strategies for controlling carbon monoxide are in conflict with strategies for controlling oxides of nitrogen .

It's important to know that gases don't have a defined volume as solids do because they don't have a definite shape.

Also, gas partcles are not tied together because their intermolecular forces are weak, this enables them to travel away one from another.

Therefore, the answer is A.

The pH of the solution is calculated as 7.2.

Let us recall that we can make us of the Henderson–Hasselbalch equation

to obtain the pH of the solution if we would follow the steps that have been itemized below.

Number of moles of the acid = 500/1000 L * 0.20 M = 0.1 moles

Number of moles of salt =  500/1000 L * 0.1 M = 0.05 moles

Total volume of the solution = 500 mL + 500 mL = 1000 mL or 1L

Now;

Molarity of the acid = 0.1 moles/1 L = 0.1 mol L-1

Molarity of the salt = 0.05 moles/1 L = 0.05 molL-1

Then we apply the equation;

pH = pKa + log[(A-)/(HA)]

pKa = - log (Ka) = - log(3.2 × 10^–8) = 7.5

Thus we have;

pH = 7.5 + log (0.05/0.1)

pH = 7.5 - 0.3

pH = 7.2

Learn more about pH:https://brainly.com/question/15289741

#SPJ1

Answer:

It was started by the FBI

To determine what type of bond is formed when hydrogen and oxygen form water, we have to find the difference in electronegativities of hydrogen and oxygen:

According to this, the difference between electronegativities is less than 1.7 and greater than 0.4, which means that the type of bond formed by oxygen and hydrogen is polar covalent bond.

The number of grams of calcium fluoride in 1.5 moles of calcium fluoride is 88.5grams.

The mass of a substance or compound can be calculated by multiplying the number of moles of the substance by its molar mass as follows:

mass = no of moles × molar mass

According to this question, there are 1.5 moles of calcium fluoride (CaF). The molar mass of calcium fluoride can be calculated as follows:

CaF = 40g/mol + 19g/mol = 59g/mol

mass = 59g/mol × 1.5mol

mass = 88.5grams.

Therefore, 88.5grams of calcium fluoride is present in 1.5 moles of the compound.

Learn more about mass at: https://brainly.com/question/12310796

#SPJ1

Except for NACLE, the is made up of ionic compounds. Carbon disulfide bonds are not ionic due to their weak and trivial polarity. Carbon disulfide bonds are covalent due to the small difference in electronegativities of carbon and sulfur.

To learn more about Ionic Bond, refer to:

https://brainly.com/question/977324

#SPJ13

Initial Pressure = P₁ = 0.930 atm

Final Pressure = P₂ = ?

Initial Volume = V₁= 96.2 mL

Final Volume = V₂ = 44.7 mL

Temperature = constant

If we consider that ammonia as an Ideal Gas, and since the temperature is constant we can apply Boyle's Law. It says that at constant temperature:

P₁ * V₁ = P₂ * V₂

If we divide at both sides by V₂:

P₁* V₁ / V₂ = P₂ * V₂ / V₂

On the right side we can cancel V₂ and we get:

P₁* V₁ / V₂ = P₂

P₂ = P₁* V₁ / V₂

Replacing by the values that we were given:

P2 = 0.930 atm * 96.2 mL / (44.7 mL)

P2 = 2.00 atm

So the final pressure is 2.00 atm

The energy and frequency of the red light would be  2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively if the red light has a wavelength of 650

nm.

It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.

C = λν

As given in the problem we have to calculate the energy of the light if the wavelength of light is 6.5 × 10⁻⁷ meters.

The frequency of the red  light = 3 × 10⁸ / 6.5 × 10⁻⁷

                                                    = 4.615 × 10¹⁴ Hz

The energy of the red light = h ν

                                             = 6.26 × 10⁻³⁴ × 4.615 × 10¹⁴

                                             = 2.88 × 10⁻¹⁹ Joules

Thus, the energy and frequency of the red light would be  2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively.

To learn more about wavelength, refer to the link given below ;

brainly.com/question/7143261

#SPJ1

Answer

Temperature of the room

Explanation

The room temperature can be controlled compared to all other options.

The balanced chemical equation between magnesium and hydrochloric acid  is Mg + 2 HCl[tex]\rightarrow[/tex] MgCl₂ + H₂

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

Metals reacts with hydrogen halides to produce metallic halides easily and the reaction evolves hydrogen gas. The balanced reaction of Mg and HCl is written as follows:

[tex]Mg (s) + 2HCl \rightarrow MgCl_{2} (aq)+ H_{2}(g)[/tex]

A balanced reaction is represented by a chemical equation, in which each elements are equal in number on both side of the reaction. Thus the coefficients of reactants must be in proper stoichiometric ratios.

Metals easily reacts with hydrogen halides such as HCl, HBr, HF etc to form their metal halides. This reaction evolves hydrogen gas. Metals are highly electropositive and they can donate electrons to the electronegative atoms such as Cl.

In the given reaction, there are 2 hydrogens and two chlorines in the product side. Thus We have to multiply HCl by 2. Thus, there will be equal number of hydrogens in both side and similar for Mg and chlorines.

Therefore, the balanced reaction is :[tex]Mg (s) + 2HCl \rightarrow MgCl_{2} (aq)+ H_{2}(g)[/tex]. and the whole number coefficients are 1,2,1,1.

To find more about balanced reactions, refer the link below:

https://brainly.com/question/22064431

#SPJ1

The molar mass of oxygen gas (O2) is 32.00 g/mol.

The molar mass of C3H8 is 44.1 g/mol.

This kind of reaction is a combustion:

C3H8 + 5O2 → 3CO2 + 4H2O (In a combustion we obtain CO2 and H2O. Don't forget to balance this equation)

Procedure:

Let's use stoichiometry to solve this

44.1 g C3H8 --------- 5 x 32.00 g O2

0.025 g C3H8 --------- X

X = 0.091 g O2

Answer: mass of O2 required = 0.091 g

The volume of the base, LiOH required to reach the halfway point will be 170.6 mL.

The balanced chemical equation for this reaction will be:

HCOOH +LiOH → HCOOHLi + [tex]H_{2}O[/tex]

It can be observed that,

The mole ratio of HCOOH ([tex]n_{a}[/tex], acid) = 1

The mole ratio of LiOH ([tex]n_{b}[/tex], base) = 1

Volume of acid, HCOOH ([tex]V_{a}[/tex] = 64.0 mL

Molarity of acid, HCOOH ([tex]M_{a}[/tex]) = 0.4 M

Molarity of base, LiOH ([tex]M_{b}[/tex]) = 0.150 M

The volume of a base can be determined by the formula:

Ma×Va / Mb ×Vb = nA / nB.....(i)

Now, put the given data in above formula:

(0.4 × 64) / (0.150 × [tex]V_{b}[/tex]) = 1

25.6 / (0.150 × [tex]V_{b}[/tex]) = 1

By solving it:

0.150 × [tex]V_{b}[/tex] = 25.6

[tex]V_{b}[/tex] = 25.6 / 0.150

[tex]V_{b}[/tex] = 170.6 mL

Therefore, the volume of the LiOH required to reach the halfway point will be 170.6 mL.

To know more about halfway point

https://brainly.com/question/17329525

#SPJ1

The difference between ionization and dissociation : Ionization breaks ionic bonds, and dissociation breaks covalent bonds.

Ionization breaks the ionic bond into its constituent ions while dissociation is breaking of bond into its simple constituent. Ionization is a irreversible process and dissociation is reversible process. The bond involves in the process of ionization is ionic bond and the bond involved in the process of dissociation is the covalent bond. The compound related to ionization is ionic compound and the compounds related with dissociation is covalent compound.

Thus, The difference between ionization and dissociation :

(A) Ionization breaks ionic bonds, and dissociation breaks covalent bonds.

To learn more about ionization and dissociation here

https://brainly.com/question/11705378

#SPJ1

Because tri means 3, there are 3 silicon atoms, and tetra means 4, so there will be 4 nitrogen atoms, the answer is:

4.95 is the number of molecules in 500m cube of Oxygen at room temperature and pressure

we have got data

pressure=1atm

temperature=298 k

volume=500 m^3

gas constant, R=8.31

now, by applying ideal gas equation

PV=nRT

1×500=n×8.31×298

n=2476.38/500

n=4.95

It is the lowest part of the material and has chemical elemental properties. Atoms do not independently exist; rather, they combine to form ions and molecules, which then combine to form the material that we can see, feel, and touch.

Molecules are made up of one or more atoms connected by covalent (chemical) connections. Atoms can be visualized as circles with a nucleus in the center (made up of protons and neutrons) and one or more concentric circles around it that indicate the "shells" or "levels" in which the electrons surrounding the atom's nucleus are located, as well as markings that identify the electron. each level

To know more about  molecules visit : https://brainly.com/question/11405437

#SPJ9

The strength is a measure of the degree of ionization of a substance in an aqueous solution.

Some substances are strong and they dissociate completely (this is the case of hydrochloric acid, HCl, in water), some are weak and they do not dissociate completely (like acetic acid, CH3COOH).

The concentration is a measure of the amount of the substance in a solution and it is usually explessed in moles or percentage. It is a ratio of the substance to the solvent. A concentrated solution is a solution with a high percentage of the substance (solute) in the solution, and a dilute one is a solution with a low percentage of solute.

ANSWER

EXPLANATION

Krypton is an example of a noble gas. Noble gases are not reactive because their octet state has been completely filled. Krypton belongs to group 0 or 18.

Since the octet state is completely filled, then the number of electrons at the outermost shell is 8

Therefore, the valence electrons of Krypton is 8

The electronic configuration of the valence electron is written below as

The final temperature if the final pressure is 0.65 atm will be 585 K

It is given that

Initial Volume of sample = V1 = 6.5 L

Initial temperature = T1 = 298 K

Initial pressure = P1 = 0.51 atm

Final Volume = V2 = 9.9 L

Final temperature = T2 = ?

Final pressure = P2 = 0.65 atm

Gay-Lussac's law - The pressure of a gas is directly proportional to the. temperature when volume and amount of substance is constant. P1/T1 = P2/T2 Combined gas law P1V1/T1 = P2V2/T2 Use the gas laws for pressure, volume and temperature calculations.

P1V1/T1 = P2V2/T2

0.52 x 6.5/298 = 0.65 x 9.9/T2

0.011 = 6.435/T2

T2 = 585 K

Hence, final temperature if the final pressure is 0.65 atm will be 585 K

Learn more about Temperature here:

https://brainly.com/question/25677592

#SPJ13

Answer: valeraldehyde

Explanation:

I had to memorize this one

The functional group present is aldehyde and name of compound is valeraldehyde.

Functional group is defined as a substituent or group of toms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.

The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.

Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.

Learn more about functional groups,here:

https://brainly.com/question/14618322

#SPJ2

Answer:

The correct expression used for solubility is a. grams per 100 grams of solvent. One of the most commonly used methods for expressing the concentrations is molarity.

Answer:

limonene molecule.

Explanation:

Answer:

Iron 24.03%

Carbon 30.90%

Hydrogen 3.86%

Oxygen 41.20 %

Explanation:

Here, we want to get the percentage composition of the given compound

What this means is that we want to get the percentage composition of each of the elements present in the compound

Firstly, we calculate the molar mass of the given compound

We can calculate the molar mass by adding the atomic masses of the elements and their multiplicities

Mathematically, we have that as:

Now, let us get the percentage compositions

For Iron, we have:

For Carbon, we have:

For Hydrogen, we have:

For Oxygen, we have:

Answer:

2. Pressure

4. Number of particles.

Explanation:

If we drop a boiled egg into a container with a smaller mouth than the egg, we can note a change in the pressure inside the container, because initially, we have the atmospheric pressure inside the container but the egg will impose a different pressure inside; and the number of particles will be affected too because we suppose that the container is exchanging particles with the ambient so we wouldn't have an exact amount of particles in the container because of this exchange dynamic, so if the egg is covering the mouth of the container, the number of particles would be constant.

The answers would be 2. Pressure and 4. Number of particles.

Ions can travel directly from the cytoplasm of one animal cell to the cytoplasm of an adjacent cell through  gap junctions.

Cytoplasm is the gelatinous liquid that fills the inside of a cell.

The cytoplasm is composed of water, salts, and various organic molecules. Some intracellular organelles, such the nucleus and mitochondria, are enclosed by membranes that separate them from the cytoplasm.

The cytoplasm has the following functions :

Learn more about the cytoplasm at: https://brainly.com/question/174023

#SPJ1

Firstly we will determine the average or the mean of the objects density:

Now we will calculate the deviation. The deviation is how much is trial is different from the average. We take the absolute value so the answers can be positive:

We will determine the average of the deviation:

To determine the percent deviation we:

Answer: The percent deviation from the mean is 3.24%,

Answer:

m = 506 grams of fluorine

Explanation:

Given:

M = 19·10⁻³ kg / mol - molar mass of fluorine

V = 543.2 mL = 543.2·10⁻³ m³

p = 123456 Pa

t = 29.8°C

_____________________

m - ?

Temperature in degrees Kelvin:

T = 273.15 + t = 273.15 + 29.8 =  302.95 K

Clapeyron-Mendeleev law:

p·V = (m/M)·R·T

Mass of fluorine:

m = p·V·M / (R·T)

m = 123456·543.2·10⁻³·19·10⁻³ / (8,31·302.95) ≈ 0.506 kg  

or m = 506 g

During the electrolysis of the molten lithium chloride, the Lithium ions (Li⁺) at the cathode undergoes reduction, and the electron configuration of lithium becomes 1s²2s¹.

Electrolysis can be described as the process in which the electric current is passed through the chemical compound to break them.  In this process, the atoms and ions are interchanged by the addition or removal of electrons.

The ions are allowed to move freely in this process. When an ionic compound is melted or dissolved in water then ions are produced which can move freely.

During the electrolysis of molten lithium chloride, the lithium ions reach the cathode and accept the electrons while chloride ions reach at anode and loss electrons to become chlorine gas.

At anode :  2 Cl⁻ →    Cl₂ + 2e⁻

At cathode:   2 Li⁺   +   2e⁻  →  Li

Learn more about electrolysis, here:

https://brainly.com/question/12054569

#SPJ1

The first step to find the mass of the 8 moles of NH₃ is to find the molar mass of NH₃. The molar mass of any compound is the mass of one mol of it. To calculate it, we have to look for the atomic masses of the elements that the molecule has.

N: 14.01 amu

H: 1.01 amu

Then the molar mass of NH₃ will be:

molar mass of NH₃ = 14.01 + 3 * 1.01

molar mass of NH₃ = 17.04 g/mol

Now that we know the molar mass of NH₃ (the mass of one mol of it) we can easily find the mass of 8 moles.

mass = 8 moles of NH₃ * 17.04 g/mol = 136.32 g

mass = 136.32 g

Answer: the mass in grams of 8 moles of ammonia is 136.32 g

The statement the chemical makeup of the universe has changed dramatically provides evidence that supports the Big Bang Theory (Option D).

The Big Bang Theory is a widely accepted theory in physics that states all the universe began with a huge explosion and form then matters expanded in space at the same time that it is cooling.

Therefore, with this data, we can see that the Big Bang Theory states that the chemical composition of the universe associated with hydrogen and helium modified since this explosion.

Learn more about the Big Bang Theory here:

https://brainly.com/question/1973038

#SPJ1

Answer:

d

Explanation:

To count atoms, we can find the total sum of the subscripts in a chemical compound.

This is the case for most compounds. In some cases, we will have to multiply subscripts when there are elements inside brackets.

We're given:

Li₂SO₂

In front of lithium (Li), there is a 2.

In front of sulfur (S), there is nothing, which means 1.

In front of oxygen (O), there is a 2.

Add:

2 + 1 + 2 = 5

Therefore, there are 5 atoms in Li₂SO₂.

5 atoms