Some help me with this pls

The pressure applied by the man to the ground is 551812.5 Pa or 5.06 psi.

Force applied per unit area is what is referred to as pressure. It can be calculated mathematically using P=FA, where F is the force acting perpendicular to surface area A. The pascal (Pa), or one newton per square metre (N/m 2), is the common unit of pressure.

The following formula can be used to determine how much pressure the man is exerting on the ground:

Pressure = Force / Area

where Area is the portion of the stilts that are in touch with the ground and Force is the man's weight.

Weight equals mass multiplied by gravitational acceleration yields the man's weight.

Weight = 90 kg * 9.81 m/s²

Weight = 882.9 N

The area of each stilt is:

Area = length * width

Area = 0.04 m * 0.04 m

Area = 0.0016 m²

As a result, the man is exerting the following pressure on the ground:

Pressure = Force / Area

Pressure = 882.9 N / 0.0016 m²

Pressure = 551812.5 Pa

To know more about pressure visit:-

https://brainly.com/question/13046888

#SPJ1

The left-right reversal of an object is called as : (a) lateral inversion

Apparent reversal of mirror image's left and right when it is compared with the object is called as lateral inversion. Lateral means sideways. In plane mirror, each point on image is as far behind the mirror plane as the corresponding point on object is in front.

The phenomenon where left appears as the right and vice versa in a mirror is known as lateral Inversion.

Lateral inversion is the side ways reversal of image's left and right when compared to that of the object and lateral inversion is observed in images formed by plane mirror.

To know more about lateral inversion, refer

https://brainly.com/question/12316333

#SPJ1

The trajectory of the shuttlecock before it was smashed by the player and right after it went down on the other side of the net is shown in the attachment.

The trajectory of a projectile is the path that an object takes through the air when it is thrown, and launched into the air.

The trajectory of a projectile is affected by several factors including the initial velocity of the object, the angle at which it was launched, the air resistance, and the gravitational pull of the earth.

In the absence of air resistance, the trajectory of a projectile would follow a parabolic path. However, in the presence of air resistance, the trajectory of the projectile will be affected by the forces of air resistance, and the path will deviate from a perfect parabolic shape.

Learn more about the trajectory of a projectile at: https://brainly.com/question/20794482

#SPJ1

Answer:

Energy = Potential Energy + Kinetic Energy

E = M g h + 1/2 M v^2

On the way up h (height) is increasing and the velocity v is decreasing.

Between C and E the given conditions hold

The reaction is an equal and opposite force applied by the road on the car's wheels in the direction of the car's motion.

What is Unbalanced Force?

Unbalanced force refers to a situation where the net force acting on an object is not zero, which causes the object to accelerate in a particular direction. When two or more forces act on an object and the net force is not equal to zero, the forces are said to be unbalanced.

Explanation of unbalanced forces: When the driver hits the brakes, the car's wheels apply a frictional force on the road in the opposite direction of the car's motion. This force is greater than the force that was previously keeping the car moving at a constant speed, and as a result, the net force on the car is in the opposite direction of its motion. This unbalanced force causes the car to slow down and eventually come to a stop.

Learn more about Unbalanced Force from given link

https://brainly.com/question/227461

#SPJ1

3.89 km/s is the rocket's final engine burn speed.

The rocket equation can be used to determine the rocket's thrust:

Thrust is calculated as follows: (final mass flow rate minus initial mass flow rate) x (exhaust gas mass flow rate x exhaust gas velocity)

The initial mass flow rate is 16,000 kg/s (0.8 x 20,000 kg).

The final mass flow rate is equal to 20,000 kg - 200 kg/s x t, where t is the engine's burn period.

We obtain the following by substituting the values in the question:

Thrust equals 360,000 N when calculated as (200 kg/s x 1.8 km/s + (20,000 kg - 200 kg/s x t - 16,000 kg) x 1.8 km/s)

20,000 kg - 200 kg/s x t = 0.2 x 20,000 kg

t = 20 seconds.

(c) The rocket equation can be used to determine the rocket's speed at the conclusion of its engine burn:

V is equal to (exhaust velocity) x ln[(initial mass)/(final mass)].

The rocket's final mass, which is what remains after all of its fuel has been consumed, is as follows:

final mass = (mass of rocket) - (mass of fuel)

final mass = 20,000 kg - 16,000 kg

final mass = 4,000 kg

Δv = 1.80 km/s x ln[(20,000 kg) / (4,000 kg)]

Δv = 1.80 km/s x ln(5)

Δv = 3.89 km/s

to know more about relative speed here;

brainly.com/question/14362959

#SPJ1

Answer: Both objects have small masses, and are close together.

Explanation:

Answer:

yes

Explanation:

A rare fraction is the area of a sound wave where the particles are less dense because it's moving through the air made of alternating areas of higher and lower density

a) E = 3.94 × 10⁵ N/C The directiοn οf the electric field is perpendicular tο the wire, b) In this case, the distance frοm the center οf the ring tο the pοint directly abοve it is z = 4.00 cm = 0.04 m,

a) Tο find the electric field at a pοint directly abοve the midpοint οf the wire, we can use the fοrmula fοr the electric field due tο a charged rοd:

E = kλ / r

where E is the electric field, k is Cοulοmb's cοnstant, λ is the charge density, and r is the distance frοm the wire tο the pοint where we want tο find the electric field.

In this case, the distance frοm the wire tο the pοint directly abοve its midpοint is r = 4.00 cm = 0.04 m. The charge density is given as λ = 175 nC/m = 1.75 × 10⁻⁴ C/m. Plugging these values intο the fοrmula, we get:

E = (9 × 10⁹N·m²/C²) × (1.75 × 10⁻⁴ C/m) / (0.04 m)

E = 3.94 × 10⁵ N/C

The directiοn οf the electric field is perpendicular tο the wire and pοints away frοm the wire, sο in this case, it pοints straight up.

b) Tο find the electric field at a pοint directly abοve the center οf the circular wire, we can use the fοrmula fοr the electric field due tο a charged ring:

[tex]Qz / (z^2+ R^2)^{1.5[/tex]

where E is the electric field, k is Coulomb's constant, Q is the total charge on the ring, z is the distance from the center of the ring to the point where we want to find the electric field, and R is the radius of the ring.

In this case, the distance from the center of the ring to the point directly above it is z = 4.00 cm = 0.04 m

To learn mοre about electric field follow the given link: https://brainly.com/question/28453368

#SPJ1

The torque 0,1 acting on the meter stick due to 1 is 3.92Nm.

The torque 0,2 acting on the meter stick due to 1 is 20.94Nm.

The torque 0,stick due to weight of meter stick is 2.45Nm.

The torque 0,pivot acting due to pivot is 0.

The rotating equivalent of force is torque. The moment of force is another name for it (also abbreviated to moment). It illustrates how a force can cause a change in the body's rotational motion.

The definition of torque is the product of the force's perpendicular component's magnitude and the force's line of action's separation from the point being measured. Torque can also be understood in terms of the law of conservation of energy.

Using the formula:

τ= r × F

where,

τ is the torque,

F is the force and,

r is the distance of the line of action of a force from the point around which torque is being determined.

Substituting the values and solving for torque:

The torque 0,1 acting on the meter stick due to 1 is 3.92Nm.

The torque 0,2 acting on the meter stick due to 1 is 20.94Nm.

The torque 0,stick due to weight of meter stick is 2.45Nm.

The torque 0,pivot acting due to pivot is 0.

To know more about Torque, visit:

https://brainly.com/question/25708791

#SPJ9

The entire distance that an object travels in a given amount of time is the definition of average speed for that object. Therefore, her average speed for the entire trip was 1.49 m/s.

What is the average speed of entire trip?

It is calculated by dividing the total distance something travels by the total amount of time it spends traveling.

average speed = total distance / total time

Now, let's find the total time. The time it takes to go from A to B is:

time = distance / speed = d / 2.3

The time it takes to go from B to A is:

time = distance / speed = d / 1.1

total time = d / 2.3 + d / 1.1

total time = (d * 1.1 + d * 2.3) / (2.3 * 1.1)

total time = (3.4d) / 2.53

Now, we can find the average speed:

average speed = 2d / [(3.4d) / 2.53]

average speed = (2 * 2.53) / 3.4

average sped = 1.49 m/s (rounded to two decimal places).

To know more about average speed visit:-

https://brainly.com/question/12322912

#SPJ1

The distance travelled by the plane in 27 seconds, given that the acceleration of the plane is 7.00 ft/s/, is 2551.5 ft

The distance travelled by the plane in 27 seconds can be obtained as illustrated below:

s = ut + 1/2at²  

s = (0 × 27) + (1/2 × 7 × 27²)

s =  0 + (3.5 × 729)

s  = 0 + 2551.5

s = 2551.5 ft

From the calculation made above, we can conclude that the distance travelled  is 2551.5 ft

Learn more about distance travelled:

https://brainly.com/question/18265275

#SPJ1

The coefficient of kinetic friction between the block and the surface is 0.5.

The coefficient of kinetic friction is a measure of the resistance between two objects that are in contact with each other and moving relative to each other. It is denoted by the symbol "μk" and is defined as the ratio of the force of kinetic friction between two objects and the normal force acting between them.

Here the block was initially at rest and after travelling some distance it came to rest, therefore change in kinetic energy ∆K=0

Therefore mgh = unghcotx - umgx = 0

where h = 1m, x = 1m

u= 1 / 1+1

= 0.5

Learn more about friction on

https://brainly.com/question/24338873

#SPJ1

The Procedure and Data section provides evidence that magnetic fields exist by demonstrating the force exerted by a magnetic field on a nearby object. In this experiment, two magnets are used, and one magnet is taped down on a smooth.

A magnet is an object that produces a magnetic field, which is a force that can attract or repel certain materials, such as iron, nickel, and cobalt. Magnets have two poles, called the north pole and the south pole, which are opposite in nature and attract each other, while like poles repel each other. This property of magnets is used in various applications, such as electric motors, generators, magnetic storage devices, and compasses. Magnets can be either natural, such as lodestone, or artificial, such as magnets made from iron, nickel, cobalt, or other magnetic materials.

To know more about magnet visit :

https://brainly.com/question/2841288

#SPJ1

A force known as centripetal force causes centripetal acceleration.

An object must experience a force directed towards the centre of the circle in order to travel evenly in a circle, because all things moving in uniform circular motion accelerate towards the centre. Its motion is caused by centripetal force. Gravity creates centripetal force in the event of orbiting satellites such as the moon orbiting the earth or the earth orbiting the sun. As athletes spin a huge ball on a chain, such as in the Olympic hammer throw, they generate centripetal force, which is then transmitted through the chain.

Newton's second law states that force and acceleration are connected by the formula F=ma. We already have formulas that express the centripetal acceleration relationships, so we can easily tweak them to demonstrate the relationships.

To know more about centripetal force visit:

brainly.com/question/14021112

#SPJ9

Answer: D. Most of her initial energy has been converted back to gravitational potential energy. As she falls, her gravitational potential energy is converted into kinetic energy. As she bounces back up, the kinetic energy is converted back into gravitational potential energy, and the process continues until she eventually comes to a stop. Some energy may be lost due to air resistance and friction, but the majority of the energy is conserved and converted back and forth between kinetic and potential forms.

The magnitude of the car's centripetal acceleration will be equal to the magnitude of its tangential acceleration 12.5 seconds after starting.

The centripetal acceleration, ac, of an object moving in a circular path of radius r and tangential speed v is given by:

ac = v^2/r

The tangential acceleration, at, is given by:

at = a

where a is the constant tangential acceleration.

Let's assume that the car starts at rest at the edge of the track, so its initial tangential speed, v0, is zero. Then the tangential speed of the car at time t is:

v = v0 + at = at

The time t when the magnitudes of ac and at are equal can be found by setting ac = at and solving for t:

ac = at

v^2/r = a

(at)^2/r = a

t = sqrt(ar/at)

Substituting r = 125 m and a = 1.5 m/s^2:

t = sqrt((1.5 m/s^2)(125 m)/(1.5 m/s^2)) = 12.5 s

Therefore, the magnitude of the car's centripetal acceleration will be equal to the magnitude of its tangential acceleration 12.5 seconds after starting.

More on centripetal acceleration can be found here: https://brainly.com/question/14465119

#SPJ1

The tοtal energy οf the system is 0.0181 J.  The velοcity at the amplitude can be fοund using the fοrmula fοr simple harmοnic mοtiοn.

Energy plays a crucial rοle in virtually every aspect οf οur lives and is invοlved in everything frοm the mοvement οf οbjects tο the functiοning οf οur cells and οrgans. Understanding the principles οf energy and its many fοrms is essential tο many fields, including physics, engineering, chemistry, and envirοnmental science.

Tο find the tοtal energy οf the By system, we need tο calculate the pοtential energy and kinetic energy οf the οscillating οbject.

[tex]U = (1/2) k x^2[/tex]

In this case, the displacement is the amplitude οf οscillatiοn, which is 2.9 cm οr 0.029 m. The spring cοnstant can be fοund using the fοrmula:

k = F/x

The fοrce can be calculated frοm the weight οf the οbject:

F = m g

where m is the mass οf the οbject and g is the acceleratiοn due tο gravity [tex](9.81 m/s^2)[/tex]. Therefοre,

[tex]F = 0.8 kg \times 9.81 m/s^2 = 7.848 N[/tex]

The spring cοnstant is then:

k = F/x = 7.848 N / 0.088 m = 89.09 N/m

The pοtential energy οf the spring at the maximum displacement (amplitude) is:

[tex]U = (1/2) k x^2 = (1/2) \times 89.09 N/m \times (0.029 m)^2 = 0.0122 J[/tex]

The kinetic energy οf the οscillating οbject can be fοund using the fοrmula:

[tex]K = (1/2) m v^2[/tex]

where v is the velοcity οf the οbject at any pοint during the οscillatiοn. At the maximum displacement, the velοcity is zerο, sο the kinetic energy is alsο zerο. At the equilibrium pοsitiοn, the velοcity is maximum, and it is equal tο the velοcity at the amplitude.:

v = ω A

where ω is the angular frequency οf the οscillatiοn, and A is the amplitude. The angular frequency can be fοund using the fοrmula:

ω = √(k/m)

Therefοre,

ω = √(89.09 N/m / 0.8 kg) = 4.195 rad/s

and

v = ω A = 4.195 rad/s × 0.029 m = 0.1217 m/s

The kinetic energy at the amplitude is then:

[tex]K = (1/2) m v^2 = (1/2)\times 0.8 kg \times (0.1217 m/s)^2 = 0.0059 J[/tex]

The tοtal energy οf the system is the sum οf the pοtential and kinetic energies:

E = U + K = 0.0122 J + 0.0059 J = 0.0181 J

Learn more about Energy from given link

https://brainly.com/question/2003548

#SPJ1

Below is an experiment investigating friction using a matchbox, pebbles, coins, string, small plastic bag, towel, small scale or balance.

Procedure:

By varying the variables in the experiment, you can observe how they impact the amount of friction between the matchbox and the surface.

For example, you might find that increasing the weight of the bag or using a rougher surface increases friction, while decreasing the weight of the bag or using a smoother surface decreases friction.

Friction is a force that opposes motion between two surfaces that are in contact. When two surfaces rub against each other, friction slows down or resists the movement of one surface over the other.

Friction arises due to the irregularities or roughness of the surfaces in contact, which causes the surfaces to interlock with each other and resist motion.

Learn about friction here https://brainly.in/question/1182128

#SPJ1

Carla is subjected to a 2,071 N force from the punching bag in the direction that is opposite to the direction in which Carla strikes the bag.

For every action, there is an equal and opposite response, states Newton's third rule of motion.

The force that the punching bag exerts on Carla is therefore identical in magnitude to the force that Carla exerts on the punching bag when she strikes it but in the opposite direction.

Carla applies a force of 2,071 N to the 32-kg punching bag, hence the punching bag also applies a force of 2,071 N to Carla but in the opposite direction.

This is due to Newton's third rule, which states that the forces exerted by Carla striking the punching bag and the punching bag striking Carla are equal and opposing forces.

As a result, Carla is subjected to a 2,071 N force from the punching bag in the direction that is opposite to the direction in which Carla strikes the bag.

learn more about force here

https://brainly.com/question/25239010

#SPJ1

Answer:30m/s square

Explanation: V-VO =  V

                        T          T

\overline{a} = average acceleration

v = final velocity

v_0 = starting velocity

t = elapsed time

=90-0 =30m/s square

   3

The new reading on the spring scale is 2mg/3. In the static configuration, the tension in the rope is equal to the weight of the two blocks, since they are not accelerating.

When the bottom block becomes detached, the remaining block will accelerate downwards due to the force of gravity. The pulley will also start to rotate, and the direction of the tension in the rope will change.

Let a be the acceleration of the remaining block, and let alpha be the angular acceleration of the pulley. Since the rope does not slide across the surface of the pulley, the acceleration of the two blocks must be the same. Therefore,

a = alpha * R

[tex]T * R = (1/2)MR^2 * \alpha[/tex]

where T is the tension in the rope.

Since the acceleration of the remaining block is downwards, the tension in the rope must be less than the weight of the block. Therefore,

T - mg = ma

Substituting the expression for a from the equation above, we get

[tex]T - mg = \alpha * R[/tex]

Substituting the expression for alpha from the torque equation above, we get

[tex]T - mg = (T * R) / (2 * R^2 / M)[/tex]

Simplifying, we get

T = 2mg / 3

To know more about tension visit:-

brainly.com/question/29763438

#SPJ1

Answer:  lava is basically what is outside of the earth's surface. And magma is what's inside the earth's surface.

Explanation:

Scientists use the term magma for molten rock that is underground and lava for molten rock that breaks through the Earth's surface.

1. Start by searching in academic databases such as Scholar and JSTOR for journal articles on this topic. Look for relevant keywords such as "diversity," "workforce," "hiring," and "non-business activities."

Diversity is the presence of different types of people and ideas in any given community, organization, or setting. It can be seen in the way people are different in terms of race, ethnicity, disability, language, socio-economic background, religious beliefs, and other personal characteristics. Diversity is essential for a healthy, and successful society, as it encourages the exchange of ideas, encourages creativity and innovation, and understanding.

To learn more about diversity

https://brainly.com/question/26794205

#SPJ1

Answer:

Explanation:

a) To find a z value such that the probability of obtaining a larger z value is 0.05, we need to find the z value such that the area to the right of it is 0.05. Using a standard normal distribution table or calculator, we find that z = 1.645.

b) To find a z value such that the probability of obtaining a larger z value is 0.025, we need to find the z value such that the area to the right of it is 0.025. Using a standard normal distribution table or calculator, we find that z = 1.96.

c) To find a z value such that the probability of obtaining a larger z value is 0.20, we need to find the z value such that the area to the right of it is 0.20. This is equivalent to finding the z value such that the area to the left of it is 0.80. Using a standard normal distribution table or calculator, we find that z = 0.84 (rounded to two decimal places).

When water is used to generate electricity in hydropower facilities, it is either stored in dams or is moving through rivers.

In a man-made lake, called reservoir, behind it, a traditional dam stores water. When the dam is breached, the water rotates a turbine that is coupled to an electricity-generating generator. On the dam's downstream side, the water trickles back into the river.

Hydropower is a renewable energy source since it depends on the sun-driven water cycle. A pure source of energy, hydropower is powered by water.

To know more about Hydroelectric visit:

https://brainly.com/question/15228003

#SPJ9

Answer:

measures body composition based on the rate at which an electrical current travels through the body

Explanation:

Answer:

It takes approximately 0.625 seconds for the person to be stopped by the airbag.

Explanation:

We can use the formula for average acceleration to solve this problem:

a = (v_f - v_i) / t

where:

a = average acceleration

v_f = final velocity (0 m/s)

v_i = initial velocity (15 m/s)

t = time

We know that the airbag provides a stopping force of 1200 N, which is equal to the net force on the person-car system. We can use Newton's second law of motion to find the acceleration of the person:

F_net = ma

where:

F_net = net force (1200 N)

m = mass of person (50 kg)

a = acceleration

Solving for a, we get:

a = F_net / m

a = 1200 N / 50 kg

a = 24 m/s^2

Now we can substitute the values of a, v_f, and v_i into the formula for average acceleration and solve for t:

a = (v_f - v_i) / t

24 m/s^2 = (0 m/s - 15 m/s) / t

t = -15 m/s / 24 m/s^2

t = 0.625 s

Therefore, it takes approximately 0.625 seconds for the person to be stopped by the airbag.