rank the six combinations of electric charges on the basis of the electric force acting on q1 . define forces pointing to the right as positive and forces pointing to the left as negative. rank in increasing order by placing the most negative on the left and the most positive on the right. to rank items as equivalent, overlap them.

1. Increase in thrust: The same cause-and-effect relationship applies to a rocket sled. When the thrust of the rocket sled is increased, it will cause an increase in the acceleration of the sled.

Acceleration is the rate at which an object's speed or velocity changes over time. It is a vector quantity, meaning it has both magnitude and direction. Acceleration can be caused by a number of factors, including forces, changes in gravity, or changes in direction. Acceleration is the second derivative of velocity with respect to time, or the rate of change of the velocity vector.

This is because the increased thrust generates more force, which in turn causes the sled to accelerate faster.
2. Increase in weight: The same cause-and-effect relationship applies to a rocket sled. When the weight of the rocket sled is increased, it will cause a decrease in the acceleration of the sled. This is because the increased weight will require more force to accelerate the sled, thus resulting in a slower acceleration.

To learn more about acceleration
https://brainly.com/question/460763
#SPJ1

The given statement is true.

To know more about electricity visit:

https://brainly.com/question/14681756

#SPJ4

A heat engine is in violation of the second rule of thermodynamics if it claims to have a thermal efficiency higher than the Carnot efficiency.

Energy is characterized as having the "ability to accomplish work, which is the capacity to apply a force sufficient to move an object." Despite this unclear definition, the concept is essentially quite straightforward: electricity merely refers to the force that drives objects. Potential and kinetic energy are the two different categories.

The ability to perform work is the most basic definition of energy. Things alter and move because of energy. It comes in many different shapes and is all around us. Cooking food requires energy.

To know more about Energy visit:

https://brainly.com/question/1932868

#SPJ4

The answer is C. Option C is the correct option. Not Specified by the Information Given.

The amount of work done by the gas on the walls of the cylinder is not specified by the information given. The amount of work done by the gas on the walls of the cylinder depends on the pressure of the gas, the temperature of the gas, and the volume of the gas.

Since none of these parameters are specified, it is not possible to determine the amount of work done by the gas on the walls of the cylinder. However, it is possible to determine the change in internal energy of the gas. Since 80 J of heat was added to the gas, the change in internal energy of the gas is 80 J.

Learn more about ideal gas:

https://brainly.com/question/27870704

#SPJ4

a. When the sun is above the horizon, it is daytime.

b. If you have a degree in electrical engineering, you are highly educated.

c. In the United States, anyone over the age of 18 can vote.

d. If you go to Paris, you can see the Mona Lisa.

a. When the sun is above the horizon, it is daytime. The sun is usually visible in the sky during the day and provides light to the earth. However, there are exceptions. B. During a solar eclipse or at the poles where the sun may not be visible for a period of time.

b. If you have a degree in electrical engineering, you are highly educated. This statement is not necessarily true, as a degree in electrical engineering does not necessarily mean that the person is highly educated.

A person may have a degree in electrical engineering, but may not have knowledge or skills in other areas.

c. In the United States, anyone over the age of 18 can vote. This statement is true. The 26th Amendment to the United States Constitution gives citizens over the age of 18 the right to vote.

d. If you go to Paris, you can see the Mona Lisa. This statement is not necessarily true. The Mona Lisa is a famous painting and is on display at the Louvre Museum in Paris, but there are many other works of art and attractions in the city and there is no guarantee that you will see the Mona Lisa during your visit.

To learn more about general knowledge-based questions at

https://brainly.com/question/8262543?referrer=searchResults

#SPJ4

(1) The gravitational potential energy of the bowling ball is 7,056 J.

(2)The potential energy  and kinetic energy of the bowling ball are 2,205 J and 37.5 J respectively.

(3) The kinetic energy of the bowling ball is 450 J.

(4) The potential energy  and kinetic energy of the child re 367.5 J and 67.5 J respectively.

The gravitational potential energy of the bowling ball is calculated by applying the following formula;

P.E = mgh

where;

P.E = ( 6kg x 9.8 m/s² x 120 m )

P.E = 7,056 J

(2) The potential energy  and kinetic energy of the bowling ball is calculated as follows;

P.E =  (3 x 9.8 x 75 )

P.E = 2,205 J

K.E = ¹/₂ mv²

K.E = ¹/₂ ( 3 ) x (5²)

K.E = 37.5 J

(3) The kinetic energy of the bowling ball is calculated as follows;

K.E = ¹/₂ mv²

K.E = ¹/₂ ( 4 ) x (15²)

K.E = 450 J

(4) The potential energy  and kinetic energy of the child is calculated as follows;

P.E =  (15 x 9.8 x 2.5 )

P.E = 367.5 J

K.E = ¹/₂ mv²

K.E = ¹/₂ ( 15 ) x (3²)

K.E = 67.5 J

Learn more about potential energy here: https://brainly.com/question/1242059

#SPJ1

The acceleration of hoverflies is 13.879[tex]\frac{m}{s^{2} }[/tex].

It has fallen height from 0.11m

Now, the remaining height is 0.29m.

When an object shifts in relation to time, there are two ways to measure the shift in the object's position. One may take into account the actual distance traveled or the distance that is shortest between the two points.

Here in lies the distinction between two incredibly basic physics ideas. Distance is the first unit of measurement used to determine how an object's location has changed, while displacement is the second.

Distance is the real unit used to describe how much an object's position has changed overall over time. Since it is a scalar quantity, all that is provided is the magnitude.

Now using third equation of motion,

[tex]v^{2}- u^{2}=2as[/tex]

[tex]v^{2}-0=2\times-9\times0.11[/tex]

[tex]v^{2}=-2.2[/tex]

v=1.5

[tex]v^{2}- u^{2}=2as[/tex] as remaining s=0.29 and v of crashing as it goes downwards which negative. 0 and u= 1-5 as its downward now by this find the acceleration.

[tex]v^{2}- u^{2}=2(a-10)s[/tex]

[tex]0^{2}- 1.5^{2}=2(a-10)\times0.29[/tex]

a=13.879[tex]\frac{m}{s^{2} }[/tex]

Learn more about acceleration

brainly.com/question/12550364

#SPJ4

Explanation:

A spiral wishing well can be a good representation of a gravitational field in the sense that it demonstrates how objects are attracted to a central point, which is similar to how objects are attracted to a massive object in a gravitational field. The well also shows how the force of gravity increases as objects get closer to the center, which is consistent with the inverse square law of gravity. However, the well is an incorrect representation of a gravitational field in the sense that it is not a three-dimensional representation of the field, but rather a two-dimensional representation. Additionally, the well does not take into account the fact that gravity is a force that acts between all objects with mass, not just those that are close to a central point.

When the proton and electron enter the electric field that is pointed to the right, the proton will be deflected to the right and the electron will be deflected to the left. This is because the proton has a positive charge and the electron has a negative charge, and opposite charges are attracted to each other. The proton and electron will move at the same speed because the electric field does not affect their speed, only their direction of motion.

According to Einstein's theory of general relativity, the orbit of Halley's Comet is determined by the curvature of spacetime caused by the mass of the sun and other celestial bodies. The comet follows an elliptical orbit around the sun, with the sun at one of the foci of the ellipse. The shape of the orbit is determined by the mass of the sun, the distance of the comet from the sun, and the velocity of the comet.

The period of the orbit of Halley's Comet is 76 years, which means that the comet takes 76 years to complete one orbit around the sun. This period is determined by the distance of the comet from the sun, the mass of the sun, and the velocity of the comet. The further the comet is from the sun, the longer the period of its orbit. As the comet approaches the sun, its ices start to vaporize and create a bright tail that can be seen from Earth.

In summary, Einstein's theory of general relativity explains that Halley's Comet only appears every 76 years because of the shape of its orbit around the sun, which is determined by the mass of the sun and the distance of the comet from the sun, as well as the velocity of the comet. The orbit is an elliptical one and the distance from the sun causes the vaporization of ices which make the tail visible from Earth.

When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles.

All forces occur in pairs, as described by the third of Newton's laws of motion in classical mechanics, so that if one object exerts a force on another, the second object exerts an equal and opposite reaction force on the first. A reaction force is the result of an opposite-direction action force. Newton's third law of motion addresses these two forces, referred to as action and reaction forces. Newton's third law states that there is an equal and opposite reaction to every action.

Here,

 2 ℎ  ℎ 11.2   O2=11.2*2=22.4 moles

mols of SO3 produced=13.5*2/2

13.5 mols

mols of O2 consumed=13.5*1/2

=6.75 mols

mols of O2 remaining=11.2-6.75

=4.45 mols of O2

The moles of O2 remaining is 4.45 moles when initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen.

To know more about reaction,

https://brainly.com/question/1071297

#SPJ4

Complete question:

When initially containing 13.5 moles of sulfur dioxide and 11.2 moles of oxygen, the remaining moles of O2 are 4.45 moles. What is reaction? What amount of oxygen is remaining?

False. An independent voltage source is a two-terminal device that can maintain a fixed potential difference between its terminals, but it does not necessarily keep the potential difference equal to its nominal voltage.

Nominal voltage is an electrical term used to describe the average, or expected, voltage of an electric circuit. It is typically used as a reference point for other measurements. Nominal voltage is typically defined as the voltage that is expected to be available under normal operating conditions, and it is often used to indicate the voltage that is desired for a particular device or system. Nominal voltage is typically specified as a range, with the lower end of the range representing the minimum acceptable voltage and the higher end of the range representing the maximum acceptable voltage.

To learn more about nominal voltage
https://brainly.com/question/26242109
#SPJ4

If the Sun's light suddenly went out, we would not notice it for at least 8 minutes from Earth. When we look at the Andromeda Galaxy, we are seeing it as it was millions of years ago. At the speed of light, communications between Earth and astronauts on the Moon would be significantly delayed.

A vacuum is a volume that is devoid of substance, often known as 'free space'. Only partial vacuums are achievable in practice. A vacuum is a space in which there is no matter or where the pressure is so low that any particles in the space have no effect on any activities that are taking place. It is a state that is far below normal atmospheric pressure and is measured in pressure units (the pascal). A vacuum is defined in science as a space devoid of substance or air. That's the simple definition, however there are always some particles of stuff in a vacuum, but far fewer than the air you're inhaling.

Here,

If the Sun's light were abruptly extinguished, we would not notice it for more than 8 minutes from Earth. When we look at the Andromeda Galaxy, we are gazing back in time to how it appeared millions of years ago. There would be a substantial delay in communications between Earth and astronauts on the Moon at the speed of light.

To know more about vacuum,

https://brainly.com/question/24189092

#SPJ4

A recurrent offender is present at work when two crime scene profiles match. This DNA evidence may be used by the police to support other evidence and aid in a criminal prosecution.

Complete DNA profiles provide extremely reliable matches and can be used to prove a suspect's guilt or innocence in a criminal case. After being put into a gel and exposed to an electrical field, the DNA fragments are electrophoretically sorted into different bands. To make these bands visible to imaging methods, a radioactive dye can be used to color them.

DNA fingerprints are produced via gel electrophoresis using samples taken from crime scenes and suspects. A similarity between samples identifies the criminal suspect.

Learn more about electrophoresis Visit: brainly.com/question/20782240

#SPJ4

When two crime scene profiles match, a repeat offender is present at work. The authorities may use this DNA proof to back up other evidence and build a criminal case.

A suspect's guilt or innocence in a criminal case can be established using whole DNA profiles, which offer incredibly reliable matches. The DNA fragments are electrophoretically separated into distinct bands after being placed in a gel and subjected to an electrical field. These bands can be coloured with a radioactive dye to make them apparent to imaging techniques.

Gel electrophoresis is used to create DNA fingerprints from samples obtained from crime scenes and suspects. The criminal suspect is identified by similarities between samples.

For such more question on crime scene

https://brainly.com/question/27031267

#SPJ4

The piston is the most important part of the brake caliper, which is a crucial part of the entire brake system. In order to stop your car, pistons must force the brake pads to make contact with the brake rotor.

The parking brake or emergency brake is typically fastened to the back wheels of a vehicle. The parking brake is typically connected to the rear drum brakes on vehicles with them using cables, as seen in Figure 14-10. Integral parking brakes are what they are known as.

It is a "motor-on-caliper" technology that operates the caliper without the use of a separate parking cable by integrating an actuator into the caliper located on the back wheel. The existing water/foot parking lever has been eliminated, and now a single button can be used to accomplish the parking function.

For those who are unaware, a parking brake that is integral means that your caliper piston serves two purposes. When you push the brake pedal, pressure is first applied to the brake pads. Second, when you use the parking brake, a ratchet mechanism applies pressure.

To learn about piston

https://brainly.com/question/21852769

#SPJ4

The parametric equation for the line of sight between the tanks can be represented as: x(t) = 385 + 410t, y(t) = 870 - 245t, z(t) = 567 + 30t

The line of sight between two points can be represented as a vector that starts at one point and ends at the other point. To find the parametric equation of the line of sight, we can subtract the starting point from the ending point to find the direction vector and then add it to a starting point multiplied by the parameter 't'.

Given that tank A is positioned at point (385, 870, 567) and tank B is positioned at point (795, 625, 597), the direction vector can be calculated as follows:

(795, 625, 597) - (385, 870, 567) = (410, -245, 30)

x(t) = 385 + 410t,

y(t) = 870 - 245t

z(t) = 567 + 30t

The parameter 't' can have any real value and determines the position along the line of sight.

To know more about parametric equation, here

https://brainly.com/question/29145287

#SPJ4

They'll be moving at the same speed when they reach the street.Weight (W), which is a force exerted on all objects on Earth by gravity, is a force.

Weight (W), which is a force exerted on all objects on Earth by gravity, is a force. A body can only accelerate through gravity (g) when it is falling freely. Because of this, velocity increases.

Weight (W), which is a force exerted on all objects on Earth by gravity, is a force.

As a result of gravity, both objects' velocities will alter.

This equation yields the same velocity for both items when one is hurled up and the other down:

where v is the end speed, v0 is the starting speed, h is the height difference between the building and the street, and g is the acceleration brought on by gravity.

Assuming upward speed to be positive.

They'll be moving at the same speed when they reach the street.

To learn more about speed refer to:

https://brainly.com/question/13943409

#SPJ4

(a) The energy-system diagram is shown in the picture attached.

(b) The heat energy added is 86,295 Joule.

(c) It takes 144 seconds to complete the process.

We solve the problem with the formula for heat energy.

Heat is the energy that is transferred from higher to lower temperature. The quantity of heat energy (also called thermal energy) can be calculated by

A 150 g piece of ice is converted from -15°C to 50°C in a hot pot. The power rate is 600 Watts.

a. Make the energy-system diagram!

b. Total heat energy added! (Q total)

c. Time to complete the process! (t)

The diagram picture is shown in the attachment. The piece of ice is heated from -15 degrees Celsius to zero by the energy of Q₁. When it reaches zero temperature, the ice is melted by the energy of Q₂. After all the solid ice melts, the liquid water continues to rise in temperature up to 50 degrees Celsius by the energy of Q₃.

The scientific data shows

The total heat energy absorbed is

Qt = Q₁ + Q₂ + Q₃

Qt = mcΔT (ice) + mL (melting) + mcΔT (water)

Qt = m(c_ice × ΔT + L_fusion + c_water × ΔT)

Qt = 150[0.5 × (0-(-15)) + 80 + 1 × (50-0)]

Qt = 150[7.5) + 80 + 50]

Qt = 150[137.5]

Qt = 20,625 calories

Convert the unit from calories to Joule!

Qt = 20,625 × 4.184 Joule

Qt = 86,295 Joule

The time taken to complete the entire process would be

P = Q/t

600 = 86,295/t

t = 86,295/600

t ≈ 144 seconds

Hence, the process in the diagram as shown in the picture attached has the total heat energy of 86,295 Joule. It will take 144 seconds to complete the process.

Learn more about heat energy here:

brainly.com/question/898227

#SPJ4

true, The rate at which a fluid deforms in response to a shear stress is referred to as its dynamic viscosity. It is a measurement of a fluid's resistance to deformation, and the Greek letter mu () is frequently used to represent it.

Absolute viscosity, commonly referred to as dynamic viscosity, is a measurement of a fluid's flow resistance. The amount of internal friction that a fluid possesses dictates how much force is necessary to move the fluid; this is a characteristic of the fluid. The amount of internal friction and force needed to move a fluid increases with its viscosity. The Greek letter mu () is frequently used to represent dynamic viscosity, which is quantified in units called pascal-seconds (Pas). It depends on temperature and pressure, and it may be influenced by things like the presence of suspended particles, dissolved gases, and fluid flow velocity. Pressure decreases may be calculated using dynamic viscosity.

learn more about dynamic viscosity here:

https://brainly.com/question/30264313

#SPJ4

The position and velocity of the particle are [tex]x(t) = 2t^2 + 24[/tex] and [tex]v(t) = 4t[/tex]

The problem states that the acceleration of a particle is directly proportional to the square of the time, which means that the equation for acceleration (a) is of the form [tex]a = k*t^2[/tex], where k is a constant.

Given that the position of the particle at t = 0 is x = 24m, we can use this to find the initial velocity (v0) using the equation: [tex]x = x0 + v0t + 1/2a*t^2[/tex].

Since we know that x = 24m at t = 0, we can substitute these values into the equation and get:

[tex]24 = 24 + v00 + 1/2k*0^2[/tex]

This simplifies to v0 = 0.

Now, we can use the information that at t = 6s, x = 96m and v = 18m/s to find the value of k. We know that [tex]x = x0 + v0t + 1/2at^2[/tex] and v = v0 + at.

So we can substitute these values into the equation and get:

[tex]96 = 24 + 0 + 1/2k6^2 = 24 + 1/2k36[/tex]

18 = 0 + k*6

Solving the above two equations, we get k = 4.

So the equation for acceleration is [tex]a = 4*t^2[/tex].

We can use this equation to find the equations for position and velocity by using the following formulas:

[tex]x(t) = x0 + v0t + 1/2at^2[/tex]

[tex]v(t) = v0 + at[/tex]

Substituting the values we know, we get:

[tex]x(t) = 24 + 0 + 1/2*(4t^2) = 2t^2 + 24[/tex]

[tex]v(t) = 0 + 4t = 4t[/tex]

So, the position and velocity of the particle are given by [tex]x(t) = 2t^2 + 24[/tex]and [tex]v(t) = 4t[/tex] respectively.

To learn more problems on position and velocity:

https://brainly.com/question/14298562

#SPJ4

The changes that would make the water balloon more likely to pop is: to use a liquid that has a lower heat capacity than water to use a thicker balloon. The correct options are B and C.

What is heat capacity? Heat capacity or also known as thermal capacity is a physical property of matter, defined as the amount of heat to be supplied to an object to produce a unit change in its temperature.

So, Using a liquid that has a lower heat capacity than water and using a thicker balloon will make the water balloon more likely to pop. We know now that heat capacity or specific heat is the amount of heat per unit mass that is required to raise the temperature by 1°C.

This is helpful in determining the processing temperatures along with the amount of heat required for processing and could be helpful for differentiating between two polymeric composites.

Learn more about heat capacity at: http://brainly.com/question/29313493

#SPJ4

If the car decelerates uniformly along the curved road from 25 m>s at a to 15 m>s at c. The acceleration of the car at b is 1.18m/s²

We are given the speed of the car at point A is Va= 25 m/s, and the speed of the car at point C is Vc= 15 m/s.

We have the distance between points A and B as dAB = 250 m

We have the distance between points A and B as dAC = 250 m + 50 m= 300m

We have the distance between points A and B as dBC = 50m

We have the radius of the track as βB = 300m

The formula to calculate the tangential acceleration of the car is,

                              (vc)² = (vA)² + 2at (dAC)

Substitute the values in the above expression.

                           (15 m/s)² = (25 m/s)² + 2at (300m)

                                      at = - 0.67 m/s²

The formula to calculate the velocity of the car at point B is,

                                    (vB)²=  (vA)² + 2at (dAB)

Substitute the values in the above expression.

                      (vB)²= (25 m/s)² + 2( - 0.67 m/s) (250m)

                                         vB = 17.03 m/s

The formula to calculate the normal acceleration of the car is,

                                  an = (vB)²÷β B

Substitute the values in the above expression.

                             an= (17.03m/s)² ÷ 300m

                             an = 0.97 m/s²

The formula to calculate the acceleration of the car is,

                               a=√ (at)² + (an)²

Substitute the values in the above expression.

                       a = √ (- 0.67 m/s)² + (0.97 m/s²)²

                                  a = 1.18 m/s²

Therefore, the answer is 1.18 m/s²

To know more about acceleration:

https://brainly.com/question/28601338

#SPJ4

The concept of Search, Setup, and Smooth applies to motorcycle riding in the following way:

Search: This refers to the rider's ability to scan the road ahead and anticipate potential hazards, such as turns, traffic, and other obstacles. This is essential for safe riding as it allows the rider to make adjustments to their speed, position, and trajectory in advance.

Setup: This refers to the rider's body position and the setup of the motorcycle. This includes the rider's posture, the position of their feet on the pegs, and the position of their hands on the handlebars. A proper setup allows the rider to maintain stability and control of the motorcycle.

Smooth: This refers to the rider's ability to make smooth and controlled movements on the motorcycle. This includes smooth braking, accelerating, and turning. Smooth riding helps to maintain stability and control, and reduces the risk of accidents.

The Search, Setup, and Smooth concept is a useful framework for thinking about motorcycle riding, as it highlights the importance of awareness, body position, and control in maintaining safety and stability on the road.

In summary,  It emphasizes the rider's ability to anticipate hazards, maintain proper posture and motorcycle setup, and make smooth controlled movements.

Learn more about motorcycle from

https://brainly.com/question/28840082

#SPJ1

Press Alt and 0176 on your keyboard. Please take note that this technique only functions on keyboard shortcut with a 10-key numeric pad.

To learn more about keyboard shortcut from the given link

https://brainly.com/question/12531147

#SPJ1

C) As shorter wavelength illumination and better quality lenses are used, magnification will increase and the limit of resolution will increase.

Wavelength illumination is a way of measuring the intensity of a light source in terms of the wavelength of the light being emitted.

Light microscopes use light of different wavelengths and high-quality lenses to magnify and enhance images. Shorter wavelength illumination, such as UV light, can provide greater resolution because it has a higher frequency than longer wavelengths, such as visible light. Additionally, higher quality lenses provide greater magnification and allow for a larger field of view. Thus, as shorter wavelength illumination and better quality lenses are used, magnification will increase and the limit of resolution will also increase.

To learn more about wavelength illumination
https://brainly.in/question/35746
#SPJ4

(a) The area of the leaf is  0.064 m².

(b) The length of the fiber is 10,359.2 m.

The area of the leaf is calculated from the volume of the leaf, while the volume of the leaf is calculated from the density and mass of the leaf.

V = m / ρ

where;

V = ( 4.295 g ) / ( 19.32 g/cm³ )

V = 0.22 cm³ = 0.22 x 10⁻⁶ m³

Ah = V

A = V / h

where;

A = ( 0.22 x 10⁻⁶ m³ ) / ( 3.449 x 10⁻⁶ m )

A = 0.064 m²

The length of the fiber is calculated as follows;

V = πr²h

h = V / πr²

h = ( 0.22 x 10⁻⁶ m³ ) / ( π x 2.6 x 10⁻⁶ m x 2.6  x 10⁻⁶ m )

h = 10,359.2 m

Learn more about area here: https://brainly.com/question/25292087

#SPJ1

By dividing an object's charge by its basic charge, one can calculate the quantity of extra electrons (or protons, in the case of positive charges), in a system.

To learn more about charge refer to:

https://brainly.com/question/25922783

#SPJ1

The clearest example of what Erik Erikson believed a person might go through in early adulthood Mohammed has tried dating a few times but has not had much luck, so he has decided to give it up.

The way in which Erikson's theory handled development over the lifetime, including old age, set it apart from many others. We are driven to investigate intimate connections as young people because we want to build our own relationships. Young adulthood, the sixth stage in Erikson's theory of psychosocial development, occurs between the ages of 18 and 40. The clearest example of what Erik Erikson believed a person might go through in early adulthood Mohammed has tried dating a few times but has not had much luck, so he has given up.

Learn more about Adulthood

brainly.com/question/10477610

#SPJ4

When the orbital speed of satellite A is eighty-three times that of satellite B, the period ratio Ta/Tn equals 83:1.

The orbital speed of an astronomical body or object in a gravitationally bound system is the speed at which it circles around the barycenter or, if one body is substantially more massive than the other entities in the system combined, its speed relative to the center of mass of the most massive body. The object's orbital speed is the rate at which it circles around the barycenter of a system, which is generally a big body. The earth's orbital speed around the sun is 108,000 km/h. The orbital speed of a planet varies with its distance from the Sun. The greater the strength of the Sun's gravitational attraction on a planet, the quicker it travels.

Here,

The orbit of the two satellites is circular.

Also, Orbital speed of A is 2 times the orbital speed of B.

vₐ=2vₙ

v=2T

vₐ=2Tₐ

2vₙ=2Tₐ

vₙ=2Tₙ

Tₐ/Tₙ=83/1

The ratio Tₐ/Tₙ of the periods of the satellites is 83:1 when the orbital speed of satellite A is eighty-three times that of satellite B.

To know more about orbital speed,

https://brainly.com/question/13260980

#SPJ4

The following situations use no torque. C=D, A,B,E,C,D.

Size is referred to as magnitude. A automobile is traveling more quickly than a bike, for instance, when it comes to speed. In this case, the car is moving faster than the bike by a larger margin. It reveals the direction or size, whether absolute or relative, in which an object moves.

The vector's length determines its magnitude. The symbol for the vector's magnitude is a. To learn more about a vector's magnitude, see to its introduction. Vector magnitude formulas for two dimensions.

To know more about Magnitude visit:

https://brainly.com/question/15681399

#SPJ4

A 130 gg air-track glider is attached to a spring. the glider is pushed in 11.2 cmcm and released. a student with a stopwatch finds that 14.0 oscillations take 9.00 ss .

The period (T) of a spring-mass system can be calculated using the formula:

T = 2 * pi * sqrt(m / k)

where T is the Time period in seconds, m is the mass of the glider in kilograms, and k is the spring constant in N/m.

The frequency (f) of a spring-mass system can be calculated using the formula:

f = 1 / T

where f is the frequency in hertz (Hz) and T is the period in seconds.

The angular frequency (w) is given by :

w = 2 * pi * f

The amplitude (A) of a spring-mass system can be calculated using the formula:

A = x / (2 * pi)

where x is the displacement in meters.

You can use these formulas to find the Period, frequency, angular frequency and amplitude of the given spring-mass system.

Keep in mind that the displacement of the spring (11.2 cm) needs to be converted to meters (0.112 m) before calculating the amplitude.

Also, you have to convert the mass of the glider from gg to kg before applying the formulas.

Learn more about angular frequency here:

https://brainly.com/question/29107224

#SPJ4

The force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.

Force is an influence that can cause an object to change its motion, direction, shape, or stress state. It is a vector quantity, meaning it has both magnitude and direction.

a) The work done against gravity is equal to the force of gravity multiplied by the distance the block was lifted:
Work = F × d = 50 N × d
Since the distance is not given, we cannot calculate the exact amount of work done.

b) The potential energy of the block at point A is equal to the force of gravity (F) multiplied by the height (h) at which the block was initially located:
UA = F × h
Similarly, the potential energy of the block at point C can be calculated as:
UC = F × 0
Since the block is lifted from A to C, the difference of potential energies is given by:
∆U = UA − UC = F × h − 0 = F × h
Since the force F is equal to 50 N and the height h is not given, we cannot calculate the exact value of ∆U.

To learn more about force
https://brainly.com/question/12785175
#SPJ4