature of the reaction between the mixture increases.
There are small and large clusters in the mixture
The exothermic reaction involves the formation of new bonds which involves a combination of the bonds to form a new compound in our case water has hydroxy ions that bond with those of ethanol.
Mixing ethanol and water in volumetric glassware reduces the volume and increases the temperature.
The numerical example
Fill two 250 mL graduated cylinders to the line with water and ethanol pure temperature sensor shows both at room temperature. Next, move the temperature probe to an empty 500 mL graduated cylinder and pour the contents of the two smaller cylinders simultaneously and mix well.
The temperature of the mixture will rise by about 8 °C and the volume will decrease to 480 this indicates that the reaction is exothermic as the temperature rises and volume reduces
yes, clusters are present as ethanol falls between the spaces left by water as it has small molecules than that of water.
To learn more about ethanol and water reactions see https://brainly.com/question/1206318?referrer=searchResults:
#SJP4
You examined the effects of heat on equilibrium in part iv. Was the reaction you observed endo- or exo- thermic? does heat act as a reactant or product? what happened when you removed heat by placing the solution in the ice bath? what would you expect to happen if you were to add heat?.
1) The reaction is exothermic and heat is a product
2) The color would turn to pink.
What is an endothermic reaction?Let us recall that an endothermic reaction is one in which the increase in the temperature of the system would drive the forward reaction. This implies that the equilibrium would shift to the right when the set up is heated. Since the color of the solution changes to blue when heated hence the reaction is exothermic.
If you removed heat by placing the solution in the ice bath, we can see that we have removed the heat thus we expect that the reverse reaction would take place and the color would change to pink.
Learn ore about exothermic reaction:https://brainly.com/question/10373907
#SPJ1
Consider the hydrate calcium chloride dihydrate: cacl2 · 2h2o. how many hydrogen atoms are in the compound?
Consider the hydrate calcium chloride dihydrate hydrogen atoms are in the compound are four
Hydrate calcium chloride dihydrate is the excellent water soluble crystalline calcium sources used compatible with chloride and chloride compounds can conduct electricity when fused or dissolved in water and here given compound is CaCl₂ × 2H₂O
So in that compound the hydrogen atom are four because this compound or this equation is balanced so in that compound four hydrogen atom are present
Know more about hydrogen
https://brainly.com/question/13954550
#SPJ1
Answer:
4
Explanation:
Which of the following provides the best evidence that organ systems in the human body interact with one another
The best evidence that organ systems in the human body interact with one another is shivering in response to sensing in the cold environment
Organ system is the group of tissue that work together for the overall function of organ and also organ system is the group of organ that work together to perform a specific function and the human organ consist of eleven organ system and that is respiratory, execratory, circulatory, digestive etc and the best evidence that organ systems in the human body interact with one another is shivering in response to sensing in the cold environment because when your muscle and skeletal system are working to help your body increase heat when shivering
Know more about human body
https://brainly.com/question/8952492
#SPJ1
elemental sulfur can be converted to sulfur trioxide by reaction with oxygen in the presence of a catalyst. upon addition of water, sulfuric acid is produced as represented by the equation: s8 12 o2 8 h2o 8 h2so4 what minimum mass of sulfur , in grams, is needed to prepare 17.5 g of h2so4? (give the number with one digit after decimal point; no units)
The minimum mass of sulphur , in grams, needed to prepare 17.5 g of [tex]H_{2} So_{4}[/tex]is 53.5 gram
The molecular mass of eight molecules of sulphuric acid is 784 grams.
So 256 grams of sulphur makes 784 grams of sulphuric acid
That means 17.5 grams of sulphur can give
[tex]\frac{784}{256}[/tex] ×17.5 grams of sulphuric acid
And by solving this we get 53.5 grams.
That's how we determined the required grams of sulphur in grams.
The mass of a given molecule is its molecular mass (m), which is expressed in daltons. Because they contain various isotopes of an element, different molecules of the same compound can have distinct molecular masses. According to IUPAC, the related quantity relative molecular mass is a unitless comparison between the mass of a molecule and the unified atomic mass unit (also called the dalton).
The molar mass, which is expressed in g/mol, is defined as the mass of a given substance divided by the amount of a substance. That makes the molar mass an average of many particles or molecules, and the molecular mass the mass of one specific particle or molecule.
To know more about molecule mass visit
https://brainly.com/question/14122402
#SPJ4
unit 3 balancing lab chemistry
HELP PLEASEEEEEEE
1. zn___AgCI->___ZnCI2+___Ag
2. FeCI3+___H2s->___FeCI2+___HCI+___s
3. ___Ag2O->___Ag+___O2
4.AI2O3->___AI+___O2
5.K+___H2O->___KOH+___H2
6. Caco3->___CaO+___CO2
7. MG+___O2->Mgo
8. CO+___Fe2O3->___Fe+___CO2
9. H2+___Fe2O3->___Fe+___H2O
10. ___HCI+ZN->___H2+___ZnCI2
zn + 2 AgCI-> ZnCI2+ 2Ag
2 FeCI3+ 3 H2s->___FeCI2+ 6 HCI+___s
2 Ag2O-> 4 Ag+ O2
4AI2O3-> 3 AI+ 2O2
2 K+ 2H2O-> 2 KOH+ H2
Caco3-> CaO+ CO2
2 MG+ O2-> 2MgO
CO+ 3 Fe2O3-> 2 Fe+ 3CO2
2 H2+ 3 Fe2O3-> Fe+ 3H2O
HCI+ 2 ZN-> H2+ ZnCI2
enintlchemicalaidcom
problems of using ionic compound and covalent compound in industry
Answer:
Problems of Using Ionic and Covalent Compounds in Medicine
Stomach pain.
Nausea.
Vomiting.
Heartburn.
Gas.
Constipation.
Diarrhea.
Continental crust layer of blank which forms the blank
which of these is not a product of the nuclear reactions inside the sun known as the proton-proton chain? helium nuclei polycyclic aromatic hydrocarbon molecules antimatter (positrons) neutrinos
The fusion of hydrogen nuclei into helium nuclei in the solar core is how the Sun obtains its energy. The proton-proton chain, a series of nuclear fusion processes, describes this hydrogen burning.
Protons, which are just single hydrogen atoms, are the starting point of this process inside the sun. Through a series of stages, these protons fuse together to form helium. This fusion process takes place in the sun's core, and the energy released as a result of transmutation maintains the sun's hot.
A deuterium (2H) nucleus is created from two protons in the first step of the hydrogen fusion process, along with an antielectron and a neutrino.
Four hydrogen protons and two electrons are used in the basic hydrogen fusion cycle, which results in the creation of a helium nucleus, two neutrinos, and six photons.
Learn more about proton-proton chain reaction here:
https://brainly.com/question/11736501
#SPJ1
What do all waves have in common?
you can always see them
They carry energy
They absorb light
They do not carry energy
''They carry energy''. is the right statement about waves.
What are a wave and its types?A wave is defined as a disturbance in a medium that carries energy without any movement of particles. It may take elastic deformation, a variation of pressure, electric intensity, magnetic intensity, electric potential, and temperature. There are three types of waves i.e. matter waves, mechanical waves, and electromagnetic waves.
All types of waves have the same basic properties of reflection, refraction, diffraction, and interference. All waves have a wavelength, frequency, speed, and amplitude. A wave can be explained by its length, amplitude, and frequency. All waves transfer energy from one place to another, they can also be reflected as well as refracted.
So we can conclude that option A is the right answer about the waves.
Learn more about wave here: https://brainly.com/question/19036728
#SPJ1
Which of the following diagrams has correctly shaded the metals in blue?
1) Groups of elements in the periodic table.
Metals are located in the middle and left side of the periodic table.
The second picture has correctly shaded the metals.
.
7. if 45.52 ml of a potassium permanganate solution is needed to titrate 2.145 g of iron(ii) ammonium sulfate hexahydrate, calculate the molarity of the kmno4 solution.
The molarity of a solution is calculated from the number of moles of solute and the volume of solution in liters. The molarity of potassium permanganate solution 2.145 g of iron(ii) ammonium sulfate hexahydrate is 0.121 M.
What is molarity ?Molarity is used to represent the concentration of a solution. It is the ratio of number of moles of solute to the volume of solution in litres. Molarity depends on the temperature also.
The number of moles of a solute can be calculated from the molar mass and taken weight of the solute.
The molar mass of iron(ii) ammonium sulfate hexahydrate = 392.1 g/mol
Taken weight of solute = 2.145 g.
Therefore, the number of moles of iron(ii) ammonium sulfate hexahydrate = 2.145 / 392.1
= 0.0054 moles.
Now, the molarity of the solution is calculated as follows:
Molarity of solution =( no.of moles of iron(ii) ammonium sulfate hexahydrate ) / volume
= 0.0054 /0.045 L
= 0.121 M
Hence, The molarity of potassium permanganate solution 2.145 g of iron(ii) ammonium sulfate hexahydrate is 0.121 M.
To find more about molarity, refer the link below:
https://brainly.com/question/2817451
#SPJ1
Please help me with this Chemistry problem..
A particular compound has an enthalpy of vaporization of 28900 J/mol. At 278 K it has a vapor pressure of 103 mmHg. What is its vapor pressure at 309 K? (R = 8.31 J/(K· mol))a. 29.4mmhgb. 99.5mmhgc. 107mmhgd. 194mmhge. 361mmhg
Answer:
[tex]E\text{ : 361 mmHg}[/tex]Explanation:
Here, we want to get the vapour pressure of the compound at the given temperature
We can use the Clausius-Clapeyron equation for this
Mathematically, we have this as:
[tex]\ln (\frac{P_1}{P_2})\text{ = -}\frac{\Delta H}{R}(\frac{1}{T_1}-\frac{1}{T_2})[/tex]So,let us identify the values:
P1 = 103 mmHg
P2 = ?
ΔH = 28,900
R = 8.31
T1 = 278 K
T2 = 309 K
We now proceed to substitute these values into the equation above as follows:
[tex]\begin{gathered} \ln (\frac{103}{P_2})\text{ = -}\frac{28900}{8.31}(\frac{1}{278}-\frac{1}{309}) \\ \\ \ln (\frac{103}{P_2})\text{ = -3477.74 (}\frac{31}{85902}) \\ \\ \ln (\frac{103}{P_2})\text{ = -1.255} \\ \\ e^{-1.255}\text{ = }\frac{103}{P_2} \\ P_2\text{ = 361 mmHg} \end{gathered}[/tex]why was it important to use a volumetric pipette and volumetric flasks (instead of some other glassware, for example, a graduated cylinder, etc.) for the preparation of all solutions in this procedure?
It is important to use a volumetric pipette and volumetric flasks because they are marked with one trace, they are calibrated and there are very less chance of error in them.
The percentage error of volumetric flask is very low at 0.3%. Volumetric pipette and volumetric flasks are specially designed to give accurate measurements of liquids and make them suitable for preparing standard solutions.
The volumetric pipette has a long and narrow neck which makes it easier to measure.
Graduated cylinders are more accurate then beakers. However they are not used to carry volumetric evaluations for this purpose volumetric tools like flasks and pipettes are used because they are more accurate and exact.
To know more about Volumetric flask and Pipette click here
brainly.com/question/5897608
#SPJ4
a buffer contains equal amounts of a weak acid and conjugate base and has a ph of 5.25. how will the concentration of conjugate base in the buffer change after the addition of a small amount of strong base?
The concentration of conjugate base in the buffer change after the addition of a small amount of strong base The concentration of conjugate base will increase. HA+BOH ⇒ H2O +AB
Buffer capacity refers to the amount of added acid or base that can be neutralized by a buffer. This is determined by the concentration of the conjugate acid and conjugate base. As these concentrations increase, the buffering capacity increases. A buffer is a solution that can withstand changes in pH due to the addition of acidic or basic components.
Can neutralize small amounts of added acids or bases and keep the pH of the solution relatively stable. When a strong base is added to a buffer the hydroxide ions are consumed by the weak acid, forming water, and consumed by the weak conjugate base of the acid. The number of weak acids decreases and the number of conjugate bases increases.
Learn more about The concentration here:-https://brainly.com/question/17206790
#SPJ4