Scott travels north 2 miles and then goes west 5 miles before coming straight back south 7 miles what is his displacement

Answer:

Distance 5 km, Displacement 3 km east

Explanation:

The distance covered by Anthony is 5 km, while his displacement is 3 km.

The distance is defined as the total length of space covered during motion between the starting point and end point, not necessarily a straight line. Whereas displacement is defined as the minimum distance between two points in space, that is a straight line.

Suppose, if you start from one point and walk for 100 meters then come back at the same point that you started your walk, you would have traveled 2 times 100 meters that is 200 meters. But your displacement will be zero because your starting point and the end point are the same.

The given question clarifies the difference between distance and displacement:

Since Anthony walks 4 km east and then walks 1 km west, the distance covered by him is:

distance = 4 + 1 = 5 km

but as he walks west, he comes closer to the starting point, and his displacement is the distance between the starting point and the end point.

displacement = 4 - 1 = 3 km

Referto the figure below for more information.

Learn more about distance and displacement:

https://brainly.com/question/24522401?referrer=searchResults

Answer: the work done by the force is 0

Explanation:

F (x², xy)

121 = 11²

so R = x² + y² = 11²

p = x². Q = xy

Δp/Δy = 0, ΔQ/Δx

using Green's theorem

woek = c_∫F.Δr = R_∫∫ ΔQ/Δx - Δp/Δy) ΔA

=  (x² + y² = 121)_∫∫ yΔA

now let x = rcosФ, y = rsinФ

ΔA = rΔrΔФ

so r from 0 to 11

and Ф from 0 to 2π

= 0_∫^2π   0_∫^11  rsinФ × rΔrΔФ

= 0_∫^2π SinФΔФ   0_∫^11  r²Δr

= [ -cosФ]^2π_0 [r³/3]₀¹¹ = ( -cos2π + cos0) (11³/3) = 0

therefore the work done by the force is 0

Answer:

44M 64M

Explanation:

Answer:

B

Explanation:

A normal heart rate is from 85-95% the other heart rate is not normal because your heart is beating more than normal

Answer: P1V1 = P2V2

Explanation:

Answer:

No you didn't win the stuffed poodle

Explanation:

From the question we are told that

    The distance of the ramp to the hole is  d =  3 m \

     The angle of inclination is  [tex]\theta  =  10^o[/tex]

       The coefficient of static friction is [tex]\mu_s = 0.1[/tex]

     The coefficient of kinetic  friction is [tex]\mu_k = 0.08[/tex]

      The mass of the puck is  m  =  1 kg

     The velocity of the first slide  is  [tex]v_1  =  2.0 m/s[/tex]

Generally the kinetic energy at the bottom of the ramp  is equal the energy loss due to friction and this can be mathematically represented as

    [tex]\frac{1}{2} m *  v^  2 =  \mu_k * [m *  g] *  cos (theta )  *  d[/tex]

=>     [tex]\frac{1}{2}  *  v^  2 = 0.08 * 9.8 *  cos (10 )  *  3[/tex]

=>     [tex] v=  2.17 \  m/s [/tex]

Comparing the relative velocity obtained and the velocity of your first throw we can see that you didn't win the stuffed animal  

Answer:

The boat has more buoyancy

Explanation:

Answer:

III) [tex]d_{1}+ d_{2}=d_{t}[/tex]

Explanation:

I) coordinate (0,5) is the head for [tex]d_{1}[/tex] I will put the tail coordinate as (0,0) but it could be any other number in the x just not in the 5  with the the y being any other value.

II) coordinate (5,5) is the head for [tex]d_{2}[/tex] the tail needs to be in the head of [tex]d_{1}[/tex] being (0,5)

III) coordinates for [tex]d_{t}[/tex] is connecting the tail from [tex]d_{1}[/tex] and the head of [tex]d_{2}[/tex] making it (0,0)[tex](tail)[/tex] and (0,5)[tex](head)[/tex] and is written as [tex]d_{1}+ d_{2}=d_{t}[/tex]

(i) using coordinate grid notation to represent d₁, d₁ = 5y

(ii) using coordinate grid notation  to represent d₂, d₂ = 5x + 5y

(ii) The sum of d₁ and d₂ is written as 5x + 10y

In order to show the horizontal direction of a vector, we will place x after the magnitude of the vector.

Also, to show the vertical direction of a vector, we will place a y after the magnitude of the vector.

(i) Using coordinate grid to represent d₁ = (0, 5)

[tex]d_1 = 0(x) + 5(y)\\\\d_1 = 5y[/tex]

(ii) Using coordinate grid to represent d₂ = (5, 5)

[tex]d_2 = 5x + 5y[/tex]

(iii) The total vector is written as;

[tex]d_1 + d_2 = 5y + (5x + 5y)\\\\d_1 + d_2 = 5y + 5x + 5y\\\\d_1 + d_2 = 5x + 10y[/tex]

Learn more here: https://brainly.com/question/17212749

Answer:

option (i) is correct

Explanation:

as there is no air resistance, no force is acting on the object horizontally, but gravitational acceleration will obviously act, regardless of the air resistance... option (i) is correct

Answer:

Package 1 will land at 228.0 m, package 2 will land at 308.0 m, and the distance between them is 80.0 m.

Explanation:

To find the distance at which the first package will land we need to calculate the time:

[tex] Y_{f} = Y_{0} + V_{0y}t - \frac{1}{2}gt^{2} [/tex]

Where:

Y(f) is the final position = 0

Y(0) is the initial position = 160 m

V(0y) is initial speed in "y" direction = 0

g is the gravity = 9.81 m/s²

t is the time=?                                          

[tex] 0 = 160 m + 0t - \frac{1}{2}9.81 m/s^{2}t^{2} [/tex]

[tex] t = \sqrt{\frac{2*160 m}{9.81 m/s^{2}}} = 5.7 s [/tex]

Now we can find the distance of the first package:

[tex] X_{1} = V_{0x}*t = 40.0 m/s*5.7 s = 228.0 m [/tex]

Then, after 2 seconds the distance traveled by plane is (from the initial position):

[tex] X_{p} = V_{0x}*t = 40.0 m/s*2 s = 80.0 m [/tex]

Now, the distance of the second package is:

[tex] X _{2} = X_{1} + X_{p} = 228.0 m + 80.0 m = 308.0 m [/tex]

The distance between the packages is:

[tex] X = X_{2} - X_{1} = 308.0 - 228.0 m = 80.0 m [/tex]

Therefore, package 1 will land at 228.0 m, package 2 will land at 308.0 m and the distance between them is 80.0 m.

I hope it helps you!

The final displacement of the duck would be 11.18 meters in NW, therefore the correct answer is option B.

Displacement describes this shift in location.

As given in the problem Donald Duck Matthews wanted to show up all his friends with the newfound dancing skills he left his house to go to dressers house 20 m north from where he was he's so dresser his moves went off to the next place and next stop was 10 m west at choirboys house luckily he saw Eddie there too.

After showing off his skills again he was satisfied, but he still had to show one last person up. His brother was 15 m South.

His final position would be 5 meters north and 10 meters west.

The displacement of the Duck = √( 10² + 5²)

                                                   = 11.18 meters in NW

Thus, the final displacement of the duck would be 11.18 meters in NW.

To learn more about displacement here, refer to the link;

brainly.com/question/10919017

#SPJ2

Answer: (a) B = 2 x 10⁻⁵T

               (b) B = 1.94 x 10⁻⁵T

               (c) B = 1.8 x 10⁻⁴T

Explanation: A magnetic field due to a current passing through a straight wire is calculated using the Biot-Savart Law:

[tex]dB=\frac{\mu_{0}}{4.\pi} \frac{IdLXR}{r^{3}}[/tex]

where

dL is current length element

[tex]\mu_{0}[/tex] is permeability of free space ([tex]4.\pi.10^{-7}[/tex]T.m/A)

(a) For a infinite straight wire:

[tex]B=\frac{\mu_{0}I}{2.\pi.R}[/tex]

[tex]B=\frac{4.\pi.10^{-7}.2}{2.\pi.2.10^{-2}}[/tex]

B = 2x10⁻⁵T

For an infinite, long and straight wire, magnetic field is 2x10⁻⁵T.

(b) For a finite wire:

[tex]B=\frac{\mu_{0}I}{2.\pi.R}\frac{L}{\sqrt{L^{2}+R^{2}} }[/tex]

[tex]B=\frac{4.\pi.10^{-7}.2}{2.\pi.2.10^{-2}} \frac{8.10^{-2}}{\sqrt{(8.10^{-2})^{2}+(2.10^{-2})^{2}} }[/tex]

B = 1.94x10⁻⁵T

The magnetic field for a finite wire in the same conditionsas infinite wire is 1.94x10⁻⁵T.

(c) For a finite wire at a point distant from the end of the wire:

[tex]B=\frac{\mu_{0}I}{4.\pi.L\sqrt{2} }[/tex]

[tex]B=\frac{4.\pi.10^{-7}.2}{4.\pi.8.10^{-2}\sqrt{2} }[/tex]

B = 0.18x10⁻⁵T

At a point at the end, magnetic field is 1.8x10⁻⁴T.

Answer:

Parietal Lobe

Explanation:

Answer:

D

Explanation:

Because first phase thr it will follow the law of thermodynamics as it will reach the equilibrium point then decrrases afterwards

Answer:

A) By applying a known force, and measuring it's acceleration.

Explanation:

This is actually something that astronauts do in space as a mathmatical exercise when calculating the mass of an object since F = m × a.

Once the force, and acceleration are applied, the only unknown is the mass which can be solved by dividing force over acceleration. This is because inertial mass is equal to gravitational mass.

Answer:

2.83kg

Explanation:

Answer:

2.83kg

Explanation:

Given

initial density = 1.18 kg/m3

Final density in the tank = 4.95 kg/m3.

Let us write the mass balance first.

Change in the mass of the system=mass of the air entering the system - Mass of air out the system

Mass that entered= M2 - M1

But DENSITY= MASS/ VOLUME

Mass= volume × Density

We can expressed the mass in terms of density since density is given in the question.

Mass that entered= (volume × density)2 - ( volume × density)1

= (V ρ)2 - (V ρ)1

But V1= V2 the volume remains the same

= ( ρ2 - ρ1)v

= (4.95 kg/m3 - 1.18 kg/m3) 0.75 m3

= 3.77× 0.75

= 2.8275kg

Mass that entered= 2.83kg

therefore, mass of air that has entered the tank= 2.83kg

Answer:

Explanation:

Accuracy can be said to mean the degree to which the particular result of a measurement, or calculation, and even possibly specification agrees or is the same with respect to the correct value or an established standard. Succinctly put, it's is how close a value is to the actual value it ought to be.

Precision on the other hand, is a change in a measurement, or calculation, and even as far as specification, much especially as represented by the number of digits that has been established. In other words, it is the proximity of two or more measurements with respect to one another.

Reproducibility occurs when a measurement(for example) is made by another person, or a different instrument is used. Yet, the same values are obtained.

They are very important in design because they account for very important part of an experiment. Neglecting these quantities means exposing an instrument to unknown danger to the factory and even the personnels.

Also, neglect in taking note of accuracy, precision and reproducibility can lead to poor data processing and even human errors.

Now, vote brainliest, will you? :)

Answer:b the arrows push against the bow string

Explanation:

The reaction force will be  Arrow's push against the bowstring.

Option b is correct.

From Newton's Third Law of  Action & Reaction, It  states that for every action  in nature there is an equal and opposite reaction.

Therefore, If an  archer shoots an arrow. The action force is the bowstring against the arrow, The reaction force will be  Arrow's push against the bowstring

Learn more:

https://brainly.com/question/19218753

Answer:

Option iv

Explanation:

The acceleration due to gravity (g) of the earth is constant (i.e 9.81 ms¯²). As long as the stone remains within the earth, the acceleration due to gravity experienced by the stone will be 9.81 ms¯².

The maximum height reached by an object is the height where the object no longer have velocity to move further hence it begins to fall back. At this point (i.e at the maximum height), the velocity of the object is zero.

Summary:

At maximum height:

Acceleration due to gravity of the stone = 9.81 ms¯²

Velocity = 0

Thus, option iv gives the correct answer.

Answer:

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) E=0

Explanation:

Let's analyze the situation when a negative charge is placed inside the cavity, it repels the other negative charges, leaving the necessary positive charges to compensate for the -Q charge. The electrons that migrated to the outer part of the sphere, as it is connected to the ground, can pass to the earth and remain on the planet; therefore on the outside of the sphere the net charge remains zero.

With this analysis we can answer the specific questions

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) If we create a Gaussian surface on the outside of the sphere the net charge on the inside of this sphere is zero, therefore there is no electric field, on the outside

d) If it is very reasonable and this system configuration is called a Faraday Cage

e) We cannot apply this principle to gravity since there are no particles that repel, in all cases the attractive forces.

Answer:

Plasma, which constitutes 55% of blood fluid, is mostly water (92% by volume), and contains proteins, glucose, mineral ions, hormones, carbon dioxide (plasma being the main medium for excretory product transportation), and blood cells themselves.

Explanation:

Capillary motion is crucial for circulating water. Your body's cells would not hydrate without this flow, and crucial communication between your brain and body would slack off, hence blood contains water 92% water helps in capillary action.

Capillary action, also known as capillary effect or motion, is the process by which liquid moves through constricted areas without the aid of external forces like gravity but rather with the help of intermolecular forces that exist between the liquid and solid surface (s).

Adhesion: The attraction of two different molecules, such as the hydrogen and oxygen molecules found in water and plastic drinking straws.

Proteins, glucose, mineral ions, hormones, carbon dioxide (plasma is the principal medium for excretory product transfer), and blood cells themselves are contained in plasma, which makes up 55% of blood fluid. Plasma is mostly water (92% by volume) and contains water as well as several other substances.

Therefore, the water contains in the blood helps in capillary action.

To know more about Capillary action:

https://brainly.com/question/13228277

#SPJ2

Answer:

T₂ = 49.3°C

Explanation:

Applying law of conservation of energy to the system we get the following equation:

Energy Supplied by Resistor = Energy Absorbed by Tank + Energy Absorbed by Water

E = mC(T₂ - T₁) + m'C'(T'₂ - T'₁)

where,

E = Energy Supplied by Resistor = 100 KJ = 100000 J

m = mass of copper tank = 13 kg

C = Specific Heat of Copper = 385 J/kg.°C

T₂ = Final Temperature of Copper Tank

T₁ = Initial Temperature of Copper Tank = 27°C

T'₂ = Final Temperature of Water

T'₁ = Initial Temperature of Water = 50°C

m' = Mass of Water = 4 kg

C' = Specific Heat of Water = 4179.6 K/kg.°C

Since, the system will come to equilibrium finally. Therefor:  T'₂ = T₂

Therefore,

(100000 J) = (13 kg)(385 J/kg.°C)(T₂ - 27°C) + (4 kg)(4179.6 J/kg.°C)(T₂ - 50°C)

100000 J = (5005 J/°C)T₂ - 135135 J + (16718.4 J/°C)T₂ - 835920 J

100000 J + 135135 J + 835920 J = (21723.4 J/°C)T₂

(1071055 J)/(21723.4 J/°C) = T₂

T₂ = 49.3°C

Answer:

2.59 cm

Explanation:

The torque τ on a current carrying loop of wire is given by τ = NiABsinθ where N = number of turns of loop, i = current in loop, A = area of loop and B = magnetic field.

Now, given that τ = 0.0256 Nm, i = 1.10 A, B = 1.20 T,N = 30 and since the loop is tilted 15° off the x-axis and the magnetic field points in the negative y- direction, the angle between the normal to the loop and the magnetic field is thus 90° - 15° = 75°. So, θ = 75°.

We now find the area of the loop A from

τ = NiABsinθ

A = τ/NiBsinθ

substituting the values of the variables, we have

A = 0.0256 Nm/30 × 1.10 A × 1.20 T × sin75°

A = 0.0256 Nm/38.25

A = 6.69 × 10⁻⁴ m²

Since the loop is a square, with length of side L, its area A = L² and

L = √A

= √(6.69 × 10⁻⁴ m²)

= 2.59 × 10⁻² m

converting to cm, we have

L = 2.59 × 10⁻² m × 100 cm/m

L = 2.59 cm

So, the lengths of sides of the loop is 2.59 cm

Answer:

when the electron transferred permanently to another atom

Answer:

1800 m/s

Explanation:

The equation is v = fλ

λ= 0.75

f = 2400 Hz

V = 2400 × 0.75

V = 1800 m/s

[ you did not give units for wavelength, I assumed it would be m/s]