All three options are incredibly small, but water molecules are the smallest, followed by bacteria, then viruses, and then viruses. So the correct order of increasing volume is (c) water molecule, (a) bacterium, (b) virus.
The smallest of the three alternatives are water molecules, which have a diameter of only 0.3 nanometers.
On the other hand, bacteria are significantly bigger and can be anywhere from 0.5 and 5 micrometres in size. Because of this, bacteria are both much larger than water molecules and far tiny than what the human eye can see without a microscope.
Viruses are typically even tiny than bacteria, measuring between 0.02 and 0.3 micrometres. Even though they are occasionally considered the smallest living things, viruses are nonetheless bigger than water molecules.
To know more about bacterium, virus and water,
https://brainly.com/question/30170304
https://brainly.com/question/30307005
List the following ions in order from the greatest number of electrons to the smallest number of electrons: nitrite (NO2-), sulfite (SO32-), ferric iron (Fe3+), chlorate (ClO3-). If a tiebreaker is needed, list the molecule with the smaller overall charge first.
Chlorate, Sulfite, Nitrite, and Ferric ion
Ferric iron carries a 3+ charge so it has 23 electrons, nitrite carries a 1- charge so it has 24 electrons, chlorate carries a 1- charge so it has 42 electrons, and sulfite carries a 2- charge so it also has 42 electrons. The question stem says that if a tiebreaker is needed, list the molecule with the smaller overall charge first. Chlorate has a 1- charge and sulfite has a 2- charge, so chlorate comes before sulfite.
The Chlorate (ClO3-), Sulfite (SO32-), Nitrite (NO2-), Ferric ion (Fe3+) To list these ions in order from the greatest number of electrons to the smallest, we need to first determine the number of electrons for each ion. Nitrite (NO2-) Nitrogen has 7 electrons, and each oxygen has 8 electrons. Since it carries a 1- charge, it gains 1 extra electron. So, NO2- has 7 + 8 + 8 + 1 = 24 electrons.
The Ferric iron Fe3+ Iron has 26 electrons, but with a 3+ charge, it loses 3 electrons. So, Fe3+ has 26 - 3 = 23 electrons. Sulfite SO32- Sulfur has 16 electrons, and each oxygen has 8 electrons. With a 2- charge, it gains 2 extra electrons. So, SO32- has 16 + 8 + 8 + 8 + 2 = 42 electrons. Chlorate ClO3- Chlorine has 17 electrons, and each oxygen has 8 electrons. With a 1- charge, it gains 1 extra electron. So, ClO3- has 17 + 8 + 8 + 8 + 1 = 42 electrons. Since chlorate and sulfite both have 42 electrons, we need a tiebreaker. The question states to list the molecule with the smaller overall charge first. Chlorate has a 1- charge, while sulfite has a 2- charge. Therefore, chlorate comes before sulfite. So, the final order is Chlorate ClO3-, Sulfite SO32-, Nitrite NO2-, Ferric ion Fe3+.
learn more about Ferric here.
https://brainly.com/question/9496279
#SPJ11
Calculate the pH of the solution that results from each of the following mixtures.
PART A---- 150. 0 mL of 0. 26 M HF with 230. 0 mL of 0. 32 M NaF The Ka of hydrofluoric acid is 6. 8 x 10−4. Express your answer using two decimal places.
PART B---- 170. 0 mL of 0. 11 M C2H5NH2 with 270. 0 mL of 0. 22 M C2H5NH3Cl. Express your answer using two decimal places
The pH of the mixture is 3.82. The pH of the solution is 9.71.
PART A:-
pH = pKa + log([A-]/[HA])
moles of HF = 0.26 mol/L × 0.150 L = 0.039 mol
moles of NaF = 0.32 mol/L × 0.230 L = 0.074 mol
The total volume of the mixture is:
Vtot = 150.0 mL + 230.0 mL = 380.0 mL = 0.380 L
The molarities of HF and NaF are therefore:
[HF] = 0.039 mol / 0.380 L = 0.103 M
[NaF] = 0.074 mol / 0.380 L = 0.195 M
Now we can calculate the ratio of [A-]/[HA]:
[A-]/[HA] = [F-]/[HF] = 0.195 M / 0.103 M = 1.893
Finally, we can use the pKa of HF to calculate the pH:
pKa = -log(Ka) = -log(6.8 × [tex]10^{-4}[/tex]) = 3.17
pH = 3.17 + log(1.893) = 3.82
PART B:-
pH = pKa + log([A-]/[HA])
The pKa of methylammonium ion is 10.75. The initial concentration of ethylamine is:
[ethylamine] = 0.11 M × 170.0 mL / 440.0 mL = 0.043 M
The initial concentration of ethyl ammonium ion is:
[ethylammonium ion] = 0.22 M × 270.0 mL / 440.0 mL = 0.136 M
The ratio of [A-]/[HA] is:
[A-]/[HA] = [ethylamine] / [ethylammonium ion] = 0.043 M / 0.136 M = 0.316
Therefore,
pH = 10.75 + log(0.316) = 9.71
pH is a measure of the acidity or basicity of a solution, defined as the negative logarithm of the concentration of hydrogen ions (H+) in the solution. The pH scale ranges from 0 to 14, with 0 being the most acidic, 7 being neutral, and 14 being the most basic or alkaline.
In water, which is neutral, the concentration of H+ ions and hydroxide ions (OH-) are equal, resulting in a pH of 7. When an acid is added to water, it donates H+ ions, increasing their concentration and lowering the pH below 7. Conversely, when a base is added, it accepts H+ ions, decreasing their concentration and raising the pH above 7. The pH of a solution is an important factor in many chemical reactions and biological processes.
To learn more about pH visit here:
brainly.com/question/491373
#SPJ4
A 10.0-g sample of krypton has a temperature of 25 °C at 563 mmHg. What is the volume, in milliliters, of the krypton gas?
Express your answer to three significant figures and include the appropriate units.
The volume, in milliliters, of the krypton gas is 523ml.
The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as
PV = nRT
where,
P = Pressure
V = Volume
T = Temperature
n = number of moles
Given,
Mass = 10g
Pressure = 563 mm Hg
Temperature = 298 K
moles of Kr =mass / atomic mass
= 10 / 84
= 0.119 moles
PV = nRT
563 × V = 0.119 × 8.314 × 298
V = 0.523L = 523ml
Learn more about Ideal Gas law, here:
https://brainly.com/question/28257995
#SPJ1
A chemist titrates 160.0mL of a 0.6073M pyridine C5H5N solution with 0.5979M HBr solution at 25°C . Calculate the pH at equivalence. The pKb of pyridine is 8.77 . Round your answer to 2 decimal places. Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of HBr solution added
The pH at equivalence is 8.77.
The balanced chemical equation for the reaction between pyridine and HBr is:
C₅H₅N (aq) + HBr (aq) → C₅H₅NH + Br⁻ (aq)
The stoichiometry of the reaction is 1:1, which means that at equivalence, all of the pyridine will have reacted with the HBr. We can use the concentration of the HBr solution and the initial volume of the pyridine solution to calculate the number of moles of HBr added:
n(HBr) = C(HBr) × V(HBr) = 0.5979 mol/L × (V(eq) - 160.0 mL)
where V(eq) is the total volume of the solution at equivalence.
At equivalence, the number of moles of HBr added is equal to the number of moles of pyridine in the initial solution:
n(HBr) = n(C₅H₅N) = C(C₅H₅N) × V(C₅H₅N) = 0.6073 mol/L × 160.0 mL / 1000 mL = 0.097168 mol
Therefore, we can solve for V(eq):
V(eq) = n(HBr) / C(HBr) + 160.0 mL = 0.097168 mol / 0.5979 mol/L + 160.0 mL = 320.52 mL
The concentration of the pyridine cation C₅H₅NH⁺ at equivalence is equal to the concentration of the pyridine anion C₅H₅N in the initial solution, since they have the same stoichiometric coefficient in the balanced equation:
C(C₅H₅NH⁺) = C(C₅H₅N) = 0.6073 mol/L
The pKa of pyridine can be related to the pKb by the equation:
pKa + pKb = 14
Therefore, the pKb of pyridine is:
pKb = 14 - 8.77 = 5.23
At equivalence, the reaction produces an acidic solution, since the HBr is a strong acid and the pyridine cation is a weak base. The pH can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
where A⁻ is the pyridine anion C₅H₅N and HA is the pyridine cation C₅H₅NH⁺.
At equivalence, the concentrations of [tex]A^-[/tex] and HA are equal, and the pH simplifies to:
pH = pKa + log(1) = pKa = 8.77
For more such questions on pH.
https://brainly.com/question/15187703#
#SPJ11
why was it necessary to make a new calibration curve for week 2? group of answer choices nitrites were tested in week 2, not nitrates. new nitrite calibration standards must be used to re-calibrate the ise. additional solutes in the environmental samples will affect the ise readings so new standards must be prepared with tap water instead. the ph of the environmental samples is much lower than the standards from week 1 so new standards at lower ph must be prepared. in order to keep any environmental variables minimized and to reduce variation with the labquest and ise. the concentrations in the stock solution can increase as time passes.
The reason why it was necessary to make a new calibration curve for week 2 is because nitrites were tested in week 2, not nitrates. Nitrites and nitrates are different types of solutes, and therefore require different calibration standards.
To ensure accurate and precise measurements, new nitrite calibration standards must be used to re-calibrate the ISE. Additionally, there may be additional solutes in the environmental samples that will affect the ISE readings, so new standards must be prepared with tap water instead. The pH of the environmental samples may also be much lower than the standards from week 1, so new standards at a lower pH must be prepared to account for this difference. In order to keep any environmental variables minimized and to reduce variation with the LabQuest and ISE, it is necessary to re-calibrate the ISE for each week. Finally, concentrations in the stock solution can increase as time passes, which may affect the accuracy of the measurements. By creating a new calibration curve for week 2, we can ensure that our measurements are accurate and reliable.
for more such questions on calibration
https://brainly.com/question/30782043
#SPJ11
Which of the following electron configurations of neutral atoms represent excited states?a. 1s22s22p63s23p63d21s22s22p63s23p63d2.b. [Xe]6s24f4[Xe]6s24f4.c. 2s22s2.d. [Kr]5s14d6[Kr]5s14d6.e. [Ar]4s23d3[Ar]4s23d3.
The Option a and e represent excited states because they have electrons in higher energy levels than the ground state configuration.
The ground state electron configuration for the element with atomic number 26 (iron) is [tex]1s22s22p63s23p63d64s2[/tex]. In option a, the electron configuration is [tex]1s22s22p63s23p63d21s22s22p63s23p63d[/tex]2, which shows that one electron from the 4s orbital has been excited to the 3d orbital, resulting in an excited state.In option e, the ground state configuration for the element with atomic number 26 is [Ar]3d64s2. The given configuration [Ar]4s23d3 shows that one electron from the 4s orbital has been excited to the 3d orbital, resulting in an excited state.Option b represents the electron configuration of the ground state of the element with atomic number 60 (neodymium), option c represents the ground state of the element with atomic number 4 (beryllium), option d represents the ground state of the element with atomic number 29 (copper).For more such question on ground state configuration
https://brainly.com/question/16908172
#SPJ11
Steric strain occurs when parts of molecules are Choose. And their electron clouds Choose. Each other. Molecules with steric strain are Choose. Than those without strain
The correct option is B, A steric strain occurs when parts of molecules are too close to each other, and their electron clouds overlap each other.
An electron is a negatively charged subatomic particle that orbits the positively charged nucleus of an atom. It has a mass of approximately 9.109 × [tex]10^{-31}[/tex] kilograms, making it nearly 1/1836 the mass of a proton. Electrons are essential to the structure and behavior of atoms and molecules, as they determine how they interact with each other and with external forces.
Electrons have discrete energy levels, and they can gain or lose energy by absorbing or emitting photons of specific wavelengths. This property is the basis of various chemical and physical phenomena, such as atomic spectroscopy and photochemistry. In addition to their role in atomic and molecular structure, electrons play a crucial role in electricity and electronics.
To learn more about Electron visit here:
brainly.com/question/24372542
#SPJ4
when miranda pushes her school's recycling bin , the force she uses isnt enough to make the bin move.
what is acting on the bin to keep her from moving it
The opposite force called as inertia is pushing against the bin and preventing it from moving. An object's propensity to resist modifications to its motion is known as inertia.
Because of the bin's inertia and Miranda's insufficient effort, the bin is not moving in this instance. In other words, the trashcan stays still because the force of inertia is larger than the force Miranda is exerting.
An object's propensity to resist changes in motion, either by remaining at rest or by continuing to travel in a straight path at a constant speed, is known as inertia.
Given the situation, the bin is not moving because Miranda is exerting more force than the force of inertia. The power Miranda exerts is insufficient to overcome the bin's inertia and start it moving.
The relationship between inertia and mass is that the inertia increases with mass. In the instance of the bin, it can have a big mass, necessitating a sizable force to move it. Stronger pressure from Miranda might be able to overcome the bin's inertia and cause it to move.
Learn more about inertia at :
https://brainly.com/question/11049261
#SPJ1
balance each of the following equations
1. barium + sulfur ➡️ barium sulfide
2. oxygen + nitrogen ditelluride ➡️ nitrogen dioxide + tellerium dioxide
3. hydrogen phosphate + magnesium oxalate ➡️ magnesium phosphate + hydrogen oxalate
Chemical equations are symbols and chemical formulas that depict a chemical reaction symbolically.
Thus, With a plus sign separating the entities in both the reactants and the products and an arrow pointing in the direction of the products to indicate the direction of the reaction, the reactant entities are given on the left and the product entities are given on the right.
Chemical formulas can be mixed, structural (represented by pictures), or both. The absolute values of the stoichiometric numbers are shown as coefficients next to the symbols and formulas of the various entities.
A chemical equation is made up of a list of reactants (the chemicals used to start the reaction) on the left, an arrow symbol, and a list of products on the right.
Thus, Chemical equations are symbols and chemical formulas that depict a chemical reaction symbolically.
Learn more about chemical equation, refer to the link:
https://brainly.com/question/30087623
#SPJ1
an emission spectrum for a hypothetical atom with a single electron is shown above. the wavelengths for the three lines a , b , and c are 248nm , 413nm , and 620nm , respectively. which energy-level diagrams could represent the structure of this atom? select two answers.
Based on the given emission spectrum, we can deduce that the hypothetical atom with a single electron has three energy levels. Diagrams that satisfy the condition that the atom has three energy levels corresponding to the wavelengths of the emitted photons are:
1) The first diagram has energy levels of -0.5 eV, -1.13 eV, and -1.77 eV, respectively.
2) The second diagram has energy levels of -0.5 eV, -0.87 eV, and -1.15 eV, respectively.
The energy difference between these levels corresponds to the wavelengths of the emitted photons, as per the relationship E = hc/λ, where E is energy, h is Planck's constant, c is the speed of light, and λ is wavelength.
Two possible energy-level diagrams that could represent the structure of this atom are as follows:
1) The first diagram has energy levels of -0.5 eV, -1.13 eV, and -1.77 eV, respectively. These energy levels correspond to the wavelengths of the emitted photons: 248 nm, 413 nm, and 620 nm. The transitions between these levels are indicated by arrows, and the energy of the emitted photons is shown in eV. This diagram implies that the atom has a ground state and two excited states.
2) The second diagram has energy levels of -0.5 eV, -0.87 eV, and -1.15 eV, respectively. These energy levels also correspond to the wavelengths of the emitted photons: 248 nm, 413 nm, and 620 nm. The transitions between these levels are indicated by arrows, and the energy of the emitted photons is shown in eV. This diagram implies that the atom has a ground state and two metastable states.
Both of these diagrams satisfy the condition that the atom has three energy levels corresponding to the wavelengths of the emitted photons, and are therefore consistent with the given emission spectrum.
for more such question on emission spectrum
https://brainly.com/question/24213957
#SPJ11
What is a special concern in deep anode beds?
A) flow of the current upstream
B) blockage of backfill due to tight soils
C) pH scale
D) blockage of gas due to tight soils such as clay and silt at the anodes
A special concern in deep anode beds is the potential for blockage of gas due to tight soils, such as clay and silt, at the anodes.
As the electrical current flows through the anodes, it produces gas that must be able to escape to prevent blockages that can affect the performance of the anode bed. Tight soils can impede gas flow, leading to accumulation and eventual blockage. This is a significant concern as it can lead to reduced anode efficiency and corrosion control, and potentially costly maintenance or replacement of the anode bed. Therefore, careful attention must be paid to soil conditions and proper installation techniques to ensure that gas flow is not hindered in deep anode beds. Additionally, monitoring of gas accumulation and pressure levels is necessary to identify and address any potential issues in a timely manner.
learn more about anode Refer: https://brainly.com/question/13958755
#SPJ11
A balloon has a volume of 4.3 liters at 26.4 C. The balloon is then heated to a temperature of 109.4 C. What is the volume of the balloon after heating?
The volume of the balloon after heating is 5.47 liters.
To determine the volume of the balloon after heating, we can use Charles's Law, which states that the volume of the gas is directly proportional to its temperature when the pressure and the amount of gas are held constant.
Mathematically, Charles's Law can be expressed as;
V₁ / T₁ = V₂ / T₂
where; V₁ = Initial volume of the gas (before heating)
T₁ = Initial temperature of the gas (before heating)
V₂ = Final volume of the gas (after heating)
T₂ = Final temperature of the gas (after heating)
Given; V₁ = 4.3 liters
T₁ = 26.4°C (which needs to be converted to Kelvin by adding 273.15)
T₂ = 109.4°C (which needs to be converted to Kelvin by adding 273.15)
Converting temperatures to Kelvin;
T₁ = 26.4 + 273.15 = 299.55 K
T₂ = 109.4 + 273.15 = 382.55 K
Plugging the values into Charles's Law equation;
V₁ / T₁ = V₂ / T₂
4.3 / 299.55 = V₂ / 382.55
Solving for V₂ (final volume of the balloon after heating):
V₂ = (4.3 / 299.55) × 382.55
V₂ ≈ 5.47 liters
To know more about Charles's Law here
https://brainly.com/question/16927784
#SPJ1
determine the ph of a solution that is 3.90 %koh by mass. assume that the solution has a density of 1.01 g/ml . finding ph
The pH of a 3.90% KOH by mass solution with a density of 1.01 g/ml is 1.15.
The pH of a solution can be determined by calculating the molarity of the solute, in this case potassium hydroxide (KOH), and then using the appropriate equation to calculate the pH.
For a solution of 3.90% KOH by mass, the molarity can be found by multiplying the mass percent by the density of the solution (1.01 g/ml) and then dividing by the molar mass of KOH (56.1 g/mol).
This yields a molarity of 0.07 moles/L. The pH of a solution with this molarity can be calculated using the equation pH = -log([KOH]), where [KOH] is the molarity of KOH. Plugging in 0.07 moles/L for [KOH] yields a pH of 1.15. Therefore, the pH of a 3.90% KOH by mass solution with a density of 1.01 g/ml is 1.15.
Know more about molarity here
https://brainly.com/question/8732513#
#SPJ11
Calculate the mass of sodium tetraoxosulphate(vi) formed when 0. 5mole of sodium hydroxide reacts with tetraoxosulphate
The mass of sodium tetraoxosulphate (VI) formed when 0.5 mole of sodium hydroxide reacts with tetraoxosulphate ions is 71.0 g.
To calculate the mass of sodium tetraoxosulphate (VI) formed, we first need to write a balanced chemical equation for the reaction between sodium hydroxide (NaOH) and tetraoxosulphate (VI) ions ([tex]SO4^2[/tex]-):
[tex]NaOH + H_{2}SO_{4} \rightarrow Na_{2}SO_{4} + 2H_{2}O[/tex]
From the balanced equation, we can see that 1 mole of NaOH reacts with 1 mole of [tex]H_{2}SO_{4}[/tex] to produce 1 mole of [tex]Na_{2}SO_{4}[/tex]. Therefore, the number of moles of [tex]Na_{2}SO_{4}[/tex] produced can be calculated using the following formula:
moles of [tex]Na_{2}SO_{4}[/tex] = moles of NaOH
Since we are given 0.5 moles of NaOH, we know that 0.5 moles of [tex]Na_{2}SO_{4}[/tex] will be produced.
To calculate the mass of [tex]Na_{2}SO_{4}[/tex] produced, we need to know its molar mass.
[tex]Na_{2}SO_{4}[/tex] molar mass = 2(Na atomic mass) + 1(S atomic mass) + 4(O atomic mass)
[tex]Na_{2}SO_{4}[/tex] molar mass = 2(23.0 g/mol) + 32.1 g/mol + 4(16.0 g/mol)
[tex]Na_{2}SO_{4}[/tex] molar mass = 142.0 g/mol
Now, we can use the following formula to calculate the mass of [tex]Na_{2}SO_{4}[/tex] produced:
mass = moles * molar mass
mass = 0.5 mol * 142.0 g/mol
mass = 71.0 g
Learn more about molar mass
https://brainly.com/question/22997914
#SPJ4
How many millimetres of rain falls in London in May?
Answer:
London gets about 55mm of rainfall on average in May.
Explanation:
Typically, there are about 15 days of rain during the month, but many of these days will be showers which means they are quick bursts of rain that happen throughout the day.
(4 pts) indicate if the solubility of baf2 will increase, decrease, or no change after adding the following compounds to a saturated baf2 solution. (write increase, decrease, or no change)
Adding NaF and Na2SO4 will decrease the solubility of BaF2 while adding HCl will increase its solubility
a) NaF: The solubility of BaF2 will decrease as adding NaF introduces F- ions into the solution which will react with Ba2+ ions to form BaF2(s), decreasing the amount of dissolved BaF2.b) HCl: The solubility of BaF2 will increase as HCl will react with BaF2(s) to form more Ba2+ ions and F- ions in the solution, increasing the amount of dissolved BaF2.c) NaNO3: The solubility of BaF2 will not change as NaNO3 does not react with BaF2 or its ions.d) Na2SO4: The solubility of BaF2 will decrease as adding Na2SO4 introduces SO42- ions into the solution which will react with Ba2+ ions to form BaSO4(s), decreasing the amount of dissolved BaF2.Overall, adding NaF and Na2SO4 will decrease the solubility of BaF2 while adding HCl will increase its solubility.For more such question on solubility
https://brainly.com/question/28202068
#SPJ11
Consider the atom whose electron configuration is [Ar]3d1 4s2.
Write the one or two-letter symbol for the element.
How many unpaired electrons in the ground state of this atom?
The one or two-letter symbol for the element is Ti (Titanium).
There is one unpaired electron in the ground state of this atom, which is located in the 3d subshell.
Explanation:
The electron configuration [Ar]3d1 4s2 indicates that the atom has a total of 22 electrons. The [Ar] part of the configuration represents the complete electron configuration of Argon (a noble gas) which has 18 electrons. The remaining 4 electrons are distributed among the 3d and 4s orbitals.
In the ground state, the 4s orbital is filled before the 3d orbital. This means that the 4s orbital contains two electrons, and the 3d orbital contains one electron. Since there is only one electron in the 3d orbital, it is unpaired.
Unpaired electrons are important because they are involved in chemical reactions and bonding. In this case, the unpaired electron in the 3d orbital of Titanium can participate in chemical reactions, forming bonds with other atoms or molecules.
Learn more about molecules here:
https://brainly.com/question/19922822
#SPJ11
Determine whether each of the following compounds is soluble or insoluble: Drag the appropriate items to their respective bins View Available Hint(s)
BaSo4
CoCO3
Na3PO4
Agl
BaSO₄ and CoCO₃ are insoluble, while Na₃PO₄ is soluble, and AgI is insoluble.
To determine whether each of the following compounds is soluble or insoluble, consider the general solubility rules. Here are the results for each compound:
1. BaSO₄ (Barium sulfate) - This compound is insoluble because most sulfate salts are soluble, but barium sulfate is an exception.
2. CoCO₃ (Cobalt(II) carbonate) - This compound is insoluble because most carbonate salts are insoluble, and cobalt(II) carbonate follows this rule.
3. Na₃PO₄ (Sodium phosphate) - This compound is soluble because most sodium salts are soluble, and sodium phosphate is no exception.
4. AgI (Silver iodide) - This compound is insoluble because most iodide salts are soluble, but silver iodide is an exception.
In summary, by determining we can conclude that the BaSO₄ and CoCO₃ are insoluble, while Na₃PO₄ is soluble, and AgI is insoluble.
To know more about the solubility refer here :
https://brainly.com/question/28170449#
#SPJ11
You have one test tube which contains a colorless solution that is either Cu Select a reagent that will allow you to differentiate between the two chemical species. +2 If the solution is Cu, what will happern when the reagent is added? +2 If the solution is Pb, what will happen when the reagent is added? Select one: a. hot water +2 If it is Cu, the solution will remain the same after adding the hot water. +2 If it is Pb, a white precipitate will form after adding the hot water Оь. НС! If it is Cu, a white precipitate will form after adding the HCl. +2 If it is Pb, the solution will remain the same after adding the HCl. с. К,CrOд +2 If it is Cu, a yellow precipitate will form after adding the K2CrO4 +2 If it is Pb, the solution turns yellow, but no solid will form after adding the K2CrO4. d. HCI +2 If it is Cu, the solution will remain the same after adding the HCl. +2 If it is Pb a white precipitate will form after adding the HCI
If you have a colorless solution in a test tube and you need to differentiate between the chemical species Cu and Pb, you can use a reagent to do so. Among the options provided, the reagent that will allow you to differentiate between the two species is K2CrO4.
If the solution is Cu, a yellow precipitate will form after adding K2CrO4. On the other hand, if the solution is Pb, the solution will turn yellow but no solid will form.If you choose to use HCl as the reagent, and the solution is Cu, a white precipitate will form after adding the HCl. However, if the solution is Pb, the solution will remain the same after adding the HCl.Alternatively, if you choose to use hot water as the reagent, and the solution is Cu, the solution will remain the same after adding the hot water. However, if the solution is Pb, a white precipitate will form after adding the hot water.
In summary, to differentiate between Cu and Pb in a colorless solution, you can use K2CrO4 as the reagent, which will result in a yellow precipitate for Cu and a yellow solution for Pb. Using HCl or hot water as the reagent will also allow you to differentiate between the two species, but the outcomes will be different depending on which species is present in the solution.
Learn more about chemical here
https://brainly.com/question/1222323
#SPJ11
Balance the following equation in basic solution using the lowest possible integers and give the coefficient of hydroxide ion.
AlH4-(aq) + H2CO(s) → Al3+ (aq) + CH3OH(aq)
The given chemical equation is an unbalanced redox reaction that takes place in basic solution. The oxidation state of Al changes from -1 to +3, while that of C changes from +2 to -2.
To balance the equation, we first balance the number of carbon and hydrogen atoms on each side by adding a coefficient of 2 in front of H₂CO. This gives:
AlH₄-(aq) + 2H₂CO(s) → Al₃+ (aq) + 2CH₃OH(aq)
Next, we balance the hydrogen and oxygen atoms in the equation by adding OH- ions. We add four OH- ions to the right-hand side of the equation to balance the hydrogen atoms, and two more OH- ions on the left-hand side to balance the oxygen atoms. This gives:
AlH4-(aq) + 2H₂CO(s) + 6OH-(aq) → Al₃+ (aq) + 2CH₃OH(aq) + 4H₂O(l)
The balanced equation has a coefficient of 6 for OH- ions, which indicates that 6 hydroxide ions are needed to balance the reaction in basic solution.
Learn more about oxidation state,
https://brainly.com/question/31688257
#SPJ4
assuming the temperature and the amount of gas are held constant, a plot of volume vs. pressure will give a: a. line b. parabola c. hyperbola d. none of the above
Assuming the temperature and amount of gas are held constant, a plot of volume vs. pressure will result in a hyperbola. This is based on Boyle's law, which states that at a constant temperature, the volume of a gas is inversely proportional to its pressure.
Mathematically, this relationship can be expressed as PV=k, where P is the pressure, V is the volume, and k is a constant. Rearranging this equation, we get V=k/P, which shows that as pressure increases, volume decreases proportionally. However, this relationship is not linear, but rather a hyperbolic curve. This is because as the volume decreases, the remaining gas molecules occupy a smaller space, leading to more collisions and increased pressure. Thus, a hyperbolic curve results, with the volume decreasing more rapidly at higher pressures. Therefore, the correct answer to the question is c. hyperbola.
Learn more about hyperbolic curve here:
https://brainly.com/question/13640680
#SPJ11
Bonds that form due to the attraction between oppositely charged atoms that have gained or lost electrons are called___________ bonds.
Bonds that form due to the attraction between oppositely charged atoms that have gained or lost electrons are called ionic bonds.
Ions with opposite charges are formed when one or more electrons are moved from one atom to another. This process creates ionic connections. An anion is a negatively charged ion, and a cation is a positively charged ion.
The two ions are joined in an ionic bond by their electrostatic attraction to one another. The magnitude of the charges on the ions and the separation between them affect the bond's strength.
Ionic compounds frequently have high melting and boiling temperatures because ionic bonds are typically quite strong.
For such more question on ionic bond:
https://brainly.com/question/977324
#SPJ11
experiment 1: what was the absorbance of the copper(ii) sulfate solution at 700 nm? select the closest answer. 0.517 0.034 1.320 0.351
To determine the absorbance of a copper(II) sulfate solution at 700 nm, you would need to conduct a spectrophotometric experiment.
Here's a step-by-step explanation:
1. Prepare a copper(II) sulfate solution with a known concentration. Copper(II) sulfate is a blue compound that forms a colored solution when dissolved in water.
2. Turn on the spectrophotometer and set the wavelength to 700 nm. A spectrophotometer is an instrument that measures the amount of light absorbed by a solution at a specific wavelength.
3. Calibrate the spectrophotometer using a blank (typically distilled water) to set the absorbance to zero.
4. Fill a cuvette with the copper(II) sulfate solution, and place it in the spectrophotometer.
5. Record the absorbance reading displayed by the spectrophotometer.
Unfortunately, without the actual data from the experiment, it's not possible for me to select the closest answer among the options you provided (0.517, 0.034, 1.320, 0.351). The absorbance value would depend on the specific concentration of the copper(II) sulfate solution used and the spectrophotometer's calibration.
However, you can follow the steps above to conduct the experiment and obtain the absorbance value yourself. Good luck!
For more information on copper(II) sulfate see:
https://brainly.com/question/31654282
#SPJ11
What is the molarity of a kci solution containing 0.75 moles of kci in 250 ml of solution (i will give brainliest)
The molarity of the KCI solution is 3 M.
To find the molarity of a KCI solution containing about 0.75 moles of KCI in 250 mL of solution, we need to use the below given formula:
Molarity (M) = moles of solute / liters of solution
Since we know that, the volume of the solution is given in milliliters, we need to convert it to liters by dividing by 1000:
250 mL / 1000 = 0.25 L
Now we can plug in the values:
Molarity (M) = 0.75 moles / 0.25 L = 3 M
Therefore, the KCI solution has the molarity of at most 3 M.
To know more about Molarity, here
brainly.com/question/8732513
#SPJ1
calculations of volumetric analysis ordinarily consist of transforming the quantity of titrant used (in chemical units) to a chemically equivalent quantity of analyte (also in chemical units) through use of a stoichiometric factor. use chemical formulas (no calculations required) to express this ratio for calculation of the percentage of (simplify your answer completely.) hydrazine in rocket fuel by titration with standard iodine. reaction: H2NNH2+2I2→N2(g)+4I−+4H+
The stoichiometric factor for the calculation of the percentage of hydrazine in rocket fuel by titration with standard iodine is: 1 mole of H2NNH2 : 2 moles of I2
In order to calculate the percentage of hydrazine in rocket fuel by titration with standard iodine, a stoichiometric factor is used to transform the quantity of titrant used into a chemically equivalent quantity of analyte.
For the given reaction, the stoichiometric ratio between hydrazine and iodine is 1:2, meaning that one mole of hydrazine reacts with two moles of iodine to produce four moles of iodide and four moles of hydrogen ions, as well as nitrogen gas.
Therefore, the stoichiometric factor for this calculation is 1 mole of H2NNH2 to 2 moles of I2, which allows for the determination of the percentage of hydrazine in the rocket fuel sample.
Learn more about stoichiometric factor: brainly.com/question/29642903
#SPJ11
A mesh is used to keep the products of the electrolysis apart.
Suggest one reason why the products of the electrolysis must be kept apart.
[1 mark]
Which type of particle passes through the mesh in the electrolysis of
molten sodium chloride?
Tick (✓) one box.
Atom[]
Electron[]
lon[]
Molecule[]
[1 mark]
Answer:
The products must be kept apart as the products could react spontaneously. Also, ions from the electrolyte pass through the mesh. This may include Na+ and Cl- ions if the electrolyte is maintained at a molten state.
Calculate the solubility at 25 °C of Zn(OH), in pure water and in a 0.0050 M ZnSO4 solution. You'll find K, data in the ALEKS Data tab. Round both of your answers to 2 significant digits. solubility in pure water: 601 solubility in 0.0050 M ZnSO4 solution: 602 xs ? Zn(OH)2 3.0x10-17
The solubility at 25 °C of Zn(OH)₂ in pure water is 6.0 x 10⁻¹³ M, and in a 0.0050 M ZnSO₄ solution, it is 6.0 x 10⁻¹² M.
The solubility of Zn(OH)₂ can be determined using the solubility product constant (Ksp) value, which is provided as 3.0 x 10⁻¹⁷ in the question.
The chemical equation for the dissolution of Zn(OH)₂ in water is:
Zn(OH)₂(s) ⇌ Zn²⁺(aq) + 2OH⁻(aq)
The Ksp expression for the dissolution of Zn(OH)₂ is:
Ksp = [Zn²⁺][OH⁻]²
Since the solubility of Zn(OH)₂ is x mol/L, the concentrations of Zn²⁺ and OH⁻ ions in the saturated solution are also x mol/L and 2x mol/L, respectively.
Substituting these concentrations into the Ksp expression, we get:
Ksp = (x)(2x)² = 4x³
Rearranging this expression, we can solve for the solubility of Zn(OH)₂ in terms of Ksp:
[tex]x = (Ksp/4)^{(1/3)[/tex]
Substituting the given value of Ksp into this equation, we get:
x =[tex](3.0 \times 10^{-17}/4)^{(1/3)[/tex] = 6.0 x 10⁻¹³ M
This is the solubility of Zn(OH)₂ in pure water.
To calculate the solubility of Zn(OH)₂ in a 0.0050 M ZnSO₄ solution, we need to take into account the common ion effect, which will decrease the solubility of Zn(OH)₂ in the presence of Zn²⁺ ions from the added ZnSO₄.
The chemical equation for the dissociation of ZnSO₄ in water is:
ZnSO₄(s) ⇌ Zn²⁺(aq) + SO₄²⁻(aq)
The addition of ZnSO₄ to water will increase the concentration of Zn²⁺ ions in the solution, which will decrease the solubility of Zn(OH)₂ according to Le Chatelier's principle.
The common ion effect can be taken into account using the ion product (Q) of the dissolution reaction, which is given by:
Q = [Zn²⁺][OH⁻]²
In the presence of the added Zn²⁺ ions, the concentration of OH⁻ ions required to reach equilibrium is lower than it is in pure water. Therefore, the solubility of Zn(OH)₂ will be lower in the presence of the added Zn²⁺ ions.
To calculate the solubility of Zn(OH)₂ in the presence of the added ZnSO₄, we can use the following equation:
Ksp = Q + [Zn²⁺]x[OH⁻]²
At equilibrium, Q = Ksp, so we can rearrange this equation to solve for the solubility, x:
[tex]x = [(Ksp - [Zn^{2+}]\times)/(2)]^{(1/2)[/tex]
To know more about solubility, refer here:
https://brainly.com/question/14366471#
#SPJ11
a metal sample weighing 45.2 g at a temperature of 100.0 oc was placed in 38.6 g of water in a calorimeter at 25.2 oc. at equilibrium, the temperature of the water and metal was 32.5 oc. given this data, the specific heat of the metal must be____
To solve for the specific heat of the metal, we can use the formula:
q = mcΔT
where q is the heat gained or lost, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
First, let's calculate the heat gained by the water:
q_water = mcΔT
= (38.6 g)(4.18 J/g°C)(32.5 - 25.2)°C
= 1,230.8 J
Next, let's calculate the heat lost by the metal:
q_metal = -q_water
= -1,230.8 J
Note that we use a negative sign for q_metal because the metal is losing heat to the water.
Now we can solve for the specific heat of the metal:
q_metal = mcΔT
-1,230.8 J = (45.2 g)c(32.5 - 100.0)°C
c = 0.473 J/g°C
Therefore, the specific heat of the metal is 0.473 J/g°C.
Learn more about metal here:
https://brainly.com/question/29404080
#SPJ11
Aqueous zinc bromide reacts with solid aluminum to produce aqueous aluminum bromide and solid zinc. Write a balanced equation for this reaction
The balanced equation for the reaction between aqueous zinc bromide (ZnBr₂) and solid aluminum (Al) to produce aqueous aluminum bromide (AlBr₃) and solid zinc (Zn) is:
3ZnBr₂ + 2Al -> 2AlBr₃ + 3Zn
In this reaction, three moles of zinc bromide (ZnBr₂ ) react with two moles of aluminum (Al) to yield two moles of aluminum bromide (AlBr₃) and three moles of zinc (Zn). The equation is balanced in terms of both mass and charge, ensuring that the number of atoms of each element is the same on both sides of the equation.
This reaction represents a single replacement or displacement reaction, where aluminum replaces zinc in the compound to form a new compound and release zinc as a solid product.
Learn more about balanced equation,
https://brainly.com/question/7144750
#SPJ4
calculate the amount (mol) of each compound based on the masses that react. molar mass of naoh: 40.00 g/mol molar mass of fecl3: 162.21 g/mol
Based on the masses that react, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃, which react to form 0.185 mol of Fe(OH)₃.
To calculate the amount (mol) of each compound based on the masses that react, you first need to use the given molar masses to convert the mass of each compound to moles. This can be done using the formula:
moles = mass (in grams) / molar mass (in grams/mol)
For example, if we have 20 grams of NaOH, we can calculate the number of moles as:
moles NaOH = 20 g / 40.00 g/mol = 0.5 mol
Similarly, if we have 30 grams of FeCl₃, we can calculate the number of moles as:
moles FeCl₃ = 30 g / 162.21 g/mol = 0.185 mol
Therefore, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃ reacting with each other. The balanced chemical equation for the reaction is:
3 NaOH + FeCl₃ → Fe(OH)₃ + 3 NaCl
From the equation, we can see that 3 moles of NaOH react with 1 mole of FeCl₃ to produce 1 mole of Fe(OH)₃ and 3 moles of NaCl. Since we have excess NaOH in this case, we can use the amount of FeCl₃ to determine the limiting reactant and the amount of product formed.
Since we have 0.185 mol of FeCl₃ and it reacts with 3 moles of NaOH, the amount of NaOH required for complete reaction would be:
moles NaOH required = 0.185 mol FeCl₃ × (3 mol NaOH / 1 mol FeCl₃) = 0.555 mol
Since we have 0.5 mol of NaOH, it is the limiting reactant and only 0.185 mol of FeCl₃ will react to form the product. The amount of Fe(OH)₃ formed can be calculated as:
moles Fe(OH)₃ formed = 0.185 mol FeCl₃ × (1 mol Fe(OH)₃ / 1 mol FeCl₃) = 0.185 mol
Therefore, we have 0.5 mol of NaOH and 0.185 mol of FeCl₃, which react to form 0.185 mol of Fe(OH)₃.
To know more about mass, refer to the link below:
https://brainly.com/question/1416379#
#SPJ11