Suppose a vessel contains ClCH2CH2Cl at a concentration of 0. 810M. Calculate the concentration of ClCH2CH2Cl in the vessel 6. 20 seconds later. You may assume no other reaction is important. Round your answer to 2 significant digits

Answer:

There are several sources of errors when reading a thermometer. Some common sources include limitations in digital processing and physical issues with the device itself, errors with the sensor which is often the greatest source of error, and measurement error which can depend on the skill of the operator. An “Err” message can also appear on a thermometer’s display if the sensor is too warm before powering on, if the temperature reading is incomplete, or if there is an internal problem with the thermometer.

Modern chemical fertilizers include one or more of the three elements that are most important in plant nutrition: nitrogen, phosphorus, and potassium. Of secondary importance are the elements sulfur, magnesium, and calcium.

Answer: The most common useful element in fertilizer is mostly nitrogen since it is also found in air

Answer:

524.21 g/mol

Explanation:

The molar mass of a compound is the sum of the atomic masses of all the atoms in its chemical formula. The molecular formula of Prussian Blue is Fe(CN)18.

The atomic mass of iron (Fe) is 55.85 g/mol. The atomic mass of carbon is 12.01 g/mol and the atomic mass of nitrogen (N) is 14.01 g/mol. So the molar mass of the CN group is 12.01 g/mol + 14.01 g/mol = 26.02 g/mol.

Since there are 18 CN groups in one molecule of Prussian Blue, the total contribution of the CN groups to the molar mass of Prussian Blue is 18 × 26.02 g/mol = 468.36 g/mol.

So the molar mass of Prussian Blue is 55.85 g/mol + 468.36 g/mol = 524.21 g/mol.

Santa Catarina is the tropical storm having wind speed range between 30-80°C that would experience more rainfall as it has more sustained surface wind speed.  

The maximum sustained surface wind speed for a tropical storm ranges from 39 to 73 mph. Due to Santa Catarina's proximity to the Atlantic Ocean, there should be an equal amount of water vapor in the air in the form of moisture in the breezes.

As a result, tropical cyclones mostly form in regions with temperatures between 5 and 30 degrees that are close to the equator. The closeness of Atlantic Ocean also causes tropical storms to form near the surface.

To know more about tropical storms, refer:

https://brainly.com/question/23371772

#SPJ4

Correct question is:

The temperature of the areas surrounding Santa Catarina before each storm was about 13°C, and there was the same amount of water vapor in the air. Given this information, which storm do you predict will have the most rainfall, and why?

(Refer the images for the phases of storms.)

The solvents that are not suitable for liquid-liquid extraction of an aqueous layer are 1. n-pentane, 3. hexanes, and 6. isopropanol.

Liquid-liquid extraction (LLE) is a separation process that is commonly used in the laboratory to separate and purify a solvent-containing dissolved solute mixture. Liquid-liquid extraction may be utilized to segregate an aqueous solution containing one or more organic solutes from a complex mixture of organic solutes or to remove a neutral substance from an acidic or basic aqueous solution. The process entails dissolving a compound or compounds from one solvent into another and then separating the newly formed two-phase system.

The solvents that are not suitable for liquid-liquid extraction of an aqueous layer are as follows:

1. n-pentane 3. hexanes 6. isopropanol

The following solvents are suitable for liquid-liquid extraction of an aqueous layer:

2. dimethyl sulfoxide 4. dichloromethane 5. toluene

Know more about aqueous layer

https://brainly.com/question/14567984

#SPJ11

Explanation:

1 sodium must contain free eelctron cuz electricity is created due to flow of electron

2 suspension

1. To conduct electricity, a solution must contain ions and free electrons.

2. The particles in a suspension can be separated from heterogeneous mixtures by passing the mixture through a filter.

3. Solutions - Smaller than 1 nm

Colloids - 1 nm to 1000 nm

Suspensions - Larger than 1000 nm

In a solution, ions can be present when an ionic compound dissolves and dissociates into its constituent ions. These ions can move freely within the solution, allowing for the conduction of electricity.

Free electrons are not bound to any specific atom and are able to move through the material, facilitating the flow of electric current.

A suspension is a heterogeneous mixture in which solid particles are dispersed in a liquid or gas medium.

Solutions contain particles that are smaller than 1 nanometer (nm) in size. Colloids consist of particles that range in size from 1 nm to 1000 nm. Suspensions contain particles that are larger than 1000 nm in size.

To learn more about the electricity, follow the link:

https://brainly.com/question/33513737

#SPJ6

The volume (in liters) of NO₂ present in 80.0 grams at STP is 38.98 L

We'll begin by obtaining the number of mole present in 80 grams of NO₂. Details below:

Mole of NO₂ = mass / molar mass

Mole of NO₂ = 80 / 46

Mole of NO₂ = 1.74 moles

Finally, we shall determine the volume at STP. Details below:

1 mole of NO₂ = 22.4 L at STP

Thus,

1.74 mole of NO₂ = 1.74 × 22.4

1.74 mole of NO₂ = 38.98 L

Thus, we can conclude that the volume of NO₂ is 38.98 L

Learn more about volume:

https://brainly.com/question/22311771

#SPJ1

Answer:

Explanation:

1) 1; 1; 2

2) 2; 6; 2; 3

Answer: NH4NO3 ⟶ 2N2O + 4H2O (balanced equation)

Coefficients: 1, 2, 4

2Fe + 6HCl ⟶ 2FeCl3 + 3H2 (balanced equation)

Coefficients: 2, 6, 2, 3

Your welcome stranger. (:

The equivalency solution has a pH of 2.624.

Nitrous acid is frequently created by adding a mineral acid to aqueous sodium nitrite solutions. Typically, acidification is carried out at ice-cold temperatures, and HNO2 is consumed on-site. Nitrous acid in its free form is unstable and breaks down quickly.

In a neutralization process, weak nitrous acid (HNO2) reacts with strong basic KOH.

HNO2 + KOH → KNO2 + H2O

Then, we determine how many moles of KOH were used:

volume KOH x concentration equals moles KOH. KOH

moles KOH = 0.190 L x 0.377 mol/L

moles KOH = 0.07153 mol

Next, we calculate the initial concentration of HNO2:

concentration HNO2 = moles HNO2 / volume HNO2

concentration HNO2 = 0.07153 mol / 0.190 L

concentration HNO2 = 0.3765 M

[HNO2] = 0.5 x 0.3765 M

[HNO2] = 0.1883 M

The following equation can be used to model how nitrous acid dissociates in water:

HNO2 + H2O ⇌ H3O+ + NO2-

The following equation relates the pKa to the acid dissociation constant, Ka, for this reaction:

pKa = -log Ka

So we can find the Ka value from the given pKa:

pKa = -log Ka

3.35 = -log Ka

Ka = 10⁻³

Ka = 4.47 x 10⁻⁴

The relationship shown below is true for the concentrations of the species involved at equilibrium:

Ka = [H3O+][NO2-] / [HNO2]

Ka = [H3O+][NO2-] / [HNO2]

Ka = [H3O+] [HNO2]

Solving for [H3O+], we get:

[H3O+] = Ka / [HNO2]

[H3O+] = (4.47 x 10⁻⁴) / (0.1883 M)

[H3O+] = 0.002374 M

Finally, we can calculate the pH of the solution:

pH = -log[H3O+]

pH = -log(0.002374)

pH = 2.624

To know more about nitrous acid solution visit:-

https://brainly.com/question/17011556

#SPJ1

please make me brainalist and keep smiling dude

Clouds form behind a cold front and ahead of a warm front because of the difference in temperature and moisture between the two air masses.

When a cold front, which is an area of colder air, meets a warm front, which is an area of warmer air, the colder air forces the warmer air to rise. As the warmer air rises, it cools and the moisture in the air condenses to form clouds. This process is called adiabatic cooling.

Similarly, when a warm front meets a cold front, the warmer air rises over the colder air and cools, forming clouds. However, because the warm air is less dense than the cold air, it rises more slowly and the clouds that form are typically less dense and less likely to produce precipitation.

In both cases, the difference in temperature and moisture between the two air masses leads to the formation of clouds. This is why we often see clouds forming behind a cold front and ahead of a warm front.

For more question on Clouds click on

https://brainly.com/question/2941398

#SPJ11

Here are the number of unpaired electrons for each of the given atoms:

Y: 0, Br: 1 , Ca: 0, Sn: 2, Br: 1

In order to determine the number of unpaired electrons for each of the given atoms, we need to look at the electron configuration for each atom.

Y (yttrium): Y has an electron configuration of [Kr] 4d¹⁰ 5s². This means that Y has a completely filled 4d subshell and no unpaired electrons.

Br (bromine): Br has an electron configuration of [Ar] 3d¹⁰ 4s² 4p⁵. This means that Br has seven electrons in its outermost energy level (4p⁵), and one of these electrons is unpaired.

Ca (calcium): Ca has an electron configuration of [Ar] 4s². This means that Ca has two electrons in its outermost energy level (4s²), and both of these electrons are paired.

Sn (tin): Sn has an electron configuration of [Kr] 4d¹⁰ 5s² 5p². This means that Sn has two electrons in its outermost energy level (5p²), and one of these electrons is unpaired.

Br (bromine): As above, Br has an electron configuration of [Ar] 3d¹⁰ 4s² 4p⁵. This means that Br has seven electrons in its outermost energy level (4p⁵), and one of these electrons is unpaired.

For more question on electrons click on

https://brainly.com/question/371590

#SPJ11

correct form of question should be:

The formula 3Mg(O3H2)3 denotes a molecule made up of three magnesium atoms and nine groups of hydroxide ions (O3H2), each of which contains three oxygen atoms and six hydrogen atoms.

What exactly is a molecule?

A molecule is a collection of two or even more than two atoms that are held together by chemical-bonds. These atoms could be of the same element or of different elements. H2O (water), for example, is a molecule composed of two (2) hydrogen atoms and one oxygen atom.

CO2 (Carbon dioxide) is just another example of the molecule made up of 1-carbon atom and 2-oxygen atoms. Molecules are the basic building blocks of many substances, and their unique arrangement and properties play an important role in a wide range of chemical reactions and biological processes.

To learn more about molecule, visit: brainly.com/question/475709

#SPJ1

Answer:

A the volume of the ballon will decrease

Explanation:

This is because the temperature decreased so the particles slowed down and need less room or volume to move around and collide in

Answer:

cholorobutanol good luck ;⁠)B⁠-⁠)

Answer:

1.glass

2.tungstan is going to expire

3.bulb is fuse

4.led

Answer: Put the list in chronological order (1–5). Allow the solid/liquid mixture to drain through the filter. Use water to rinse the filter paper containing the mixture. Place the filter paper in the funnel, then place the funnel in the Erlenmeyer flask. Weigh the dried filter paper and copper. Weigh and fold the filter paper

Place the filter paper in the funnel, then place the funnel in the Erlenmeyer flask.

Allow the solid/liquid mixture to drain through the filter.

Use water to rinse the filter paper containing the mixture.

Weigh and fold the filter paper.

Weigh the dried filter paper and copper.

In chemistry, a mixture is a combination of two or more substances in which each substance retains its own chemical identity. Mixtures can be classified into homogeneous and heterogeneous. Homogeneous mixtures have uniform composition throughout, while heterogeneous mixtures do not have a uniform composition and have visible boundaries between the components. Examples of mixtures include air, saltwater, and blood.

To know more about mixture,

https://brainly.com/question/20693490

#SPJ9

Complete question:

Put the list in chronological order (1–5).

Allow the solid/liquid mixture to drain through the filter.

Use water to rinse the filter paper containing the mixture.

Place the filter paper in the funnel, then place the funnel in the Erlenmeyer flask.

Weigh the dried filter paper and copper.

Weigh and fold the filter paper.

[tex] \mathbb{ANSWER:}[/tex]

Solvents can also be solid and gas not only liquid.

31,146.4 Joules of heat were applied to the beaker.

The amount of heat (q) required to heat a substance is given by:

q = m × c × ΔT

where:

m = mass of the substance

c = specific heat capacity of substance

ΔT = change in temperature

For water, the specific heat capacity (c) is 4.184 J/g°C.

The mass of water (m) is 100g.

The change in temperature (ΔT) is (99°C - 25°C) = 74°C.

Therefore, the amount of heat (q) required to heat the water is:

q = 100g × 4.184 J/g°C × 74°C

q = 31,146.4 J

Therefore, approximately 31,146.4 Joules of heat were applied to the beaker.

To know more about heat here

https://brainly.com/question/17039550

#SPJ4

Answer: 7.47 M

Explanation:

Molarity is moles/ liters

Liters= 0.75 L

moles = 325 g/58 g(mass from Periodic table for NaCl) =5.60 mole

5.60/0.75= 7.47

Answer:

Inversely proportional.

Explanation:

The density and temperature relationship for ideal gases is mathematically written as- Density and Temperature Relationship The density and temperature relation are proportionate. That is, the density is inversely proportional to temperature.

Answer:

“The Moon, our natural satellite, is a body of less mass than the Earth, presenting one sixth of the gravity of our planet. … Since the Moon is about 1/49th the mass of Earth, it will have less gravity.

Explanation:

Answer:

21.58 mL

Explanation:

this is Charles' law

V1/T1 = V2/T2

Temperature must be in Kelvin

V2= V1 X T2 / T1

32.2  x203.15 / 303.15

dont need pressure since its the same.

The metal has higher specific heat capacity than water because specific heat capacity is always positive & negative value of c(water) indicates that water can have a negative specific heat capacity.

The amount of heat required to increase the temperature of 1 gram of a substance by 1 degree Celsius (°C) is known as specific heat.

According to formula

q = m x c x ΔT

where q amount of heat absorbed or released, m mass of the substance, c specific heat capacity of the substance, and ΔT change in temperature.

We can start by finding the amount of heat released by the metal:

q(metal) = m x c(metal) x ΔT(metal)

q(metal)= 10 g x c(metal)x (100°C - 35°C)

q(metal)= 650 g°C x c(metal)

We can also find the amount of heat absorbed by the water:

q(water) = m x c(water) x ΔT(water)

q(water)= 10 g x c(water) x (35°C - 20°C)

q(water)= 150 g°C x c(water)

Since the metal releases heat and the water absorbs heat, we know that q(metal) = -q(water) (i.e., the heat lost by the metal is gained by the water).

Therefore:

650 g°C x c(metal) = -150 g°C x c(water)

Solving for c(water), we get:

c(water) = -650/150 x c(metal)

c(water) = -4.33 x c(metal)

Since specific heat capacity is always positive, we know that c(water) is negative in this case. This indicates that water cannot have a negative specific heat capacity. Therefore, the metal has a higher specific heat capacity than water.

To know more about specific heat visit :

https://brainly.com/question/11297584

#SPJ1

chemical isotope analysis is particularly useful for considering ancient diets because it provides information that cannot be obtained from other sources.

Chemical isotope analysis is particularly useful for considering ancient diets because it can reveal the types of foods that were consumed by ancient people. This type of analysis is based on the fact that different isotopes of elements such as carbon, nitrogen, and oxygen are found in different types of foods.

For example, the isotopes of carbon found in wheat and barley are different from those found in meat and dairy products. By analyzing the isotopes of carbon, nitrogen, and oxygen in the bones and teeth of ancient people, researchers can determine what types of foods were consumed by these people.

This information can help researchers to understand how ancient people lived, what types of foods they ate, and how their diets may have affected their health and well-being. It can also provide insight into how food production and consumption patterns have changed over time.

Learn more about isotopes here:

https://brainly.com/question/13537430

#SPJ11

The poster showing the primary colors are found in the attachment.

The primary colors of light are red, green, and blue. By combining these three colors in different ways, all other colors in the visible spectrum can be produced.

The primary colors of pigment are cyan, magenta, and yellow. By mixing these three pigments in different proportions, all other colors can be produced. It is important to note that the primary colors of pigment are different from the primary colors of light, which can sometimes cause confusion.

Learn more about primary colors at: https://brainly.com/question/2222155

#SPJ1

The pKa of [tex]NH^{4+[/tex] would be 9.51.

To solve the problem, we can use the equation for the ionization constant of a weak base, Kb:

Since NH3 is a weak base, we can assume that the concentration of OH- ions produced by water is negligible. Thus, we can simplify the equation to:

The equilibrium expression for the ionization of NH3 can be written as:

The equilibrium constant for this reaction is:

Since the concentration of OH- is negligible, we can assume that:

Substituting Kb and Kw into the equation above, we get:

Since NH3 is only 1.1% ionized, we can assume that [NH4+] ≈ [OH-] = 5.6 x 10^-10

Using the equation for the ionization constant of NH4+, we get:

Since NH3 is a weak base, we can assume that [H3O+] ≈ [OH-] = 5.6 x 10^-10

Substituting the values into the equation, we get:

Ka = (0.15 x 0.011)/(5.6 x 10^-10) = 3.1 x 10^-10

Finally, we can use the relationship between Ka and pKa:

pKa = -log(Ka) = -log(3.1 x 10^-10) = 9.51

Therefore, the pKa of NH4+ is 9.51.

More on pKa can be found here: https://brainly.com/question/30419524

#SPJ1