Isotopes are atoms that belong to the same element: 11 protons, 10 neutrons, 11 electrons, 13 protons 14 neutrons, and 13 electrons
What are isotopes?An isotope is one of two or more atom types of a chemical element that share the same atomic number, position on the periodic table, chemical behavior, and physical properties, but differ in atomic mass. One or more isotopes can be found in any chemical element. The number of protons in an atom's nucleus is the first criterion for determining its identity and labeling.
The observation that all atoms with the same atomic number have roughly the same chemical properties—if not exactly the same—gives this atomic number its significance. The symbol Z is typically used to represent this number. An ingot of pure uranium, for instance, only contains atomic number 92 atoms. Each atomic number has a place on the periodic table of elements, and each of these places is labeled with the element's common name, like calcium, radon, or uranium.
Learn more about isotopes :
brainly.com/question/28039996
#SPJ1
PLS HELP WITH CHEMISTRY 19! PLS
ANSWER ALL SQUARES
The steps done and develops human skills or builds structures to reduce risk you are doing
The steps done and develops human skills or builds structures to reduce risk you are doing is a. capacity building.
The capacity building is the process of the developing the skill or the strengthening the skills. There are the four steps in the capacity building.
1) Needs the assessment
2) Design
3) Implementation
4) Monitoring
These are process to reduce the risk of what you are doing. The capacity building includes the leadership developments. The capacity budling consist of the training and the mentorships.
Thus the capacity budling is The steps done and develops human skills or builds structures to reduce risk you are doing
This question is incomplete, the complete question is :
The step done and develops human skills or builds structures to reduce risks you are doing.
a. capacity building
b. training
c. facility constructing
d. skills honing
To learn more about risk here
https://brainly.com/question/29321416
#SPJ4
11 B
5
Mass =
Protons =
Neutrons =
Element =
what volume did the methane gas occupy in the erlenmeyer flask before the syringe was attached to the flask?
When the gas syringe gets inserted into and attached to the Erlenmeyer flask which contains the methane gas, the gas expands and enters the gas syringe.
Charles law states that the volume which is occupied by an ideal gas is directly proportional to the absolute temperature at constant pressure conditions. It also sometimes known as the law of volumes as it also describes how gases are able to expand with increase in temperature.
When a syringe is inserted into the Erlenmeyer flask which contains the methane gas, some of that gas in the flask expands and enters into the syringe.
--The given question is incomplete, the complete question is
"What happens after the gas syringe is inserted into the Erlenmeyer flask containing the methane gas?"--
To know more about Erlenmeyer flask here
https://brainly.com/question/25488854
#SPJ4
which gas is not an example of a naturally occurring greenhouse gas?
nitrogen and chloro fluro carbon gas is not an example of a naturally occurring greenhouse gas
Water vapour, carbon dioxide, methane, nitrous oxide, and ozone are examples of naturally occurring greenhouse gases. Hydro-fluorocarbons (HFCs), perfluorocarbons (PFCs), and sulphur hexafluoride (SF6) are examples of artificial greenhouse gases that are produced via a number of industrial operations. Carbon dioxide, methane, ozone, nitrous oxide, chlorofluorocarbons, and water vapour are some examples of greenhouse gases. The gas that is not a greenhouse gas is therefore nitrogen. The different greenhouse gases include nitrous oxide, water vapour, ozone, chlorofluorocarbons, methane, and chlorofluorocarbons. Infrared light cannot pass through oxygen or nitrogen, hence they are not considered greenhouse gases. These molecules are invisible because stretching one of them has no effect on the electric field. These symmetric molecules are composed of two identical atoms whose electric fields simply cancel one another out.
which gas is not an example of a naturally occurring greenhouse gas?
1. nitrogen
2.cholrofluoro carbons
3. oxygen
4. carbondioxide
Learn more about nitrogen here:
https://brainly.com/question/16711904
#SPJ4
Which atom gives up its electrons most easily?
___Ca2+ + ___O2 ---> Cr2O3
Answer:
Balancing chemical equations is my priority!! :-)
[tex]Ca_{2}[/tex] + [tex]O_{2}[/tex] = [tex]Ca_{2} O_{3}[/tex]
On both sides Calcium (Ca) is balanced ( 2 and 2 )
Then Oxygen (O) is 2 on the reactant side and 3 on the product side.
Divide the subscripts (product subscript/reactant subscript) to give 1.5 (3/2)
Because you can't put 1.5 in an equation you multiply everything by 2.
Then it comes [tex]2Ca_{2}[/tex] + [tex]3O_{2}[/tex] = [tex]2Ca_{2} O_{3}[/tex]
Have a wonderful day! :-)
Rank these cars in order of increasing momentum:
Car A: 1000 Kg moving at 20 m/s
Car B: 1200 Kg moving at 30 m/s Car C: 2000 Kg moving at 3 m/s
Car C has the highest momentum, followed by Car B, and Car A has the lowest momentum.
Calculate the momentum of each car?Car C: 2000 Kg moving at 3 m/s Car A: 1000 Kg moving at 20 m/sCar B: 1200 Kg moving at 30 m/sMomentum is calculated by multiplying the mass of an object by its velocity. This means that Car C has the highest momentum of 2000 Kg x 3 m/s = 6000 kg m/s. Car B has a momentum of 1200 Kg x 30 m/s = 36000 kg m/s. Finally, Car A has a momentum of 1000 Kg x 20 m/s = 20000 kg m/s. Thus, the order of increasing momentum is Car A, Car B, and Car C. When two objects collide, the total momentum of both objects before the collision is equal to the total momentum of both objects post-collision, which is known as the law of conservation of momentum. Car C has the highest momentum before the collision, so it will have the highest momentum after the collision as well. This means that Car C will have the highest kinetic energy after the collision, and will be the most difficult to stop. Car B will have the second highest momentum, and Car A will have the lowest. In conclusion, the order of increasing momentum is Car A, Car B, and Car C. Car C has the highest momentum, followed by Car B, and Car A has the lowest momentum. This order is important to consider when two cars are involved in a collision, as it will determine which car will have the highest kinetic energy after the collision.To learn more about Momentum refer to:
https://brainly.com/question/1042017
#SPJ1
An aqueous solution of hydrogen
peroxide, H₂O₂, decomposes to
form water and oxygen gas. Write
a balanced symbol equation,
including state symbols, for this
reaction.
When hydrogen peroxide
decomposes, what mass of
hydrogen peroxide is needed
in solution to produce 1.6g of
Oxygen gas?
According to the equation, hydrogen peroxide in aqueous solution breaks down upon heat to produce oxygen: 2H2O2(aq)→2H2O(l)+O2(g).
To make 1.6g of oxygen gas, 34g of hydrogen peroxide must be in solution.
equation:
2H2O2 —————— O2 to 2H2O mole ratio is 2: 2: 1 RMM of O2 - (16*2) = 32 RFM of H2O2 - (1*2) + (16*2) = 34
1 Mole of O2 in 32 g? 1.6 g 1.6/32 = 0.5 moles
0.5*2 = 1 MOLE OF H2O2 and 34*34 = 34 g.
A hydrogen's position.It is mainly present in Jupiter, and is present in the sun and the majority of stars. Water is where hydrogen is found most frequently on Earth. It only occurs as a gas in the atmosphere at trace concentrations, less than 1 part per minute by volume.
To know more about Hydrogen visit:
https://brainly.com/question/28937951
#SPJ1
what type of intermolecular force forms during the solvation process when a polar molecule like of2 dissolves in water?
Interactions between ions and dipoles. Ion-Dipole Forces were engaged for solutions in which an ionic chemical is immersed in a polar solvent, for example a table salt (NaCl) water solution.
Ion-dipole intermolecular forces seem to be electrostatic reactions between such a polar molecule as well as an ion that are frequently caused by the dissolution of ionic compounds within polar substances. The attraction here between the negative ends of one polar molecule as well as the positive ends of another polar molecule is known as dipole-dipole forces.
In polar solvents, polar molecules were also soluble (Predominant intermolecular force will be a dipole-dipole attraction between polar solute molecule as well as polar solvent molecule).
To know more about polar solvent
https://brainly.com/question/20515334
#SPJ4
an aqueous sodium acetate, nac2h3o2 , solution is made by dissolving 0.195 mol nac2h3o2 in 0.750 kg of water. calculate the molality of the solution.
The molality of solution is 0.26 mol/kg
Molality is defined as "The ratio of the number of moles of solute present in a solution to the mass of the solvent in kilograms".
The unit that is used to represent molality is mol/kg.
The formula used to calculate molality is given below:
Molality = moles of solute/ mass of solvent in kg-----> (i)
Here,
Given values:
Moles of NaC₂H₃O₂ (solute) = 0.195mol
Mass of solvent (water) = 0.750 kg
Putting these values in equation (i), we get-
Molality
= 0.195 mol/0.750 kg
=0.26 mol/kg
Hence, the molality of solution is 0. 26 mol/kg
To know more about molality here
https://brainly.com/question/29450963
#SPJ4
(60 Points)
Stoichiometry Help
1. The following reaction shows calcium chloride reacting with silver nitrate. CaCl2 + AgNO3 → AgCl + Ca(NO3)2 How many grams of AgCl are produced from 30. 0 grams of CaCl2?
(Molar mass of Ca = 40. 078 g/mol, Cl = 35. 453 g/mol, O = 15. 999 g/mol, Ag = 107. 868 g/mol, N = 14. 007 g/mol)
A. 19. 4 grams
B. 38. 8 grams
C. 58. 2 grams
D. 77. 5 grams
2. A synthesis reaction takes place when carbon monoxide (CO) and hydrogen gas (H2) react to form methanol (CH3OH). How many grams of methanol are produced when 14 grams of carbon monoxide reacts with 1. 5 grams of hydrogen gas?
A. 6 grams
B. 8 grams
C. 12 grams
D. 16 grams
3. Read the chemical equation.
Mg + 2HCl → MgCl2 + H2
How many moles of MgCl2 are produced from 4 moles of HCl?
A. 0. 2
B. 0. 5
C. 1. 0
D. 2. 0
Since the equation for the given reaction is balanced, one mole of AgCl is created for every mole of CaCl2 that reacts. We may utilize the molar mass of CaCl2, which is (40.078 g/mol + 2*35.453 g/mol) = 111.012 g/mol.
to get the number of moles. Molar mass divided by mass equals a mole. moles equal 30 g / 111.012 g/mol, or 0.270 mol. CaCl2 and AgCl react 1:1, hence 0.270 mol of AgCl will be created from 0.270 mol of CaCl2 in this reaction. We may use the molar mass of AgCl, which is (107.868 g/mol + 35.453 g/mol) = 143.321 g/mol, to get the mass of AgCl created. mass is determined by multiplying the number of moles by the molar mass. mass = 143.321 g/mol x 0.270 mol, or 38.89 g Therefore, 38.89 g of AgCl will In chemistry, a mole is a unit of measurement that is used to represent how much a chemical compound is present. Avogadro's number, or 6.022 x 1023, of particles makes up one mole of a material. The mole is an useful way to express extremely large amounts of atoms, ions, or molecules since this quantity is so huge. The mole is based on the mass and number of atoms or molecules in a sample of a material.
learn more about mole here:
https://brainly.com/question/26416088
#SPJ4
How many mL of butane would you
add to hexane to make 750 mL of a
25.0% by volume butane solution?
Considering the definition of volume percentage, 187.5 mL of butane you would add to hexane to make 750 mL of a 25.0% by volume butane solution
Volume percentageVolume Percentage is defined as the ratio of the volume of the component to the volume of the solution, expressed as a percentage. That is, it refers to the volume of solute per 100 volume units of the solution.
The volume percentage of a solution is determined by the following expression:
Volume Percentage= (volume of solute÷ volume of solution) ×100%
Volume of butaneIn this case, you know:
volume percentage= 25 %volume of solute= ?volume of solution= 750 mLReplacing in the definition of volume percentage:
25%= (volume of solute÷ 750 mL) ×100%
Solving:
25%÷ 100%= volume of solute÷ 750 mL
0.25= volume of solute÷ 750 mL
0.25× 750 mL= volume of solute
187.5 mL= volume of solute
Finally, the volume of butane in the solution is 187.5 mL.
Learn more about volume percentage:
brainly.com/question/1713808
#SPJ1
1.
Part II: True Statements
Directions: Circle the word in parentheses that makes each statement true.
New substances are formed during a (physical, chemical) change.
Many physical and chemical changes are affected by (light, temperature).
3.
A (physical, chemical) change is one where no new substances are formed.
2.
Independent Practice
4.
5.P 9.1 Chemical and Physical Changes
The mass of a melted candle (will, will not) change, but the mass of a burned
candle (will, will not) change.
The mass of a melted candle will not change after it has been melted.
The mass of a melted candleThis is an example of a physical change, where the form of the candle has changed but it is still made up of the same elements and compounds.On the other hand, the mass of a burned candle will change, as the candle is no longer made of the same elements and compounds.This is an example of a chemical change, where new substances are formed from the original elements and compounds.Both physical and chemical changes can be affected by light and temperature.For example, when a candle is exposed to heat and light, the temperature of the candle increases and the candle will begin to melt.This is a physical change that is affected by light and temperature.Similarly, when a candle is exposed to heat and light, the temperature of the candle increases and the candle will begin to burn.This is a chemical change that is affected by light and temperature, as the burning of the candle creates new substances such as smoke and ash.To learn more about The mass of a melted candle refer to:
https://brainly.com/question/8732641
#SPJ1
A Maillard Reaction occurs when proteins and sugars break down and rearrange themselves into ring-like structures that reflect light. What does this do for foods like cookies, turkeys, and burgers?
The Maillard reaction creates brown pigments in cooked meat in a very specific way: by rearranging amino acids and certain simple sugars, which then arrange themselves in rings and collections of rings that reflect light in such a way as to give the meat a brown color.
The advanced Maillard reaction involves breaking down the Amadori product into a variety of fission products that are composed of the sugar-amino complex. In the ultimate Maillard reaction, amino compounds and sugar fragments condense to form polymerized proteins and brown pigments called melanoidins. In the Maillard reaction, an organic chemical process, reducing sugars and amino acids combine to create a complex brew of chemicals. The distinct flavour and aroma of browned food are the result of this process. The French chemist Louis Camille Maillard's name is associated with the Maillard reaction.
Learn more about amino acids here:
https://brainly.com/question/13266141
#SPJ4
for which principle of relative age is the grand canyon a clear example?
Answer: 1,840 million years old.
Explanation:
The density of ether is 0.714 g/mL. What is the mass of 1.45 L of ether?
The mass of 1.45 L of ether is
4.9 x 10^-7 kg
It is given that
density of ether = 0.714 g/mL
volume of ether = 1.45 L = 1450 ml
We have to find mass of 1.45 L of ether
Density is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume. Density Symbol, D or ρ Density Formula ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.
Density = Mass/Volume
0.714 g/mL = Mass/1450 ml
Mass = 0.00049 gram
Mass = 4.9 x 10^-7 kg
Hence, mass of 1.45 L of ether is
4.9 x 10^-7 kg
Learn more about Density here:
https://brainly.com/question/1354972
#SPJ1
Estimate the minimum detectable concentration of H2O2 if a small amount of catalase (solid) is added to a hydrogen peroxide solution in a calorimeter. Assume that a temperature rise of 2 0. 02oC can be distinguised. You can use a heat capacity of 4. 184 kJ/kg/K for the hydrogen peroxide solution
To estimate the minimum detectable concentration of H2O2, we need to determine the amount of heat released during the reaction between catalase and hydrogen peroxide and compare it with the minimum detectable temperature rise. The reaction between catalase and hydrogen peroxide can be represented as follows:
2H2O2 (aq) + Catalase --> 2H2O (l) + O2 (g)
The amount of heat released during the reaction can be calculated using the equation:
ΔH = - n * ΔH°
Where n is the number of moles of H2O2 and ΔH° is the standard enthalpy of reaction for the reaction between catalase and hydrogen peroxide. The standard enthalpy of reaction can be estimated from the standard enthalpies of formation of the reactants and products.
Since the heat released by the reaction is proportional to the number of moles of H2O2, we can calculate the minimum detectable concentration of H2O2 by dividing the minimum detectable heat release by the heat capacity of the hydrogen peroxide solution and the ΔH°.
Assuming a heat capacity of 4.184 kJ/kg/K for the hydrogen peroxide solution and a temperature rise of 0.02oC, the minimum detectable heat release can be calculated as follows:
ΔQ = mcΔT
Where m is the mass of the hydrogen peroxide solution and c is the heat capacity.
Let's assume the mass of the hydrogen peroxide solution is 100 g. Then, the minimum detectable heat release can be calculated as follows:
ΔQ = (100 g) * (4.184 kJ/kg/K) * (0.02 K) = 0.83 kJ
The minimum detectable concentration of H2O2 can then be calculated as follows:
n = ΔQ / ΔH°
learn more about hydrogen here:
brainly.com/question/28937951
#SPJ4
Suppose that you run a reaction in ethanol to form a very non-polar organic substance. How would you extract your product?
Select one:
a- After the reaction is complete, add water and ethanol to a separatory funnel and separate the layers.
b- After the reaction is complete, rotovap the ethanol and redissolve in suitable organic solvent and water followed by separation.
c- After the reaction is complete, add suitable organic solvent and water followed by separation.
d- There is more than one correct answer.
b- After the reaction is complete, rotovap the ethanol and redissolve in suitable organic solvent and water followed by separation . This is the correct option.
If the desired product is a non-polar organic substance and it is formed in a reaction run in ethanol, one way to extract the product would be to use liquid-liquid extraction method. The basic idea of this method is to use a solvent that is immiscible (i.e., does not mix well) with both the reaction mixture and the desired product.
Here are the general steps for a liquid-liquid extraction:
• Separate the reaction mixture into two layers, the aqueous layer and the organic layer, by using a separating funnel.
• Remove the aqueous layer and discard it.
• Take the organic layer, containing the desired product and ethanol and add a non-polar solvent, such as pentane, hexane, or diethyl ether to the organic layer.
• Shake the mixture vigorously to allow for the transfer of the desired product from the ethanol to the non-polar solvent.
• Separate the two layers by using a separating funnel.
• Remove the upper non-polar solvent layer, which should contain the desired product
• Dry the non-polar solvent layer if necessary, and evaporate the solvent if desired to isolate the pure product.
Note that the choice of the solvent and the specific steps may vary depending on the nature of the product and the reaction mixture.
learn more about ethanol here:
https://brainly.com/question/29294678
#SPJ4
If a sample of metal has a
mass of 45.9g and occupies
a volume of 17.0 mL. What
is the metal if:
Copper-8.96 g/cm³
Aluminum = 2.70 g/cm³
Iron = 7.86 g/cm³
The identity of the metal that has a mass of 45.9g and volume or 17.0mL is aluminium (2.7g/mL) (option B).
How to calculate density?Density is the measure of the mass of matter contained by a unit volume. The density of a substance can be calculated using the following formula;
Density = mass ÷ volume
According to this question, if a sample of metal has a mass of 45.9g and occupies a volume of 17.0 mL, the density can be calculated as follows:
Density = 45.9g ÷ 17.0mL
Density = 2.7g/mL
Therefore, the identity of the metal is aluminium with a density of 2.7g/mL.
Learn more about density at: https://brainly.com/question/6107689
#SPJ1
PARTICULATES in the air, including ---(1)---, from DIESEL
ENGINES and DUST causes ---(2)--- problems in humans
PARTICULATES in the air, including particulate matter, from DIESEL
ENGINES and DUST cause respiratory and cardiovascular health problems in humans
What is particulate matter(PM)?This refers to solid particles and liquid droplets found in the air. PM can be gotten from many places. In general, any type of burning or dust-generating activities are sources of PM. Some examples are Emissions (from vehicles and industrial plant smokestacks) etc.
We have two categories of particulate matter: primary and secondary particulate matter.
Primary particulate matter is emitted directly from:
construction sites wildfires wood burning gravel pitsagricultural activities dusty roads.Secondary particulate matter is formed in the atmosphere as a result of complex chemical reactions.
Learn more about particulate matter on
https://brainly.com/question/15230454
#SPJ1
In a compound, which type of bond is the sharing of electrons between adjacent atoms?
Covalent bonds are what occur when nearby atoms share electrons inside a molecule. Atoms share electrons in a covalent connection in order to reach their highest energy level.
Covalent bonds are also referred to as the valence shell because they have the right amount of electrons for a stable noble gas arrangement. Atoms can attain a more stable electron configuration and create a chemical bond because to this sharing of electrons.
The strength of the bond and the characteristics of the compound are determined by the amount of electrons shared, which is dependent on the number of electrons required to fill the valence shells of the atoms involved.
However, certain metal atoms may also create covalent bonds with non-metal atoms. Covalent bonds are commonly formed between non-metal elements. It is significant to remember that there are other types of bonds besides covalent ones, including ionic and metallic bonds.
learn more about Atoms here:
https://brainly.com/question/1566330
#SPJ4
Question 1: How many molecules are there in 67g of CO2?
Question2: What is the mass of 3.01 x 1023 atoms of FeO? Round to two decimal places.
Question3: If a sample contained 9.65 x 1023 atoms of iodine, how many grams would this be? Round to one decimal point.
1. The number of molecules in 67g of CO2 can be calculated using the molar mass of CO2, which is 44.01 g/mol. To find the number of molecules, we divide the mass of CO2 (67g) by the molar mass of CO2 (44.01 g/mol). This gives us: 67g / 44.01 g/mol = 1.52 x 10^23 molecules of CO2.
2. The mass of 3.01 x 10^23 atoms of FeO can be calculated using the molar mass of FeO, which is 71.847 g/mol. To find the mass, we multiply the number of atoms (3.01 x 10^23) by the molar mass of FeO (71.847 g/mol). This gives us: 3.01 x 10^23 atoms * 71.847 g/mol = 217.31 g
3. To calculate the mass of 9.65 x 10^23 atoms of iodine, we can use the molar mass of iodine, which is 126.904 g/mol. To find the mass, we multiply the number of atoms (9.65 x 10^23) by the molar mass of iodine (126.904 g/mol). This gives us: 9.65 x 10^23 atoms * 126.904 g/mol = 1218.56 g rounded to one decimal point.
"A daisy is a non-flowering, seed-bearing plant, while a pine tree produces flowers. Both the daisy and the pine tree go through the four major stages of the life cycle, which includes the seed stage, sprouting stage, seedling stage, and the final stage, which is the adult stage. During each stage of the life cycle, the two plants have different shapes and textures. As adult plants, the daisy produces seeds in the cone, and the pine tree produces seeds in the flower."
What statement corrects the errors in Zander's passage? a .A daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone. b.As adult plants, the daisy sprouts seedlings, which are then reproduced. During the adult stage, the pine tree grows spores, which are reproduced. che daisy and the pine tree have different stages in their life cycles. The daisy completes the seedling stage before the sprouting stage. The pine tree has a fertilization stage when seeds are produced. d. The daisy and the pine tree both have the same life cycles, but the daisy produces seeds in the seedling stage, and the pine tree produces seeds in the sprouting stage
A daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone. So, the correct option is (A).
What are Cones in plants?Cones are also called strobilus. It is oval in shape, containing the reproductive organs of some non-flowering plants. Cones have unique feature of pines and other conifers, also found on all gymnosperms, some club mosses and horsetails.
Male cones produce pollen that is carried by the wind to female cones, after which the female gametes are fertilized by male gametes from the pollen, the female cones produce seeds, which are then scattered away from the plant by wind or animals.
Thus, a daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone. So, the correct option is (A).
Learn more about Cones, here:
https://brainly.com/question/28830457
#SPJ1
Help me out please :)
Answer:
The strength of the forces holding the particles of a substance together determines its physical state at a given temperature. The stronger the forces the more energy required to overcome them and hence the particles remain in a fixed position and the substance is solid, while weaker forces may allow the particles to move freely making the substance a gas.
Explanation:
In the case of carbon dioxide (CO2), the particles are held together by weak van der Waals forces. These forces are not strong enough to keep the particles in a fixed position, so they are able to move freely and take on the properties of a gas at room temperature.
In the case of water (H2O), the particles are held together by hydrogen bonds. These bonds are stronger than the van der Waals forces in CO2, so the particles are not able to move as freely. As a result, water takes on the properties of a liquid at room temperature.
Salt (NaCl) is made up of positively charged sodium ions (Na+) and negatively charged chloride ions (Cl-). These ions are held together by strong ionic bonds, which keep the particles in a fixed position. As a result, salt takes on the properties of a solid at room temperature.
CARBOHYDRATES WORKSHOP
Cx(H2O)y is the general formula for carbohydrates. Carbohydrates are the carbon hydrate in its natural form.
Which of the three carbohydrate structures are they?Three subtypes of carbohydrates—monosaccharides, disaccharides, and polysaccharides—are recognized in the literature.Cx(H2O)y is the general formula for carbohydrates. Carbohydrates are the carbon hydrate in its natural form. In the same ratio as water, they are composed of hydrogen and oxygen. It should be noted that not all carbohydrates follow the rule Cx(H2O)y. For instance, 2-deoxyribose C5H10O4 does not follow the rule.The four main categories of carbohydrates are monosaccharides, disaccharides, oligosaccharides, and polysaccharides, depending on the degree of polymerization.Only molecules of carbon, hydrogen, and oxygen make up the organic compounds known as carbohydrates.To learn more about carbohydrates refer to:
https://brainly.com/question/15902635
#SPJ1
What is the formula for this ionic crystal ?
Answer:
ZnS
Explanation:
Because there are two tetrahedral holes per anion (sulfide ion) and one-half of these holes are occupied by zinc ions, there must be 1 2 1 2 × 2, or 1, zinc ion per sulfide ion. Thus, the formula is ZnS. Check Your Learning
How many grams of aluminum can be recovered from a 34. 5 g sample of Al2O3?
18.26 grams of aluminum can be recovered from a 34. 5 g sample of Al2O3.
Al is the chemical element's symbol, and its atomic number is 13. Aluminum has a density that is around one third that of steel, which is lower than that of most common metals. It has a strong affinity for oxygen, and when exposed to air, creates a protective oxide coating on the surface. Aluminum visually resembles silver due to similarities in colour and light-reflecting properties.
2Al2O3 → 2Al + 3O2
Al2O3 has a molecular weight of 102.
Al's atomic weight is 27.
We may write from the stoichiometric equation:
It is possible to recover 54 g of Al from 102 g of Al2O3.
So, 18.26 g of Al may be recovered from 34.5 g of Al2O3 (54/102).
There fore 18.26 g of aluminium is recovered.
learn more about Aluminum Refer:brainly.com/question/19761029
#SPJ4
if 13.90 ml of 0.695 m koh is required to titrate the unknown acid to the equivalence point, what is the concentration of the unknown acid?
The concentration of the unknown acid is calculated to be 9.6605/ volume of the unknown acid
The following formula can be used to calculate the concentration of the unknown acid;
as we know moles is concentration multiply by volume
so,
C₁V₁ = n₁
C₂V₂ = n₂
Where C is concentration v is volume and n is moles. C₁V₁ is unknown acid and C₂V₂ is KOH
At the equivalence point;
n₁ =n₂
Therefore;
C₁V₁ = C₂V₁
Assuming that the volume of KOH is 13.90 ml and that (concentration of the unknown acid) = 0.695 M
Therefore, C₁ or concentration of unknown acid can be calculated as follows;
C₁V₁ = C₂V₂
C₁ = C₂V₂ / V₁
C₁ = 0.695 x 13.90 / V₁
Ca = 9.6605 / V₁
Learn more about concentration https://brainly.com/question/13024825
#SPJ4
At stp, one mole of oxygen gas (o2) and one mole of neon (ne) contain:_____.
At stp one mole of oxygen gas and one mole of neon atom both have
6* [tex]10^2^3[/tex] molcules which is avagardo number of molecules.
what is STP?STP stands for "Standard Temperature and Pressure." In chemistry, it is commonly used as a reference point to describe the properties of gases. STP is defined as a temperature of 0 degrees Celsius (273.15 K) and a pressure of 1 atmosphere (101.325 kPa). At these conditions, the volume of one mole of any gas is 24.45 L.
So one mole of all gas have avagadro number of molecules in it.
To know more about avagardo number click on the link given below:
https://brainly.com/question/29964498#
#SPJ4