Solve the equation. (x2 + 3x3y4) dx + 2 ** y*dy = 0 (e Begin by separating the variables. Choose the correct answer below. y3 to A. - - -dy 4 dx 1 + 3y ets to B. dx = - 1 + 3y4 ets dy x3 + 3x3y4 X dy dx = C. です ets D. The equation is already separated. = An implicit solution in the form F(x,y) = C is = C, where C is an arbitrary constant. (Type an expression using x and y as the variables.)

The length g for the triangle in this problem is given as follows:

3.

The three trigonometric ratios are the sine, the cosine and the tangent of an angle, and they are obtained according to the rules presented as follows:

For the angle of 60º, we have that:

Hence we apply the sine ratio to obtain the length g as follows:

[tex]\sin{60^\circ} = \frac{g}{2\sqrt{3}}[/tex]

[tex]\frac{\sqrt{3}}{2} = \frac{g}{2\sqrt{3}}[/tex]

2g = 6

g = 3.

A similar problem, also about trigonometric ratios, is given at brainly.com/question/24349828

#SPJ1

The equation describes the rate of change of the amount of the substance, which decreases by 6.8% per day.

The equation dN/dt = -0.068N represents the rate of change of the amount of the chemical substance, where N represents the amount of the substance and t represents the number of days. The negative sign indicates that the amount of the substance is decreasing over time.

By solving this differential equation, we can determine the behavior of the substance's decay. Integrating both sides of the equation gives:

∫ dN/N = ∫ -0.068 dt

Applying the integral to both sides, we get:

ln|N| = -0.068t + C

Here, C is the constant of integration. By exponentiating both sides, we find:

|N| = e^(-0.068t + C)

Since the absolute value of N is used, both positive and negative values are possible for N. The constant C represents the initial condition, or the amount of the substance at t = 0 (N₀). Therefore, the general solution for the decay of the substance is:

N = ±e^(-0.068t + C)

This equation provides the general behavior of the amount of the chemical substance as it decays over time, with the constant C and the initial condition determining the specific values for N at different time points.

Learn more about differential equation here:

https://brainly.com/question/32538700

#SPJ11

To determine the absolute extremes of the function f(x) = 2x^3 - 6x^2 - 180 over the interval 1 < x < 4, we need to find the critical points and evaluate the function at these points as well as the endpoints of the interval. Answer :  the absolute minimum occurs at x = 2, and the minimum value is -208

1. Find the derivative of f(x):

f'(x) = 6x^2 - 12x

2. Set f'(x) equal to zero to find the critical points:

6x^2 - 12x = 0

Factor out 6x: 6x(x - 2) = 0

Set each factor equal to zero:

6x = 0, which gives x = 0

x - 2 = 0, which gives x = 2

So, the critical points are x = 0 and x = 2.

3. Evaluate the function at the critical points and the endpoints of the interval:

f(1) = 2(1)^3 - 6(1)^2 - 180 = -184

f(4) = 2(4)^3 - 6(4)^2 - 180 = -128

4. Compare the function values at the critical points and endpoints to find the absolute extremes:

The minimum value occurs at x = 2, where f(2) = 2(2)^3 - 6(2)^2 - 180 = -208.

The maximum value occurs at x = 4 (endpoint), where f(4) = -128.

Therefore, the absolute minimum occurs at x = 2, and the minimum value is -208.

Learn more about  function :  brainly.com/question/30721594

#SPJ11

The exact value of the definite integral ∫(7x³ + 5x - 2)dx over any interval [a, b] is (7/4) * (b⁴ - a⁴) + (5/2) * (b²- a²) + 2(b - a). This expression represents the difference between the antiderivative of the integrand evaluated at the upper limit (b) and the lower limit (a). It provides a precise value without any decimal approximations.

To compute the definite integral ∫(7x³ + 5x - 2)dx using the Fundamental Theorem of Calculus, we have to:

1: Determine the antiderivative of the integrand.

Compute the antiderivative (also known as the indefinite integral) of each term in the integrand separately. Recall the power rule for integration:

∫x^n dx = (1/(n + 1)) * x^(n + 1) + C,

where C is the constant of integration.

For the integral, we have:

∫7x³ dx = (7/(3 + 1)) * x^(3 + 1) + C = (7/4) * x⁴ + C₁,

∫5x dx = (5/(1 + 1)) * x^(1 + 1) + C = (5/2) * x²+ C₂,

∫(-2) dx = (-2x) + C₃.

2: Evaluate the antiderivative at the upper and lower limits.

Plug in the limits of integration into the antiderivative and subtract the value at the lower limit from the value at the upper limit. In this case, let's assume we are integrating over the interval [a, b].

∫[a, b] (7x³ + 5x - 2)dx = [(7/4) * x⁴ + C₁] evaluated from a to b

                          + [(5/2) * x² + C₂] evaluated from a to b

                          - [-2x + C₃] evaluated from a to b

Evaluate each term separately:

(7/4) * b⁴+ C₁ - [(7/4) * a⁴+ C₁]

+ (5/2) * b²+ C₂ - [(5/2) * a²+ C₂]

- (-2b + C₃) + (-2a + C₃)

Simplify the expression:

(7/4) * (b⁴- a⁴) + (5/2) * (b² - a²) + 2(b - a)

This is the exact value of the definite integral of (7x³+ 5x - 2)dx over the interval [a, b].

To know more about definite integral refer here:

https://brainly.com/question/32465992#

#SPJ11

The function given is [tex]\(f(x,y) = \sqrt{x^2 + y^2}\)[/tex]. The partial derivative with respect to[tex]\(x\) (\(f_x\)) is \(\frac{x}{\sqrt{x^2 + y^2}}\)[/tex].  The partial derivative with respect to [tex]\(y\) (\(f_y\)) is \(\frac{y}{\sqrt{x^2 + y^2}}\)[/tex].

[tex]\(f_x(3,5)\) is \(\frac{3}{\sqrt{3^2 + 5^2}}\)[/tex] .

- [tex]\(f_y(-6,1)\)[/tex] is [tex]\(\frac{1}{\sqrt{(-6)^2 + 1^2}}\)[/tex].

To find the partial derivative [tex]\(f_x\)[/tex], we differentiate [tex]\(f(x,y)\)[/tex] with respect to x while treating y as a constant. Using the chain rule, we get:

[tex]\[f_x = \frac{d}{dx}(\sqrt{x^2 + y^2}) = \frac{1}{2\sqrt{x^2 + y^2}} \cdot 2x = \frac{x}{\sqrt{x^2 + y^2}}.\][/tex]

Similarly, to find [tex]\(f_y\)[/tex], we differentiate [tex]\(f(x,y)\)[/tex] with respect to y while treating x as a constant:

[tex]\[f_y = \frac{d}{dy}(\sqrt{x^2 + y^2}) = \frac{1}{2\sqrt{x^2 + y^2}} \cdot 2y = \frac{y}{\sqrt{x^2 + y^2}}.\][/tex]

Substituting the given values, we find [tex]\(f_x(3,5) = \frac{3}{\sqrt{3^2 + 5^2}}\) and \(f_y(-6,1) = \frac{1}{\sqrt{(-6)^2 + 1^2}}\)[/tex].

To learn more about partial derivative refer:

https://brainly.com/question/30264105

#SPJ11

The equation of the ellipse satisfying the given conditions, with foci (*6, 0) and vertices (#10, 0), in standard form is (x/5)^2 + y^2 = 1. In the form Ax^2 + By^2 = C, the equation is 25x^2 + y^2 = 25.



An ellipse is a conic section defined as the locus of points where the sum of the distances to two fixed points (foci) is constant. The distance between the foci is 2c, where c is a positive constant. In this case, the foci are given as (*6, 0), so the distance between them is 2c = 12, which means c = 6.

The distance between the center and each vertex of an ellipse is a, which represents the semi-major axis. In this case, the vertices are given as (#10, 0). The distance from the center to a vertex is a = 10.To write the equation in standard form, we need to determine the values of a and c. We know that a = 10 and c = 6. The equation of an ellipse in standard form is (x-h)^2/a^2 + (y-k)^2/b^2 = 1, where (h, k) represents the center of the ellipse.

Since the center of the ellipse lies on the x-axis and is equidistant from the foci and vertices, the center is at (h, k) = (0, 0). Plugging in the values, we have (x/10)^2 + y^2/36 = 1. Multiplying both sides by 36 gives us the equation in standard form: 36(x/10)^2 + y^2 = 36.To convert the equation to the form Ax^2 + By^2 = C, we multiply each term by 100, resulting in 100(x/10)^2 + 100y^2 = 3600. Simplifying further, we obtain 10x^2 + y^2 = 3600. Dividing both sides by 36 gives us the final equation in the desired form: 25x^2 + y^2 = 100.

To learn more about vertices click here brainly.com/question/31502059

#SPJ11

The polynomial (f-g)(x) is equal to x^2 + 2x - 35.

To find (f-g)(x), we need to subtract g(x) from f(x).

Step 1: Find f(x) - g(x)

f(x) - g(x) = (x^2 + 3x - 28) - (x + 7)

Step 2: Distribute the negative sign to the terms inside the parentheses:

= x^2 + 3x - 28 - x - 7

Step 3: Combine like terms:

= x^2 + 3x - x - 28 - 7

= x^2 + 2x - 35

Therefore, (f-g)(x) = x^2 + 2x - 35.

The result is a polynomial in simplest form.

For more such question on polynomial

https://brainly.com/question/1496352

#SPJ8

The result for the given series is 2/([tex]2^{4}[/tex] + 2 * 27 * x + 2 * k * x) will be a sum of two terms, each of which can be evaluated using geometric series or other known series representations.

The given series is 2/([tex]2^{4}[/tex] + 2 * 27 * x + 2 * k * x). To determine the interval of convergence, we need to find the values of x for which the denominator of the fraction does not equal zero.

Setting the denominator equal to zero, we get [tex]2^{4}[/tex] + 2 * 27 * x + 2 * k * x = 0. Simplifying, we get 16 + 54x + kx = 0. Solving for x, we get x = -16/(54+k).

Since the series is a rational function with a polynomial in the denominator, it will converge for all values of x that are not equal to the value we just found, i.e. x ≠ -16/(54+k). Therefore, the interval of convergence is (-∞, -16/(54+k)) U (-16/(54+k), ∞), where U represents the union of two intervals.

To evaluate the series within the interval of convergence, we can use partial fraction decomposition to write 2/([tex]2^{4}[/tex] + 2 * 27 * x + 2 * k * x) as A/(x - r) + B/(x - s), where r and s are the roots of the denominator polynomial.

Using the quadratic formula, we can solve for the roots as r = (-27 + sqrt(27² - 2 * [tex]2^{4}[/tex] * k))/k and s = (-27 - sqrt(27² - 2 * [tex]2^{4}[/tex] * k))/k. Then, we can solve for A and B by equating the coefficients of x in the numerator of the partial fraction decomposition to the numerator of the original fraction.

Once we have A and B, we can substitute the expression for the partial fraction decomposition into the series and simplify. The result will be a sum of two terms, each of which can be evaluated using geometric series or other known series representations.

More on geometric series: https://brainly.com/question/30264021

#SPJ11

To find the value of angle θ (e) given that sin θ = 0.67, we need to take the inverse sine of 0.67. Using a calculator, we can determine the approximate value of e.

Using the inverse sine function (sin^(-1)), we find:

e ≈ sin^(-1)(0.67) ≈ 42.067°.

Therefore, the approximate value of angle e, rounded to three decimal places, is 42.067°.

Learn more about decimal here : brainly.com/question/30958821

#SPJ11

We are able to deduce from the information that has been supplied that the total number of squared products that the variables m and f contribute to add up to 3,892 in total.

To determine the value of m2f, first each value of m is multiplied by the value of "f" that corresponds to it, then the result is squared, and finally all of the squared products are put together. This process is repeated until the desired value is determined. Let's analyse the calculation by breaking it down into the following components:

For m = 2, f = 82: (2 * 82)² = 27,664.

For m = 3, f = 278: (3 * 278)² = 231,288.

For m = 4, f = 432: (4 * 432)² = 373,248.

For m = 5, f = 16: (5 * 16)² = 2,560.

For m = 6, f = 6: (6 * 6)² equals 216.

For m = 7, f = 3: (7 * 3)² = 441.

For m = 8, f = 1: (8 * 1)² equals 64.

After tallying up all of the squared products, we have come to the conclusion that the total number we have is 635,481: 27,664 + 231,288 plus 373,248 plus 2,560 plus 216 plus 441 plus 64.

The total number of squared products that contain both m and f comes to 635,481 as a direct result of this.

Learn more about variables here:

https://brainly.com/question/29583350

#SPJ11

To find the volume of the solid obtained by rotating the region enclosed by the curves y = ln(x) + 2, y = 0, y = 7, and x = 0 about the y-axis, we can use the method of cylindrical shells to set up an integral and evaluate it.

The volume of the solid obtained by rotating the region about the y-axis can be found by integrating the cross-sectional area of each cylindrical shell from y = 0 to y = 7.

For each value of y within this range, we need to find the corresponding x-values. From the equation y = ln(x) + 2, we can rewrite it as[tex]x = e^(y - 2).[/tex]

The radius of each cylindrical shell is the x-value corresponding to the given y-value, which is x = e^(y - 2).

The height of each cylindrical shell is given by the differential dy.

Therefore, the volume of the solid can be calculated as follows: [tex]V = ∫[0 to 7] 2πx dy[/tex]

Substituting the value of x = e^(y - 2), we have: V = ∫[0 to 7] 2π(e^(y - 2)) dy

Simplifying the integral, we get: [tex]V = 2π ∫[0 to 7] e^(y - 2) dy[/tex]

To evaluate this integral, we can use the property of exponential functions:

[tex]∫ e^(kx) dx = (1/k) e^(kx) + C[/tex]

In our case, k = 1, so the integral becomes[tex]: V = 2π [e^(y - 2)][/tex]from 0 to 7

Evaluating this integral, we have: [tex]V = 2π [(e^5) - (e^-2)][/tex]

This gives us the volume of the solid obtained by rotating the region about the y-axis.

Learn more about volume here;

https://brainly.com/question/27710307

#SPJ11

Events a and b are not independent. The probability of both events occurring is 0.2, which is less than the product of their individual probabilities (0.7 x 0.4 = 0.28).

If events a and b were independent, the probability of both events occurring would be the product of their individual probabilities (P(a) x P(b)). However, in this scenario, the probability of both events occurring is 0.2, which is less than the product of their individual probabilities (0.7 x 0.4 = 0.28). This suggests that the occurrence of one event affects the occurrence of the other, indicating that they are dependent events.

Independence between events a and b refers to the idea that the occurrence of one event does not affect the probability of the other event occurring. In other words, if events a and b are independent, the probability of both events occurring is equal to the product of their individual probabilities. However, in this scenario, we are given that the probability of event a occurring is 0.7, the probability of event b occurring is 0.4, and the probability of both events occurring is 0.2. To determine whether events a and b are independent, we can compare the probability of both events occurring to the product of their individual probabilities. If the probability of both events occurring is equal to the product of their individual probabilities, then events a and b are independent. However, if the probability of both events occurring is less than the product of their individual probabilities, then events a and b are dependent.

To know more about probability  visit :-

https://brainly.com/question/31828911

#SPJ11

The pipeline with a length of 1 kilometer will require approximately 314,159,265 cubic centimeters of oil to fill.

To find the volume of the pipeline, we need to calculate the volume of a cylinder. The formula for the volume of a cylinder is V = πr^2h, where V is the volume, r is the radius, and h is the height (or length) of the cylinder.

Inside diameter of the pipeline = 20 centimeters

Radius (r) = diameter / 2 = 20 cm / 2 = 10 cm

To convert the length of the pipeline from kilometers to centimeters, we multiply by 100,000:

Length of the pipeline = 1 kilometer * 100,000 = 100,000 centimeters

Now, we can calculate the volume of the pipeline:

V = πr^2h = π * 10^2 * 100,000 = 3.14159 * 100 * 100,000 = 314,159,265 cubic centimeters

Therefore, it will take approximately 314,159,265 cubic centimeters of oil to fill 1 kilometer of the pipeline.

Learn more about volume of a cylinder here:

https://brainly.com/question/15891031

#SPJ11

(a) The relation R is reflexive. (b) The relation R is symmetric but not antisymmetric. (c) The relation R is transitive. (d) The relation R is not an equivalence relation. (e) The set (A, R) does not form a partially ordered set.

(a) The relation R is reflexive because every positive integer a has all its prime factors in common with itself.

Therefore, aRa is true for all positive integers a.

(b) The relation R is symmetric because if a is a positive integer and b is another positive integer with the same prime factors as a, then b also has the same prime factors as a.

However, R is not antisymmetric because there can be positive integers a and b such that aRb and bRa but a is not equal to b.

(c) The relation R is transitive because if aRb and bRc, it means that all the prime factors of a are also prime factors of b, and all the prime factors of b are also prime factors of c.

Therefore, all the prime factors of a are also prime factors of c, satisfying the transitive property.

(d) The relation R is not an equivalence relation because it is not reflexive, symmetric, and transitive.

It is only reflexive and transitive but not symmetric. An equivalence relation must satisfy all three properties.

(e) (A, R) does not form a partially ordered set because a partially ordered set requires that the relation is reflexive, antisymmetric, and transitive.

In this case, R is not antisymmetric, so it does not meet the requirements of a partially ordered set.

Learn more about equivalence relation here:

https://brainly.com/question/30956755

#SPJ11

The percent changes that we need to write in the table are, in order from top to bottom:

To find the percent change, we need to use the formula:

P = 100%*(final population - initial population)/initial population.

For the first case, we have:

initial population = 111

final population = 128

Then:

P = 100%*(128 - 111)/111 = 15.32%

For the second case we have:

initial population = 128

final population = 117

P = 100%*(117 - 128)/128 = -8.6%

For the last case:

initial population = 117

final population = 147

then:

P = 100%*(147 - 117)/117 = 25.64%

These are the percent changes.

Learn more about percent changes at:

https://brainly.com/question/11360390

#SPJ1

The [tex]125^{8x-6}[/tex], can be expressed in the form 5y,  as  5^{(24x-18)} .

An expression, often known as a mathematical expression, is a finite collection of symbols that are well-formed in accordance with context-dependent principles.

Given that

[tex]125^{8x-6}[/tex]

then we can express 125 inform of a power of 5  which can be expressed as [tex]125 = 5^{5}[/tex]

Then the expression becomes

[tex]5^{3(8x-6)}[/tex]

=[tex]5^{(24x-18)}[/tex]

Learn more about expression at;

https://brainly.com/question/1859113

#SPJ1

The function f(x) = x^3 + 18x^2 + 2 is decreasing on the interval (-∞, -12) and (0, ∞).

To determine the intervals on which the function is decreasing, we need to find where the derivative of the function is negative. Let's find the derivative of f(x) first:

f'(x) = 3x^2 + 36x.

To find where f'(x) is negative, we set it equal to zero and solve for x:

3x^2 + 36x = 0.

3x(x + 12) = 0.

From this equation, we find two critical points: x = 0 and x = -12. We can use these points to determine the intervals of increase and decrease.

Testing the intervals (-∞, -12), (-12, 0), and (0, ∞), we can evaluate the sign of f'(x) in each interval. Plugging in a value less than -12, such as -13, into f'(x), we get a positive value. For a value between -12 and 0, such as -6, we get a negative value. Finally, for a value greater than 0, such as 1, we get a positive value.

Learn more about critical points here:

https://brainly.com/question/32077588

#SPJ11

The height of the cylinder is 7/2 inches.

To find the height of the cylinder, we can use the formula for the volume of a cylinder:

V = πr²h

Where:

V = Volume of the cylinder

π = 22/7

r = Radius of the cylinder

h = Height of the cylinder

Given that the volume V is 1 2/9 in³ and the radius r is 1/3 in, we can substitute these values into the formula:

1 2/9 = (22/7) x (1/3)² x h

To simplify, let's convert the mixed number 1 2/9 to an improper fraction:

11/9 = 22/7 x 1/3 x 1/3 x h

11/9 x 63/22 = h

h = 7/2

Therefore, the height of the cylinder is 7/2 inches.

Learn more about volume of a cylinder click;

https://brainly.com/question/15891031

#SPJ1

The problem asks us to use a change of variables to find the indefinite integral of the given expression, and then verify our result by differentiation. The original integral is[tex]\int\limits(1/\sqrt(4 - 25x^2)) dx[/tex], and we need to find a suitable change of variables to simplify the integral.

To find a suitable change of variables, we notice that the expression inside the square root resembles the standard form of a trigonometric identity. In this case, we can use the substitution x = (2/5)sin(u).

First, we find the derivative [tex]dx/dt: dx/dt = (2/5)cos(u).[/tex]

Next, we substitute x and dx in terms of u into the original integral:

[tex]\int\limits(1/\sqrt (4 - 25x^2)) dx = \int\limit(1/\sqrt(4 - 25((2/5)sin(u))^2))((2/5)cos(u)) du.[/tex]

Simplifying further, we get[tex]: \int\limits(1/\sqrt(4 - 4sin^2(u)))((2/5)cos(u)) du = \int\limits(1/\sqrt(4cos^2(u)))((2/5)cos(u)) du = \int\limits(1/2) du = (1/2)u + c[/tex]

To verify our result, we differentiate (1/2)u + C with respect to u:

d/dt((1/2)u + C) = 1/2, which matches the integrand[tex]1/\sqrt(4 - 25x^2)[/tex]in the original expression.

Therefore, the indefinite integral of[tex]\sqrt(4 - 25x^2)[/tex] with respect to x is (1/2)arcsin(2x/5) + C, where C is the constant of integration.

Learn more about variables here;

https://brainly.com/question/28248724

#SPJ11

There are 55 counters in a box.

We have to given that;

There are C counters in a box, 11 of the counters are green

And, Benedict takes 20 counters at random from the box 4 of these counters are green.

Since, Any relationship that is always in the same ratio and quantity which vary directly with each other is called the proportional.

Hence, By definition of proportion we get;

⇒ c / 11 = 20 / 4

Solve for c,

⇒ c = 11 × 20 / 4

⇒ c = 11 × 5

⇒ c = 55

Therefore, The value of counters in a box is,

⇒ c = 55

Learn more about the proportion visit:

https://brainly.com/question/1496357

#SPJ1

The volume of the figure (1) is 942 cubic inches.

1) Given that, height = 13 inches and radius = 6 inches.

Here, the volume of the figure = Volume of cylinder + Volume of hemisphere

= πr²h+2/3 πr³

= π(r²h+2/3 r³)

= 3.14 (6²×13+ 2/3 ×6³)

= 3.14 (156+ 144)

= 3.14×300

= 942 cubic inches

So, the volume is 942 cubic inches.

2) Volume = 4×4×5+4×4×6

= 176 cubic inches

Therefore, the volume of the figure (1) is 942 cubic inches.

To learn more about the volume visit:

https://brainly.com/question/13338592.

#SPJ1

The three derivative rules used to find the derivative of the given function f(x) = (4e* In-e") [C5] are product rule, chain rule and quotient rule.

The given function is f(x) = (4e* In-e") [C5].

We can find its derivative using the following derivative rules:

Product Rule: If u(x) and v(x) are two functions of x, then the derivative of their product is given by d/dx(uv) = u(dv/dx) + v(du/dx)

Quotient Rule: If u(x) and v(x) are two functions of x, then the derivative of their quotient is given by d/dx(u/v) = (v(du/dx) - u(dv/dx))/(v²)

Chain Rule: If f(x) is a composite function, then its derivative can be calculated using the chain rule as d/dx(f(g(x))) = f'(g(x))g'(x)

Now, let's find the derivative of the given function using the above rules:Let u(x) = 4e, v(x) = ln(e⁻ˣ) = -x

Using the product rule, we have:f'(x) = u'(x)v(x) + u(x)v'(x)f(x) = 4e⁻ˣ + (-4e) * (-1) = -4eˣ⁺¹

Therefore, f'(x) = d/dx(-4eˣ⁺¹) = -4e

Using the chain rule, we have:g(x) = -xu(g(x))

Using the chain rule, we have:f'(x) = d/dx(u(g(x)))

= u'(g(x))g'(x)f'(x)

= 4e⁻ˣ * (-1)

= -4e⁻ˣ

Finally, using the quotient rule, we have:f(x) = (4e* In-e") [C5] = 4e¹⁻ˣ

Using the power rule, we have:f'(x) = d/dx(4e¹⁻ˣ) = -4e¹⁻ˣ

To know more about Chain Rule click on below link:

https://brainly.com/question/30764359#

#SPJ11

In betweenness and incidence geometry, the point D lies in the interior of angle CAB if and only if it is between points B and C on line BC.

In betweenness and incidence geometry, we have the following axioms:

Proof:

Conversely,

Thus, we have proved that D is in the interior of angle CAB if and only if B * D * C.

LEARN MORE ABOUT geometry here: brainly.com/question/16836548

#SPJ11

Given equation is ln(4x + 5) + 4x = 25. We are required to find an integer n so that the interval (n, n+1) contains a solution to this equation.

To solve this equation, we have to use numerical methods. We can use the trial and error method or use graphical methods to find the solution.Let's consider the graphical method:First, let's plot the graphs of y = ln(4x + 5) + 4x and y = 25 and see where they intersect. We can use the Desmos graphing calculator for this.Step 1: Visit the Desmos Graphing Calculator website.Step 2: Enter the equations y = ln(4x + 5) + 4x and y = 25 in the given field.Step 3: Adjust the window of the graph to see the intersection points, which are shown in the image below.Image of the graph shown on Desmos calculator.The graph of y = ln(4x + 5) + 4x intersects the graph of y = 25 in the interval (4, 5).Thus, n = 4.Therefore, the solution is as follows:n = 4.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

The volume of the solid generated by revolving the region bounded by the equations y = 16 - x² and y = 0, between x = -2 and x = 2, around the x-axis is 256π/3 cubic units.

To find the volume, we can use the method of cylindrical shells. Consider an infinitesimally thin vertical strip of width dx at a distance x from the y-axis. The height of this strip is given by the difference between the two curves: y = 16 - x² and y = 0. Thus, the height of the strip is (16 - x²) - 0 = 16 - x². The circumference of the shell is 2πx, and the thickness is dx.

The volume of this cylindrical shell is given by the formula V = 2πx(16 - x²)dx. Integrating this expression over the interval [-2, 2] will give us the total volume. Therefore, we have:

V = ∫[from -2 to 2] 2πx(16 - x²)dx

Evaluating this integral gives us V = 256π/3 cubic units. Hence, the volume of the solid generated by revolving the region bounded by the given equations around the x-axis is 256π/3 cubic units.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

To find the absolute extrema of the function g(x) = 4x^2 - 8x on the closed interval [0, 4], we need to evaluate the function at its critical points and endpoints. The general solution of a differential equation typically involves finding an antiderivative of the given equation and including a constant of integration.

To find the critical points of g(x), we take the derivative and set it equal to zero: g'(x) = 8x - 8. Solving for x, we get x = 1, which is the only critical point within the interval [0, 4]. Next, we evaluate g(x) at the critical point and endpoints: g(0) = 0, g(1) = -4, and g(4) = 16. Therefore, the absolute minimum occurs at (1, -4) and the absolute maximum occurs at (4, 16). Moving on to the differential equation, without a specific equation given, it is not possible to find the general solution. The general solution of a differential equation typically involves finding an antiderivative of the equation and including a constant of integration denoted by C.

To know more about extrema here: brainly.com/question/2272467

#SPJ11

(A) To find the antiderivative of the function f(x, y) = 6ln(x)xy with respect to y, we treat x as a constant and integrate: ∫ 6ln(x)xy dy = 6ln(x)(1/2)y^2 + C,

where C is the constant of integration.

(B) Using the antiderivative we found in part (A), we can evaluate the definite integral: ∫[a, b] 6ln(x) dy = [6ln(x)(1/2)y^2]∣[a, b].

Substituting the upper and lower limits of integration into the antiderivative, we have: [6ln(x)(1/2)b^2] - [6ln(x)(1/2)a^2] = 3ln(x)(b^2 - a^2).

Therefore, the value of the definite integral is 3ln(x)(b^2 - a^2).

Learn more about antiderivative here: brainly.in/question/5528636
#SPJ11

To find the new area of Suzy's frame after upgrading with a scale factor of 12/5, we need to multiply the area of the original frame by the square of the scale factor.

Hence , Given that the original area of the frame is 19 in², we can calculate the new area as follows: New Area = (Scale Factor)^2 * Original Area

Scale Factor = 12/5. New Area = (12/5)^2 * 19 in² = (144/25) * 19 in²

= 6.912 in² (rounded to three decimal places). Therefore, the new area of Suzy's frame after upgrading will be approximately 6.912 square inches.

To Learn more about scale factor  click here : brainly.com/question/29464385

#SPJ11

The value of slant height of cone is,

⇒ l = 4.2 feet

We have to given that,

The slant height of a cone with a volume of approximately 28.2 ft and a height of 2 ft.

Now, We know that,

Volume of cone is,

⇒ V = πr²h / 3

Here, We have;

⇒ V = 28.2 feet

⇒ h = 2 feet

Substitute all the values, we get;

⇒ V = πr²h / 3

⇒ 28.2 = 3.14 × r² × 2 / 3

⇒ 28.2 × 3 = 6.28r²

⇒ 84.6 = 6.28 × r²

⇒ 13.5 = r²

⇒ r = √13.5

⇒ r = 3.7 feet

Since, We know that,

⇒ l² = h² + r²

Where, 'l' is slant height and 'r' is radius.

⇒ l² = 2² + 3.7²

⇒ l² = 4 + 13.5

⇒ l² = 17.5

⇒ l = √17.5

⇒ l = 4.2 feet

Thus, The value of slant height of cone is,

⇒ l = 4.2 feet

To learn more about the volume visit:

brainly.com/question/24372707

#SPJ1

To find a formula for h(x) = (f∘g)(x), we need to substitute the expression for g(x) into f(x) and simplify.

Given:

f(x) = √(x² - 9²)

g(x) = √(9 - x)

Substituting g(x) into f(x):

h(x) = f(g(x)) = f(√(9 - x))

Simplifying:

h(x) = √((√(9 - x))² - 9²)

    = √(9 - x - 81)

    = √(-x - 72)

Therefore, the formula for h(x) is h(x) = √(-x - 72).

Now, let's determine the domain of h(x). Since h(x) involves taking the square root of a quantity, the radicand (-x - 72) must be greater than or equal to zero.

-x - 72 ≥ 0

Solving for x:

-x ≥ 72

x ≤ -72

Therefore, the domain of h(x) is x ≤ -72, expressed in interval notation as (-∞, -72].

Visit here to learn more about interval notation:

brainly.com/question/29184001

#SPJ11