False, earthquake-induced forces are not an example of gravity loading on a structure. They are instead considered lateral or horizontal forces, also known as seismic loading, which act on the structure during an earthquake. Gravity loading refers to the vertical forces acting on a structure due to its own weight and the weight of its contents.
Gravity loading refers to the weight of the structure and any other loads that are caused by the force of gravity, such as the weight of people or objects inside the building. Earthquake-induced forces, on the other hand, are caused by the shaking and movement of the ground during an earthquake and are classified as lateral loads. These forces can cause significant damage to a structure, particularly if it is not designed to withstand them.
Learn more about force of gravity: https://brainly.com/question/14874038
#SPJ11
How can plants physically weather a rock?
A) Plant roots grow around a rock, crushing it.
B) Plant roots exert outward pressures as they grow.
C) Acids created by plants chemically weather the rock.
D) Plants make fractures for water to fill, which will wedge fractures open.
Plants physically weather a rock due to the Plant roots exert outward pressures as they grow. Therefore the correct option is option B.
Through a process known as root wedging, plants can physically weather a rock. Growing plant roots may apply external pressure to the surrounding rock, causing it to crack and crumble.
This is especially useful in regions where the rock is porous or broken because the roots can grow into the fractures and widen them as they develop, allowing more room for water and other weathering agents to interact with the rock. Therefore the correct option is option B.
For such more question on weather:
https://brainly.com/question/28598079
#SPJ11
How would you know when you left on region and entered another?
Answer:
When you cross a boundary line between two regions, you will have left one region and entered another. The boundary line is typically a curve or a line that separates the two regions. You can identify the boundary line by looking at the equation of the function that defines the regions. The boundary line will be the set of points where the equation is true for both regions. For example, if the equation is y = x² and the two regions are above and below the x-axis, then the boundary line is the x-axis itself, since it is the set of points where y = 0 for both regions. When you cross the x-axis, you will have left one region and entered the other.
Explanation:
3. which city has the lowest annual rainfall? which city has the highest annual rainfall? (hint: remember you can hover the cursor over the appropriate dot on the dotplot.)
According to the dotplot, it appears that the city with the lowest annual rainfall is Las Vegas with only 4 inches of rainfall per year. On the other hand, the city with the highest annual rainfall seems to be New Orleans with over 60 inches of rainfall per year. It is interesting to note that the other cities on the dotplot fall somewhere in between these two extremes.
The low annual rainfall in Las Vegas is likely due to its location in the desert, where precipitation is scarce. In contrast, New Orleans is located in a region with a humid subtropical climate, which is characterized by high humidity and frequent rainfall.
Overall, the dotplot is a helpful tool for visualizing and comparing annual rainfall levels among different cities. It allows us to quickly identify the lowest and highest rainfall cities, as well as see how other cities compare.
To know more about rainfall refer here:
https://brainly.com/question/12907709?referrer=searchResults
#SPJ11
How did the fact that Athens was so close to the sea affect its economy?
The fact that Athens was located close to the sea had a significant impact on its economy. Athens became a powerful maritime city-state with a flourishing economy based on sea trade, fishing, and naval power. The proximity to the sea facilitated the transportation of goods, such as olive oil, wine, pottery, and silver, to other parts of Greece and the Mediterranean world, which brought in substantial wealth for the city.
The sea also provided Athens with an abundant supply of fish, which was an important source of protein for its citizens. Fishing became a significant industry, and fish was a staple food in the city. In addition, Athens became a dominant naval power, building a large fleet of warships, which helped the city to establish its dominance over other city-states in the region. The navy also provided protection for Athenian trade ships, which contributed to the growth of Athens' economy. Overall, the proximity of Athens to the sea played a crucial role in the development of its economy, making it a wealthy and powerful city-state in ancient Greece.
Learn more about Mediterranean world here:
https://brainly.com/question/17526045
#SPJ11
Which two rock types would you expect to see sitting next to each other after a very long period characterized by only uplift and erosion?
A) metamorphic and sedimentary rocks
B) hard and soft rocks
C) extrusive igneous and intrusive igneous rocks
D) metamorphic and intrusive igneous rocks
A) Metamorphic and sedimentary rocks would be the two rock types you would expect to see sitting next to each other after a very long period characterized by only uplift and erosion.
After a very long period characterized by only uplift and erosion, you would expect to see metamorphic and sedimentary rocks sitting next to each other. Uplift exposes rocks to the surface, where erosion breaks them down into sediments. These sediments are then deposited and eventually form sedimentary rocks.
At the same time, the pressure and heat associated with uplift can cause changes in existing rocks, leading to the formation of metamorphic rocks.
Learn more about erosion here: brainly.com/question/30587260
#SPJ11
How do the eruptions that created the Columbia Plateau differ from the eruptions that create large composite volcanoes?
The eruptions that created the Columbia Plateau differ from the eruptions that create large composite volcanoes in several ways: Eruption Style, Magma Composition and Volcano Shape.
There are various ways in which the eruptions that formed the Columbia Plateau are different from those that formed the huge composite volcanoes:
Eruption Style: Lava flows slowly and steadily out of the volcano in effusive eruptions, which are what gave rise to the Columbia Plateau. The magma that created the Columbia Plateau is basaltic in composition, which means that it has a low viscosity and is easily movable. Volcano Shape: The Columbia Plateau is a sizable, somewhat flat region that extends across a number of western US states.For such more question on volcanoes:
https://brainly.com/question/440765
#SPJ11
A(n) _____ is a mudflow composed of volcanic debris that is fluid when moving but solidifies soon after stopping.
The term that fits this description is "lahar". Lahars are a type of volcanic mudflow that occur when volcanic ash, rock fragments, and other debris mix with water, often from melted snow or ice, to create a slurry that can travel down slopes and valleys at high speeds.
Lahars can be extremely destructive, as they can carry large boulders, trees, and other debris that can cause significant damage to buildings, roads, and other infrastructure in their path. They can also be deadly, as they can engulf entire villages and towns. Once a lahar stops moving, it quickly solidifies, becoming a hard, cement-like material that can be difficult to remove. Scientists and engineers have developed a number of strategies to mitigate the risk of lahars, including building protective barriers, diverting or containing flows, and monitoring volcanic activity to predict and prepare for potential eruptions.
Know more about Lahars here:
https://brainly.com/question/14643369
#SPJ11
What effect did the Cuban Missile Crisis have on relations between the US and the USSR?
The Cuban Missile Crisis had a significant impact on the relationship between the US and the USSR. The crisis occurred in 1962, when the US discovered that the Soviet Union was placing nuclear missiles in Cuba. This caused a major standoff between the two nations, as the US feared that the missiles could be used to launch an attack on the US mainland.
The crisis ultimately ended with the Soviet Union removing the missiles from Cuba, but it left a lasting impact on the relationship between the two nations. The crisis highlighted the tensions and mistrust that existed between the US and the USSR, and it also demonstrated the potential for nuclear war. In the aftermath of the crisis, both nations took steps to improve communication and reduce tensions. This led to the establishment of a direct hotline between the White House and the Kremlin, which allowed for more immediate communication in times of crisis. Overall, the Cuban Missile Crisis served as a wake-up call for both the US and the USSR, as it showed that their actions could have far-reaching consequences. It also highlighted the importance of diplomacy and communication in avoiding conflicts and maintaining peaceful relations between nations.
Learn more about Cuban Missile Crisis here
https://brainly.com/question/1389707
#SPJ11
The eruption of Mt. St. Helens in 1980
A. was triggered by a landslide on its northern flank.
B. produced lava flows that traveled at the speed of sound and flattened forests.
C. occurred without warning, killing 60 people.
D. was the largest volcanic eruption ever recorded.
The eruption of Mt. St. Helens in 1980 was triggered by a landslide on its northern flank. Option A is correct.
On May 18, 1980, a massive landslide on the northern flank of Mount St. Helens caused a violent eruption, sending a plume of ash and gas more than 15 miles into the atmosphere. The landslide was triggered by an earthquake that caused the north face of the mountain to collapse, which in turn released a massive explosion of hot gas, ash, and rock. The eruption of Mt. St. Helens was one of the most destructive volcanic events in U.S. history, causing widespread devastation to the surrounding area and killing 57 people. While the eruption did produce pyroclastic flows, which are fast-moving clouds of hot gas and ash that can flatten forests, they did not travel at the speed of sound. The eruption was also not the largest volcanic eruption ever recorded.
Learn more about flank here:
https://brainly.com/question/28586842
#SPJ11
You have found a Mafic rock with a phaneritic texture what is a potential Rock name?
If you have found a mafic rock with a phaneritic texture, it is likely that you have come across a type of igneous rock known as gabbro. Gabbro is a dark-colored rock that is rich in minerals such as pyroxene, plagioclase, and olivine.
The term "mafic" refers to the composition of the rock, which contains high amounts of magnesium and iron, and "phaneritic texture" refers to the coarse-grained, visible crystals that make up the rock. Gabbro forms deep beneath the Earth's surface through slow cooling of magma or lava. As the magma cools, mineral crystals begin to form and grow, resulting in a phaneritic texture. Gabbro is a common rock type in the oceanic crust and can also be found in continental crust. Gabbro is a valuable resource in construction and building industries due to its durability and strength. It is used as a building material, for crushed stone, and in the production of ceramics and glass. Additionally, gabbro has been used as a decorative stone in architecture and landscaping.
Learn more about mafic rock here
https://brainly.com/question/31441805
#SPJ11
Load factors are applied to loads acting on building to account for which of the following (choose all that apply)
-Approximations in design methodology
Uncertainty in the magnitude and location of applied loads.
-Variation in construction (poor construction)
-Differences in material strength
Load factors are applied to loads acting on a building to account for uncertainty in the magnitude and location of applied loads and variations in construction (poor construction).
These factors are essential in ensuring the safety and stability of a structure, especially considering the unpredictability of natural disasters and other extreme events. Load factors also help to account for approximations in design methodology and differences in material strength, as they provide a margin of safety that compensates for any errors or discrepancies that may arise. In summary, load factors are a critical component of building design and construction, as they help to ensure that buildings are strong, stable, and able to withstand a range of challenging conditions over time.
To learn more about variations, visit:
https://brainly.com/question/1294079
#SPJ11
Subduction zone metamorphism
A. All of the possible answers are correct.
B. is similar to contact metamorphism.
C. forms the metamorphic rock blueschist.
D. involves high temperatures and low pressure.
Subduction zone metamorphism forms the metamorphic rock blueschist. Option C is correct
Subduction zone metamorphism occurs at convergent plate boundaries where one tectonic plate is forced beneath another, resulting in high pressure and low temperature conditions. This type of metamorphism can lead to the formation of blueschist, a blue-colored metamorphic rock that forms under high pressure and low temperature conditions. Therefore, option C is correct. Option A is incorrect as it is too general, while option B and D are incorrect as they do not accurately describe subduction zone metamorphism. Blueschist is a type of metamorphic rock that forms under high-pressure, low-temperature conditions during subduction zone metamorphism. It typically has a blue color due to the presence of the mineral glaucophane, which forms in the presence of high-pressure, low-temperature conditions. Blueschist often forms in subduction zones where oceanic crust is being subducted beneath another plate. The high pressure and low temperature conditions necessary for blueschist formation are typically found at depths of 15 to 30 kilometers within the Earth's crust. Blueschist is an important rock type because it can provide important information about the tectonic history and evolution of an area.
Learn more about metamorphism here:
https://brainly.com/question/1100440
#SPJ11
Which exoplanet orbits closest to its star?A. HD 149026-bB. OGLE-TR-113bC. TrES-1D. HD 209458-bE. XO-1b
Of the five options provided, the exoplanet that orbits closest to its star is HD 209458-b. This exoplanet is also known as Osiris and it orbits a star in the constellation Pegasus.
HD 209458-b is classified as a hot Jupiter, which means it is a gas giant planet that orbits very close to its host star, completing one orbit in just 3.5 Earth days. The distance between HD 209458-b and its star is only about 0.047 astronomical units (AU), which is about 7 million kilometers.
The other four options also orbit very close to their host stars and are also classified as hot Jupiters. HD 149026-b orbits at a distance of about 0.042 AU from its star, OGLE-TR-113b orbits at a distance of about 0.022 AU, TrES-1 orbits at a distance of about 0.039 AU, and XO-1b orbits at a distance of about 0.049 AU. However, HD 209458-b is the closest of these five exoplanets to its host star, making it a particularly interesting object for exoplanet studies.
Learn more about studies here:
https://brainly.com/question/20758569
#SPJ11
Soils of the world are classified into 11 orders. The orders are based on soil characteristics.
(1) The Carolinas (North and South) are dominated by ____ order. List the characteristics of this soil order. soil
(2) List the soil orders that dominate the Australian continent.
Major soil orders in Australia include Vertisols, Alfisols, Mollisols, Aridisols, Entisols, Inceptisols, Andisols, Gelisols, Histosols, Spodosols, and Ultisols.
(1) The Carolinas (North and South) are dominated by the Ultisols order. Ultisols are characterized by their strong acidity and low fertility due to the leaching of basic cations such as calcium, magnesium, and potassium. They are often found in humid regions with high rainfall and are typically derived from older, highly weathered parent materials such as granite or gneiss. Ultisols have a clay-rich subsoil layer called the argillic horizon, which is typically red or yellow in color due to the presence of iron oxides. This horizon can be quite thick, up to several meters deep in some cases. Ultisols are not well-suited for agriculture due to their low fertility and high acidity, but they are often used for forestry or grazing.
(2) The Australian continent is dominated by a number of different soil orders, reflecting the continent's diverse geology, climate, and vegetation.
Some of the major soil orders found in Australia include:
Vertisols: These are heavy clay soils that shrink and swell significantly with changes in moisture content, often forming deep cracks when dry. They are found in areas with a pronounced dry season and high temperatures, and are often used for grazing or dryland agriculture.Alfisols: These are moderately weathered soils with a clay-rich subsoil that is moderately fertile. They are often found in areas with a Mediterranean climate, and are well-suited for agriculture.Mollisols: These are deep, fertile soils with a high organic matter content, often found in grassland ecosystems. They are well-suited for agriculture and are used extensively for grazing and crop production.Aridisols: These are desert soils with low organic matter content and low fertility. They are found in arid and semiarid regions and are typically used for grazing.Entisols: These are young, poorly developed soils that lack a distinct subsoil horizon. They are found in a variety of environments and are often used for forestry or range management.Inceptisols: These are moderately developed soils with a weakly developed subsoil horizon. They are found in a variety of environments and are often used for forestry, grazing, or dryland agriculture.Other soil orders found in Australia include Andisols, Gelisols, Histosols, Spodosols, and Ultisols. Each of these soil orders has its own unique characteristics and distribution patterns, reflecting the complex interplay of geology, climate, and vegetation across the Australian continent.
Learn more about Mediterranean climate here:
https://brainly.com/question/9231311
#SPJ11
The recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the AHJ.
True or False
True, The recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the Authority Having Jurisdiction (AHJ). This indicates that the hurricane was stronger than the anticipated wind speeds used for design and construction purposes in the affected areas.
The AHJ (Authority Having Jurisdiction) sets the minimum wind speed requirements for building design in a particular area. During Hurricane Michael, the recorded wind speed exceeded the specified design wind speed, which means that the buildings and structures in the affected areas may not have been able to withstand the force of the wind. This can lead to significant damage and destruction. Therefore, it is true that the recorded wind speed during Hurricane Michael exceeded the design wind speed as specified by the AHJ.
Learn more about Authority Having Jurisdiction (AHJ): https://brainly.com/question/14521642
#SPJ11
which of following rock types does NOT involve dissolved gas in the magma?
a. tuff
b. pumice
c. scoria
d. diorite
e. vesicular basalt
The rock type that does NOT involve dissolved gas in the magma is diorite (option d). Diorite is an intrusive igneous rock that is formed from the slow cooling
solidification of magma deep underground. Unlike volcanic rocks such as tuff, pumice, scoria, and vesicular basalt,
It forms from the slow cooling and solidification of magma deep within the Earth's crust. Unlike the other rock types listed in the question, diorite does not involve dissolved gas in the magma. Tuff, pumice, scoria, and vesicular basalt are all formed from volcanic activity, which involves the rapid cooling and solidification of magma that has dissolved gas (usually water vapor) in it. As the magma rises to the surface and encounters lower pressure, the dissolved gas comes out of solution and forms bubbles, creating a porous or vesicular texture in the resulting rock.
Learn more about solidification here:
https://brainly.com/question/21278640
#SPJ11
True or False? A mineral can scratch any mineral harder than itself.
False. A mineral can only scratch minerals that are softer than itself on the Mohs scale of mineral hardness. The Mohs scale ranks minerals from 1 (softest) to 10 (hardest).
For example, a mineral with a hardness of 7 can scratch minerals with a hardness of 6 or lower, but it cannot scratch minerals with a hardness of 8 or higher. This is because the harder mineral has stronger bonds between its atoms, making it more difficult to break or scratch. However, it is important to note that the Mohs scale is not a linear scale and the difference in hardness between each mineral may not be equal. Therefore, it is possible for a mineral to scratch another mineral with a slightly higher hardness, but it is not a general rule.
Learn more about mineral here
https://brainly.com/question/15844293
#SPJ11
12 part II) Examine each of the placemarks following the sedimentary structure GigaPan. Which of these four settings is most likely the sort of environment where the sedimentary structure you identified in the previous question would have formed?Group of answer choicesA) a river flowing into the seaB) a delta distributaryC) a glacial moraineD) a field of sand dunes
Based on the sedimentary structure observed in the GigaPan, the most likely environment where it would have formed is a delta distributary. Hence the correct option is B.
This is because delta distributaries are known for their complex sedimentary structures, with layers of sand, mud, and gravel deposited in a variety of ways. The branching channels of a delta distributary also create a lot of turbulence, which can help to sort and layer different types of sediment. In contrast, a river flowing into the sea would have a more straightforward sedimentary structure, with coarser sediments deposited closer to the river mouth and finer sediments further out.
A glacial moraine would have a different type of sedimentary structure altogether, with large boulders and rocks deposited in a chaotic pattern by a glacier. A field of sand dunes would also have a simpler sedimentary structure, with layers of sand deposited by wind in a relatively uniform pattern.
To know more about Delta distributary, click here:
https://brainly.com/question/28556541
#SPJ11
The type of ocean current that is driven by differences in temperature and salinity is a ________ circulation.
A) thermohaline
B) gyre
C) Coriolis effect
D) Hadley cell
E) Ferrel cell
The a) thermohaline circulation, also known as the ocean conveyor belt, is driven by differences in temperature and salinity.
In areas where water is cold as well as salty, it sinks to the bottom and begins to circulate around the globe, while warm and less salty water rises to the surface.
This circulation plays a crucial role in regulating global climate and distributing nutrients throughout the ocean. The conclusion would emphasize the importance of understanding as well as monitoring thermohaline circulation in order to better understand and address the impacts of climate change.
To know more about thermohaline circulation visit:
https://brainly.com/question/29451664
#SPJ11
T/F volcanic danger-assessment maps are valuable tools in protecting human life when volcanic eruption threatens.
True, volcanic danger-assessment maps are valuable tools in protecting human life when volcanic eruption threatens.
These maps provide information on the potential hazards and risks associated with volcanic activity, such as lava flows, ash fall, and pyroclastic flows. They help emergency managers and local authorities to plan for and respond to volcanic events, by identifying areas that are most at risk and implementing appropriate measures to protect people and property.
volcanic, maps- https://brainly.com/question/8536215
#SPJ11
What is one theory that explains the cause of ice ages?
Answer:
a chain reaction of positive feedbacks triggered by periodic changes in the Earth's orbit around the sun
Explanation:
In general, it is felt that ice ages are caused by a chain reaction of positive feedback triggered by periodic changes in the Earth's orbit around the Sun. These feedbacks, involving the spread of ice and the release of greenhouse gases, work in reverse to warm the Earth up again when the orbital cycle shifts back.
About half of the ash produced by Mount St. Helens came from ______, and the other half was the result of ______.
About half of the ash produced by Mount St. Helens came from the vertical blast that occurred on May 18, 1980. This blast sent a plume of ash and gas straight up into the atmosphere, which then fell back down onto the surrounding area as ash.
The other half of the ash was the result of the pyroclastic flows that occurred during the eruption. These flows were composed of hot gas and ash that traveled down the sides of the mountain at high speeds, destroying everything in their path. As they moved, they picked up additional material from the ground, adding to the volume of ash that was ultimately ejected into the atmosphere. The eruption of Mount St. Helens was one of the most significant volcanic events in recent history, and it produced a staggering amount of ash and other materials that impacted the environment and communities in the surrounding area. While the ash from the eruption has largely settled, the effects of the eruption can still be seen in the landscape today, serving as a reminder of the power and unpredictability of natural disasters.
Learn more about Mount St. Helens here
https://brainly.com/question/13620918
#SPJ11
Pyroclasts, the shattered fragments of erupted magma thrown up into the atmosphere during an eruption, are brought back to ground during the formation of ______. (Select all that apply.)
Pyroclasts, the shattered fragments of erupted magma, are brought back to the ground during the formation of volcanic deposits. Volcanic deposits are formed by the accumulation and consolidation of materials ejected during volcanic eruptions, including pyroclasts, lava flows, and ash.
These deposits can take on different forms depending on the type of eruption and the size of the particles that make up the pyroclasts. Some examples of volcanic deposits include tuff, which is made up of small, fine-grained particles; volcanic breccia, which is made up of large, angular fragments; and ignimbrite, which is formed by the deposition of hot ash and gas flows. In addition to forming distinct geological formations, volcanic deposits also provide important information about past eruptions and the history of a volcano. Scientists can study the composition and structure of volcanic deposits to better understand the timing, duration, and magnitude of past eruptions, which can help inform hazard assessments and mitigation strategies in areas prone to volcanic activity.
Know more about Pyroclasts here:
https://brainly.com/question/16582896
#SPJ11
Mount St. Helens, one of several large volcanoes in the Cascade Range, has experienced a major eruption every ______ years since about 500 B.C.
Mount St. Helens, located in the state of Washington, is a well-known active volcano in the Cascade Range. Scientists estimate that the volcano has experienced a major eruption every 100 to 300 years since about 500 B.C.
However, the exact interval between eruptions is difficult to determine, as volcanic activity is influenced by a number of complex factors. The most recent major eruption of Mount St. Helens occurred on May 18, 1980, causing significant damage and loss of life in the surrounding area. The eruption resulted in the collapse of the volcano's north face, triggering a massive landslide and sending a plume of ash and volcanic material 15 miles into the air. The event was one of the most significant volcanic eruptions in the history of the United States, and it had a profound impact on the local environment and communities. Today, Mount St. Helens remains an active volcano, and scientists continue to study the mountain in order to better understand its behavior and potential for future eruptions.
Know more about Mount St. Helens here:
https://brainly.com/question/7602037
#SPJ11
Rock salt is an example of a(n) __________, deposited by saturation and precipitation in evaporating water.
A)biochemical
B)evaporite
C) detrital sedimentary rock
D)limestone
E)chert
The answer to the question is B) evaporite. Rock salt is an example of an evaporite, which is a type of sedimentary rock that forms when dissolved minerals in water precipitate due to the evaporation of water.
Rock salt is a type of evaporite that forms through the process of saturation and precipitation in evaporating water. A more detailed answer would explain that evaporites are a type of sedimentary rock that form when mineral-rich solutions (such as saltwater) evaporate and leave behind the minerals they were carrying. Common types of evaporites include rock salt (halite), gypsum, and anhydrite. These rocks often form in arid or semi-arid environments where evaporation rates are high and there is a ready supply of mineral-rich water.
Learn more about Rock salt: https://brainly.com/question/9259374
#SPJ11
How many species of animals live in Mammoth Cave?
it is estimated that there are over 130 species of animals that live in the cave, including a variety of insects, bats, and other small animals.
Mammoth Cave is home to a diverse range of animal species, including over 130 different species of animals such as bats, cave fish, spiders, beetles, crickets, salamanders, and others. Some of the species that are found in the cave are unique to this specific ecosystem, and have evolved specific adaptations to living in the dark and nutrient-poor environment of the cave. The cave is also home to several endangered species, including the Indiana bat and the Kentucky cave shrimp.
Learn more about Mammoth here:https://brainly.com/question/24163999
#SPJ11
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because ___________.
1. Erosion can be measured
2. Houses can be located
3. Sedimentation can be measured
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because they enable the measurement of erosion and sedimentation. The correct option is 1 and 3.
By conducting LIDAR surveys before and after a hurricane, scientists can assess the extent of erosion by comparing the changes in the topography of the island.
This allows them to determine the areas most affected by the hurricane and the magnitude of the erosion. Similarly, sedimentation can be measured by observing the deposition of sediments in different locations on the island.
These measurements help to understand the overall impact of hurricanes on barrier islands and inform strategies for their preservation. Although LIDAR can also be used to locate houses, this aspect is less relevant to documenting the effects of hurricanes on the islands themselves.
To know more about hurricanes refer here:
https://brainly.com/question/23906921#
#SPJ11
The U.S. Geological Survey created the ______ to monitor volcanoes for potential eruptions in volcanically active areas such as California and Yellowstone.
The U.S. Geological Survey created the Volcano Hazards Program to monitor volcanoes for potential eruptions in volcanically active areas such as California and Yellowstone.
The Volcano Hazards Programme was established by the U.S. Geological Survey to monitor volcanoes for prospective eruptions in volcanically active regions including California and Yellowstone.
The VHP monitors volcanoes using a number of methods, such as seismic monitoring, monitoring of gas and ash emissions, analysis of satellite data, and ground-based observations.
With the use of this monitoring, the VHP is able to identify changes in volcanic activity that could be signs of an impending eruption and to alert the public and local authorities as necessary with warnings and advisories.
The program's objective is to lower the risk that volcanic hazards provide to infrastructure and communities through research, information gathering, and dissemination to the general public and emergency management personnel.
For such more question on Volcano:
https://brainly.com/question/30836519
#SPJ11
Less than 1% of volcano-related deaths are caused by ______ because they move very slowly.
Less than 1% of volcano-related deaths are caused by lava flows because they move very slowly. Volcanoes, which are openings in the Earth's crust, release molten rock, ash, and gases during eruptions.
These natural events can lead to various hazards, including lava flows, pyroclastic flows, ashfall, and volcanic gases. Lava flows are streams of molten rock that emerge from a volcanic vent and move across the landscape. Due to their high viscosity and slow movement, typically ranging from a few meters per hour to a few kilometers per hour, people can usually evacuate the area in time, resulting in fewer fatalities compared to other volcanic hazards. Although lava flows can cause significant property damage and alter the landscape, the risk of direct human fatalities remains relatively low. In contrast, pyroclastic flows, which are fast-moving, ground-hugging mixtures of hot gas, ash, and rock fragments, pose a much greater threat to human life. They can travel at speeds of up to 700 kilometers per hour and can reach temperatures of 1,000 degrees Celsius. As a result, pyroclastic flows are responsible for the majority of volcano-related deaths. In summary, less than 1% of volcano-related deaths are caused by lava flows due to their slow movement, which allows people to evacuate and avoid fatal encounters. Other volcanic hazards, such as pyroclastic flows, are more dangerous and deadly.
Learn more about volcano here
https://brainly.com/question/30836519
#SPJ11
What characteristics or markers identifies and unifies those regions you just listed?
Some characteristics or markers that can be used to identify regions are:
Physical featuresPolitical boundariesPopulation distributionHow can regions be identified ?The terrain of a map can determine its regional breakdown, categorized by natural elements like mountains, rivers, lakes, and coastlines. These features tend to serve as significant markers that shape the regional scope.
Geographical divisions determined by political entities such as countries, states, or administrative districts are frequent on maps. The criteria for these boundaries could stem from cultural or historical background amongst others.
Regions dependent on population density or distribution are another way maps may be segregated. Examples include regions based on urbanisation levels, proximity to densely populated spaces, or focusing on rural areas.
Find out more on regions at https://brainly.com/question/18300719
#SPJ1