Superman's average rate is 50 meters per second. Every 12 second superman flies 600 meters. Superman is 900 meters from Lois.
To find Superman's average rate, we need to find the change in distance divided by the change in time:
Average rate = (change in distance) / (change in time)
From 6 seconds to 9 seconds, Superman travels a distance of 1800 - 1650 = 150 meters. So the change in distance is 150 meters, and the change in time is 9 - 6 = 3 seconds.
Average rate = (150 meters) / (3 seconds) = 50 meters per second
To find how far Superman flies in 12 seconds, we can use the average rate:
Distance = (average rate) x (time)
Distance = (50 meters per second) x (12 seconds) = 600 meters
To find how close Superman is to Lois after 21 seconds, we need to use the same formula again, using the new distance and time values:
Distance = (average rate) x (time)
From 6 seconds to 21 seconds, Superman travels a distance of 1800 - x, where x is the distance he is from Lois after 21 seconds. So the change in distance is (1800 - x) - 1800 = -x, and the change in time is 21 - 6 = 15 seconds.
Average rate = (-x meters) / (15 seconds) = -x/15 meters per second
We don't know the value of x yet, but we can use the average rate and the formula for distance to set up an equation:
x = (average rate) x (time) + initial distance
x = (-x/15 meters per second) x (15 seconds) + 1800 meters
Simplifying this equation gives:
x = 1800 / 2 = 900 meters
So after 21 seconds, Superman is 900 meters from Lois.
Learn more about distance at https://brainly.com/question/2967625
#SPJ11
The president of Doerman Distributors, Inc., believes that 27% of the firm's orders come from first-time cu:
sample of 100 orders will be used to estimate the proportion of first-time customers. Use z-table.
0.30. What is the sampling distribution of p for this study?
a. Assume that the president is correct and p
=
Hint(s) Che
A normal distribution because np and n(1-p) are both greater than 5 v
b. What is the probability that the sample proportion will be between 0.20 and 0.40 (to 4 decimals)?
c. What is the probability that the sample proportion will be between 0.25 and 0.35 (to 4 decimals)?
Hide Feedback
Partially Correct
The president of Doerman Distributors, Inc., believes that 27% of the firm's orders come from first-time cu:
sample of 100 orders will be used to estimate the proportion of first-time customers. Use z-table.
0.30. What is the sampling distribution of p for this study?
a. Assume that the president is correct and p
=
Hint(s) Che
A normal distribution because np and n(1-p) are both greater than 5 v
b. What is the probability that the sample proportion will be between 0.20 and 0.40 (to 4 decimals)?
c. What is the probability that the sample proportion will be between 0.25 and 0.35 (to 4 decimals)?
Hide Feedback
Partially Correct
Answer:
Step-by-step explanation:
Please mark me the brainliest
a. Since the sample size is large enough (n=100) and the expected number of first-time customers (np=27) and the expected number of repeating customers (n(1-p)=73) are both greater than 5, we can assume that the sampling distribution of the sample proportion p is approximately normal with mean μ=p=0.27 and standard deviation σ=sqrt[p(1-p)/n]=sqrt[(0.27)(0.73)/100]=0.046.
b. To find the probability that the sample proportion will be between 0.20 and 0.40, we need to standardize the values using the formula z = (x - μ) / σ, where x is the sample proportion, μ is the population proportion, and σ is the standard deviation of the sampling distribution of p. Then we can use a standard normal distribution table (z-table) to find the corresponding probabilities.
z(0.20) = (0.20 - 0.27) / 0.046 = -1.52
z(0.40) = (0.40 - 0.27) / 0.046 = 2.83
Using the z-table, the probability of getting a z-score between -1.52 and 2.83 is approximately 0.9747. Therefore, the probability that the sample proportion will be between 0.20 and 0.40 is 0.9747 (to 4 decimals).
c. To find the probability that the sample proportion will be between 0.25 and 0.35, we can follow the same steps as in part b:
z(0.25) = (0.25 - 0.27) / 0.046 = -0.43
z(0.35) = (0.35 - 0.27) / 0.046 = 1.74
Using the z-table, the probability of getting a z-score between -0.43 and 1.74 is approximately 0.5267. Therefore, the probability that the sample proportion will be between 0.25 and 0.35 is 0.5267 (to 4 decimals).
An online poll asked: "Do you believe the Loch Ness monster exists?" Among 21,466 responses, 62% were "yes." Use a 0.10 significance level to test the claim that most people believe that the Loch Ness monster exists. How is the conclusion affected by the fact that Internet users who saw the question could decide whether to respond?
Identify the null and alternative hypotheses for this test. Choose the correct answer below.
OA H_{0} / p = 0.5 H_{1} / p > 0.5
OB. H_{0} / p = 0.5 H_{1} :p ne0.5
OC. H_{0} / p = 0.5 H_{1} / p < 0.5
OD. H_{0} / p > 0.5 H_{1} / D = 0.5
Who are more likely to respond to an online poll about the Loch Ness monster may not be representative of the general population, and may have different beliefs about its existence.
The correct answer is: H0: p <= 0.5, H1: p > 0.5
Explanation:
The null hypothesis (H0) is that the proportion of people who believe that the Loch Ness monster exists is less than or equal to 0.5. The alternative hypothesis (H1) is that the proportion is greater than 0.5.
This is a one-tailed test, since we are only interested in whether the proportion is greater than 0.5.
The fact that Internet users who saw the question could decide whether to respond may affect the conclusion of the test, as it introduces potential bias into the sample. Those who are more likely to respond to an online poll about the Loch Ness monster may not be representative of the general population, and may have different beliefs about its existence.
To learn more about representative visit:
https://brainly.com/question/19000815
#SPJ11
a put option is a security that gives its holder the opportunity either to sell something, such as 100 shares of common stock at a certain price, or to do nothing and therefore not transact. 1. True 2. False
The statement is true. A put option is a financial contract that provides the holder with the right, but not the obligation, to sell an underlying asset, such as 100 shares of common stock, at a predetermined price, known as the strike price, before or at the expiration date of the option. If the price of the asset decreases below the strike price, the holder of the put option can sell the asset at the higher strike price and make a profit. However, if the price of the asset increases above the strike price, the holder can simply do nothing and let the option expire, without any obligation to sell the asset.
The price of a put option is influenced by various factors, such as the price of the underlying asset, the strike price, the time until expiration, and the volatility of the asset's price. Generally, the higher the volatility and the longer the time until expiration, the higher the price of the put option.
Selling a put option involves taking on the obligation to buy the underlying asset at the strike price, if the holder decides to exercise the option. Selling put options can be a strategy for generating income, but it also involves risks, such as potential losses if the price of the asset decreases significantly.
In summary, a put option is a security that provides the holder with the right to sell an underlying asset at a predetermined price, but not the obligation to do so. The price of a put option is influenced by various factors, and selling a put option involves taking on the obligation to buy the asset.
More questions on sell : https://brainly.com/question/29988302
#SPJ11
outside temperature over a day can be modelled as a sinusoidal function. suppose you know the high temperature of 89 degrees occurs at 5 pm and the average temperature for the day is 80 degrees. assuming t is the number of hours since midnight, find an equation for the temperature, d, in terms of t.
The equation for the temperature, d, in terms of t is:
d(t) = 9 * cos[(π/12) * (t - 17)] + 80
To create an equation for the temperature, d, in terms of t, we will use the information given: the high temperature of 89 degrees at 5 pm and the average temperature of 80 degrees.
Determine the amplitude (A) of the sinusoidal function.
Amplitude = (High Temperature - Average Temperature)
A = (89 - 80)
A = 9
Determine the period (P) of the sinusoidal function.
Since the temperature pattern repeats every 24 hours, the period is 24 hours.
Determine the horizontal shift (HS) of the sinusoidal function.
Since the high temperature occurs at 5 pm (17 hours since midnight), the horizontal shift is 17 hours.
Determine the vertical shift (VS) of the sinusoidal function.
The vertical shift is the average temperature, which is 80 degrees.
Write the sinusoidal equation for the temperature, d, in terms of t.
Since the temperature reaches its peak (high temperature) at 5 pm, we will use the cosine function, as it starts at its peak value. The general form of the cosine function is:
d(t) = A * cos[(2π/P) * (t - HS)] + VS
Now, plug in the values found in steps 1-4:
d(t) = 9 * cos[(2π/24) * (t - 17)] + 80
So, the equation for the temperature, d, in terms of t is:
d(t) = 9 * cos[(π/12) * (t - 17)] + 80
Learn more about "temperature": https://brainly.com/question/25677592
#SPJ11
Study Guide:
What are the assumptions (or conditions) required for the Intermediate Value Theorem?
The Intermediate Value Theorem states that for any value c between the function's values at the endpoints (f(a) and f(b)), there exists a value x in the interval [a, b] such that f(x) = c.
The assumptions (or conditions) required for the Intermediate Value Theorem are:
1. The function is continuous: The function must be continuous on the closed interval [a, b]. This means that there are no breaks, jumps, or holes in the graph of the function within the given interval.
2. The interval is closed and bounded: The interval [a, b] must be a closed interval, meaning it includes both endpoints a and b. Additionally, the interval must be bounded, meaning the function has a maximum and a minimum value within the interval.
By satisfying these two assumptions, the Intermediate Value Theorem states that for any value c between the function's values at the endpoints (f(a) and f(b)), there exists a value x in the interval [a, b] such that f(x) = c.
Learn more about function here,
https://brainly.com/question/16634496
#SPJ11
Question 1
A town's population has been exponentially increasing for the past 10 years. The town council initially recorded the town's
population at 6,000 people and tracked it each year after that. The table represents their data.
Years
1
2
3
4
6
7
8
9
Town Population
(in thousands)
6
Part A
6.9
9
10.5
13
14.2
18
20.8
26
31.3
Use the graphing tool to plot the population data and determine the curve of best fit.
Question
What is the equation of the curve of best fit for the population data?
Enter the correct answer in the box by replacing a and b with the values from the graphing tool. Do not round the values
A and b
The equation of best fit is ŷ = 2.69152X + 3.45818.
From the data we cab write,
Sum of X = 45
Sum of Y = 155.7
Mean X = 4.5
Mean Y = 15.57
Sum of squares (SSX) = 82.5
Sum of products (SP) = 222.05
So, Regression Equation = ŷ = bX + a
Now, b = SP/SSX = 222.05/82.5 = 2.69152
and, a = MY - bMX = 15.57 - (2.69*4.5) = 3.45818
Thus, the equation of best fit is ŷ = 2.69152X + 3.45818.
Learn more about Regression line here:
https://brainly.com/question/7656407
#SPJ1
You are building a greenhouse with walls that are 10' wide, 15' long, and 8' high. You want the wall
space to be used to hydroponically grow various types of lettuce. You also want to use the floor space to
start tomato seeds. The extension office recommends for only half of the floor space to be available for
the tomatoes.
Glass panels come in 5' x 4' sheets. You will use glass for all windows and doors as well as the walls. How
many glass panels will you need?
Answer:The answer is $911.68.
Step-by-step explanation:
Answer:
we will need 20 glass panels to cover the walls of the greenhouse with 5' x 4' glass panels.
Step-by-step explanation:
First, let's calculate the total wall area:
2 walls (10' x 8') = 160 sq. ft.
2 walls (15' x 8') = 240 sq. ft.
Total wall area = 400 sq. ft.
Next, let's calculate the total floor area:
15' x 5' = 75 sq. ft. (total floor area)
75 sq. ft. / 2 = 37.5 sq. ft. (floor area for tomatoes)
To cover the walls with glass panels, we need to divide the total wall area by the area of each glass panel:
Glass panel area = 5' x 4' = 20 sq. ft.
400 sq. ft. (total wall area) / 20 sq. ft. (area of each glass panel) = 20 glass panels
Therefore, we will need 20 glass panels to cover the walls of the greenhouse with 5' x 4' glass panels.
Identify each variable as either relevant or not relevant to the research question; further classify the relevant variable(s) as either quantitative or categorical.Group of answer choicesThe research question:Based on a recent study, roughly 80% of college students in the U.S. own a smartphone. Is the proportion of smartphone owners lower at this university?Math[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeVerbal[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeCredits[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeYear[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeExercise[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeSleep[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeVeg[ Choose ] Not relevant to the question Relevant; Categorical Relevant; QuantitativeCell[ Choose ] Not relevant to the question Relevant; Categorical Relevant; Quantitative
Math is not relevant to the research question as it is not directly related to smartphone ownership. Verbal, Credits, Year, Exercise, Sleep, Veg, and Cell are also not relevant to the research question as they do not provide information on smartphone ownership or the proportion of smartphone owners at a specific university. The relevant variable in this research question is smartphone ownership.
The relevant variable in this research question is smartphone ownership. This variable is quantitative as it involves measuring the proportion of smartphone owners at a specific university. The proportion of smartphone owners can be expressed as a percentage or a decimal value, which are both quantitative measurements.
Categorical variables are not relevant to this research question as they do not provide information on the proportion of smartphone owners. Categorical variables involve categorizing data into groups or categories, such as gender or race, which are not directly related to smartphone ownership.
In summary, the only relevant variable in this research question is smartphone ownership, which is a quantitative variable.
To know more about quantitative variable refer here:
https://brainly.com/question/30366950
#SPJ11
Let β and γ be ordered bases of a vector space V. Let T : V → V be a linear transformation. Prove that [T]β and [T]γ, are similar.
The matrices [T]β and [T]γ, which represent a linear transformation T with respect to ordered bases β and γ in vector space V, are similar.
To prove that [T]β and [T]γ are similar, we need to show that there exists an invertible matrix P such that [T]γ = P⁻¹ [T]β P.
Since β and γ are ordered bases of V, there exists an invertible change of basis matrix Q such that γ = βQ.
Then, we can write [T]γ = [T]βQ(Q⁻¹) = P⁻¹[T]β P where P = Q^(-1).
Therefore, [T]β and [T]γ are similar, and the matrix P is the change of basis matrix from β to γ.
To know more about matrix:
https://brainly.com/question/28180105
#SPJ4
The range of probability is _____,
a. any value larger than 0
b. 0 to 1, inclusive
c. any value between -1 to 1
d. any value between minus infinity to plus infinity
Answer: A
Step-by-step explanation:
Mr. Tukey's class is taking a field trip on a bus. While traveling, students count the number of cars with out-of-state license plates. The students' data are given. Use the data to make a cumulative frequency table.
10, 30, 25, 31, 17, 25, 36, 20, 34, 14, 35, 24, 22, 19, 37
Answer:
The graph shown is the answer
Step-by-step explanation:
It says why and how its the answer
Rose works a concession stand at a football game that sells whole pretzels and bottle of water.
Each pretzel sells for $2.50 and each bottle of water sells for $1.00
Rose collected $135 in sales
Rose sold a total of 87 items at the past game
Enter the number of pretzels rose sold at the game
Rose sold 53.6 pretzels.
P x ? + W = 135
2.50 x 53.6 + 1.00 = 135
Vine gunshot sound effect download unblockeRestaurants often slip takeout menus under Eli's apartment door. So far, Eli has collected 28 menus, including 7 for Italian food. Considering this data, how many of the next 24 menus slipped under Eli's door should you expect to be from Italian restaurants?
From percentage formula, in a vine gunshot sound effect download unblocked restaurants, the number of expected Italian restaurants in next 24 menus slipped under Eli's door is six.
We have a Vine gunshot sound effect download unblocked Restaurants often slip takeout menus. Total collected menus by Eli = 28
In this 28 menus, 7 for Italian food. We have to determine the how many menus in next 24 menus slipped under Eli's door expected from Italian restaurants. Percentage is calculated by dividing the value by the total value, and then multiplying the resultant value by 100.
Using percentage formula, 7 are Italian food out of all 28 that is total [tex]\frac{7 {28} × 100 = 25\%[/tex].
Let the required number of menus slipped under Eli's door should you expect to be from Italian restaurants be x. So, number of menus slipped under Eli's door should you expect to be from Italian restaurants out of 24, x = 25% of 24
=> [tex]\frac{25}{100} × 24 = x[/tex]
=> x = 6
Hence, required value is 6.
For more information about percentage, visit:
https://brainly.com/question/843074
#SPJ4
please find M, ill give brainliest if youre correct
Answer: m∠1=76.5
Step-by-step explanation:
x+y/2
71+82/2
153/2
76.5
Hope this helps! :)
A chain saw requires 5 hours of assembly and a wood chipper 2 hours. A maximum of 20 hours of assembly time is
available. The profit is $190 on a chain saw and $210 on a chipper. How many of each should be assembled for
maximum profit?
An assembly time, chain saw requires 5 hours of assembly and a wood chipper 2 hours. From linear programming for maximum profit, number of chain saw assembled are 0 and number of wood chipper are 10.
This problem is related to the topic of linear programming. We use a graphical method to solve the equation. To determine the maximum profit we write the equation of profit. Let we consider x chain saw and y wood chipper. We have a chain saw requires 5 hours of assembly. But wood chipper require 2 hours of assembly. Maximum hours of assembly time available = 20 hours
So, 5x + 2y ≤ 20 --(1) and x ≥ 0, y≥ 0
Profit of chain saw = $190
Profit on wood chipper = $210
Maximize profit, Max Z = 190x + 210y
Now, using graphical method, draw a graph is present in above figure. To determine the profit at point A and B
At point A( 0, 10)
Z = 190 ×(0)+ 210× (10) = 2100 --(1)
At point B(5,0)
Z = 190×(5)+230×(0) = 950 --(2)
Clearly from equation (1), maximum profit is at point A, number of chain saw assembled are 0 and number of wood chipper arre 10.
For more information about linear programming, visit :
https://brainly.com/question/14309521
#SPJ4
A study was conducted to determine the percent of children that want to grow up work in the same career as a parent. In a sample of 200 children, it was calculated that 43% wanted to eventually work in the same career as a parent. Construct the 95% confidence interval for the population proportion. Proposed Solution: phạt = 0.43/200 = 0.00215 phat - qnorm(1.95/2)*sqrt(phat*(1-phat)/200) = -0.00426926 phat + qnorm(1.95/2)*sqrt(phat*(1-phat)/200) = 0.00856926 [-0.0043, 0.0086) What is wrong with the proposed solution? A. phat was already provided, so dividing that value by the sample size is incorrect B. For a 95% confidence level, the z* is calculated by qnorm(0.95). C. You cannot use "phat" in an R Studio command. The decimal must be written D. You cannot have negative values as one of the limits on your interval. This should be made positive. E. The proposed solution is correct.
Previous question
The correct answer is B. For a 95% confidence level, the z* value should be calculated using qnorm(0.975).
The proposed solution to construct a 95% confidence interval for the population proportion has several errors. Let's review each of them in detail:
A. phat was already provided, so dividing that value by the sample size is incorrect:
This is incorrect because phat represents the sample proportion, which is the point estimate of the population proportion. The sample proportion alone is not enough to estimate the variability of the sample proportion, which is required to construct a confidence interval. Therefore, we need to divide phat by the sample size to obtain the standard error of the sample proportion.
B. For a 95% confidence level, the z* is calculated by qnorm(0.95):
This is incorrect because a 95% confidence level corresponds to a 1.96 standard error for a two-tailed test, not a 1.645 standard error. Therefore, we need to use qnorm(0.975) or qnorm(1 - 0.025) to find the z* value.
C. You cannot use "phat" in an R Studio command. The decimal must be written:
This is incorrect because "phat" is a valid R Studio command that represents the sample proportion. However, it is important to define this variable beforehand to avoid any errors.
D. You cannot have negative values as one of the limits on your interval. This should be made positive:
This is correct. A confidence interval cannot have negative values as limits since proportions must be between 0 and 1. Therefore, we need to take the absolute value of the lower limit.
E. The proposed solution is correct:
This is incorrect, as discussed above. The correct solution should use the formula:
phat +/- z* * sqrt(phat*(1-phat)/n)
where phat = 0.43, n = 200, and z* is the critical value of the standard normal distribution corresponding to a 95% confidence level, which is approximately 1.96. Therefore, the correct 95% confidence interval is:
0.43 +/- 1.96 * sqrt(0.43*(1-0.43)/200) = (0.369, 0.491).
To learn more about absolute value visit: https://brainly.com/question/1301718
#SPJ11
What is the average rate of change for this quadratic function for the interval
from x=-4 to x = -2?
A. 6
B. -12
C. -6
OD. 12
The average rate of change of the given function graph between the two given values is: 6
How to find the average rate of change of a function?The Average Rate of Change of a function is one that is defined as the average rate at which one quantity is changing with respect to another thing changing. Thus, an average rate of change function is basically a process that helps to calculate the amount of change in one item divided by the corresponding amount of change in another.
It is given by the formula:
f'(x) = [f(b) - f(a)]/(b - a)
From the graph attached, we have that:
f(-4) = -6
f(-2) = 6
Thus:
f'(x) = (6 - (-6))/(-2 - (-4))
f'(x) = (6 + 6)/(-2 + 4)
f'(x) = 6
Read more about Average Rate of Change at: https://brainly.com/question/8728504
#SPJ1
There are 20 students in a class. Billy is one of them. Suppose we select 5 students in the class uniformly at random without replacement.
a.What is the probability that Billy is among the 5 selected students?
b.Bob is also one of the 20 students. What is the probability that Bob and Billy are chosen among the 5 students?
c.What is the probability that Bob or Billy is chosen among the 5 students?
d.What is the probability that Bob is not chosen and Billy is chosen among the 5 students?
Explain your answer.
In part (d), we had to calculate the probability of choosing 4 out of the 18 remaining students because we know that Bob is not chosen.
The probability that Billy is among the 5 selected students is given by the number of ways Billy can be selected out of 20 students, divided by the total number of ways to select 5 students out of 20:
P(Billy is selected) = 1/ C(20,5) = 1/15504
b. The probability that both Billy and Bob are chosen among the 5 students is given by the number of ways both Billy and Bob can be selected out of 20 students, divided by the total number of ways to select 5 students out of 20:
P(Billy and Bob are selected) = C(2,2) * C(18,3) / C(20,5) = 816/15504 = 0.0526
c. The probability that Bob or Billy is chosen among the 5 students is given by the sum of the probabilities of Billy being chosen and Bob being chosen, minus the probability of both Billy and Bob being chosen (to avoid double-counting):
P(Bob or Billy is selected) = P(Billy is selected) + P(Bob is selected) - P(Billy and Bob are selected)
= 1/ C(20,5) + 1/ C(20,5) - 816/15504
= 2/15504 + 2/15504 - 816/15504
= 168/15504 = 0.0108
d. The probability that Bob is not chosen and Billy is chosen among the 5 students is given by the number of ways to choose 4 students out of the 18 remaining students, multiplied by the number of ways to choose Billy from those 4 students, divided by the total number of ways to choose 5 students out of 20:
P(Bob is not chosen and Billy is chosen) = C(18,4) * C(1,1) / C(20,5) = 3060/15504 = 0.1971
Explanation: In order to calculate the probabilities, we used the formula for the probability of a combination, which is the number of favorable outcomes divided by the total number of possible outcomes. In part (c), we had to subtract the probability of both Billy and Bob being chosen to avoid double-counting. In part (d), we had to calculate the probability of choosing 4 out of the 18 remaining students because we know that Bob is not chosen.
To learn more about probability visit:
https://brainly.com/question/28045837
#SPJ11
Need this answered quick geometry
Answer: Geometry is a branch of mathematics that deals with the study of shapes, sizes, positions, and measurements of objects in two-dimensional and three-dimensional spaces. It involves analyzing and calculating angles, lengths, areas, volumes, and other properties of various figures such as triangles, circles, squares, cubes, and spheres. Geometry is used in many fields including architecture, engineering, physics, and computer graphics.
It is important that face masks used by firefighters be able to withstand high temperatures because firefighters commonly work in temperatures of 200–500°F. In a test of one type of mask, 11 of 55 masks had lenses pop out at 250°. Construct a 90% CI for the true proportion of masks of this type whose lenses would pop out at 250°.
Means that we are 90% confident that the true proportion of masks with lenses that pop out at 250° is between 7.6% and 32.4%.
We can use the formula for a confidence interval for a proportion:
CI = p ± z*sqrt(p(1-p)/n)
where:
p = sample proportion = 11/55 = 0.2
z = the z-score for a 90% confidence level, which is 1.645
n = sample size = 55
Plugging in the values, we get:
CI = 0.2 ± 1.645*sqrt(0.2(1-0.2)/55)
CI = 0.2 ± 0.124
Therefore, the 90% confidence interval for the true proportion of masks of this type whose lenses would pop out at 250° is (0.076, 0.324). This means that we are 90% confident that the true proportion of masks with lenses that pop out at 250° is between 7.6% and 32.4%.
To learn more about formula visit:
https://brainly.com/question/28647690
#SPJ11
Some people claim that psychology is common sense. A psychologist predicts that this is not true and that nonpsychology majors will do worse at predicting the outcomes of psychology experiments than psychology majors. Psychology students typically predict outcomes with 75% accuracy (population mean). A sample of 15 nonpsychology students predicted with 60% accuracy (sample mean). The estimated standard error of the mean = 2.696. What is the 95% confidence interval for nonpsychology students?
the 95% confidence interval for the mean prediction accuracy of nonpsychology students is (0.60 - 1.77, 0.60 + 1.77), which is approximately equal to (−1.17, 2.37).
To calculate the 95% confidence interval for the mean prediction accuracy of nonpsychology students, we can use the following formula:
CI = X ± t(α/2, df) × (SE)
where:
- X is the sample mean (0.60 in this case)
- t(α/2, df) is the t-value for the given level of significance (α), degrees of freedom (df) and two-tailed test. For a 95% confidence interval with df = n - 1 = 14, the t-value is 2.145
- SE is the estimated standard error of the mean (2.696 in this case)
Substituting the given values into the formula, we get:
CI = 0.60 ± 2.145 × (2.696/√15)
Simplifying the expression, we get:
CI = 0.60 ± 1.77
Therefore, the 95% confidence interval for the mean prediction accuracy of nonpsychology students is (0.60 - 1.77, 0.60 + 1.77), which is approximately equal to (−1.17, 2.37).
Note that the confidence interval includes the population mean of 75%, which suggests that the psychologist's prediction is correct - nonpsychology students are likely to do worse than psychology students at predicting the outcomes of psychology experiments. However, the confidence interval is quite wide, indicating that there is considerable uncertainty in our estimate of the mean accuracy for nonpsychology students based on this small sample size.
Visit to know more about % :-
brainly.com/question/843074
#SPJ11
QW: Investing Funds
Name: Cissel Ibana.
Date: W1003
friends.
imagine you're buying a dozen donuts for you and your
Do you buy all 12 in the same flavor? Or would you buy a box that
has a variety of flavors? Why?
the
Explain using 2-3 complete sentences why you feel this way.
Clavi
1. Dan has £6,000 in his bank account. His bank account pays compound interest at
a rate of 4% per year. How much will Dan have after 3 years?
NS
At the end of three years, Daniel would have saved $6749.
What is the compound interest?When interest is calculated on a principal amount of money using the compound interest method, the interest gained is periodically added back to the principal and interest is then calculated on the new principal amount.
We know that;
A = P(1 + r/n)^nt
A =amount
r = rate
P = principal
n = Number of times compounded
t = time
Thus;
A = 6000(1 + 0.04)^3
A = $6749
Thus the compound amount saved is $6749
Learn more about compound interest:https://brainly.com/question/14295570
#SPJ1
Michelle started her retirement plan early by saving $200 per month since she was 20 years old. During that time, she has earned an average annual rate of 5.2% compounded monthly. Her twin brother Michael, now 40 years old, would like to catch-up with his twin sister by contributing a monthly payment for the next 20 years. How much should Michael contribute monthly, assuming that both he and his twin sister will continue to earn an annual rate of 5.2% interest, compounded monthly?
The PMT or monthly contribution is pegged at $764.57
What is a Retirement Plan?
Individuals employ a financial tactic known as a retirement plan to accumulate and invest funds, which will enable them to have access to revenue during their retirement period.
The aim of this approach is to certitude that these individuals possess ample income to maintain their standard of living and fulfil any additional monetary requirements once they terminate employment.
Read more about retirement here:
https://brainly.com/question/28128413
#SPJ1
The table shows the average aduat weight and average life expectancy for 12 dog breeds a. Pint the data as ordered pairs. Describe the shape of the data. Show your work. Average Weight Life Expectancy 125 57. 5 62. 5 49 12 16 12. 3 12 11
The scatter plot shows that there is no strong correlation between average weight and life expectancy for the 12 dog breeds. The coefficient of correlation for this adult weight data to be -0.123, which is very near to 0.
The adult weight of a person can vary greatly depending on several factors, including genetics, age, gender, height, muscle mass, and overall health. However, a healthy weight range for adults is typically determined by body mass index (BMI), which is calculated by dividing weight in kilograms by height in meters squared.
We can use the average weight as the x-value and the average life expectancy as the y-value to represent the data as ordered pairs. Following are the ordered pairs for the provided data:
(125, 57.5)
(62.5, 49)
(12, 16)
(12.3, 12)
(11, 11)
We may plot these ordered pairs on a scatter plot to show the form of the data. As for the story:
We can observe from the scatter plot that there is no obvious pattern formed by the data points. There is no discernible pattern or connection between the two variables, and the spots are dispersed throughout the plot. As a result, the data's shape can be described as random or dispersed.
We can calculate the correlation coefficient to provide more evidence for this. The variables do not have a linear relationship if the correlation coefficient is close to zero. we can calculate the coefficient of correlation for this data to be -0.123, which is very near to 0.
To learn more about adult weight visit:
https://brainly.com/question/395419
#SPJ4
K
Find the area of the shaded region. Leave your answer in
terms of and in simplified radical form.
...
120°
18 cm
The area of the shaded region is
(Simplify your answer. Use integers or fractions for any numbers in the expression.
Type an exact answer in terms of x.)
The area of the sector is 305. 2 cm²
How to determine the areaThe area of the shaded part is equivalent to the area of the sector.
The formula for determining the area of a sector is expressed with the equation;
A = θ/360 × πr²
Given that the parameters of the equation are;
A is the area of the sectorθ is the angle subtendedr is the radiusFrom the diagram shown, we have;
Area = 120/360 × 3.14 × 18²
find the square values
Area = 0. 3 × 3. 14 × 324
multiply the values
Area = 305. 2 cm²
Learn about area at: https://brainly.com/question/25292087
#SPJ1
1 27 3 Q5. Consider the MA(2) process X, = (1+0,B²)W, with W, - WN(0,1). Recall that y(0)=1+02", y(1)=0, Y(2)= 0, , y(h) = 0 for h> 3. i) Use the innovations algorithm to find x), X3, and X in terms of U,,U2, and Uz. (Note that a lot of terms will be zero.) ii) Use the result from part i to find xx. (Note that we have calculated x2 in Q8 of HW#6. But in that question, we expressed it in terms of Xi and X2, but in here we expressed it in terms of U, and U2.)
X1 = U1 + U-1 = U1 (since U-1 = 0);
X2 = U2 + U0 = U2 + 1 (since U0 = y1 - y0 = -1);
X3 = U3 + U1 = U3 + U1;
X4 = U4 + U3 + U2.
Innovations algorithm is a method for computing the values of a time series at each time point using the lag operator and the innovation or error terms. The lag operator, denoted by the symbol B, is used to shift the time index of a time series by one unit. Specifically, B multiplied by the time series X is equivalent to the time series X shifted one unit into the past.
We are given the MA(2) process X, = (1+0,B²)W with W, - WN(0,1), this means that X is a moving average process of order 2, where the current value of X depends on the current and two past innovation terms. The innovation terms U1, U2, U3, ... are uncorrelated random variables with zero mean and unit variance.
i) To use the innovations algorithm to find X1, X2, and X3 in terms of U1, U2, and U3, we first need to express X in terms of B and the innovation terms. Using the definition of the MA(2) process, we have:
Xt = (1 + 0*B^2)Wt + B* (1 + 0*B^2)Wt-1 + B^2* (1 + 0*B^2)Wt-2
= (1 + 0*B^2)Wt + B* (1 + 0*B^2)Wt-1 + B^2* (1 + 0*B^2)Wt-2
= Wt + B*Wt-1 + B^2*Wt-2
Next, we can use the innovations algorithm to express Xt in terms of the innovation terms U1, U2, and U3. The algorithm works as follows:
- Compute the initial values of the time series using the given initial conditions. In this case, we have y(0)=1+0*2, y(1)=0, y(2)=0, and y(h)=0 for h>3.
- For each time point t > 2, compute the innovation term Ut as the difference between the observed value yt and the predicted value based on the past observations up to time t-1. Specifically, we have:
Ut = yt - (1 + 0*B + 0*B^2) yt-1
= yt - yt-1
- Compute the current value of Xt as a linear combination of the past innovation terms Ut-1, Ut-2, and Ut-3, using the coefficients from the MA(2) process. Specifically, we have:
Xt = Ut + 0*Ut-1 + Ut-2
= Ut + Ut-2
Using this algorithm, we can compute the values of X1, X2, and X3 as follows:
- X1 = U1 + U-1 = U1 (since U-1 = 0)
- X2 = U2 + U0 = U2 + 1 (since U0 = y1 - y0 = -1)
- X3 = U3 + U1 = U3 + U1
ii) To find the value of X4, we can use the result from part i to express X4 in terms of the innovation terms U1, U2, U3, and U4. Specifically, we have:
X4 = U4 + U2
= y4 - y3 + y2 - y1
= (1 + 0*B^2) W4 - (1 + 0*B + 0*B^2) W3 + (1 + 0*B^2) W2 - (1 + 0*B + 0*B^2) W1
- (1 + 0*B + 0*B^2) W0
= W4 - W3 + W2 - W1
= U4 + U3 + U2
Therefore, X4 = U4 + U3 + U2.
To know more about Lag operator visit:
https://brainly.com/question/30888331
#SPJ11
Write the coordinates of the vertices after a reflection over the y-axis.
To reflect a figure over the y-axis, we simply change the sign of its x-coordinates while keeping the y-coordinates the same. So, the coordinates of the vertices after a reflection over the y-axis would be:
A'(-2, 1), B'(-1, 3), C'(1, 2), D'(2, 0)
When we reflect a figure over the y-axis, we are essentially flipping the figure horizontally along a vertical line passing through the origin.
This means that every point on the original figure is reflected across this vertical line, resulting in a new figure that is a mirror image of the original.
Thus, the coordinates of the vertices after a reflection over the y-axis are A'(-2, 1), B'(-1, 3), C'(1, 2), and D'(2, 0).
For more details regarding coordinates, visit:
https://brainly.com/question/16634867
#SPJ1
which of the following will shift the production possibilities curve outward?i. an increase in the production of investment goodsii. an increase in the production of consumer goodsiii. technological progress
Answer:
If not choose all that apply, technological process will shift the PPC right (outwards)
Step-by-step explanation:
The production possibilities curve represents the maximum amount of goods and services that a country can produce with its limited resources. It is a graphical representation of the trade-offs a country must make between producing one good or service over another. Any factor that can increase production will shift the curve outward, indicating an increase in the maximum amount of goods and services that can be produced.
An increase in the production of investment goods will shift the curve outward because it will increase the amount of capital goods that can be used to produce other goods and services. Investment goods are items like machinery, equipment, and infrastructure that are used to produce other goods and services. By increasing the production of investment goods, a country can increase its productive capacity, allowing it to produce more goods and services in the future.
An increase in the production of consumer goods will not shift the curve outward because it does not increase the country's productive capacity. Consumer goods are items that are consumed immediately, like food, clothing, and electronics. While an increase in the production of consumer goods can lead to short-term economic growth, it will not increase the country's long-term productive capacity.
Technological progress, on the other hand, will shift the production possibilities curve outward. Technological progress refers to advancements in technology that increase productivity, reduce costs, and improve efficiency. By adopting new technologies, a country can produce more goods and services with its existing resources, allowing it to shift its production possibilities curve outward.
In conclusion, an increase in the production of investment goods and technological progress will shift the production possibilities curve outward, while an increase in the production of consumer goods will not.
More question on increase : https://brainly.com/question/11360390
#SPJ11
Identifying,simplifying, setting up, and solving proportions 1-4
1. Circling non-ratio.
c. 6d. 12.52. Circling ratios that are fully simplified.
a. 7/3b. 1/2c. 2/13d. 3/1e. 21/5f. 44/1g. 1/8h. 10/3i. 2/6 or 1/3Variables in a proportion:
3. a. x = 43. b. y = 154. a. x = 34. b. y = 2How to find variable in each proportion?3. Solve for the variable in each proportion.
a. 3/9 = x/12
To solve for x, cross-multiply and simplify:
3/9 = x/12
(3)(12) = (9)(x)
36 = 9x
x = 4
Therefore, the solution is x = 4.
b. 20/y = 4/3
To solve for y, cross-multiply and simplify:
20/y = 4/3
(4)(y) = (20)(3)
4y = 60
y = 15
Therefore, the solution is y = 15.
4. Solve for the variable in each proportion.
a. 2/14 = (x+1)/28
To solve for x, cross-multiply and simplify:
2/14 = (x+1)/28
(2)(28) = (14)(x+1)
56 = 14x + 14
42 = 14x
x = 3
Therefore, the solution is x = 3.
b. 3/(2y-3) = 6/y
To solve for y, cross-multiply and simplify:
3/(2y-3) = 6/y
(3)(y) = (6)(2y-3)
3y = 12y - 18
-9y = -18
y = 2
Therefore, the solution is y = 2.
Find out more on solving proportions here: https://brainly.com/question/31020414
#SPJ1
Find the probability that a randomly
selected point within the circle falls in the
red-shaded triangle.
16
LO
5
12
15
P = [?]
Enter as a decimal rounded to the nearest hundredth.
The probability that a randomly selected point within the circle falls in the
red-shaded triangle is 0.14.
What is probability?It is the chance of an event to occur from a total number of outcomes.
The formula for probability is given as:
Probability = Number of required events / Total number of outcomes.
Example:
The probability of getting a head in tossing a coin.
P(H) = 1/2
We have,
Area of the circle.
= πr²
= 3.14 x 15 x 15
= 706.5
Area of the shaded triangle.
= 1/2 x base x height
= 1/2 x 12 x 16
= 6 x 16
= 96
Now,
The probability that a randomly selected point within the circle falls in the
red-shaded triangle.
= Area of shaded triangle /Area of the circle
= 96/706.5
= 0.14
Thus,
The probability that a randomly selected point within the circle falls in the
red-shaded triangle is 0.14.
Learn more about probability here:
https://brainly.com/question/14099682
#SPJ5