Stack memory is implemented as a stack data structure. Provide the sequence of push and pop operations on stack memory when the collatz method (provided below) is called with n = 5. Note that an enqueue and dequeue is associated with a method call. For example, the first and last operations in the sequence should be push(collatz(4)) and pop(collatz(4)) respectively. public void collatz(int n) { if (n == 1) return; else if (n % 2 == 0) collatz(n / 2); else collatz(3*n + 1); }

Answer:

The answer is "7.73 kip-ft".

Explanation:

Using this equation, calculate the polar moment of shaft inertia:

[tex]J= \frac{\pi }{32} d^4\\\\[/tex]

  [tex]= \frac{\pi}{ 32} \times 6^4\\\\= 127.234 \ \ in^4[/tex]

Equate the number of moments in x:

[tex]\sum M_x =0[/tex]

[tex]\to T_A-T_B +T_C+T_D =0\\\\\to T_A-40 +20+T_D =0[/tex]

Calculate the torsional response at A using the superposition method:

[tex]\to \phi_A =(\phi_A)_{T} - (\phi_A)_{T_A}\\\\[/tex]

         [tex]= \frac{T_B L_{BC}}{JG}+ \frac{T_C L_{CD}}{JG} - \frac{T_A L_{AD}}{JG}\\\\[/tex]

[tex]0.05= \frac{40 \times 12 \times 2 \times 12}{127.234 \times 11 \times 10^3}+ \frac{20 \times 12 \times 1.5 \times 12 }{127.234 \times 11 \times 10^3} - \frac{T_A \times 12 \times 5 \times 12}{127.234 \times 11 \times 10^3}[/tex]

[tex]0.05= (8.22 \times 10^{-3})+ (3.086 \times 10^{-3})- (5.14 \times 10^{-4} \ T_A)\\\\[/tex]

[tex]\to T_A =12.27 kip \ ft \\\\[/tex]

The torsional answer in help A is  12.27 kip- ft.  It replace the necessary equation values:

[tex]\to T_A-40 +20+T_D =0 \\\\\to 12.27-40+20+T_D=0\\\\T_D=7.73 kip \ ft[/tex]

The torsional reactions at the given supports are;

T_a = 12.3 Kip.ft and T_d = 7.7 Kip.ft

From the image of the shaft attached, if we take a free body diagram and torsion about x, we will have;

∑Mₓ = 0;

T_a + T_d + 20 - 40 = 0     -----(1)

Using the method of superposition, we have;

Φ_a = (Φ_a)_T - (Φ_a)_T_a

Formula for rotation Φ is;

Φ = TL/(JG)

Thus;

0.005 = [tex][\frac{40 * 12 * 2 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}} + \frac{20 * 12 * 1.5 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}}] - \frac{T_{A} * 12 * 5 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}}[/tex]

Solving for T_a in this gives;

T_a = 12.3 Kip.ft

Thus, from eq 1;

12.3 + T_d + 20 - 40 = 0

T_d = 20 - 12.3

T_d = 7.7 Kip.ft

Read more about Torsional reactions from torque at; https://brainly.com/question/20691242

Answer:

In 2019, the average term length was 69 months for new cars and 65 months for used vehicles. Most car loans are available in 12 month increments, lasting between two and eight years. The most common loan terms are 24, 36, 48, 60, 72, and 84 months, according to Autotrader

Explanation:

Answer:

1. They needed to develop multiple components in software programs.

2. The ability to overlap the development to be more evolutionary in nature.

3. The need to be more risk-averse or the unwillingness to take risks led to the use of a spiral model.

Explanation:

Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.

In SDLC, a waterfall model can be defined as a process which involves sequentially breaking the software development into linear phases. Thus, the development phase takes a downward flow like a waterfall and as such each phase must be completed before starting another without any overlap in the process.

An incremental model refers to the process in which the requirements or criteria of the software development is divided into many standalone modules until the program is completed.

Also, a spiral model can be defined as an evolutionary SDLC that is risk-driven in nature and typically comprises of both an iterative and a waterfall model. Spiral model of SDLC consist of these phases; planning, risk analysis, engineering and evaluation.

What motivated software engineers to move from the waterfall model to the incremental or spiral model is actually due to the following fact;

1. When the interviewer asked if you have any questions at the end of the interview don't say no. You should always say yes your interviewer is expecting you to ask a few good questions before ending the interview.

2. Always thank the interviewer for their time and effort to interview you. This would look very good for you and its a nice way to help wrap up the interview.

Answer:

Yes, this is completely independent.

Explanation:

Yes, this is completely independent. Even though there are no South American individuals that are majoring in biomedical engineering in this party it is still a completely independent factor. The origin of birth of an individual does not tie them to a specific degree or field of expertise, therefore a South American individual can study anything they want including mechanical engineering, electrical engineering, or biomedical engineering.

Answer:

B. Precisely define the problem that is to be solved.

Explanation:

Engineering can be defined as the scientific and technological principles that is used for the design, development, operation and control of tools, machines or equipments, structures and systems. These machines, tools, systems and structures are typically designed and developed for the purpose of solving peculiar problems relating to human life. Simply stated, engineering is focused on proffering solutions to real life problems through a design process.

Generally, the design process comprises of series of steps used for the development of various tools, machines, structures and systems. In a chronological order, the basic steps of a design process are;

1. Define the problem: to proffer a solution to any problem, you have to precisely define the problem that is to be solved. Therefore, this is the first step of the design process.

2. Conduct a research: the engineer should collect or gather data (informations) relating to the project.

3. Brainstorming and analysis of data: this is the stage where the engineer conceptualize his or her ideas.

4. Create a prototype or simulated model of the product.

5. Product analytics and test: this is where the product is being used and tested for any flaw, error or defects. Thus, troubleshooting is also required at this stage.

Hence, if an engineer is trying to build a new measurement tool; the first step the engineer should complete is to precisely define the problem that is to be solved so as to have a good clear-cut understanding of the problem.

Answer:

Explanation:

One number is wrong; they all lack units.

The basic ratio is 1" = 20', so you can divide feet by 20 to find inches.

Perhaps you want decimal inches:

Answer:

some part of your question is incomplete

attached below is the complete question

Answer :

F(0) = -5  < 0

F(1) = e - 1 > 0

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

Explanation:

using Intermediate value Theorem

If F(x) is continuous and f(a) and f(b) have opposite signs then there will be a'c'E (a,b)  whereby F(c) = 0

given equation : [tex]e^x = 6 - 5x[/tex]   on (0,1)

and F(x) = [tex]e^x - 6 + 5x = 0[/tex]

This shows that the F(x) is continuous on (0,1)

F(0) = [tex]e^0 - 6 + 5(0)[/tex]  = -5 which is < 0

F(1) = [tex]e^1 -6 + 5(1)[/tex] = e -1 > 0  and e = 2.7182

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

This question is incomplete, the complete question is;

Determine the greatest pressure drop allowed over the 10-m-long pipe caused by viscous friction, so the flow remains laminar.

The 125-mm-diameter smooth pipe is transporting SAE 10W-30 oil with ρ=920 kg/m3 and µ=0.2 N.s/m2 .

Answer: the greatest pressure drop allowed is 14247 Pascals

Explanation:

LAMINAR FLOW INF PIPE

greatest pressure drop

(P1 - P2) = pressure drop

(P1 - P2) = 32uvl / D²

so (P1 - P2) ∝ V

greatest pressure drop is only at very high velocity

now Re (Reynold Number = svd / u

Re ∝ V

so velocity is high when Re is high

Re = 2000 ( Highest for LAMINAR)

Re = 2000 = svd / u

now in the question we were given that

s = 920 kg/m³, u = 0.2 NS/m², d = 125mm = 0.125m, l = 10m

so we substitute;

2000 = (920 × v × 0.125) / 0.2

v = 3.48 m/s

now pressure drop = (P1 - P2) = 32UVL / d²

we substitute

(P1 - P2)  = (32(0.2) (3.48)(10)) / (0.125)²

(P1 - P2) = 14247 Pascals

therefore the greatest pressure drop allowed is 14247 Pascals

Explanation:

10000=5000(1.12^x)

2=1.12^x

(log_1.12)(2)=x

x= about 6.1163

10000=5000(1.2^x)

2=1.2^x

(log_1.2)(2)=x

x= about 3.8019

compare them by saying like 20% will be 6.12/3.8 times faster

Answer:

Both Technicians A and B  are correct

Explanation:

If the fluid pressure will decrease quickly in a car when the ignition says that one or more has been switched off. One or two could be leaking or the source could be a faulty check mechanism in the catalytic converter.

The final specific internal energy : 190 kJ/kg

The laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created  

The equation is:  

[tex]\tt E_{in}-E_{out}=\Delta E~system\\\\\Delta E=\Delta U+\Delta KE+\Delta PE\\\\\Delta U=m(U_2-U_1)\\\\Q-W=\Delta U+\Delta KE+\Delta PE[/tex]  

Energy owned by the system is expressed as internal energy (U)  

This internal energy can change if it absorbs heat Q (U> 0), or releases heat (U <0). Or the internal energy can change if the system does work or accepts work (W)  

The sign rules for heat and work are set as follows:  

• The system receives heat, Q +  

• The system releases heat, Q -  

• The system does work, W -  

• the system accepts work, W +  

A closed system of mass 20 kg⇒m=20 kg

Heat transfer of 1000 kJ from the system to the surroundings⇒Q=-1000 kJ

The work done on the system is 200 kJ⇒W=+200 kJ

The initial specific internal energy of the system is 250 kJ /kg⇒U₁ = 250 kj/kg

Neglect changes in kinetic and potential energy⇒ΔKE+ΔPE=0, so

Q-W = ΔU

Input in equation

[tex]\tt -1000-200=20(U_2-250)\\\\-1200=20U_2-5000\\\\3800=20U_2\\\\U_2=190~kJ/kg[/tex]

Answer:

it should be accuracy

Explanation:

Answer:

option C

Explanation:

Answer:

Hello your question is incomplete attached below is the missing part and answer

options :

Effect A

Effect B

Effect C

Effect D

Effect AB

Effect AC

Effect AD

Effect BC

Effect BD

Effect CD

Answer :

A  = significant

 B  = significant

C  = Non-significant

D  = Non-significant

AB  = Non-significant

AC  = significant

AD  = Non-significant

BC  = Non-significant

 BD  = Non-significant

 CD = Non-significant

Explanation:

The dependent variable here is Time

Effect of A  = significant

Effect of B  = significant

Effect of C  = Non-significant

Effect of D  = Non-significant

Effect of AB  = Non-significant

Effect of AC  = significant

Effect of AD  = Non-significant

Effect of BC  = Non-significant

Effect of BD  = Non-significant

Effect of CD = Non-significant