Refer to photo , there are seven questions .

When a gas undergoes a quasi-static isobaric change in volume from 10.0 to 2.0 l, 15 j of work from an external source are required then the pressure of the gas is

Work done is given as

W=PdV

15 = P ×( 20-10)

P = 1.5 bar

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure (symbol: p or P). The pressure relative to the surrounding air is known as gauge pressure, also written gage pressure[a].

Pressure is expressed using a variety of units. Some of these result from dividing a unit of force by a unit of area; the pound-force per square inch (psi), which is equivalent to one newton per square meter (N/m2) in the SI, is the standard unit of pressure in the imperial and U.S.

To learn more about pressure from the given link:

brainly.com/question/12971272

#SPJ4

By using uniform motion, the maximum height of arrow is 585.326 meters.

We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

vo = 66 m/s

vt = 0 m/s

gmars = 3.721 m/s²

By using the second equation, we can calculate the maximum height

vt² = vo² + 2a . s

0² = 66² - 2g . y

2 . 3.721 y = 4356

y = 585.326 meters

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

Answer:

neutron and proton are the answer

By using vector

a. the distance traveled is 2.6 miles

b. the resultant displacement is s = ( 0.6 i - 0.8 j ) miles
the magnitude is |s| = 0.6 miles

We need to know about vectors to solve this problem. Vector has magnitude and also direction. Displacement is included in vector. It can be written as

s = sx i + sy j + sz k

where s is displacement, sx is displacement on x-axis, sy is displacement on y-axis and sz us displacement on z-axis.

From the question above, we know that

east = positive x

south = negative y

west = negative x

north = positive y

s1 = 0.8 i

s2 = -1.2 j

s3 = -0.2 i

s3 = 0.4 j

The distance traveled is

s = s1 + s2 + s3 + s4

s = 0.8 + 1.2 + 0.2 + 0.4

s = 2.6 miles

The resultant displacement is

s = s1 + s2 + s3 + s4

s = 0.8 i -1.2 j -0.2 i + 0.4 j

s = ( 0.6 i - 0.8 j ) miles

The magnitude is

|s| = √sx²

|s| = √0.6²

|s| = 0.6 miles

Find more on vector at: https://brainly.com/question/25811261

#SPJ4

Transformers may change the voltage in two different ways which are

This is further explained below.

Generally, Electric transformers are devices that can change the direction and speed of the flow of current in an electrical circuit. They do this by adjusting the voltage of the existing flow of current through the use of electromagnetic induction.

In conclusion,  There are two distinct methods by which transformers may alter the voltage, and they are

The step-up transformer is usually used for the transmitting of electric charge through a lengthy distance where power drop might be experienced, while the step-down is used to moderate said transmitted charge to a consumer.

Read more about electromagnetic induction.

https://brainly.com/question/26334813

#SPJ1

Answer:

The topic of the graph is the age of people getting married. The x-axis shows the year and the y-axis shows the age of those getting married. The graph shows that as time has gone on, people have waited longer to marry. This is likely because they want to wait to find their true love before settling down, and there is a lot less pressure on people to get married now. Based on the statistics shown in the graph, I believe that in 10 years the average age of marriage will be between the age of 30 and 35.

the mass of the astronaut will be 70KG, the mass stays the same everywhere.

The infinite three-dimensional expanse of space is where things and events have relative positions and directions. While modern physicists typically consider it to be a portion of an unbounded four-dimensional continuum known as spacetime, physical space is frequently conceptualized in classical physics as having three linear dimensions. It is believed that grasping the idea of space is essential to comprehending the physical cosmos. Philosophers dispute on whether it is a thing in and of itself, a connection between entities, or a component of a conceptual framework. Mathematicians started looking at non-Euclidean geometries in the 19th and 20th centuries, when space is thought of as curved rather than flat. Space around gravitational fields deviates from Euclidean space, according to Albert Einstein's theory of general relativity.

To know more about space, visit;

https://brainly.com/question/19723800

#SPJ4

Thank you !

The ratio of the size of the electrostatic repulsion to that of the gravitational attraction is 4.17×[tex]10^{42}[/tex]

The air resistance on the feather is 20.2275 x [tex]10^9[/tex]N.

Air resistance is the force the air applies to objects moving through it. Scientists frequently refer to this force as drag or drag force. Usually, this force is utilized to slow down the object's speed by acting in the opposite direction.

The moving body is subject to the frictional force of air resistance. Air resistance slows a moving body down. The body experiences higher air resistance the more it moves.

Given:

Mass, m = 10g

Height, h = 3m

Time, t = 2s

Force constant, k = 8.99 x [tex]10^9 Nm^2[/tex]

To find:

Air resistance, Fa = ?

Formula:

[tex]Fa = kv^2[/tex]

Calculations:

Speed, v = h/t

v = 3/2

v = 1.5m/s

Fa = 8.99 x [tex]10^9[/tex] x 1.52

Fa = 20.2275 x [tex]10^9[/tex]N

Result:

The air resistance on the feather is found to be 20.2275 x [tex]10^9[/tex]N.

Learn more about Air resistance here:

https://brainly.com/question/8141158

#SPJ9

By using uniform motion, the speed before hitting the ground is 23.00 m/s.

We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

vo = 0 m/s

t = 1.45 s

y = 27 m

g = 9.8 m/s²

By using the second equation, we can calculate the speed before hit the ground.

vt² = vo² + 2a . s

vt² = 0² + 2g . 27

vt² = 2 . 9.8 . 27

vt² = 529.2

vt = 23.00 m/s

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

The electric potential  between the two charges is 91.68 V.

The electric potential  between the two charges is calculated as follows;

V = Ed

where;

Substitute the given parameters and solve for electric potential,

V = 573 N/c x 0.16 m

V = 91.68 V

Thus, the electric potential  between the two charges is 91.68 V.

Learn more about electric potential here: https://brainly.com/question/26978411

#SPJ4

The ball will reach the ground after 1.8 seconds.

We have a ball thrown directly downward.

We have to determine after what time interval does it strike the ground,

According to the question -

u = 8.55 m/s

S = 30.4 m

a = 9.8 m/[tex]s^{2}[/tex]

Using the Second Equation of Motion -

x = ut + [tex]\frac{1}{2} at^{2}[/tex]

Substituting the values -

30.4 = 8.55t + 4.9[tex]t^{2}[/tex]

4.9[tex]t^{2}[/tex] + 8.55t - 30.4 = 0

Solve this quadratic equation, you will get -

t = 1.8 seconds.

Hence, the ball will reach the ground after 1.8 seconds.

To solve more questions on Kinematics, visit the link below-

https://brainly.com/question/1593696

#SPJ4

which is 0.05 kg/L Just keep in mind that the concentration in the tank will fluctuate over time until it reaches the inflow concentration.

Chemistry involves creating and manipulating solutions frequently, yet a variety of concentration units are employed depending on the reaction or kind of analysis. Molality (M = moles solute/kg solution), mass% (mass solute/mass solution), and mass per volume concentrations are a few examples of frequent units.

After t minutes, the salt mass in the tank with a concentration of

0.02 kg/L is 2 kg.

According to the way the question is written, the tank's concentration is 0.02 kg/L, and its volume, which is independent of its input and outflow quantities, is 100 L. In light of this, multiplying the concentration by the volume will provide the amount of salt in the tank at the specified concentration.

(0.02kg/L)(100L) = 2kg

Just keep in mind that the concentration in the tank will fluctuate over time until it reaches the inflow concentration, which is 0.05 kg/L. The amount of time it will take for that to happen can be predicted by an equation, but that is not the issue being addressed here; rather, it is how much salt will be in the tank at time t when the tank concentration is

0.02 kg/L.

learn more about brine solution:

https://brainly.com/question/13618917

#SPJ4

The complete question is:

In a huge tank that initially stores 100 L of brine solution with 0.5 kg of salt dissolved in it, a brine solution of salt flows at a steady rate of 8 L/min. The interior of the tank is kept thoroughly stirred, and the solution drains at the same rate. Determine the mass of salt in the tank after t minutes when the concentration of salt in the tank reaches 0.02 kg/L if the salt concentration in the brine entering the tank is 0.05 kg/L.

The solubility of CO₂ in soda when the soda is canned under a pressure of 4.5 atm will 129.03 moles L⁻¹

According to Henry's law, the amount of a specific gas that dissolves in a liquid is directly proportional to the partial pressure of that gas in equilibrium with that liquid at a particular temperature.

Only at moderate pressure and temperature does Henry's law apply. iii. Henry's law is not followed by the gases reacting with the solvent. Ammonia or HCl, for instance, react with water and do not follow this rule.

Henry's law states that P=Ks S is the solubility in moles. Henry's law is L1 K. P stands for continuous pressure in atm.

Change the values in the preceding equation to:

S = Kp = 4 / 3.1*10²

= 129.03 moles L⁻¹

Learn more about Henry's law here-

https://brainly.com/question/16222358

#SPJ4

The average speed = (2 × the length of the path to the university in km) / (7.7 h)

              average speed = total distance covered [tex]\div[/tex] total time elapsed

              time to go - time to come = total time taken = 7.7 h

               [tex]\begin{aligned}\\ \text{average speed} & =\small \frac{2\times L (km)}{7.7 \, h}\\\\&=\small \frac{2L}{7.7} \,km/h\\\end{aligned}[/tex]

#SPJ4

Distance covered by the box is 135m.

Equations of motion in physics are equations that explain how a physical system behaves in terms of how its motion changes over time. The behaviour of a physical system is described in further detail by the equations of motion as a collection of mathematical functions expressed in terms of dynamic variables.

The following are the three equations of motion:

the theoretical question is complete but the diagram is missing, its added in the attachment.

to learn more about equation of motion go to -

https://brainly.com/question/25951773

#SPJ4

As an airplane accelerates in level flight, pilot must adjust to keep level and balance at the angle of attack.

When the air flows through the wingspan of an airplane, it generates a pressure difference between the upper and lower portions of wings. Due to this pressure difference, an upward force is generated that acts in upwards direction known as the aerodynamics lift.

In this case:

At  the equilibrium condition, the upward lift generated by the airplane is equal to the weight of airplane. The lift generated depends upon area of the wind span, density, and velocity of the air; these values can not be changed by the pilot. But by changing the angle of attack parameter, the desired lift can be produced, and angle of attack can be changed easily by the pilot.

Therefore as an airplane accelerates in level flight, the parameter the pilot must adjust to keep it level and balance the lift to the weight is angle of attack.

To know more about air visit: brainly.com/question/19368011

#SPJ4

If the cold drink will be left out for 15 minutes its temperature would be 72 F.

The formula for Newton’s Law of Cooling is given in the adjoining image.

Applying the given values in the above equation,

T- T1 = (TS - T1) e^-kt

42 -72 = (39-72) e^-2k

- 30/ -33 = e^-2k

K = 0.045

Putting k = 0.045 and t = 15 minutes

T comes out to be 72 F.

Hence, if the cold drink will be left out for 15 minutes its temperature would be 72 F.

To know about the "Newtons's Law Of Cooling", refer to the link given below:

https://brainly.com/question/14643865?referrer=searchResults

#SPJ4

it goes as follows- B> C> A> D

Bees frequently cooperate for the benefit of the colony. They occasionally may have an excessive charge on them. In the hive, four pairs of bees collide with one another. These bees can be visualized as identical conducting spheres. Sort the bees according to the size of the charge transfer's magnitude. Bees live in hives with a distinct social structure. Three varieties of bees, each with a specific job, are present in each hive. The female workers gather food and take care of the hive, while the male drones fertilize the eggs laid by the queen. Every type of bee is modified for its specific job. As they get older, the workers' tasks change.

As we can see, there are four pairs of bees, conducting spheres, and it appears that B is higher than C, which is higher than A, which is lower than D.

Learn more about bees here-

https://brainly.com/question/3781368

#SPJ4

Answer:

La luz visible es una onda electromagnética, que consiste en oscilaciones eléctricas y campos magnéticos que viajan por el espacio. La frecuencia de la onda determina el color: 4×1014 Hz es la luz roja, 8×1014 Hz es la luz violeta, y entre estos en el rango de 4-8×1014 Hz están todos los otros colores del arco iris

Explanation:

Answer:

Sunlight is the earth's natural form of visible light it is typically referred to as white light.

The correct answer is 44.6 miles/gallon.

Finding the complete mileage and fuel consumption of a car over the course of the entire journey is necessary to answer this type of query. We must thus calculate the value for each mile separately using the provided data in order to avoid getting the incorrect answer by just adding the value of the gallons.

The number of miles an automobile can go on one gallon of fuel is known as MPG, or miles per gallon. A car's fuel efficiency is mostly measured by its MPG; the greater the MPG, the more efficient the vehicle is.

Speed of the automobile = 19 km/L

Use the following conversion factor to convert km/l into miles/gallon

19(km×0.621miles/km)/(l×0.264gallon/L)

=44.6 miles/gallon

To learn more about miles per gallon refer the link:

https://brainly.com/question/926748

#SPJ4

A sine wave has a rms value of 208 v, the peak value is 294.15v.

The RMS value of a set of values (or a continuous-time waveform) is the square root of the arithmetic mean of the squares of the values, or square of the function that defines the continuous waveform. In physics, RMS current value can also be defined as the "value of the direct current that dissipates same power in a resistor".

Physical scientists often use the term root mean square as a synonym for standard deviation when it can be assumed input signal has zero mean, that is, referring to the square root of mean squared deviation of a signal from a given baseline or fit. This is useful for the electrical engineers in calculating "AC only" RMS of a signal. Standard deviation being the RMS of a signal's variation about the mean, rather than about 0, DC component is removed (that is, RMS(signal) = std e v (signal) if the mean signal is 0).

Mean power, or root mean square (RMS) power handling, refers to how much continuous power speaker can handle. The peak power handling value refers to the maximum power level that speaker is capable of utilizing in short bursts.

Therefore,

Peak value= rms[tex]\sqrt{2}[/tex]

                =294.15v

To know more about engineer visit: brainly.com/question/19117846

#SPJ4

For mass to levitate charge must be 9.692×10⁻⁸ C.

For mass to levitate,

mg=Fe ( Fe here refers to electrostatic force)

mg=(kq₁q₂/r²)

here q₁=q₂,

q²=(mgr²/k)

q²=( 26.9×10⁻³×9.81×(1.79×10⁻²)²)/9×10⁹

q²=93.947×10⁻¹⁶

q = 9.692×10⁻⁸ C

To learn more about charge, visit: https://brainly.com/question/14597668

#SPJ4

Answer:

B. one kind of matter changes into a different kind of matter with different properties

The formula that we will apply to get to the answer would be:

2as = v² - u²

Using this we will get the answer as 82.35425 m.

Here,

U= initial velocity

V= final velocity

S= displacement of the body

A= acceleration of the body/ acceleration due to gravity (as per the question)

Something that has not been mentioned here but is present in the original question is that the acceleration due to gravity has been given as 0.170g.

While throwing the wrench on earth,

v² - u² = 2as

⇒[tex]u = \sqrt{v^2 - 2as}[/tex]

⇒ u = [tex]\sqrt{0-2 * -9.81 * 14}[/tex]

⇒ u= 16.57347 m/s

Since the astronaut gives the same starting speed in both the places so the u on moon would be 16.57347 m/s

While throwing the wrench on moon,

v² - u² = 2as

s = [tex]\frac{v^2 - u^2}{2a}[/tex]

⇒ s =  [tex]\frac{0^2 - 16.57347^2}{2 * (-9.81) * 0.17}[/tex]

⇒s = 82.35425 m

so, on moon, the wrench could be thrown a distance of 82.35425 m

To know more such gravity related problems, visit:

https://brainly.com/question/4939326

#SPJ4

the definition of density is: the measure of mass of a material within a given space

The density of an object is the relation that exist between the mass and the space that the object occupies. The general formula of the density is:

ρ = m/v

Where:

For example if we want to know which is the density of a body that has a mass of 100g and a volume of 150 cm³, applying the density formula we get:

ρ = 100 g/150 cm³

ρ = 0.666 g/cm³

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

The charged particles that transferred between the glass rod and the metal sphere were electrons.

#SPJ4

The average speed in m/s of a person that jogs eight complete laps around a 400m track in a total time of 15.1 min is 0.44m/s.

Average speed of a moving body can be calculated by dividing the distance moved by the time taken.

Average speed = Distance ÷ time

According to this question, a person jogs eight complete laps around a 400m track in a total time of 15.1 min. The average speed is calculated as follows:

15.1 minutes in seconds is as follows = 906 seconds

Average speed = 400m ÷ 906s

Average speed = 0.44m/s

Therefore, the average speed in m/s of a person that jogs eight complete laps around a 400m track in a total time of 15.1 min is 0.44m/s.

Learn more about average speed at: https://brainly.com/question/12322912

#SPJ1