Answer:
The Universe will continue to expand :)
Explanation:
Dark matter reverses the effect of gravity in some cases, and the Doppler effect also supports this claim, in which it states that the later the star has formed, the farther away it will be from the center/origin point of our universe.
Hope this helps! Mark me brainliest :)
Determine the number of moles in 3.50 x 1023
formula units of BaCl2
Answer:
0.58 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{3.5 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{3.5}{6.02} \\ = 0.581395[/tex]
We have the final answer as
0.58 molesHope this helps you
#1. Boyle's Law. A gas with a volume of 4.0 L at a pressure of 205 kPa is allowed to expand to a volume of 12.0 L.
What is the pressure in the container if the temperature remains constant? (Answer is 6.8 kPa).
I NEED TO FIND HOW YOU GET TO THAT ANSWER
The final pressure in the container if the temperature remains constant is 68.3 kPa.
Given the following data;
Initial volume, V1 = 4.0 liters Initial pressure, P1 = 205 kPa Final volume, V2 = 12.0 LitersTo find the final pressure in the container if the temperature remains constant, we would use Boyle's Law:
Mathematically, Boyle's law is given by the formula;
[tex]P_1V_1 = P_2V_2[/tex]
Where;
P1 is the original (initial) pressure. P2 is the final pressure.V1 is the original (initial) volume. V2 is the final volume.Substituting the values into the formula, we have;
[tex]205[/tex] × [tex]4 =[/tex] [tex]12P_2[/tex]
[tex]820 = 12P_2\\\\P_2 = \frac{820}{12}[/tex]
Final pressure, P2 = 68.3 kPa
Therefore, the final pressure in the container if the temperature remains constant is 68.3 kPa.
Read more: https://brainly.com/question/23882998
What is the law of conservation of energy and how do we know this is true?
Answer:The law of conservation of energy states that energy can neither be created nor destroyed - only converted from one form of energy to another. This means that a system always has the same amount of energy, unless it's added from the outside. ... The only way to use energy is to transform energy from one form to another.
Answer:
law of conservation of energy is energy cannot be created or destroyed but can be transformed from one form to another
it is true as potential energy can be converted into kinetic energy
Look at diagram 1 above. What type of eclipse is shown based on the alignment of the Earth, Sun, and Moon?
Solar eclipse
Lunar eclipse
What is the goal of the metric system
Answer:
One goal of the metric system is to have a single unit for any physical quantity; a second important goal is to minimize the use of conversion factors when making calculations with physical quantities.
Explanation:
Hope this helps.
4
Select the correct answer.
Which statement best describes how chemical equations demonstrate conservation of mass?
O A.
The number of reactants is the same as the number of products.
O B.
The compounds are the same on each side of the reaction.
O c.
The number of atoms of each element is the same on each side of the equation.
OD.
The state of matter is the same on each side of the equation.
Answer:
C. The number of atoms of each element is the same on each side of the equation.
Explanation:
[tex].[/tex]
How many kilograms of nitrogen are present in a 3.50 L sample of N2O
There are 2.72 kilograms of nitrogen present in a 3.50 L sample of N₂O.
To find the mass of nitrogen in N₂O, we must calculate the number of moles of N₂O.
[tex] n_{N_{2}O} = \frac{m_{N_{2}O}}{M{N_{2}O}} [/tex] (1)
Where:
[tex] m_{N_{2}O}[/tex]: is the mass of N₂O
[tex]M_{N_{2}O}[/tex]: is the molar mass of N₂O = 44.013 g/mol
The mass of N₂O can be founded from the density:
[tex] d = \frac{m}{V} [/tex] (2)
Where:
d: is the density of N₂O = 1.22 g/mL
V: is the volume = 3.50 L = 3500 mL
Then, the mass of N₂O is (eq 2):
[tex] m = d*V = 1.22 g/mL*3500 mL = 4270 g [/tex]
Now, the number of moles of N₂O is (eq 1):
[tex] n_{N_{2}O} = \frac{4270 g}{44.013 g/mol} = 97.02 \:moles [/tex]
Knowing that in 1 mol of N₂O we have 2 moles of N, the number of moles of nitrogen is:
[tex] n_{N} = \frac{2\: moles \: N}{1 \:mol \: N_{2}O}*n_{N_{2}O} = \frac{2\: moles \: N}{1 \:mol \: N_{2}O}*97.02 \:moles \:N_{2}O = 194.04 \: moles [/tex]
Finally, with the number of moles of N we can find its mass:
[tex] m = n_{N}*M_{N} = 194.04 \:moles*14.007 g/mol = 2717.9 g = 2.72 kg [/tex]
Therefore, there are 2.72 kilograms of nitrogen.
Find more about the number of moles here:
https://brainly.com/question/10165629?referrer=searchResults
I hope it helps you!
calculate the boiling point elevation for solution of 25.0 grams of menthol in 130 grams of ethanol. Ethanol boiling point elevation constant is 1.22 oC/m
Answer:
Explanation:
When a solute is added to a solvent, the vapor pressure of the solvent (above the resulting solution) is less than the vapor pressure above the pure solvent. The boiling point of a solution, then, will be greater than the boiling point of the pure solvent because the solution (which has a lower vapor pressure) will need to be heated to a higher temperature in order for the vapor pressure to become equal to the external pressure (i.e., the boiling point).
The boiling point of the solvent above a solution changes as the concentration of the solute in the solution changes (but it does not depend on the identity of either the solvent or the solute(s) particles (kind, size or charge) in the solution).
I cant give you the answer but I hope this helps.
2567 milliliters to liters
Answer:
2.567 litres
Explanation:
I dont have a proper explanation sorry
which of the following oxides will react with magnesium most readily when both are heated?
A.zinc oxide
B. copper(2) oxide
C.lead (2) oxide
D. aluminum oxide
Answer:
None of the above
Explanation:
• This is because all the metal oxides provided are below magnesium in the reactivity series.
[ pic attached ]
[tex].[/tex]
When floating a ping-pong ball with a hairdryer, which two forces are balanced?
Answer:
The ping-pong ball will fly up with the air from the hair dryer until it reaches a point of balance – this is where the force of gravity (which pushes the ping-pong ball down) is equal to the force of the air (which is pushing the ping-pong ball up) hop it helps:)
What quantity is needed to convert between the moles of a
given sample of a substance and its mass in grams?
a the molar mass of the substance
b the density of the substance
C the physical state of the substance
ht?
d all of the above
Answer:
d
Explanation:
thanks so much to you welcomeeee for me and my brother in the same situation and he does it for a year of life in your relationship
PLEASE HELP ME WITH THIS I ONLY HAVE 8 MINUTES I will give you extra points . NUMBER 6
Answer:
3 mass instincts. If you look at the scale you can they evenly sometimes line up with a line. Whenever a huge instinct occurred the lines were really high, but whenever they were little instincts on the scale the lines would go down
Explanation:
Find the sum of the
following:
89.001 + 0.0001 + 348.4 +
49166
Answer: 49,603.4011
Explanation:
Answer:
49603.4011
Explanation:
89.001
+. 0.0001
348.4
49166
answer: 49603.4011
37. A patient had pale tinger nail, shortness of breath and felt dizzy. The patient is most likely suffering from A. Kwashiorkor B. Marasmus C. Anaemia D. Rickets
Answer:
Anaemia
Explanation:
Symptoms: fatigue, skin pallor, shortness of breath, lightheadedness, dizziness, or a fast heartbeat.
What is the quantum mechanical electron configuration of arsenic?
Answer:
After the 4s sublevel is filled with two electrons, ten electrons fill the 3d sublevel, which is slightly higher in energy than the 4s sublevel. After the 3d sublevel is filled, the remaining three electrons will be in orbitals in the 4p sublevel. Thus, the electron configuration for arsenic is [Ar] 4s(2 squared) 3d(10 squared) 4p(3 squared).
Which of these correctly describes the layer of Earth that has the highest temperatures?
The crust is the hottest because it is closest to the Sun.
The mantle is the hottest because it is the thickest layer.
The outer core is the hottest because it is composed of liquid rock.
The inner core is the hottest because it is under the most pressure.
Please English
Thank you:)
Answer:
The inner core is the hottest because it is under the most pressure.
Explanation:
brainliest please. . .
Question 1 of 5
A specific nitrogen atom has 7 protons and 6 neutrons. If this is a neutral
atom, how many electrons does the atom have?
A. 7
B. 13
C. 14
D. 6
SUBMI
Answer:
A.7
Explanation:
because proton equals to electron in neutral
Which of the following atoms would be expected to be diamagnetic in the ground state?
O magnesium (Mg)
O potassiun (K)
O chlorine (CI)
O cobalt (Co)
The atoms that would be expected to be diamagnetic in the ground state is magnesium
The magnetism of an atom refers to its electronic configuration. A diamagnetic atom is an atom whose electrons are all paired.
A paired electron is an electron that occurs in pairs in its orbital shell.
At their respective ground state, the electronic configuration of the given elements are as follows:
The electronic configuration of magnesium is 1s²2s²2p⁶3s². As such its a diamagnetic atom.
The electronic configuration of Potassium is 1s²2s²2p⁶3s²3p⁶4s¹. Hence, Potassium has one unpaired electron in its outermost shell.
The electronic configuration of Chlorine is 1s²2s²2p⁶3s²3p⁵. Hence, Chlorine has one unpaired electron in its outermost shell.
The electronic configuration of Cobalt is 1s²2s²2p⁶3s²3p⁶3d⁷4s². Hence, the unpaired electrons of Cobalt in its outermost shell are three.
Therefore, the atoms that are diamagnetic in the ground state is magnesium.
Learn more about diamagnetic atoms here:
https://brainly.com/question/18865305?referrer=searchResults
Gaseous butano (CH,(CH),CH) will react with gaseous oxygen (0) to produce gaseous carbon dioxide (CO2) and goseous woter (11,0). suppose
20.9 g of butane is mixed with 54, 9 of oxypen. Calculate the minimum mass of butone that could be left over by the chemical reaction. Be sure your answer
has the correct number of significant digits.
Answer:
Firstly, We have to convert it in the Miles formula...
No. of moles = Mass given/Molar Mass
So, the final answer be come
Ans - 50.8 gm and there same % is 50.8% butane in reactionThe mass of 2.50 moles of calcium fluoride (CaF2) is how many
grams.
Answer:
195.199 grams
what is a compound substance
Answer:
A compound is a substance that contains atoms of two or more different elements.
Explanation:
Please mark my answer no. 1
15.3 Determine the mass of the following: 15.3.1. 2 mol calcium atoms
15.3.2. 0,3 mol nitrogen molecules
15.3.3. 0,5 mol table salt
15.3.4. 0,2 mol hydrochloric acid
15.3.5. 0,08 mol sodium carbonate (Na2CO3)
15.3.6. 0,25 mol ammonium sulphate (NH4)2SO4
Answer:
hh
Explanation:
Caltrain tablets contains calcium carbonate. If one tablet requires 34.46 mL of 0.291 M solution of hydrochloric acid for neutralization, how many milligrams of calcium carbonate is in this caltrate tablet?
There are 500 mg of calcium carbonate is in this caltrate tablet
The equation of the reaction is;
2HCl(aq) + CaCO3(aq) ------> CaCl2(aq) + CO2(g) + H2O(l)
Next, we have to obtain the amount HCl reacted as follows;
Number of moles = concentration × volume
Volume = 34.46 mL or 0.03446 L
Concentration = 0.291 M
Number of moles = 0.291 M × 0.03446 L
Number of moles = 0.01 moles
Since the reaction of HCl and CaCO3 are in the ratio of 2:1
2 moles of HCl reacts with 1 mole of CaCO3
0.01 moles of HCl reacts with 0.01 moles × 1 mole/2 moles
= 0.005 moles of CaCO3
Mass of CaCO3 = number of moles × molar mass
Mass of CaCO3 = 0.005 moles of CaCO3 × 100 g/mol
Mass of CaCO3 = 0.5 g or 500 mg
Learn more: https://brainly.com/question/9743981
Write the chemical formula for the ionic compound formed by lithium and fluorine.
Answer:
→ LiF
Explanation:
[tex]{ \rm{2Li _{(s)} + F _{2(g)} \dashrightarrow \: 2LiF _{(s)} }}[/tex]
Answer:
[tex]Lithium⟼Li+Fluorine⟼F=LiF[/tex]
A solution made from pure Potassium hydroxide contained 1.85 g of Potassium hydroxide in exactly 200 cm3 of water. Using phenolphthalein indicator, titration of 20.0 cm3 of this solution is carried out v/s sulphuric acid. 9.35 cm3 of sulphuric acid solution is required for complete neutralisation. [atomic masses: K= 39, O = 16, H = 1]
(a) write the equation for the titration reaction.
(b) calculate the molarity of the Potassium hydroxide solution. (c) calculate the moles of Potassium hydroxide neutralised. (d) calculate the moles of sulphuric acid neutralised.
(e) calculate the molarity of the sulphuric acid.
The concentration of H2SO4 is 0.176 M. The number of moles of H2SO4 is 0.0165 moles.
The equation of the reaction is;
2KOH(aq) + H2SO4(aq) ------> K2SO4(aq) + H2O(l)
The number of moles of KOH = 1.85 g/56 g/mol = 0.033 moles
concentration = number of moles /volume
volume = 200 cm3 or 0.2 L
concentration of KOH = 0.033 moles/0.2 L = 0.165 M
From the titration formula;
CAVA/CBVB =na/nb
CA = concentration of acid
VA = volume of acid
CB = concentration of base
VB = volume of base
na = number of moles of acid
nb = number of moles of base
Making CA the subject of formula;
CA = CBVBna/VAnb
CA = ?
CB = 0.165 M
VA = 9.35 cm3
VB = 20.0 cm3
na = 1
nb =2
CA = CBVBna/VAnb
CA = 0.165 M × 20.0 cm3 × 1/9.35 cm3 × 2
CA = 0.176 M
The concentration of sulphuric acid is 0.176 M
From the reaction equation;
2 moles of KOH reacts with 1 mole of H2SO4
0.033 moles of KOH reacts with 0.033 moles × 1 mole/2 moles
= 0.0165 moles of H2SO4
Learn more: https://brainly.com/question/24556237
Given R = 0.0821L⋅atm/mol⋅k, how many moles of gas are in a 1.25 L container at 300K and 2.07 atm?
A. 9.51 mol
B. 0.105 mol
C. 0.084 mol
D. 0.067 mol
Explanation:
Its B) 0.105 enjoy youre day
Zn + O2= ZnO
How many moles of zinc are needed to make 500. g of zinc oxide?
Answer:
5.15 moles
Explanation:
2zn + o2 = 2zno
5.15 2.57 5.15 moles
nzno=500/(16x2+65)= 5.15 moles
-> nzn = 5.15 x 2 ÷ 2 = 5.15 moles
The variable that we change or test in an experiment is called the
A) Dependent variable
B) Independent variable
C) Constant
the variable that we change in an experiment is the Independent Variable. The dependent variable is the outcome and the constant is what remains the same throughout the experiment.
An automatic response of the body that occurs very rapidly and with-out conscious control is called
Answer:
Reflex.
Explanation:
Because it can occur very rapidly and without conscious control.