The 80 kg boat moves 0.694 meter towards the shore, if juliet moves towards the romeo.
The mass of the romeo, m₁ = 85 kg
The mass of the juliet, m₂ = 57 kg
The mass of the boat, m₃ = 80 kg
Distance between romeo and juliet, = 2.70 m
If we take the juliet's initial position as a reference point, X₁ = 0
Centre of mass of the boat, X₂ = 2.7/2 = 1.35 m
Distance of romeo from reference point, X₃ = 2.7
Combined centre of gravity of the whole system,
Xₐ = (85×2.7 + 57×0 + 80×1.35)/(85+57+80)
Xₐ = 1.52
After juliet moves romeo, new center of gravity
Xₙ = ((85+57)×2.7 + 80×1.35)/(85+57+80)
Xₙ = 2.214 m
The distance moved by the boat, d = 2.214 - 1.52
d = 0.694 m
--The given question is incomplete, the complete question is:
"romeo (85.0 kg) entertains juliet (57.0 kg) by playing his guitar from the rear of their boat at rest in still water, 2.70 m away from juliet, who is in the front of the boat. after the serenade, juliet carefully moves to the rear of the boat (away from shore) to plant a kiss on romeo's cheek. How far does the 80 kg bus move towards the shore it is facing?"
To know more about centre of gravity, here
https://brainly.com/question/20384349
#SPJ4
it is a scale which intensifies 10 times over as it increase by a value?
It is not a proper scale to measure which intensifies 10 times over as it increases by value. The scale which have a short and regular intervals are more accurate.
What are measuring scales ?There are various kinds of measuring gadgets which can be used in appropriate occasions. For example in a chemical lab, there are graduated beakers, measuring vessels, electronic balances, burettes, pipettes etc.
Each type of measuring vessels are used in different situations. In all cases, measuring devices with small regular interval of scale is very easy to use and helps for an accurate measurement especially in the case small volume samples.
Therefore, it is not a proper scale which intensifies 10 times over as it increase by a value. We can't take the intermediate values properly with this scale.
Find more on measuring scales:
https://brainly.com/question/17893821
#SPJ1
Small spheres of diameter 1.05 mm fall through 20.0°C water with a terminal speed of 2.34 cm/s. Use 1.00 x 10-3 §a for the viscosity of water. Calculate the density of the spheres.
The density of the small spheres with a diameter of 1.05mm and a terminal velocity of 2.34 cm/s is 42.97m/s³.
What is Density?Density is a measurement which compares the amount of matter occupied by an object with its volume. An object with much matter in a certain amount of volume has high density. Whereas, an object with a little matter in the same amount of volume has a low density.
We know that density of water,
σ = 1.00 × 10⁻³ kg/m³ and coefficient of viscosity for water, η = 10⁻³ Pa.s
Given,
Terminal speed, v = 2.34 cm/s = 0.0234 m/s
Radius of sphere, r = d/2 = 1.05/2 = 0.525mm = 0.0005m
Using the formula of terminal speed,
v = 2(ρ − σ)gr²/ 9η
0.0234 = 2(ρ - 1.00 × 10⁻³) × 9.8 × 0.0005²/ 9 × 10⁻³
0.0234 = 2(ρ - 1.00 × 10⁻³) × 9.8 × 0.00000025/ 9 × 10⁻³
0.0234 = 2(ρ - 1.00 × 10⁻³) × 0.00000245/ 9 × 10⁻³
0.0234 × 9 × 10⁻³/ 2 × 0.00000245 = ρ - 1.00 × 10⁻³
0.2106× 10⁻³/ 0.0000049 = ρ - 1.00 × 10⁻³
0.0002106/ 0.0000049 = ρ - 1.00 × 10⁻³
42.97 = ρ - 1.00 × 10⁻³
ρ = 42.97m/s³
Therefore, the density of the small spheres is 42.97m/s³.
Learn more about Density here:
https://brainly.com/question/29775886
#SPJ1
assuming charge 1 is located at the origin of the x axis and the positive x axis points to the right, find the two possible values x3,r (the position of charge 3 to the right of charge 1) and x3,l (the position of charge 3 to the left of charge 1).
This is a physics problem involving Coulomb's Law, which states that the force between two point charges is given by the equation F = (k * q1 * q2) / r², where k is the Coulomb constant, q1 and q2 are the charges, and r is the distance between the charges.
To find the position of charge 3 to the right of charge 1, we need to find the value of x³,r such that the net force on charge 3 is zero. This is because if the net force on charge 3 is not zero, it will accelerate and move away from its current position.
Similarly, to find the position of charge 3 to the left of charge 1, we need to find the value of x3,l such that the net force on charge 3 is zero.
The exact value of x3,r and x3,l will depend on the values of q1, q3 and the distance from charge 3 to charge 1.
Learn more about Coulomb's Law here:
https://brainly.com/question/506926
#SPJ4
(a) Find the direction of the force on a proton (a positively charged particle) moving through the magnetic fields in Figure P19.2, as shown. (b) Repeat part (a), assuming the moving particle is an electron
As the curved path is confined to the XY plane the component of magnitude.
Find the direction of the force on a proton ?
we can see the direction of magnetic force on the proton is towards right and on electron is towards left. Hence, the magnitude of force on electron and proton under the same conditions is equal but the direction of magnetic force is opposite due to opposite signs of these charges.The right hand rule states that: to determine the direction of the magnetic force on a positive moving charge, point your right thumb in the direction of the velocity (v), your index finger in the direction of the magnetic field (B), and your middle finger will point in the direction of the the resulting magnetic force .Electron will move anticlockwise and proton moves clockwise.We need the direction angle of F, i.e. the counterclockwise angle F makes with the positive x axis. Hence, the magnitude is 658 N and the direction angle is 233.9°.
To learn more about proton refers to:
https://brainly.com/question/29398285
#SPJ4
Need the answers can someone help me please
An update can be caused by changes to props or state. These methods are called in the following order when a component is being re-rendered.
what is the co ordinates of initial and terminal points?
The length of the arrow indicates the magnitude of the vector, and the direction of the arrow is the direction of the vector. The point at the tail of the arrow is called the initial point of the vector, and the tip of the arrow is called the terminal point.Vectors are identified by magnitude, or the length of the line, and direction, represented by the arrowhead pointing toward the terminal point. The position vector has an initial point at (0,0) and is identified by its terminal point ⟨a,b⟩.Zero vector A vector whose initial point and terminal point both lie at the origin; denoted by 0 = 〈0, 0〉.
The terminal point p(x, y) on the unit circle determined by the giving value of t = -3π/4 is determined to be P (1/√2, -1/√2 ).To learn more about coordinates refers to:
https://brainly.com/question/24513436
#SPJ1
4. On Earth the average atmospheric pressure at the surface is 1013254 Pa. If we assume that theradius of Earth is 6,4 x 10° m and the acceleration of gravity is 9.8 m/s®, what is the mass ofEarth's atmosphere? Hint: You will need to use the equations for force, pressure, and the surfacearea of a sphere, but you will need to anabyze the units to confirm how these get combined.) USCthe following values to solve this problem, {6 pts}1 atm = Peame= 101325 Pa; Rew =64x10%m; g=9.8 mV/s?Ending units:
If we assume that the radius of Earth is 6,4 x 10° m and the acceleration of gravity is 9.8 m/s®, than the mass of Earth's atmosphere is 5.322 * 1016 kg.
What is pressure ?
The magnitude of force applied to a certain region is referred to as pressure. So either a strong force or a strong force applied over a short area can cause a lot of pressure (or do both).
Why does air pressure exist?
The atoms and molecules that comprise the many layers of the atmosphere are continually moving in arbitrary directions. Despite their modest size, when they hit a surface, they apply pressure that humans perceive as a force.
To learn more about pressure here
brainly.com/question/912155
#SPJ4
a phenomenon is modeled using n dimensional variables with k primary dimensions. the number of non-dimensional variables would be question 2 options: a. k b. n c. n-k d. n k
A phenomenon is modeled using n dimensional variables with k primary dimensions, so the number of non-dimensional variables would be option c. n-k.
Measurements with quantitative data and distinct sizes are referred to as dimensional variables. Variables with dimensions and yet no constant value are called dimensional variables. Non-dimensional variables, on the other hand, are things that lack both dimensions and a variable value.
Quantities with dimensions but no constant value are called dimensional variables. Non-dimensional variables, on the other side, do not have the value of any variable or even the dimensions. Physical quantities with changing values but no dimensions are typically considered to be dimensionless variables.
To learn more about primary dimensions here
brainly.com/question/13770353
#SPJ4
suppose a car's velocity is to the left, and its acceleration is to the right. which of the following describes this car's motion?
This car is undergoing negative acceleration, meaning that its velocity is decreasing as it moves to the left. The car's motion can be described as decelerating to the left.
What is acceleration?Acceleration is the rate of change of velocity. It is the rate at which an object's velocity changes over time. It is a vector quantity, meaning it has both magnitude and direction. Acceleration can be caused by a number of forces, such as gravity, friction, and applied forces. In one dimension, acceleration is the change in velocity divided by the time it takes for the change to occur. In two dimensions, acceleration is the rate at which an object's velocity vector changes in magnitude and/or direction. Acceleration can be positive, negative, or zero. Positive acceleration occurs when an object speeds up, negative acceleration occurs when an object slows down, and zero acceleration occurs when an object's velocity remains constant.
To learn more about acceleration
https://brainly.com/question/460763
#SPJ4
A cart travels 4 meters east and then 4 meters north.
Determine the magnitude of the cartâs resultant displacement
Answer:
Displacement = √(4^2 + 4^2) = √(16 + 16) = √32 = 4√2 meters
Explanation:
To determine the magnitude of the cart's resultant displacement, we can use the Pythagorean theorem. The Pythagorean theorem states that the square of the length of the hypotenuse (the displacement) of a right triangle is equal to the sum of the squares of the lengths of the other two sides.
We can imagine the cart's displacement as the hypotenuse of a right triangle, where one side is 4 meters (the eastward displacement) and the other side is 4 meters (the northward displacement). Using the Pythagorean theorem, we can calculate the magnitude of the displacement as follows:
Displacement = √(4^2 + 4^2) = √(16 + 16) = √32 = 4√2 meters
So the magnitude of the cart's resultant displacement is 4√2 meters.
a 6kg box is traveling at a speed of 10 m/s. suddenly it comes across a rough patch in the ground, which exerts a friction force of 40 n on the box. how far will the box go before it stops?
The box will go 7.5 meter before it stops.
What is speed?Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.
Initial speed of the box = 10 m/s.
Final speed of the box = 0 m/s.
Deacceleration of the box = (40 ÷ 6) m/s² = (20/3) m/s²
Hence, distance travelled before it stops = u²/2a
= 10²/(2 ×20/3) m
= (100 × 3)/(2 × 20) m
= 7.5 m.
So, the box will go 7.5 meter before it stops.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
Drag the correct arrow to the diagram.
The diagram shows a series of volcanic islands and a hot spot. Determine the direction of movement of the tectonic plate that helped form the islands.
2023 Edmentum. All rights reserved.
ocean
series of volcanic islands
motion of plate
hot
spot
Convergent boundaries occur when two plates move in the opposite direction until they collide and create mountains and volcanoes. In the image, the arrows direction is horizontal and oposite to each other.
What are convergent boundaries?
Collision area between two plates. The collition might occur between,
Two oceanic platesOne oceanic plate with a continental one, Two continental plates.When two oceanic plates collide, magma rises to the surface by crevices, creating volcanic arches. In these boundaries occur vertical movements and might originate from protruding areas. There is compressional stress between plates.
In the image, the arrows direction is horizontal and oposite to each other.
You can learn more about convergent boundaries at
https://brainly.com/question/16911364
#SPJ1
suppose that the weekly sales volume y (in thousands of units sold) depends on the price per unit (in dollars) of the product according to the following formula. y= 32/ (3p+1 (-2/5)) , p>0 (a) What is the rate of change in sales volume when the price is $20? (Round your answer to three decimal places.)
(b) Interpret your answer to part (a). (Round your answer to the nearest whole number.)
If the price increases $1, the sales volume will decrease by _____ units.
When the price is set at $20, the rate of change in sales volume is -0.086. The number of units sold will fall by 86.
What is volume?Volume is defined as the space occupied by an item inside the confines of three-dimensional space. It is also known as the object's capacity. Volume is a measurement of an object's capacity. For example, the capacity of a cup is 100 ml if it can carry 100 ml of water up to the brim. Volume is also the amount of space filled by a three-dimensional object. Volume and mass are the two fundamental qualities of matter. Volume is simply the amount of space occupied by a thing. There are several methods for measuring volume depending on the physical condition of an item.
Here,
dy/dp = -174/5 [3p + 1]^-7/5
Substitute p = 20 in the above equation, we get
dy/dp = -0.086
(b) The sales volume will decrease by 86 units.
The rate of change in sales volume when the price is $20 is -0.086. The sales volume will decrease by 86 units.
To know more about volume,
https://brainly.com/question/10831664
#SPJ4
Explain the direct comparison method of measurement
Answer:
The direct comparison method of measurement is a method of comparison in which an unknown measurement is compared to a known measurement. This method is used to determine the size, weight, or volume of an unknown object by comparing it to an object whose size, weight, or volume is already known. For example, if you need to determine the weight of an object and have a known weight that is similar in size, you can compare the two objects and estimate the unknown weight. This method of measurement is often used in situations where a more precise measurement is not possible or practical.
give me brainiest
When the volume of a gas is decreased at constant temperature the pressure increases because the moleculesO Strike unit area of the walls of the container more oftenO Strike the unit area of the walls of the container with giher speedO Strike the unit area of the wall of the container with lesser speedO Move with more kinetic energy
When the volume of a gas is decreased at a constant temperature the pressure increases because the molecules a. Strike the unit area of the walls of the container more often.
We need to keep in mind that the kinetic energy or Speed of molecules of ideal gases depends on upon temperature and as the temperature increases the Kinetic energy of molecules increases.
So at constant pressure, the rest of the reasons(Options) mentioned can not increase.
Let's take an example of a small area on the surface or wall of the container. earlier when the volume was large, it had a lower probability of being hit by a molecule but now space is small, so it will be hit by more molecules so, high pressure will be generated on this area.
which results in pressure increases.
Learn More pressure of gases: https://brainly.com/question/25736513
#SPJ4
What term describes speeding up,
slowing down, and changing
direction?
A. acceleration
B. neither
C. speed
Answer:A: Acceleration
Explanation: I hope this helps!
a 130 g air-track glider is attached to a spring. the glider is pushed in 11.2 cm and released. a student with a stopwatch finds that 14.0 oscillations take 9.00 s . Part A What is the spring constant
The spring constant can be calculated as: 12.51 N.
The formula for calculating the period of oscillation is written as the following:
[tex]T=2\pi \sqrt{\frac{m}{k} } \\[/tex]
m is the mass of the spring.
k is the spring constant.
Making the spring constant "k" the subject of the formula will give us the following expression;
[tex]k=4\pi ^{2} \frac{m}{T^{2} } \\[/tex]
Get the period of oscillation "T"
T= 1/f
frequency "f" can express the number of oscillations completed in one second.
If a student with a stopwatch finds that 12 oscillations take 15.0 s, the number of oscillations in one sec will be 9/14 = 0.64 osc.
Period T = 1/0.64 = 1.56sec
Get the required spring constant
[tex]K=4\pi ^{2} \frac{m}{T^{2} } \\k= 4(3.14)^{2}\frac{0.13}{0.64^{2} } \\[/tex]
K= 12.51 N
Learn more about oscillations:
brainly.com/question/13112321
#SPJ4
Tim, with mass 76.6 kg, climbs a gymna- sium rope a distance of 4.3 m. The acceleration of gravity is 9.8 m/s². How much potential energy does Tim gain? Answer in units of J.
Answer: Tim gains a potential energy of 3227.93 Joules.
Explanation:
Tim, with mass 76.6 kg, climbs a gymnasium rope a distance of 4.3 m. The acceleration of gravity is 9.8 m/s². How much potential energy does Tim gain?
Data:
m = 76.6 kg
h = 4.3 m
a = 9.8 m/s²
Ep = ?
To calculate potential energy, we have the formula
Ep = m × g × hWhere
Ep = potential energym = massg = acceleration due to gravityh = heightSince it asks us to calculate Tim's potential energy, we should not do formula clearance.
Therefore, we substitute data in the formula and solve, then
Ep = 76.6 kg × 9.8 m/s² × 4.3 m
Ep = 3227.93 kg × m/s² × m
Ep 3227.93 N × m
Ep = 3227.93 Joules
Tim gains a potential energy of 3227.93 Joules.
ヘ( ^o^)ノ＼(^_^ )If you want to learn more about physics, I share this link to complement your learning:
https://brainly.com/question/6848766
using conversions and data in the chapter, determine the number of hydrogen atoms required to obtain 1.0 kg of hydrogen. a hydrogen atom has a mass of 1.0 u.
The number of hydrogen atoms required to obtain 1.0 kg of hydrogen is 6.022 x 10^30.
1 kilogram is equal to 1000 grams and 1 atomic mass unit (u) is defined as one twelfth of the mass of a carbon-12 atom, which is 1.6605 x 10^-27 kg.
So, 1 u = 1.6605 x 10^-27 kg
Therefore, 1.0 kg of hydrogen is equal to 1.0 x 10^3 / 1.6605 x 10^-27 = 6.022 x 10^30 hydrogen atoms.
So, the number of hydrogen atoms required to obtain 1.0 kg of hydrogen is 6.022 x 10^30.
A conversion factor converts one unit to another by utilizing your knowledge of unit relationships. For example, if you know that there are 2.54 centimeters in an inch (or 2.2 pounds in a kilogram or 101.3 kilopascals in an atmosphere), converting between those units becomes simple algebra. It is critical to understand some common temperature, size, and pressure conversions, as well as metric prefixes.
Learn more about conversion factor here:
https://brainly.com/question/30166433
#SPJ4
A glass cube of index 1.5 lies on a table. A coin is embedded in the glass cube near the surface of the table. When you look at the coin from above, which of the following is true?
The coin appears below the bottom of the cube.
The coin apparent location is the same as it’s real location.
The coin appears to be closer to the top of the cube.
Due to the refraction of light when we look the coin embedded in a glass cube it appears to be closer at the top of the cube.
Refraction is the bending of a light ray when it goes from an optically rare medium to an optically denser medium. It is determined by the refractive index. Refractive index of a substance is the ratio the speed of light in a vacuum to the speed of light in the substance.
So refractive index 1.5 tells that the speed of light in the glass will be 1.5 times slower than the speed of light in vacuum. That's why it will gets bent towards the normal when it will pass through the glass. So the coin will appear closer to the top surface of the cube.
Hence the option C is correct.
To know more about refraction of light, here
https://brainly.com/question/14760207
#SPJ4
Explain the dynamic characteristics of instruments
Answer:
speed of response and response time , lag , fidelity,and dynamic errors are the dynamic characteristics of instruments.
A 24kg is accelerated by a constant force up a frictionless plane that makes an angle of 37° with the horizontal. Starting from rest at the bottom, it covers a distance of 18 metres in 3 seconds. What is the average power required to accomplish the process
forty-five seconds after a bowl begins to leak, the bowl is losing 0.33 ounces of liquid per second. let l(t) represent the amount of liquid that has leaked at any given time, and let t be measured in seconds. which of the following expressions represents this scenario?
The expression that represents the scenario forty-five seconds after a bowl begins to leak, the bowl is losing 0.28 ounces of liquid per second would be l(t) = 0.28t.
When a bowl begins to leak, it can be represented mathematically as a function of time, l(t). In this case, the bowl is losing 0.28 ounces of liquid per second, so after 45 seconds, the total amount lost would be 0.28 x 45 = 12.6 ounces.
This function can be used to calculate the amount of liquid lost over any given amount of time, depending on the rate of the leak. It is important to note that this calculation only applies to liquids with a known rate of flow.
The bowl's liquid level over time can be represented by the expression l(t) = 0.28t. This expression calculates the amount of liquid lost from the bowl each second.
To learn more about liquid, click here:
https://brainly.com/question/752663
#SPJ4
consider the 0/1/2 knapsack problem. unlike 0/1 knapsack problem which restricts xi to be either 0 or 1, 0/1/2 knapsack problem allows xi to be either 0 or 1 or 2 (that is, we assume that 2 copies of each object i are av
In the 0/1/2 knapsack problem, the objective is to select the set of things that maximises the overall value of the items while staying within the limits of the knapsack. Each item may be selected up to twice.
Similar to the 0/1 knapsack problem, the issue can be written as a linear programming problem and resolved using dynamic programming or the branch and bound approach. The 0/1/2 knapsack problem and the 0/1 knapsack problem are fundamentally different from one another because in the latter, each item may be selected up to twice, but in the former, each item may only be selected once. Accordingly, depending on the particular issue instance, the 0/1/2 knapsack problem is more adaptable and might result in different solutions than the 0/1 knapsack problem. Using a modified version of the conventional 0/1 knapsack method is a common strategy for solving the 0/1/2 knapsack issue.
learn more about knapsack problem here:
https://brainly.com/question/17018636
#SPJ4
Water flows inside a horizontal pipe so that at the beginning of the pipe its velocity vi is lower than the velocity at the end of the pipe v2. Compare the pressures at the beginning P1 and at the end of the pipe P2. Pi < P2 P1 = P2 P1 > P2 Not enough information.
The pressure at the beginning and the end of the pipe cannot be determined without additional information.
What is velocity?Velocity is a vector quantity that measures the rate of change of an object’s position in a given direction. It is the rate of displacement over time, or the speed at which an object is moving. Velocity is the speed of an object in a particular direction. It is measured in meters per second (m/s) or kilometers per hour (km/h). Velocity is a combination of both speed and direction, and it can also be represented by an arrow pointing in the direction of motion.
The pressure at the beginning of the pipe (P1) will be determined by the pressure of the source supplying the pipe, such as a pump, as well as the friction losses that occur along the pipe. The pressure at the end of the pipe (P2) will be determined by the available pressure of the source supplying the pipe, the friction losses that occur along the pipe, and the velocity at the end (v2). As such, without knowing the source pressure, the friction losses, and the velocities, it is impossible to determine whether P1 is less than, equal to, or greater than P2.
To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4
two lightweight metal spheres are suspended near each other from insulating threads. one sphere has a net charge; the other sphere has no net charge. the spheres will exert no net electrostatic corce on each other. attract each other. repel each other. do any of these things depending on the sign of the net charge on the one sphere.
From insulating threads, two thin metal spheres are suspended close to one another. One sphere has a net charge while the other sphere has no net charge. The spheres will exert no net electrostatic force on each other. The correct option is A.
The uncharged balloon in an experiment advances toward the charged rod. The net charge from the charged sphere distributes onto both evenly, so they are each charged with same sign. The positive and negative charges neutralise, any residual charge is spread evenly. So, both spheres are charged with same sign. If there is no residual charge, both remain neutral.
Suppose the sphere is positively charged, the neutrally charged sphere becomes is negatively charged. The other sphere is polarised by the positively charged one, with a negative charge on the side that is nearest to the first sphere. Now the second sphere moves towards the first sphere.
To know more about charges:
https://brainly.com/question/1554264
#SPJ4
pls help me with this
thanks
i think it also doubles in area
A train starts from rest and speeds up for 15 minutes until it reaches a constant velocity of 100 miles/hour. It stays at this speed for half an hour. Then it slows down for another 15 minutes until it is still. Which of the following correctly describes the position vs time graph of the train’s journey?
A: The first 15 minutes is a curve that is concave upward, the middle portion is a straight line with slope 100 miles/hour, and the last portion is a concave downward curve.
B: The first 15 minutes is a curve that is concave downward, the middle portion is a straight line with slope 100 miles/hour, and the last portion is a concave upward curve.
C: The first 15 minutes is a curve that is concave upward, the middle portion is a straight line with slope zero, and the last portion is a concave downward curve.
D: The first 15 minutes is a curve that is concave downward, the middle portion is a straight line with slope zero, and the last portion is a concave upward curve.
Answer:
The correct answer is: B: The first 15 minutes is a curve that is concave downward, the middle portion is a straight line with slope 100 miles/hour, and the last portion is a concave upward curve.
Explanation:
The first 15 minutes of the journey, the train is accelerating from rest to reach a constant velocity of 100 miles/hour. The position vs time graph of this portion of the journey would be a curve that is concave downward, as the acceleration is positive and the velocity is increasing.
The middle portion of the journey, the train is moving at a constant velocity of 100 miles/hour. The position vs time graph of this portion of the journey would be a straight line with slope 100 miles/hour, as the velocity is constant.
The last 15 minutes of the journey, the train is slowing down to come to a stop. The position vs time graph of this portion of the journey would be a curve that is concave upward, as the acceleration is negative and the velocity is decreasing.
The radius and length of a steel cylinder are 40 mm and 110 mm, respectively. If the mass density of steel is 7850 kg/m3 , determine the weight of the cylinder in pounds.
The weight of the cylinder in pounds is 26.45 lbs.
Solving for the weight of the cylinder in pounds:To determine the weight of the cylinder in pounds, we first need to calculate its volume. The volume of a cylinder is given by :
V = πr²h
where,
r = the radius
h = the height (or length) of the cylinder.
Given the radius and length, we can substitute these values into the formula to get:
V = π * (0.04 m)² * (0.11 m) = 0.001539 m³
Since the mass density of steel is 7850 kg/m3, we can multiply the volume by the mass density to find the mass of the cylinder:
mass = 7850 kg/m³ * 0.001539 m³
mass = 12 kg
To convert this mass to pounds, we can multiply it by 2.20462 (1kg = 2.20462 lbs)
12 kg * 2.20462 = 26.45 lbs
Hence, the weight of the cylinder in pounds is 26.45 lbs.
Learn more weight on
https://brainly.com/question/10069252
#SPJ1
do your graphs show the trends you expected based on what you know about absorbance and transmittance using a spectrophotometer? why or why not? (2 pts.)
It depends on the data. If the data matches what is expected based on the known properties of absorbance and transmittance using a spectrophotometer, then the graphs will show the expected trends.
If the data does not match what is expected, then the graphs may not show the expected trends.
A diagram or pictorial representation that organises the depiction of data or values is known as a graph. The relationships between two or more items are frequently represented by the points on a graph.
To know more about graph here
https://brainly.com/question/17267403
#SPJ4
I NEED HELP AND PLS BE QUICK
A positively charged object hovers a few
centimeters above a positively charged
platform. The object is not moving because
the repulsive force of the platform balances
the object's weight. What will happen if the
object is pushed down and then released?
Answer:It will shoot back up
Explanation:It is not going to change from positive to negative because you pushed it! It will stay positive and repel away from the positive.