The acceleration of a train that increases its velocity from 10.0 m/s to 15.0 m/s in 2.90 seconds is _____ m/s^2.

The formula to convert the speed given in meter per second to kilometer per hour is m/s = 18/5 km/h.

The formula to convert the speed of kilometers per hour into the meters per second can be found as,

Let us say,

S km/h is the speed of the object, If we simply just put the value of the distance and time in the required quantity, we will get our results. so, we will put,

1 km = 1000 m.

1 hour = 3600 seconds.

S km/h = S 1000/3600 m/s

S km/h = S 5/18 m/s

18/5 km/h = m/s

So, the speed of the object can be converted by using the formula, 18/5 km/s = m/s.

To know more about speed, visit,

https://brainly.com/question/13943409

#SPJ4

The parametric equation for the line of sight between the tanks can be represented as: x(t) = 385 + 410t, y(t) = 870 - 245t, z(t) = 567 + 30t

The line of sight between two points can be represented as a vector that starts at one point and ends at the other point. To find the parametric equation of the line of sight, we can subtract the starting point from the ending point to find the direction vector and then add it to a starting point multiplied by the parameter 't'.

Given that tank A is positioned at point (385, 870, 567) and tank B is positioned at point (795, 625, 597), the direction vector can be calculated as follows:

(795, 625, 597) - (385, 870, 567) = (410, -245, 30)

x(t) = 385 + 410t,

y(t) = 870 - 245t

z(t) = 567 + 30t

The parameter 't' can have any real value and determines the position along the line of sight.

To know more about parametric equation, here

https://brainly.com/question/29145287

#SPJ4

The mesh current method, also known as mesh analysis, is a technique for solving planar circuits for currents (and, indirectly, voltages) at any point in the electrical circuit.

To learn more about mesh current refer to:

https://brainly.com/question/28192863

#SPJ4

true, The rate at which a fluid deforms in response to a shear stress is referred to as its dynamic viscosity. It is a measurement of a fluid's resistance to deformation, and the Greek letter mu () is frequently used to represent it.

Absolute viscosity, commonly referred to as dynamic viscosity, is a measurement of a fluid's flow resistance. The amount of internal friction that a fluid possesses dictates how much force is necessary to move the fluid; this is a characteristic of the fluid. The amount of internal friction and force needed to move a fluid increases with its viscosity. The Greek letter mu () is frequently used to represent dynamic viscosity, which is quantified in units called pascal-seconds (Pas). It depends on temperature and pressure, and it may be influenced by things like the presence of suspended particles, dissolved gases, and fluid flow velocity. Pressure decreases may be calculated using dynamic viscosity.

learn more about dynamic viscosity here:

https://brainly.com/question/30264313

#SPJ4

A linear spring with a spring constant of 77.2 N/m would be the best choice to most closely reach the targeted launch speed of 12.6 m/s.

To calculate the spring constant needed to reach the target launch speed, and determine the elastic potential energy stored in the spring. This is equal to the spring constant multiplied by the square of the displacement of the spring E = 1/2 kx². We then use this value to calculate the kinetic energy of the object at launch KE = 1/2 mv². Finally, we can use the conservation of energy to solve for the spring constant k = 2(KE)/x².

In this problem, the mass of the object is 1 kg. The target launch speed is 12.6m/s. Putting these values into the equation above, we can calculate the spring constant needed to reach the target launch speed,

k = 2(1/2 (1) (12.6²)) / (1²)

k = 77.2 N/m

To know more about springs:

https://brainly.com/question/30294382

#SPJ4

The position and velocity of the particle are [tex]x(t) = 2t^2 + 24[/tex] and [tex]v(t) = 4t[/tex]

The problem states that the acceleration of a particle is directly proportional to the square of the time, which means that the equation for acceleration (a) is of the form [tex]a = k*t^2[/tex], where k is a constant.

Given that the position of the particle at t = 0 is x = 24m, we can use this to find the initial velocity (v0) using the equation: [tex]x = x0 + v0t + 1/2a*t^2[/tex].

Since we know that x = 24m at t = 0, we can substitute these values into the equation and get:

[tex]24 = 24 + v00 + 1/2k*0^2[/tex]

This simplifies to v0 = 0.

Now, we can use the information that at t = 6s, x = 96m and v = 18m/s to find the value of k. We know that [tex]x = x0 + v0t + 1/2at^2[/tex] and v = v0 + at.

So we can substitute these values into the equation and get:

[tex]96 = 24 + 0 + 1/2k6^2 = 24 + 1/2k36[/tex]

18 = 0 + k*6

Solving the above two equations, we get k = 4.

So the equation for acceleration is [tex]a = 4*t^2[/tex].

We can use this equation to find the equations for position and velocity by using the following formulas:

[tex]x(t) = x0 + v0t + 1/2at^2[/tex]

[tex]v(t) = v0 + at[/tex]

Substituting the values we know, we get:

[tex]x(t) = 24 + 0 + 1/2*(4t^2) = 2t^2 + 24[/tex]

[tex]v(t) = 0 + 4t = 4t[/tex]

So, the position and velocity of the particle are given by [tex]x(t) = 2t^2 + 24[/tex]and [tex]v(t) = 4t[/tex] respectively.

To learn more problems on position and velocity:

https://brainly.com/question/14298562

#SPJ4

The  fundamental frequency of the String is 177.42 Hz.

Given,

The Tension (T) in the String is 765 N.

Steel wire length (L) is 0.900 m

Mass of the string (m) is 6.75 g = 6.75 * 10^-3 kg.

Frequency of the string = n *(Velocity of the wave on the String/(2L) )

Velocity of the wave on the string  is : V = [tex]\sqrt{\frac{T}{m/L} }[/tex]

Putting  these values in above equation we get : V = 319.37 m/s

For Fundamental Frequency n = 1

Frequency = V / 2L

f = 319.37 / (2*0.9)

f = 177.42 Hz

So, the  fundamental frequency of the String is 177.42 Hz.\

To know more about frequency visit;

https://brainly.com/question/9077138

#SPJ4

Press Alt and 0176 on your keyboard. Please take note that this technique only functions on keyboard shortcut with a 10-key numeric pad.

To learn more about keyboard shortcut from the given link

https://brainly.com/question/12531147

#SPJ1

The clearest example of what Erik Erikson believed a person might go through in early adulthood Mohammed has tried dating a few times but has not had much luck, so he has decided to give it up.

The way in which Erikson's theory handled development over the lifetime, including old age, set it apart from many others. We are driven to investigate intimate connections as young people because we want to build our own relationships. Young adulthood, the sixth stage in Erikson's theory of psychosocial development, occurs between the ages of 18 and 40. The clearest example of what Erik Erikson believed a person might go through in early adulthood Mohammed has tried dating a few times but has not had much luck, so he has given up.

Learn more about Adulthood

brainly.com/question/10477610

#SPJ4

The statement about crate that is true is that D. The crate will not move.

Force is any interaction that, when unopposed, will change the motion of an object. The maximum force that static friction can exert on the crate is

μsFN = μsFw =

μs mg = (0.4)(100 kg)(10 N/kg)

= 400 N

Since the force applied to the crate is only 344 N, static friction is able to apply that same magnitude of force on the crate, keeping it stationary. [B is incorrect because the static friction force is not the reaction force to F; both F and Ff (static) act on the same object (the crate) and therefore cannot form an action/reaction pair.]

To learn more about force check the link below:

https://brainly.com/question/12785175

#SPJ4

Complete question: A crate of mass 100 kg is at rest on a horizontal floor. The coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. A force F of magnitude 344 N is then applied to the crate, parallel to the floor. Which of the following is true?

A. The crate will accelerate across the floor at 0.5 m/s2.

B. The static friction force, which is the reaction force to F as guaranteed by Newton’s third law, will also have a magnitude of 344 N.

C. The crate will slide across the floor at a constant speed of 0.5 m/s.

D. The crate will not move.

E. None of the above

Hence option D is the correct choice.

The right statement is that the crate won't move.

Any interaction that alters an object's motion while it is unopposed is referred to as force. The crate can only withstand a maximum force of static friction of

μsFN = μsFw =

μs mg = (0.4)(100 kg)(10 N/kg)

= 400 N

The box is subjected to a force of just 344 N, therefore static friction may exert the same force, holding the crate immobile. [B is erroneous since F and Ff (static) operate on the same object, the crate, and so cannot form an action/reaction pair. F and Ff (static) are not the response force to F.]

For such more question on crate

https://brainly.com/question/15262937

#SPJ4

Note: The correct question would be as bellow,

A crate of mass 100 kg is at rest on a horizontal floor. The coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. A force F of magnitude 344 N is then applied to the crate, parallel to the floor. Which of the following is true?

A. The crate will accelerate across the floor at 0.5 m/s2.

B. The static friction force, which is the reaction force to F as guaranteed by Newton’s third law, will also have a magnitude of 344 N.

C. The crate will slide across the floor at a constant speed of 0.5 m/s.

D. The crate will not move.

E. None of the above

The given statement is true.

To know more about electricity visit:

https://brainly.com/question/14681756

#SPJ4

A heat engine is in violation of the second rule of thermodynamics if it claims to have a thermal efficiency higher than the Carnot efficiency.

Energy is characterized as having the "ability to accomplish work, which is the capacity to apply a force sufficient to move an object." Despite this unclear definition, the concept is essentially quite straightforward: electricity merely refers to the force that drives objects. Potential and kinetic energy are the two different categories.

The ability to perform work is the most basic definition of energy. Things alter and move because of energy. It comes in many different shapes and is all around us. Cooking food requires energy.

To know more about Energy visit:

https://brainly.com/question/1932868

#SPJ4

The force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.

Force is an influence that can cause an object to change its motion, direction, shape, or stress state. It is a vector quantity, meaning it has both magnitude and direction.

a) The work done against gravity is equal to the force of gravity multiplied by the distance the block was lifted:
Work = F × d = 50 N × d
Since the distance is not given, we cannot calculate the exact amount of work done.

b) The potential energy of the block at point A is equal to the force of gravity (F) multiplied by the height (h) at which the block was initially located:
UA = F × h
Similarly, the potential energy of the block at point C can be calculated as:
UC = F × 0
Since the block is lifted from A to C, the difference of potential energies is given by:
∆U = UA − UC = F × h − 0 = F × h
Since the force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.

To learn more about force
https://brainly.com/question/12785175
#SPJ4

The statement I ,II,III are the correct statement which must be be included in an investment advisory contract under nasaa rules .

State and provincial securities regulators in the United States, Canada, and Mexico are represented by the North American Securities Administrators Association (NASAA). Members of NASAA issue licences to businesses and their representatives, look into infringements of federal, state, and local laws, bring legal action when necessary, and inform the public about investment fraud. Members of NASAA take part in information exchange and multi-state enforcement activities through the association. According to NASAA regulations, the advice contract must include:

•Description of the services offered; •Term of the contract; •Formula for calculating fees; •Amount of prepaid fees to be returned if contract is terminated early; •No contract assignment is allowed without the customer's consent; •Whether the contract gives the adviser discretionary authority; and •Disclosure that the fee for managing equity securities may be higher than the fee for managing debt securities.

For such more questions on NASAA rules:

brainly.com/question/17056580

#SPJ4

Question :

Which of the following must be included in an investment advisory contract under NASAA rules? I The fact that prepaid fees will not be returned if the contract is terminated early

II The fact that assignment of the contract is only permitted with customer consent

III Whether the contract grants discretionary authority to the adviser

IV Disclosure that the fee for managing fixed income securities may be higher than for managing equity securities

A. I and II only

B. III and IV only

C. I, II, III only

D. I, II, III, IV

a. When the sun is above the horizon, it is daytime.

b. If you have a degree in electrical engineering, you are highly educated.

c. In the United States, anyone over the age of 18 can vote.

d. If you go to Paris, you can see the Mona Lisa.

a. When the sun is above the horizon, it is daytime. The sun is usually visible in the sky during the day and provides light to the earth. However, there are exceptions. B. During a solar eclipse or at the poles where the sun may not be visible for a period of time.

b. If you have a degree in electrical engineering, you are highly educated. This statement is not necessarily true, as a degree in electrical engineering does not necessarily mean that the person is highly educated.

A person may have a degree in electrical engineering, but may not have knowledge or skills in other areas.

c. In the United States, anyone over the age of 18 can vote. This statement is true. The 26th Amendment to the United States Constitution gives citizens over the age of 18 the right to vote.

d. If you go to Paris, you can see the Mona Lisa. This statement is not necessarily true. The Mona Lisa is a famous painting and is on display at the Louvre Museum in Paris, but there are many other works of art and attractions in the city and there is no guarantee that you will see the Mona Lisa during your visit.

To learn more about general knowledge-based questions at

https://brainly.com/question/8262543?referrer=searchResults

#SPJ4

The problems ask to find and plot z[n] = x[2–2n] using [tex]a^{u[n]}[/tex] the function, reconstruct a[n] using linear interpolation and time scaling transformations, and find no and ni such that [n] = p[n+ni) is odd and sketch x[n] for the signal p[n] = u[n+ 7] – u[n+ 3] – u[n + no] + u[n +2].

To learn more about transformations at

https://brainly.com/question/21303815?referrer=searchResults

#SPJ4

The question is -

For problems asking for a sketch, be sure to label heights and times. Show intermediate steps of your work. 1. Combinations of transformations: Let x[n] = a^u[n], where a > 1, find and plot z[n] = x [2–2n). 2. Example of noninvertible transformations: The signal x[n] and two series of time scaling transformations for x[n] are provided below. Try to reconstruct a[n] with each series of transformations. Are both series of transformations invertible? Use linear interpolation if you need to and write down the general formula for calculating the interpolated values. x[n] n -2 -1 0 1 2 3 4 5 5 x[3n] x/r/3] x[n/3] x[n] x[n] x[n/3] x[3n] x[n] x[n] 3. Even/Odd + Step Function: For the signal p[n] = u[n+ 7] – u[n+ 3] – u[n + no] + u[n +2], find no and nį such that [n] = p[n+ni) is odd and sketch x[n].

Answer:

For the system of forces to be in equilibrium, the vector sum of the forces must be equal to zero. Therefore, we can set up the following equation:

(2i-j+k) + (3i+4j+4k) + (5i+3j+3k) = 0

We can also express the force vectors in terms of the position vectors of the points at which they act as follows

F = (3i+2k)×(2i-j+k) + (4i-5j+ak)×(3i+4j+4k) + (-4i-2j+4k)×(5i+3j+3k) = 0

Expanding and simplifying the equation we get

3i+2k - 2j + k - 4i +5aj +4k -5j +4k +5i +3j -3k = 0

-i +3j +3k +5aj = 0

Therefore, a = -1/5

The value of a is -1/5.

To prevent the pulley from turning, 1.103 kg of hanging mass must be applied to the cord.

the cord's torque

It is necessary for the torque in the cord caused by the sliding mass to equal the torque caused by the hanging mass in order to prevent the pulley from turning.

These steps are used to compute the torque:

1 = 2, F1r1 = F2r2, m1gsin()r1 = m2gr2, m1sin()r1 = m2r2, and m2 = m1sin()r1/r2, respectively.

where m1 is the sliding mass.

The inner radius of the pulley is r1.

The angle of inclination of the plane, shown by r2, is the pulley's outer radius.

In order to prevent the pulley from rotating, 1.103 kg of hanging mass must be applied to the cord.

To know more about Torque visit:

brainly.com/question/14839816

#SPJ4

The magnitude of the velocity of the stone is less than that of the point of contact.

The displacement that an object or particle experiences with respect to time is expressed vectorially as velocity. The metre per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimetres per second (cm/s). The velocity is the rate at which a given displacement changes. By figuring out the displacement to total time ratio, it may be calculated. The same as for speed, "m/s" is the SI unit for velocity. Velocity is a vector, whereas speed is a scalar. The letters v (italic) stand for velocity and v for speed (boldface). A bar appears over the symbol for average values.

Learn more about the Velocity here: https://brainly.com/question/80295

#SPJ4

False. An independent voltage source is a two-terminal device that can maintain a fixed potential difference between its terminals, but it does not necessarily keep the potential difference equal to its nominal voltage.

Nominal voltage is an electrical term used to describe the average, or expected, voltage of an electric circuit. It is typically used as a reference point for other measurements. Nominal voltage is typically defined as the voltage that is expected to be available under normal operating conditions, and it is often used to indicate the voltage that is desired for a particular device or system. Nominal voltage is typically specified as a range, with the lower end of the range representing the minimum acceptable voltage and the higher end of the range representing the maximum acceptable voltage.

To learn more about nominal voltage
https://brainly.com/question/26242109
#SPJ4

The changes that would make the water balloon more likely to pop is: to use a liquid that has a lower heat capacity than water to use a thicker balloon. The correct options are B and C.

What is heat capacity? Heat capacity or also known as thermal capacity is a physical property of matter, defined as the amount of heat to be supplied to an object to produce a unit change in its temperature.

So, Using a liquid that has a lower heat capacity than water and using a thicker balloon will make the water balloon more likely to pop. We know now that heat capacity or specific heat is the amount of heat per unit mass that is required to raise the temperature by 1°C.

This is helpful in determining the processing temperatures along with the amount of heat required for processing and could be helpful for differentiating between two polymeric composites.

Learn more about heat capacity at: http://brainly.com/question/29313493

#SPJ4

Buoyancy Force is the reason for the larger the diameter as the Larger the diameter larger the volume of log rolling and the higher the Buoyancy force which leads to floating the participants.

The floating of any dogy depends upon the Buoyancy force that the body is having or we can say the force which is applied on the water's surface to float on it. And However, Buoyancy depends on three things.

1. Gravitational pull(g)- the force applied by the planet to pull/attract ant mass towards itself. in the case of the earth, it is fixed which is 9.8 ms^-2.

2. The density(p)- It is the mass per volume of any liquid In the case of distilled water it is 997 kg/m³. It may barry for ocean water.

3. Volumn of the body(v)- It is the volume of the body which is floating on water.

So fb =  g*p*v where fb( Buoyancy force) is directly proportional to the volume of the body.

So the Greater the volume of the body higher it will float.

Learn More about Buoyancy: https://brainly.com/question/28464280

#SPJ4

When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles.

All forces occur in pairs, as described by the third of Newton's laws of motion in classical mechanics, so that if one object exerts a force on another, the second object exerts an equal and opposite reaction force on the first. A reaction force is the result of an opposite-direction action force. Newton's third law of motion addresses these two forces, referred to as action and reaction forces. Newton's third law states that there is an equal and opposite reaction to every action.

Here,

 2 ℎ  ℎ 11.2   O2=11.2*2=22.4 moles

mols of SO3 produced=13.5*2/2

13.5 mols

mols of O2 consumed=13.5*1/2

=6.75 mols

mols of O2 remaining=11.2-6.75

=4.45 mols of O2

The moles of O2 remaining is 4.45 moles when initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen.

To know more about reaction,

https://brainly.com/question/1071297

#SPJ4

Complete question:

When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles. What is reaction? What amount of oxygen is remaining?

A 130 gg air-track glider is attached to a spring. the glider is pushed in 11.2 cmcm and released. a student with a stopwatch finds that 14.0 oscillations take 9.00 ss .

The period (T) of a spring-mass system can be calculated using the formula:

T = 2 * pi * sqrt(m / k)

where T is the Time period in seconds, m is the mass of the glider in kilograms, and k is the spring constant in N/m.

The frequency (f) of a spring-mass system can be calculated using the formula:

f = 1 / T

where f is the frequency in hertz (Hz) and T is the period in seconds.

The angular frequency (w) is given by :

w = 2 * pi * f

The amplitude (A) of a spring-mass system can be calculated using the formula:

A = x / (2 * pi)

where x is the displacement in meters.

You can use these formulas to find the Period, frequency, angular frequency and amplitude of the given spring-mass system.

Keep in mind that the displacement of the spring (11.2 cm) needs to be converted to meters (0.112 m) before calculating the amplitude.

Also, you have to convert the mass of the glider from gg to kg before applying the formulas.

Learn more about angular frequency here:

https://brainly.com/question/29107224

#SPJ4

The concept of Search, Setup, and Smooth applies to motorcycle riding in the following way:

Search: This refers to the rider's ability to scan the road ahead and anticipate potential hazards, such as turns, traffic, and other obstacles. This is essential for safe riding as it allows the rider to make adjustments to their speed, position, and trajectory in advance.

Setup: This refers to the rider's body position and the setup of the motorcycle. This includes the rider's posture, the position of their feet on the pegs, and the position of their hands on the handlebars. A proper setup allows the rider to maintain stability and control of the motorcycle.

Smooth: This refers to the rider's ability to make smooth and controlled movements on the motorcycle. This includes smooth braking, accelerating, and turning. Smooth riding helps to maintain stability and control, and reduces the risk of accidents.

The Search, Setup, and Smooth concept is a useful framework for thinking about motorcycle riding, as it highlights the importance of awareness, body position, and control in maintaining safety and stability on the road.

In summary,  It emphasizes the rider's ability to anticipate hazards, maintain proper posture and motorcycle setup, and make smooth controlled movements.

Learn more about motorcycle from

https://brainly.com/question/28840082

#SPJ1

Explanation:

A spiral wishing well can be a good representation of a gravitational field in the sense that it demonstrates how objects are attracted to a central point, which is similar to how objects are attracted to a massive object in a gravitational field. The well also shows how the force of gravity increases as objects get closer to the center, which is consistent with the inverse square law of gravity. However, the well is an incorrect representation of a gravitational field in the sense that it is not a three-dimensional representation of the field, but rather a two-dimensional representation. Additionally, the well does not take into account the fact that gravity is a force that acts between all objects with mass, not just those that are close to a central point.

When the proton and electron enter the electric field that is pointed to the right, the proton will be deflected to the right and the electron will be deflected to the left. This is because the proton has a positive charge and the electron has a negative charge, and opposite charges are attracted to each other. The proton and electron will move at the same speed because the electric field does not affect their speed, only their direction of motion.

According to Einstein's theory of general relativity, the orbit of Halley's Comet is determined by the curvature of spacetime caused by the mass of the sun and other celestial bodies. The comet follows an elliptical orbit around the sun, with the sun at one of the foci of the ellipse. The shape of the orbit is determined by the mass of the sun, the distance of the comet from the sun, and the velocity of the comet.

The period of the orbit of Halley's Comet is 76 years, which means that the comet takes 76 years to complete one orbit around the sun. This period is determined by the distance of the comet from the sun, the mass of the sun, and the velocity of the comet. The further the comet is from the sun, the longer the period of its orbit. As the comet approaches the sun, its ices start to vaporize and create a bright tail that can be seen from Earth.

In summary, Einstein's theory of general relativity explains that Halley's Comet only appears every 76 years because of the shape of its orbit around the sun, which is determined by the mass of the sun and the distance of the comet from the sun, as well as the velocity of the comet. The orbit is an elliptical one and the distance from the sun causes the vaporization of ices which make the tail visible from Earth.

Light refraction in spherical lenses & the lens maker formula are the notions that should be applied to the problem at hand. Utilize the lens mfg rule to get the fov of fixed lens & it verify if it is a high or low length.

A optical lens with such a contour that allows light beams to converge in diverge is called a spherical lens, also referred to as a singlet. One reason why spherical lenses are among the most popular ones is that they can project pictures onto the sensor with changing their aspect ratios.

It's an optical apparatus that the light rays pass through to converge / diverge before communicating. Thus, convex or convergent lenses and concave or divergent lenses are the two main categories of spherical lenses.

To know more about spherical lens visit:

https://brainly.com/question/13089079

#SPJ4

The piston is the most important part of the brake caliper, which is a crucial part of the entire brake system. In order to stop your car, pistons must force the brake pads to make contact with the brake rotor.

The parking brake or emergency brake is typically fastened to the back wheels of a vehicle. The parking brake is typically connected to the rear drum brakes on vehicles with them using cables, as seen in Figure 14-10. Integral parking brakes are what they are known as.

It is a "motor-on-caliper" technology that operates the caliper without the use of a separate parking cable by integrating an actuator into the caliper located on the back wheel. The existing water/foot parking lever has been eliminated, and now a single button can be used to accomplish the parking function.

For those who are unaware, a parking brake that is integral means that your caliper piston serves two purposes. When you push the brake pedal, pressure is first applied to the brake pads. Second, when you use the parking brake, a ratchet mechanism applies pressure.

To learn about piston

https://brainly.com/question/21852769

#SPJ4

Smallest are: q1 = +1 nc, q2 = +1 nc, q3 = +1 nc and q1 = -1 nc, q2 = -1 nc, q3 = -1nc

Third Largest: q1 = +1 nc, q2 = +1nc, q3 = -1 nc

Second Largest: q1 = +1 nc, q2 = -1 nc, q3 = +1 nc

Largest : q1 = +1 nc, q2 = -1 nc, q3 = -1 nc and q1 = -1 nc, q2 = +1 nc, q3 = +1 nc

(Refer to image)

Where r is the distance between the 2 charges q1 and q2 and k is coulombs constant.

F ∝ q1•q2/r²

Thus, if the combination has same type of charges, i.e;(+1,+1,+1) or (-1,-1,-1), the force will be very small.

So, now the order of forces from smallest to largest is;

Smallest are: q1 = +1 nc, q2 = +1 nc, q3 = +1 nc and q1 = -1 nc, q2 = -1 nc, q3 = -1nc

Third Largest: q1 = +1 nc, q2 = +1nc, q3 = -1 nc

Second Largest: q1 = +1 nc, q2 = -1 nc, q3 = +1 nc

Largest are: q1 = +1 nc, q2 = -1 nc, q3 = -1 nc and q1 = -1 nc, q2 = +1 nc, q3 = +1 nc

To know more about charges visit:

https://brainly.com/question/17482950

#SPJ4

The acceleration of hoverflies is 13.879[tex]\frac{m}{s^{2} }[/tex].

It has fallen height from 0.11m

Now, the remaining height is 0.29m.

When an object shifts in relation to time, there are two ways to measure the shift in the object's position. One may take into account the actual distance traveled or the distance that is shortest between the two points.

Here in lies the distinction between two incredibly basic physics ideas. Distance is the first unit of measurement used to determine how an object's location has changed, while displacement is the second.

Distance is the real unit used to describe how much an object's position has changed overall over time. Since it is a scalar quantity, all that is provided is the magnitude.

Now using third equation of motion,

[tex]v^{2}- u^{2}=2as[/tex]

[tex]v^{2}-0=2\times-9\times0.11[/tex]

[tex]v^{2}=-2.2[/tex]

v=1.5

[tex]v^{2}- u^{2}=2as[/tex] as remaining s=0.29 and v of crashing as it goes downwards which negative. 0 and u= 1-5 as its downward now by this find the acceleration.

[tex]v^{2}- u^{2}=2(a-10)s[/tex]

[tex]0^{2}- 1.5^{2}=2(a-10)\times0.29[/tex]

a=13.879[tex]\frac{m}{s^{2} }[/tex]

Learn more about acceleration

brainly.com/question/12550364

#SPJ4