te express your answer in condensed form in order of increasing orbital energy as a string without blank space between orbitals. for example, [he]2s22p2 should be entered as [he]2s^22p^2

When comparing NO(g) and NO₂(g) at 300 ∘C and 0.01 atm, one mole of NO₂(g) possesses the larger entropy per mole. When comparing H₂O(g) and H₂O(l) at 100 ∘C and 1 atm, one mole of H₂O(g) possesses the larger entropy per mole. When comparing O₂(g) and CH₄(g) at 298 K and 20-L volume, one mole of O₂(g) possesses the larger entropy per mole. When comparing Na₂CO₃(s) and Na₂CO₃(aq) at 30 ∘C, they have the same entropy per mole .

PART A: When comparing NO(g) and NO₂(g) at 300 ∘C and 0.01 atm, one mole of NO₂(g) possesses the larger entropy per mole.

This is best explained because NO₂(g) is a more complex molecule than NO(g) with more vibrational degrees of freedom. This means that NO₂(g) has more ways in which it can store energy, leading to a higher entropy.

PART B: When comparing H₂O(g) and H₂O(l) at 100 ∘C and 1 atm, one mole of H₂O(g) possesses the larger entropy per mole.

This is because in the gaseous state, H₂O molecules have more freedom of movement and can occupy a larger volume, leading to a higher entropy.

PART C: When comparing O₂(g) and CH₄(g) at 298 K and 20-L volume, one mole of O₂(g) possesses the larger entropy per mole. This is because O₂(g) is a diatomic molecule with more degrees of freedom than CH₄(g), which has a more complex structure with fewer degrees of freedom.

PART D: When comparing Na₂CO₃(s) and Na₂CO₃(aq) at 30 ∘C, they have the same entropy per mole since the state of matter (solid or aqueous) does not affect the entropy of a substance.

Learn more about entropy

https://brainly.com/question/13135498

#SPJ4

9.21g is the mass in gram of LiCI (Lithium chloride) (molar mass = 42.0 g/mol) would be needed to prepare 350 ml of 0.630 M LiBr solution.

A body's mass is an inherent quality. Prior to the discoveries of the atom as well as particle physics, it was widely considered to be tied to the amount of matter within a physical body.

It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.

Molarity = number of moles/ volume of solution in liter

volume = 350/1000=0.35L

0.630 = number of moles/ 0.35

number of moles= 0.22

mass = 0.22× 42.0

         =9.21g

To know more about mass, here:

https://brainly.com/question/19694949

#SPJ1

Yes, a miscibility gap exists for a mixture of water and 1-butanol at 928C. The range of compositions over which this gap exists is between the eutectic point and the upper cloud point.

The eutectic point is the composition where the two components form two liquid phases, and the upper cloud point is the composition where the two components form a single liquid phase.

The van Laar parameters for this system (L12) indicate the degree to which changes in temperature, pressure, and composition affect the relative solubility of the two components.

For a mixture of 1-butanol and water at 928C, the relative solubility of the two components decreases as the composition deviates from the eutectic point, resulting in a miscibility gap. The range of compositions over which this gap exists is determined by the van Laar parameters.

Know more about eutectic point here

https://brainly.com/question/31382998#

#SPJ11

Answer:

PH(potential of hydrogen) above 7 is alkaline

so PH 10.4 is alkaline

83.3 mL is required to provide 0.125mol KOH

Explanation:

We know that,

V=[tex]\frac{n}{c}[/tex] where n=number of moles, c= concentration and V=volume

According to the question,

c=1.50M and n=0.125 mol

Substituting the values,

V=[tex]\frac{0.125mol}{1.50M}[/tex]

=0.0833L

The volume should be in mL,

0.0833L× [tex]\frac{1000mL}{1L}[/tex]

= 83.3mL

An ore is a mineral from which a metal can be extracted profitably. The profitability of an ore depends on various factors such as the concentration of the metal in the ore, the accessibility of the ore, the cost of extraction, and the demand for the metal in the market.

For more such question on ore

https://brainly.com/question/89259

#SPJ11

Before any base is added, the pH of the naproxen solution is 2.60. At the half-equivalence point, the pH of the naproxen solution is 3.10. At the equivalence point, the pH of the naproxen solution is not provided in the given information.

Naproxen is a weak acid, and its dissociation reaction can be written as follows:

Naproxen (HA) ⇌ Naproxen⁻ (A⁻) + H⁺

The equilibrium constant expression for this reaction can be written as:

Ka = [A⁻][H⁺]/[HA]

where Ka is the acid dissociation constant, [A⁻] is the concentration of the conjugate base, [H⁺] is the concentration of hydrogen ions, and [HA] is the concentration of the weak acid.

The pKa of naproxen is given as 4.2, which means that:

pKa = -log Ka

4.2 = -log Ka

Ka = 10^(-4.2)

Ka = 6.31 x 10⁻⁵

(a) Before any base has been added, the concentration of H⁺ ions can be calculated using the expression:

Ka = [A⁻][H⁺]/[HA]

At the start of the titration, the concentration of the weak acid HA is 0.1 M, and the concentration of its conjugate base A^- is zero. Therefore, we can write:

Ka = [H⁺][A⁻]/[HA]

[H^+] = sqrt(Ka x [HA])

[H^+] = sqrt(6.31 x 10^(-5) x 0.1) = 2.52 x 10⁻³M

pH = -log[H⁺] = -log(2.52 x 10⁻³) = 2.60

Therefore, the pH before any base has been added is 2.60.

(b) At the half-equivalence point, half of the weak acid has been neutralized by the added base. At this point, the moles of weak acid and the moles of added base are equal. Therefore, the concentration of the weak acid and the conjugate base are equal.

At the half-equivalence point, the number of moles of NaOH added is:

0.5 L x 0.01 M = 0.005 moles

Since naproxen is a monoprotic acid, the number of moles of weak acid at the half-equivalence point is also 0.005 moles. Therefore, the concentration of weak acid is:

[HA] = 0.005 moles / 0.5 L = 0.01 M

At the half-equivalence point, the concentration of the conjugate base is also 0.01 M.

The equilibrium constant expression can be written as:

Ka = [A⁻][H⁺]/[HA]

At the half-equivalence point, [A⁻] = [HA] = 0.01 M. Therefore,

Ka = [H⁺]² / 0.01

[H^+] = sqrt(Ka x 0.01) = sqrt(6.31 x 10⁻⁵ x 0.01) = 7.94 x 10⁻⁴ M

pH = -log[H⁺] = -log(7.94 x 10⁻⁴) = 3.10

Therefore, the pH at the half-equivalence point is 3.10.

(c) At the equivalence point, all of the weak acid has been neutralized by the added base. Therefore, the concentration of the weak acid is zero, and the concentration of the conjugate base is equal to the initial concentration of the weak acid.

The number of moles of NaOH added at the equivalence point is:

0.5 L x 0.01 M = 0.005 moles

To know more about the Naproxen refer here :

https://brainly.com/question/5444482#

#SPJ11

The Molar solubility and the solubility of each salt at 25°C.

(a) PbF₂ Ksp = 4.0 x 10⁻⁸ ,  1.8 x 10⁻⁷ M, 4.41 x 10⁻⁵  g/L

(b) Ag₂CO₃ Ksp = 8.1 x 10⁻¹²,  1.2 x 10⁻⁴ M,  0.0398 g/L

(c) Bi₂S₃ Ksp = 1.6 x 10⁻⁷² , 3.2 x 10⁻¹⁶M,  1.65 x 10⁻¹³ g/L

(a) PbF₂:

Ksp = [Pb₂+][F-]²

Let x be the molar solubility of PbF₂. Then, [Pb2+] = x and [F-] = 2x. Substituting into the Ksp expression and solving for x:

4.0 x 10⁻⁸ = x*(2x)²

x = 1.8 x 10⁻⁷ M

To convert to g/L, we need to multiply by the molar mass of PbF₂ (245.2 g/mol):

solubility = 1.8 x 10^-7 * 245.2 = 4.41 x 10⁻⁵ g/L

(b) Ag₂CO₃:

Ksp = [Ag+]²[CO₃²⁻]

Let x be the molar solubility of Ag₂CO₃. Then, [Ag+] = 2x and [CO₃²⁻] = x. Substituting into the Ksp expression and solving for x:

8.1 x 10⁻¹² = (2x)² * x

x = 1.2 x 10⁻⁴ M

To convert to g/L, we need to multiply by the molar mass of Ag2CO3 (331.8 g/mol):

solubility = 1.2 x 10⁻⁴ * 331.8 = 0.0398 g/L

(c) Bi₂S₃:

Ksp = [Bi³⁺]²[S²⁻]³

Let x be the molar solubility of Bi₂S₃. Then, [Bi3+] = 2x and [S2-] = 3x. Substituting into the Ksp expression and solving for x:

1.6 x 10⁻⁷² = (2x)²*(3x)³

x = 3.2 x 10⁻¹⁶

To convert to g/L, we need to multiply by the molar mass of Bi₂S₃ (514.2 g/mol):

solubility = 3.2 x 10⁻¹⁶ * 514.2 = 1.65 x 10⁻¹³ g/L

In summary, using the suitable Ksp formula and solving for the unknown variable, we can compute the molar solubility and solubility in g/L of salt at a particular temperature. The molar solubility is represented in M units, but the solubility in g/L is calculated by multiplying the molar solubility by the salt's molar mass. The Ksp value indicates the salt's dissolving equilibrium constant and gives information on the relative solubility of various salts under the same circumstances.

Learn more about Molar Solubility:

https://brainly.com/question/28202068

#SPJ4

The equation ch4 + o2 --> co2 + h2o is balanced using the smallest possible integers, the coefficient for water is 2. To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. On the left side of the equation, we have one carbon atom, four hydrogen atoms, and two oxygen atoms.

The right side, we have one carbon atom, two hydrogen atoms, and two oxygen atoms from the carbon dioxide and water molecules. To balance the hydrogen atoms, we need to put a coefficient of 2 in front of the water molecule, which gives us 2H2O. This gives us a total of four hydrogen atoms on both sides of the equation. Now, we have two oxygen atoms on the left side and four on the right side. To balance the oxygen atoms, we need to put a coefficient of 2 in front of the oxygen molecule, which gives us 2O2. This gives us a total of four oxygen atoms on both sides of the equation. Finally, we have one carbon atom on both sides of the equation, which means that all the elements are balanced. Therefore, the coefficient for water is 2.

learn more about water here.

https://brainly.com/question/28465561

#SPJ11

Monodeuteriomethane is a type of molecule that contains one deuterium atom and three hydrogen atoms. In a disordered crystal of monodeuteriomethane, each tetrahedral CH3D molecule can be oriented randomly in one of four possible ways.

A) Using Boltzmann's formula, the entropy of the disordered state of a crystal containing 140 molecules can be calculated as S = klnW, where k is Boltzmann's constant and W is the number of microstates. The number of microstates for a crystal containing 140 molecules can be calculated as W = 4^140. Thus, S = kln(4^140) = 140kln4 + ln(140!) ≈ 1.69 × 10^25 J/K. B) To calculate the entropy of the disordered state of a crystal containing 1 mol of molecules, we need to know the Avogadro's number, which is approximately 6.022 × 10^23 molecules/mol. Thus, the number of molecules in 1 mol of monodeuteriomethane is 4 × 6.022 × 10^23 = 2.409 × 10^24 molecules. Using Boltzmann's formula, the entropy can be calculated as S = klnW, where W = 4^(2.409 × 10^24). Therefore, S ≈ 4.58 × 10^51 J/K. C) If the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 14 molecules, then there are only two possible orientations for each molecule. Thus, the number of microstates is W = 2^14, and the entropy can be calculated as S = kln(2^14) = 14kln2 ≈ 9.09 × 10^-22 J/K. D) If the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 140 molecules, then the number of microstates is W = 2^140, and the entropy can be calculated as S = kln(2^140) = 140kln2 ≈ 9.09 × 10^-20 J/K. E) To calculate the entropy of the crystal if the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 1 mol of molecules, we need to know the Avogadro's number. Thus, the number of molecules in 1 mol of monodeuteriomethane is 4 × 6.022 × 10^23 = 2.409 × 10^24 molecules. The number of microstates for 1 mol of monodeuteriomethane is W = 2^(2.409 × 10^24), and the entropy can be calculated as S = klnW. Therefore, S ≈ 4.54 × 10^50 J/K. In summary, the entropy of a crystal of monodeuteriomethane depends on the number of molecules in the crystal, the number of possible orientations for each molecule, and the direction of the C-D bond of each molecule. The more disordered the crystal, the higher the entropy, and the more ordered the crystal, the lower the entropy.

Learn more about hydrogen atoms here-

https://brainly.com/question/29695801

#SPJ11

The EPA stream quality indicator for dissolved oxygen in stream water is:c. 5 mg per liter

Dissolved oxygen (DO) is an important indicator of the health of a water body. The EPA (Environmental Protection Agency) has set guidelines for the minimum dissolved oxygen levels to support a healthy aquatic ecosystem. For streams, the recommended minimum level of dissolved oxygen is 5 mg per liter. This level ensures that the water can support a diverse range of aquatic life, including fish, invertebrates, and other organisms.
To maintain good water quality, it's essential to regularly monitor dissolved oxygen levels using various sampling methods and equipment. If dissolved oxygen levels drop below the recommended threshold, it can indicate problems such as pollution or excessive nutrient loading, which can lead to eutrophication and negatively impact the ecosystem.

Learn more about Dissolved oxygen Refer: https://brainly.com/question/29027453

#SPJ11

A heating curve illustrates the changes in the temperature and physical state of a substance as it is heated (Option D).

The changes in the temperature and physical state shows how the substance absorbs heat and undergoes changes in its physical state, such as melting or boiling, as its temperature increases. It does not illustrate chemical changes that may occur. It also indicates phase transitions, such as melting and boiling points, where the substance changes its physical state.

Learn more about heating curve: https://brainly.com/question/10481356

#SPJ11

Answer:

To answer these questions, we need to use stoichiometry and the ideal gas law.

1. To determine how many moles of ammonia will react with 4.6 moles of oxygen, we need to look at the balanced chemical equation and the mole ratio of ammonia to oxygen. From the balanced equation, we can see that 4 moles of NH3 react with 5 moles of O2. Therefore, we can set up a proportion:

4 moles NH3 / 5 moles O2 = x moles NH3 / 4.6 moles O2

Solving for x, we get:

x = 3.68 moles NH3

Therefore, 3.68 moles of ammonia will react with 4.6 moles of oxygen.

2. To determine how many milliliters of NO can be made by the reaction of 509 ml of oxygen, we need to use the ideal gas law. First, we need to find the number of moles of oxygen that react using the ideal gas law:

PV = nRT

n = PV/RT = (1 atm)(509 mL) / (0.0821 L·atm/mol·K)(273 K) = 20.1 x 10^-3 moles O2

From the balanced equation, we can see that 5 moles of O2 react with 4 moles of NO. Therefore, we can set up a proportion:

5 moles O2 / 4 moles NO = 20.1 x 10^-3 moles O2 / x moles NO

Solving for x, we get:

x = 16.1 x 10^-3 moles NO

Now, we can use the ideal gas law again to find the volume of NO produced:

PV = nRT

V = nRT/P = (16.1 x 10^-3 moles)(0.0821 L·atm/mol·K)(273 K) / (1 atm) = 0.35 L = 350 mL

Therefore, 350 mL of NO can be made by the reaction of 509 mL of oxygen.

3. To determine how many grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm, we need to use the ideal gas law again. First, we need to find the number of moles of NO using the ideal gas law:

PV = n

Explanation:

a. 3.68 moles of ammonia will react with 4.6 moles of oxygen.

b. 19.8 milliliters of NO can be produced from the reaction of 509 ml of oxygen.

c. Approximately 17,061.12 grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

To solve these stoichiometry problems, we'll use the balanced chemical equation and the given quantities to determine the required amounts.

The balanced chemical equation is:

4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g)

a. To find how many moles of ammonia will react with 4.6 moles of oxygen, we'll use the mole ratio from the balanced equation. According to the equation, the ratio of NH₃ to O₂ is 4:5.

Given:

Moles of O₂ = 4.6 moles

Using the ratio, we can calculate the moles of NH₃:

Moles of NH₃ = (4/5) * Moles of O₂

Moles of NH₃ = (4/5) * 4.6 moles

Moles of NH₃ = 3.68 moles

Therefore, 3.68 moles of ammonia will react with 4.6 moles of oxygen.

b. To determine how many milliliters of NO can be made by the reaction of 509 ml of oxygen, we'll again use the mole ratio from the balanced equation. This time, we need to convert the volume from milliliters to liters and then use the ideal gas law to find the number of moles of NO.

Given:

Volume of O₂ = 509 ml

Temperature = Constant

Pressure = Constant

First, we convert the volume to liters:

Volume of O₂ = 509 ml ÷ 1000

Volume of O₂ = 0.509 L

Next, we'll use the ideal gas law to calculate the moles of O₂:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

Since pressure and temperature are constant, we can rewrite the equation as:

V / n = constant

Using the mole ratio from the balanced equation (5:4), we can determine the moles of NO:

(Moles of O₂) / (Mole ratio O₂:NO) = Moles of NO

0.509 L / (5/4) = Moles of NO

0.509 L * (4/5) = Moles of NO

0.4072 moles = Moles of NO

Now, we need to convert moles of NO to milliliters using the ideal gas law again:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

We'll assume ideal gas behavior, so we'll use the ideal gas constant (R = 0.0821 L·atm/(mol·K)).

Using the given pressure and temperature, we can rearrange the ideal gas law equation to solve for volume:

V = (nRT) / P

Converting the temperature to Kelvin:

Temperature = 7.00 °C + 273.15 = 280.15 K

Converting pressure from atm to millimeters of mercury (mmHg):

Pressure = 5.31 atm * 760 mmHg/atm

Pressure = 4033.76 mmHg

Now we can calculate the volume of NO:

V = (0.4072 moles * 0.0821 L·atm/(mol·K) * 280.15 K) / 4033.76 mmHg

V = 0.0198 L = 19.8 ml

Therefore, 19.8 milliliters of NO can be produced from the reaction of 509 ml of oxygen.

c. To find the grams of oxygen required to produce 27 L of NO, we'll again use the mole ratio from the balanced equation and the ideal gas law.

Given:

Volume of NO = 27 L

Temperature = 7.00 °C = 280.15 K

Pressure = 5.31 atm

First, we need to calculate the moles of NO:

Using the ideal gas law:

PV = nRT

Where:

P = Pressure

V = Volume

n = Moles

R = Ideal gas constant

T = Temperature

Converting pressure from atm to millimeters of mercury (mmHg):

Pressure = 5.31 atm * 760 mmHg/atm

Pressure = 4033.76 mmHg

Now we can calculate the moles of NO:

n = (PV) / (RT)

n = (4033.76 mmHg * 27 L) / (0.0821 L·atm/(mol·K) * 280.15 K)

n ≈ 424.68 moles

Using the mole ratio from the balanced equation (5:4), we can determine the moles of oxygen:

Moles of O₂ = (Moles of NO) / (Mole ratio O₂:NO)

Moles of O₂ = 424.68 moles * (5/4)

Moles of O₂ ≈ 530.85 moles

Finally, we'll calculate the mass of oxygen:

Mass of O₂ = Moles of O₂ * Molar mass of O₂

The molar mass of O₂ is 32 g/mol (16 g/mol for each oxygen atom).

Mass of O₂ = 530.85 moles * 32 g/mol

Mass of O₂ ≈ 17,061.12 grams

Therefore, approximately 17,061.12 grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

To know more about oxygen:

https://brainly.com/question/29149641

#SPJ2

Complete question is:

4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(g)

a. How many moles of ammonia will react with 4.6 moles of oxygen?

b. At constant temperature and pressure, how many milliliters of NO can be made by the reaction of 509 ml of oxygen?

c. How many grams of oxygen must react to produce 27 L of NO measured at 7.00 °C and 5.31 atm.

The percent yield of zinc carbonate is 5.91%. This suggests that the reaction did not go to completion, and there was likely some loss of product during the experiment.

To find the percent yield of zinc carbonate, we need to compare the actual yield (what was obtained in the experiment) to the theoretical yield (what would be obtained if the reaction went to completion).

First, let's calculate the theoretical yield of zinc carbonate:

Now, let's calculate the percent yield:

The actual yield  [tex]ZnCO_{3}[/tex] is given as 12.6 g.

The percent yield is calculated as:

Learn more about zinc carbonate

https://brainly.com/question/31114294

#SPJ4

Full Question: A reaction between 1.7 moles of zinc iodide and excess sodium carbonate yields 12.6 grams of zinc carbonate. This is the equation for the reaction: Na2CO3 + ZnI2 → 2NaI + ZnCO3. What is the percent yield of zinc carbonate? The percent yield of zinc carbonate is %

Answer:

d

Explanation:

The neutralization reaction between an acid and base is given as,

"H₂CO₃ + KOH → K₂CO₃ + H₂O"

Generally a neutralization reaction is usually described as a chemical reaction which involves reaction of an acid and a base and they react quantitatively together in order to form a salt and water as by-products. Basically in a neutralization reaction, a combination of H⁺ ions and OH⁻ ions is present which effectively forms water.

So, the products formed from neutralization reactions are salt and water. Generally the pH of the salt and water solution is always neutral (pH =7).

Hence, the neutralization reaction is given as,

"H₂CO₃ + KOH → K₂CO₃ + H₂O"

Learn more about neutralization reaction from the link given below.

https://brainly.com/question/28970253

#SPJ1

pH 1st = [tex][H+] = sqrt(Ka*[HA]) = sqrt(1.5 * 10^{-2} * 0.000565) = 0.00576 M[/tex]. The pH at the equivalence point of the second stage will be higher than that of the first stage due to the excess of NaOH.

For more such question on pH

https://brainly.com/question/12609985

#SPJ11

The energy hump corresponds to the energy barrier existing between the reactants and products. The reactants must first acquire a certain amount of energy to reach the level of threshold energy.

The minimum excess energy that the reactants must acquire so as to have energy equals to the threshold energy is the activation energy.

Activation energy =  Peak energy - Energy of reactant

1. 80 - 0 = 80 kJ

2. Here letter 'E' represents activation energy

3. Change in energy = Energy of product - energy of reactant

20 - 0 = 20 kJ

4. The reaction is endothermic

5. A catalyst does not change the activation energy, it is 80 kJ

6. The letter is also E.

To know more about activation energy, visit;

https://brainly.com/question/29250169

#SPJ1

The stoichiometric concept is used here to determine the mass of Fe₂O₃. The term chemical stoichiometry is the quantitative study of the reactants and products involved in a chemical reaction. Here the mass of Fe₂O₃ is 507 g.

Stoichiometry is an important concept in chemistry which helps us to use the balanced chemical equations to find out the mass of products and reactants. Here we make use of the ratios from the balanced equation.

The molar masses of Fe₂O₃ and Al₂O₃ are 159.687 g and 101.961 g, respectively.

Mass of Fe₂O₃ = 324 g Al₂O₃ × 1 mol Al₂O₃ / 101.961 g Al₂O₃ × 1 mol Fe₂O₃/ 1 mol Al₂O₃ × 159.687 g Fe₂O₃ / 1 mol Fe₂O₃ = 507 g

To know more about Stoichiometry, visit;

https://brainly.com/question/29775083

#SPJ1

Answer:

The volume of isopropyl alcohol in the solution is 178.5 ml, which is approximately 85% of the total volume of the solution.

Explanation:

To calculate the volume of isopropyl alcohol in the solution, we can use the following formula:

The volume of isopropyl alcohol = Percentage of isopropyl alcohol x Volume of solution

Substituting the given values, we have:

The Volume of isopropyl alcohol = 0.85 x 210 ml

The volume of isopropyl alcohol = 178.5 ml

Therefore, 178.5 ml of the solution is made up of isopropyl alcohol.

Therefore, the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions is -271.5 kJ/mol.

To calculate the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions, we need to use the standard thermodynamic data at 298K. The standard thermodynamic data provides us with the standard free energy change of formation for each compound involved in the reaction.

Using the given reaction equation, we can write the overall reaction as:

3Fe2O3(s) + H2(g) → 2Fe3O4(s) + H2O(g)

Using the standard free energy change of formation values for each compound, we can calculate the standard free energy change of the reaction (ΔG°rxn) using the equation:

ΔG°rxn = ΣnΔG°f(products) - ΣnΔG°f(reactants)

where Σn represents the sum of the stoichiometric coefficients of each compound.

At 298K, the standard free energy change of formation values for the compounds involved in the reaction are:

ΔG°f(Fe2O3) = -824.2 kJ/mol
ΔG°f(H2) = 0 kJ/mol
ΔG°f(Fe3O4) = -1118.5 kJ/mol
ΔG°f(H2O) = -237.2 kJ/mol

Plugging these values into the equation for ΔG°rxn, we get:

ΔG°rxn = (2 mol x (-1118.5 kJ/mol)) + (1 mol x (-237.2 kJ/mol)) - (3 mol x (-824.2 kJ/mol))
ΔG°rxn = -271.5 kJ/mol

Therefore, the free energy change when 1.76 moles of Fe2O3(s) react at standard conditions is -271.5 kJ/mol.

To know more about free energy change click here:

https://brainly.com/question/31170437

#SPJ11

The complete table that figures out which particles affect each component of the atomic symbol is attached below.

Particles such as protons, neutrons, and electrons affect the atomic symbol in different ways:

Protons determine the element symbol. Each element has a unique number of protons in its nucleus, which is also known as its atomic number.

Electrons determine the charge of the atom. If the number of electrons is equal to the number of protons, the atom is electrically neutral.

Neutrons, along with protons, determine the atomic mass of the atom. The atomic mass is the sum of the number of protons and neutrons in the nucleus of an atom.

Find out more on particles here: https://brainly.com/question/27911483

#SPJ1

Answer:

Here is my project that I turned in for this assignment :) It has all the answers including the graph, answers to the questions, and the summary paragraph. I also labeled the parts to make it easier for you see which part is which. Lastly I'm very sorry if my handwriting is not readable for you :( but I tried my best to help.

Explanation:

The acid mantle is formed by a combination of sweat and sebum secretions from our skin. These secretions create a slightly acidic environment on the skin's surface.

The acid mantle is formed by a combination of sebum (oil) secreted by the skin's sebaceous glands and sweat secreted by sweat glands. The sebum and sweat combine to create a slightly acidic film on the surface of the skin, which helps to protect it from harmful bacteria and environmental pollutants. This film also helps to keep the skin hydrated and maintain its natural pH balance.

To learn more about, acid mantle, click here, https://brainly.com/question/26466242

#SPJ11

The H₂0 ion concentration of a solution is (1 x 10⁻⁴) mole per liter. To determine the pH of the solution, we can use the equation pH = -log[H+], where [H+] represents the hydrogen ion concentration. The correct answer is A) acidic and has a pH of 4.

In this case, the hydrogen ion concentration is (1 x 10⁻⁴) mole per liter. Taking the negative logarithm of this concentration, we have:

pH = -log((1 x 10⁻⁴)) = -(-4) = 4

Therefore, the solution is acidic and has a pH of 4.

The correct answer is A) acidic and has a pH of 4.

Learn more about concentration ,

https://brainly.com/question/10725862

#SPJ4

The major product of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] reaction is 1,2-dibromoethane, with anti-stereochemistry, and optically inactive stereoisomers.

The response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] will go through a halogenation response, where the bromine molecules will be added across the twofold bond. The significant result of this response is 1,2-dibromoethane.

The component of this response includes the development of a bromonium particle halfway, where the bromine atom is captivated by the twofold obligation of the alkene. The bromine particle will then, at that point, assault one of the carbons of the twofold bond, framing a bromonium particle halfway.

The bromine particle will then go after the other carbon of the twofold bond, breaking the bromonium particle middle and framing the item.The option of the bromine particles to the twofold bond happens with against stereochemistry, implying that the two bromine molecules will be added to inverse countenances of the twofold bond.

This outcomes in the development of a meso compound with two stereoisomers. Be that as it may, since both stereoisomers have an inward plane of balance, they are optically latent.

In this way, the significant result of the response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] is 1,2-dibromoethane, with two stereoisomers that are optically dormant because of their inward plane of evenness.

To learn more about stereochemistry reactions, refer:

https://brainly.com/question/29748314

#SPJ4

The enthlpy of the reaction can be calculated as 720 kJ/mol.

Enthalpy is a thermodynamic property that is related to the internal energy and the work done by or on a system. If the enthalpy change is positive, it means that the reaction is endothermic and absorbs heat from the surroundings.

We know that reaction enthalpy = Bonds broken - Bonds formed

Thus we have that;

[4(413) + 4(240)] - [4(416) + 4(432)]

(1652 + 960) - (1664 + 1728)

2612 - 1892

= 720 kJ/mol

Learn more about reaction enthalpy:https://brainly.com/question/1657608

#SPJ1

The compound with the highest melting point according to the ionic bonding model would be CaO (calcium oxide).

For more such question on melting point

https://brainly.com/question/25165129

#SPJ11