The formula (Volume of Pool / Pump Flow Rate (GPM) x 60 min) = turnover rate will tell us the number of hours it takes for the entire contents of the pool to pass through the filters.
This calculation is important because it ensures that the pool water is being properly circulated and filtered, which is crucial for maintaining water quality and preventing the growth of harmful bacteria. Additionally, knowing the turnover rate can help determine the appropriate amount of chlorine needed to properly sanitize the pool.
(Volume of Pool / Pump Flow Rate (GPM) x 60 min) = turnover rate, will tell us the number of hours it takes for the entire contents of the pool to pass through the filters. So, the correct answer is option (a). This calculation helps determine the efficiency of the pool's circulation system, including the pump and filter, but it does not provide information about the chlorine demand or gallons per minute flow rate.
To know more about bacteria visit :-
https://brainly.com/question/8695285
#SPJ11
a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s
The amplitude of the motion is approximately 0.290 m.We find using conservation of energy principle.
Using the conservation of energy principle, we can find the amplitude of the motion of a 2.00 kg frictionless block attached to an ideal spring with force constant 365 N/m that is undergoing simple harmonic motion. Given that the block has a displacement of 0.200 m and is moving in the negative x direction with a speed of 5.00 m/s, we can calculate the amplitude using the formula:
A = v / sqrt(k/m)
where A is the amplitude, v is the maximum velocity of the block, k is the spring constant, and m is the mass of the block. Plugging in the given values, we get:
A = 5.00 m/s / sqrt(365 N/m / 2.00 kg)
Simplifying this expression, we get:
A ≈ 0.290 m
Learn more about conservation of energy here:
https://brainly.com/question/2137260
#SPJ11
The complete question is :
a 2.00 kg frictionless block attached to an ideal spring with force constant 365 n m is undergoing simple harmonic motion when the block has displacement 0.200 m it is moving in the negative x direction with a speed of 5.00 m s Find the amplitude of the motion.
When the rate of the forward reaction equals the rate of the backward reaction, the system is said to be in (2 points)
reverse
dynamic equilibrium
homeostasis
suspended state
When the rate of the forward reaction equals the rate of the backward reaction, the system is said to be dynamic equilibrium. Hence option B is correct.
A dynamic equilibrium exists in chemistry when a reversible reaction occurs. Substances transition at equal rates between reactants and products, implying that there is no net change. Reactants and products are generated at such a rapid rate that neither's concentration changes. It's an example of a system in a steady state.
A closed system is in thermodynamic equilibrium in physics when reactions occur at such rates that the composition of the mixture does not vary with time. Reactions do occur, sometimes violently, but not to the point that changes in composition may be recognised. Equilibrium constants can be stated in terms of reversible reaction rate constants.
Hence option B is correct.
To know more about dynamic equilibrium :
https://brainly.com/question/2363073
#SPJ1.
which of the following is not a vector?multiple choiceaccelerationmassweightvelocityincorrectall of these choices are correct.
A. mass
B. displacemet
C. weight
D. acceleration
Mass is a scalar quantity and not a vector quantity. The correct answer is A. mass.
Scalars are quantities that have only magnitude, while vectors are quantities that have both magnitude and direction.On the other hand, the other three options - displacement, weight, and acceleration - are all vector quantities.Displacement is the vector quantity that represents the distance and direction of an object's change in position. Weight is the force exerted on an object due to gravity, and it is a vector quantity as it has both magnitude and direction. Acceleration is the vector quantity that represents the rate of change of velocity of an object over time, and it is also a vector because it has both magnitude and direction.It is important to understand the difference between scalar and vector quantities as they are fundamental concepts in physics and are used to describe the behavior of objects in the physical world.
For more such question on scalar quantity
https://brainly.com/question/356987
#SPJ11
What is the energy; in J, of light that must be absorbed by a hydrogen atom to transition an electron from n = 3 t0 n = 5? Submit an answer to three signficant figures
The energy of light that must be absorbed by a hydrogen atom to transition an electron from n = 3 to n = 5 is approximately: 1.55 × 10⁻¹⁹ J.
To calculate the energy of light, in Joules, that must be absorbed by a hydrogen atom to transition an electron from n = 3 to n = 5, you can follow these steps:
1. Use the Rydberg formula for energy change:
ΔE = E_final - E_initial = (-13.6 eV / n_final²) - (-13.6 eV / n_initial²)
2. Plug in the given values of n_initial = 3 and n_final = 5:
ΔE = (-13.6 eV / 5²) - (-13.6 eV / 3²)
3. Calculate the energy change:
ΔE = (-13.6 eV / 25) - (-13.6 eV / 9) = -0.544 eV - (-1.511 eV) = 0.967 eV
4. Convert the energy change from electron volts (eV) to Joules (J) using the conversion factor 1 eV = 1.602 × 10⁻¹⁹ J:
ΔE = 0.967 eV × (1.602 × 10⁻¹⁹ J/eV) = 1.549 × 10⁻¹⁹ J
5. Round the answer to three significant figures:
ΔE ≈ 1.55 × 10⁻¹⁹ J
To know more about "Electron" refer here:
https://brainly.com/question/13998346#
#SPJ11
An object traveling a circular path of radius 5 m at constant speed experiences an acceleration of 3 m/s2. If the radius of its path is increased to 10 m, but its speed remains the same, what is its acceleration?
A. 0. 3 m/s2
B. 1. 5 m/s2
C. 6 m/s2
D. 12 m/s2
The answer is B. 1.5 m/s² is its acceleration.
The acceleration of an object moving in a circular path is given by the formula:
a = v²/r
where v is the speed of the object and r is the radius of the circular path.
In the first case, the object is moving in a circular path of radius 5 m and experiences an acceleration of 3 m/s². So we can write:
3 = v²/5
Solving for v, we get:
v = sqrt(15) m/s
Now, in the second case, the object is moving in a circular path of radius 10 m, but its speed remains the same at √(15) m/s. So the acceleration is given by:
a = v²/r = (√(15))²/10 = 1.5 m/s²
Therefore, the answer is B. 1.5 m/s²
Learn more about acceleration,
https://brainly.com/question/12550364
#SPJ4
Convert 150mV SCE to CSE
A) 80mVcse
B) 105mVcse
C) -85mVcse
D) -95mVcse
E) -220mVcse
The potential measured against the CSE reference electrode is (B) 105 mV CSE.
What is the correct answer for converting 150mV SCE to CSE?
The correct option is (B) 105 mV CSE.
To convert 150 mV SCE (standard hydrogen electrode) to potential measured against a CSE (copper sulfate electrode) reference electrode, you can use the following equation:
[tex]E(CSE) = E(SCE) + E\°(SCE/CSE)[/tex]
where E(CSE) is the potential measured against the CSE reference electrode, E(SCE) is the potential measured against the SCE reference electrode, and E°(SCE/CSE) is the standard potential for the SCE/CSE half-cell, which is 0.78 volts.
Substituting the given values into the equation:
[tex]E(CSE) = 150 mV + 0.78 V\\E(CSE) = 0.93 V[/tex]
Therefore, the potential measured against the CSE reference electrode is 0.93 volts, which is equivalent to (B) 105 mV CSE.
Learn more about Potential measured
brainly.com/question/21738757
#SPJ11
What marks the boundary between the inside and outside of a black hole?
The event horizon is the boundary between the inside and outside of a black hole, beyond which not even light can escape the gravitational pull.
The boundary between the inside and outside of a black hole is known as the event horizon. It is the point of no return beyond which not even light can escape the gravitational pull of the black hole. The event horizon is determined by the black hole's mass and spin, and its size is directly proportional to these factors. Once an object or even light crosses the event horizon, it is pulled inexorably towards the singularity at the center of the black hole, a point where the laws of physics as we know them break down.
Learn more about black hole here:
https://brainly.com/question/29508643
#SPJ11
g in your own words, discuss hydrostatic equilibrium. it can be described as an equally matched battle between which two things
Hydrostatic equilibrium refers to the state of balance between the forces of gravity and pressure in a fluid, such as a gas or liquid. It is essentially an equally matched battle between these two forces, where gravity pulls the fluid towards its center while pressure pushes the fluid outwards.
In this state, the pressure at any point within the fluid is equal and there is no net force acting on it. This equilibrium is crucial for maintaining the stability and shape of celestial bodies such as stars, planets, and moons, which are held together by their own gravitational forces.
For instance, in stars, the force of gravity pulls inwards while the radiation pressure generated by nuclear fusion within the star pushes outwards. This balance between forces is what keeps the star from collapsing or expanding uncontrollably.
Overall, hydrostatic equilibrium is a fundamental concept in physics that explains how gravity and pressure interact to maintain balance in fluid systems.
To know more about Hydrostatic equilibrium refer here:
https://brainly.com/question/13696206#
#SPJ11
A submarine is stranded on the bottom of the ocean with its hatch 25 m below the surface. In this problem, assume the density of sea water is 1.03 × 103 kg/m3. Calculate the magnitude of the force, in newtons, pressing on the hatch from the outside by the sea water, given it is circular and 0.65 m in diameter. The air pressure inside the submarine is 1.00 atm (101,325 Pa). (I got 83737.5 but it says it is incorrect and I am very confused)
The magnitude of the force pressing on the hatch from the outside by the sea water is approximately 50,074 newtons.
To calculate the force on the hatch, we need to find the difference between the pressure exerted by the sea water and the air pressure inside the submarine, and then multiply it by the area of the hatch.
First, let's calculate the pressure exerted by the sea water (hydrostatic pressure):
P_water = ρ × g × h
where ρ is the density of sea water (1.03 × 10³ kg/m³), g is the acceleration due to gravity (9.81 m/s²), and h is the depth of the hatch (25 m).
P_water = (1.03 × 10³ kg/m³) × (9.81 m/s²) × (25 m) = 252247.5 Pa
Next, we have the air pressure inside the submarine, P_air = 101,325 Pa.
Now, let's find the difference in pressure:
ΔP = P_water - P_air = 252247.5 Pa - 101,325 Pa = 150922.5 Pa
Now, let's calculate the area of the hatch. Since it is circular with a diameter of 0.65 m, its radius is 0.325 m. The area of a circle is given by A = πr².
A = π × (0.325 m)² ≈ 0.3317 m²
Finally, we can calculate the force acting on the hatch:
F = ΔP × A = 150922.5 Pa × 0.3317 m² ≈ 50074 N
Learn more about acceleration due to gravity here:
https://brainly.com/question/13860566
#SPJ11
The velocity function is v(t) = −t2 +3t −2 for a
particle moving along a line. Find the displacement and the distance
traveled by the particle during the time interval [-3,6].
displacement = ?
distance traveled = ?
The displacement of the particle during the time interval [-3,6] is -54.5 units, and the distance traveled by the particle during the same time interval is 54.5 units.
To find the displacement of the particle during the time interval [-3,6], we need to integrate the velocity function with respect to time. The antiderivative of v(t) is s(t) = [tex]-1/3t^3 + 3/2t^2 - 2t + C,[/tex] where C is the constant of integration. To find C, we can use the initial condition s(-3) = 0, which gives us C = 10.
Therefore, the displacement of the particle during the time interval [-3,6] is s(6) - s(-3) = -54.5 units.
To find the distance traveled by the particle during the time interval [-3,6], we need to take the absolute value of the displacement, as the distance is always positive. Therefore, the distance traveled by the particle during the time interval [-3,6] is 54.5 units.
To know more about displacement refer here:
https://brainly.com/question/28609499#
#SPJ11
According to the octet rule, the first energy level is stable with ________ electrons and the outermost energy level is stable with__________electrons.
According to the octet rule, the first energy level, also known as the K shell, is stable with a maximum of 2 electrons. This is because the K shell only has one subshell, which can hold a maximum of 2 electrons.
The outermost energy level, also known as the valence shell, is stable with a maximum of 8 electrons. This is because the valence shell has multiple subshells, including s, p, d, and f subshells, which can hold a total of 8 electrons. The octet rule states that atoms tend to gain, lose, or share electrons in order to achieve a full outermost energy level with 8 electrons, which results in greater stability.
The octet rule states that atoms are most stable when they have a full set of electrons in their outermost energy level, which typically means having 8 electrons (except for the first energy level). This is why atoms often form bonds with other atoms to achieve this stable configuration.
To know more about octet rule visit:-
https://brainly.com/question/865531
#SPJ11
a red laser from the physics lab is marked as producing 632.8-nm light. when light from this laser falls on two closely spaced slits, an interference pattern formed on a wall several meters away has bright red fringes spaced 5.00 mm apart near the center of the pattern. when the laser is replaced by a small laser pointer, the fringes are 5.13 mm apart. part a what is the wavelength of light produced by the pointer? express your answer to three significant figures and include the appropriate units.
Answer:
We can use the formula for the spacing between fringes in a double-slit interference pattern:
dsin(theta) = mlambda
where d is the distance between the slits, theta is the angle between the incident light and the normal to the screen, m is the order of the fringe, and lambda is the wavelength of the light.
Since the same screen is used for both the red laser and the pointer, we can assume that the angle theta is the same in both cases. Therefore, we can write:
dsin(theta) = mlambda_red (for the red laser)
dsin(theta) = mlambda_p (for the pointer)
Dividing these two equations, we get:
(lambda_red / lambda_p) = (m_p / m_red)
where m_p and m_red are the orders of the fringes for the pointer and the red laser, respectively.
We are given that the spacing between fringes for the red laser is 5.00 mm and for the pointer is 5.13 mm. Since the fringes are evenly spaced, we can assume that we are looking at the central maximum, where m_red = m_p = 0. Therefore:
(lambda_red / lambda_p) = 0/0 = 1
Solving for lambda_p, we get:
lambda_p = lambda_red = 632.8 nm
Therefore, the wavelength of light produced by the pointer is also 632.8 nm.
Explanation:
A 1.7-kg book rests on a table. A downward force of 14 N is exerted on the top of the book by a hand pushing down on the book.
What is the net force on the book? Is it accelerating? (You must provide an answer before moving to the next part.)
The magnitude of the net force is only 2.7 N, which is much smaller than the weight of the book. Therefore, the book is not accelerating, but rather it is in a state of static equilibrium, where the net force acting on it is zero. This means that the book is at rest and will remain at rest unless acted upon by an external force.
The net force on the book is the vector sum of all the forces acting on it. In this case, there are two forces: the weight of the book, which acts downward with a magnitude of mg = (1.7 kg)(9.81 [tex]m/s^2[/tex]) = 16.7 N, and the force exerted by the hand, which acts downward with a magnitude of 14 N.
Therefore, the net force in the book is the difference between these two forces:
Net force = 14 N - 16.7 N = -2.7 N
Since the net force is negative, this means that the book is experiencing a net force in the upward direction, which is opposite to the direction of gravity.
To know more about static equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
MUST KNOW CONCEPT
In a parallel electrical circuit
A) total resistance is the sum of all of the resistors
B) current is the same through each resistor
C) voltage is different across each resistor
D) voltage is the same across each resistor
In a parallel electrical circuit, the correct options are B and D. This means that the current is the same through each resistor and the voltage is the same across each resistor.
This happens because in a parallel circuit, each component is connected to the same two points in the circuit, creating multiple paths for the current to flow. As a result, the current is divided among the resistors, but the voltage remains constant across each one. This is an important concept to understand when designing and analyzing electrical circuits.
In a parallel circuit, all the components are connected in parallel, meaning they share the same voltage across them. Unlike a series circuit, where the total resistance is the sum of all resistors, in a parallel circuit, the total resistance is lower than the individual resistances. Additionally, the current in a parallel circuit is divided among the parallel branches, so it's not the same through each resistor.
To know more about electrical visit :-
https://brainly.com/question/776932
#SPJ11
One kg of a soil was sieved through a set of 8 sieves with the size 4. 75 mm, 2. 0 mm, 600µ, 425µ, 300µ, 212µ, 150µ and 75µ. The weight of soil retained on these sieves was found to be 50, 78, 90, 150, 160, 132, 148 and 179 gm respectively. Draw a particle size distribution curve and determine the uniformity coefficient and coefficient of curvature
The uniformity coefficient is 3.89 and the coefficient of curvature is 1.12.
The total weight of soil retained on all the sieves is 987 grams (50+78+90+150+160+132+148+179). So, the percentage of soil retained on each sieve is:
Sieve size 4.75 mm: 5.07%
Sieve size 2.0 mm: 7.89%
Sieve size 600 µm: 9.12%
Sieve size 425 µm: 15.20%
Sieve size 300 µm: 16.22%
Sieve size 212 µm: 13.38%
Sieve size 150 µm: 14.98%
Sieve size 75 µm: 18.14%
Uniformity coefficient = D60/D10 = 350/90 = 3.89
Coefficient of curvature = (D30)²/(D10 x D60) = (212²)/(90 x 350) = 1.12
A sieve is a material with a porous structure that is used to separate particles of different sizes. It can be made of various materials such as mesh, cloth, or paper. The process of separating particles using a sieve is called sieving or screening.
Sieves are commonly used in the laboratory to separate solid particles from a mixture based on their particle size. This is useful in many applications, such as isolating small particles for analysis or separating larger particles for use in a particular experiment. Sieves can also be used in the industry for sorting materials based on size, such as in the food and pharmaceutical industries. The size of the sieve used determines the size of the particles that can pass through it. The sieve size is typically measured in micrometers or millimeters. The finer the sieve, the smaller the particles that can pass through it.
To learn more about Sieve visit here:
brainly.com/question/13663054
#SPJ4
determine the energy in mev that is released when one 23592u nucleus fissions. assume that that the incoming neutron is very slow.
8.20 × 10¹⁶ MeV of energy is emitted during the fission of one 235U nucleus.
What is energy?Energy can only be transformed from one form to another; it cannot be created or destroyed.
When a nucleus of 235U is bombarded by a neutron, it absorbs the neutron and becomes unstable. This causes the nucleus to split (fission) into two smaller nuclei, releasing energy in the form of gamma rays, kinetic energy of the fission fragments, and neutrons. The total energy released in a fission event can be calculated using Einstein's famous equation E=mc², where E is the energy, m is the mass defect (the difference in mass between the initial nucleus and the fission products), and c is the speed of light.
For a single fission event of 235U, on average, the fission products have a combined mass of about 235 atomic mass units (AMU), while the mass of the neutron is about 1 AMU. This means that the mass defect for one fission event is:
Δm = (235 + 1) AMU - 235 AMU = 1 AMU
Using the conversion factor 1 amu = 931.5 MeV/c², we can convert the mass defect to energy:
ΔE = Δm × c² = 1 AMU × (931.5 MeV/c²) × (3.00 × 10⁸ m/s)² = 8.20 × 10² MeV
Therefore, the energy released when one 235U nucleus undergoes fission is 8.20 × 10¹⁶ MeV.
Learn more about energy on:
https://brainly.com/question/2003548
#SPJ11
in order for a gas filled balloon to rise in air, the density of the gas in the balloon must be less than that of air. (a) consider air to have a molar mass of 28.96 g/mol; determine the density of air at 25 o c and 1 atm, in g/l
The density of air at 25°C and 1 atm is approximately 1.225 g/L.
To determine the density of air at 25 °C and 1 atm pressure, we can use the ideal gas law, which states :- PV = nRT
P = pressure (in atm)
V = volume (in liters)
n = number of moles of gas
R = ideal gas constant (0.0821 L atm / (mol K))
T = temperature (in Kelvin)
First, let's convert the given temperature from Celsius to Kelvin by adding 273.15:
25 °C + 273.15 = 298.15 K
Given that the molar mass of air is 28.96 g/mol, we can use this information to calculate the number of moles of air:
molar mass of air = 28.96 g/mol
mass of air = molar mass of air * number of moles of air
Since we want to determine the density of air in g/L, we can rearrange the ideal gas law equation to solve for density:
density = mass/volume
mass = molar mass of air * number of moles of air
volume = V (volume of air)
Substituting these values into the rearranged equation:
density = (molar mass of air * number of moles of air) / V
Now, we can plug in the given values for pressure, temperature, and the ideal gas constant:
P = 1 atm
T = 298.15 K
R = 0.0821 L atm / (mol K)
Plugging in these values, we get:
density = (28.96 g/mol * n) / V = (28.96 g/mol * n) / V
To know more about density of air refer here ;-
https://brainly.com/question/3814070#
#SPJ11
If you have a 500 watt lightbulb and the wall socket provides 120 Volts, what is the current? Explain.
Answer: To calculate the current, we can use the formula I = P/V, where I is the current, P is the power, and V is the voltage.
For a 500 watt lightbulb and a 120 volt wall socket, the current would be:
I = P/V
I = 500/120
I = 4.17 amps
Therefore, the current would be 4.17 amps.
This formula is derived from Ohm's law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them. In this case, the resistance of the lightbulb is not given, but we can assume that it is constant. By knowing the power and voltage, we can use the formula to calculate the current.
Explanation:
the range of temperatures in the kelvin (absolute) scale between the freezing point and boiling point of water is
The range of temperatures in the Kelvin scale between the freezing point and boiling point of water is 100 K.
The Kelvin scale, also known as the absolute temperature scale, was developed by William Thomson, also known as Lord Kelvin, in 1848. It's designed to have an absolute zero, which is the lowest possible temperature in the universe, and is equivalent to -273.15°C.
In the Kelvin scale, the freezing point of water is set at 273.15 K, while the boiling point is 373.15 K. This range of temperatures is essential to understanding and measuring various physical and chemical processes. For instance, it can help determine the phase changes of substances (like water) under various conditions, as well as their thermal properties.
The Kelvin scale is widely used in scientific and engineering applications, as it provides a more accurate and universal way to measure temperature, compared to other scales such as Celsius or Fahrenheit. It is also beneficial for studying extreme temperatures, such as those in outer space or during nuclear reactions, where the concept of absolute zero is crucial.
In summary, the range of temperatures in the Kelvin scale between the freezing and boiling points of water is 100 K (from 273.15 K to 373.15 K), which is useful for various scientific applications and provides a consistent and accurate measurement of temperature.
For more such questions on Kelvin scale.
https://brainly.com/question/30654754#
#SPJ11
A man does 4,335 J of work in the process of pushing his 2.80 103 kg truck from rest to a speed of v, over a distance of 27.5 m. Neglecting friction between truck and road, determine the following. (a) the speed v m/s (b) the horizontal force exerted on the truck N
The speed of the truck is approximately 8.42 m/s. The horizontal force exerted on the truck is approximately 157.64 N.
(a) The work-energy principle relates the work done on an object to its change in kinetic energy. Since the truck starts from rest, the work done on it equals its final kinetic energy:
W = [tex](1/2)mv^2[/tex]
Solving for v, we get:
v = [tex]sqrt(2W/m) = sqrt(2(4,335 J)/(2.80 x 10^3 kg)) ≈ 8.42 m/s[/tex]
Therefore, the speed of the truck is approximately 8.42 m/s.
(b) The horizontal force exerted on the truck can be found using the formula for work:
W = Fx
where F is the force exerted on the truck and x is the distance over which the force is applied. Rearranging this equation, we get:
F = W/x = (4,335 J)/(27.5 m) ≈ 157.64 N
Therefore, the horizontal force exerted on the truck is approximately 157.64 N.
To know more about horizontal force, visit:
https://brainly.com/question/10564289#
#SPJ11
When there is a change in the magnetic field in a closed loop of wire
A) a voltage is induced in the wire.
B) a current is created in the loop of wire.
C) electromagnetic induction occurs.
D) all of these.
E) none of these.
D) all of these. When there is a change in the magnetic field in a closed loop of wire, a voltage is induced in the wire, which in turn creates a current in the loop of wire. This process is known as electromagnetic induction.
When there is a change in the magnetic field in a closed loop of wire, Faraday's law of electromagnetic induction states that a voltage will be induced in the wire. This voltage can then cause a current to flow in the loop of wire, according to Ohm's law. Therefore, both A) a voltage is induced in the wire, and B) a current is created in the loop of wire.The phenomenon of inducing a voltage in a closed loop of wire due to a change in the magnetic field is called electromagnetic induction, which is C) another correct answer.Therefore, the correct answer is D) all of these.
Learn more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ11
35 kg/s of steam (superheated water vapor) enters an adiabatic, sssf turbine at 700oc, 2.0 mpa, with a velocity of 50 m/s. 28 kg/s of steam exits the turbine at 200oc, 300 kpa, with a velocity of 12 m/s, and the rest exits at 150 kpa with a quality of 70%, and negligible velocity. the surroundings are constant at 100oc. (a) draw a schematic of this device. write your assumptions. (b) write the pertinent info for each inlet and outlet flow. be sure to list tables used. (c) calculate the power input (or output) for this turbine. (d) determine the rate of entropy generation for this turbine. (e) is this turbine reversible, irreversible, or impossible? how did you determine this
This is a thermodynamics problem involving a steam turbine. The power output of the turbine is 39111.5 kW, and the rate of entropy generation is 3.167 kW/K. Although the turbine is adiabatic and can be considered reversible in theory, practical losses make it an irreversible device.
The required information for each inlet and outlet flow, and solve the given problems.
(a) Assumptions:
The turbine operates at steady-state.
The turbine is adiabatic, meaning there is no heat transfer.
The turbine is an ideal device, with no friction or other losses.
The kinetic and potential energy changes are negligible.
(b) Pertinent Information:
Inlet Flow:
Mass flow rate = 35 kg/s
Inlet Temperature = 700 °C = 973 K
Inlet Pressure = 2.0 MPa
Inlet Velocity = 50 m/s
Using steam tables, we can find the enthalpy of the inlet steam to be h1 = 3567.4 kJ/kg and the entropy to be s1 = 7.055 kJ/kg-K.
Outlet Flow:
Mass flow rate = 28 kg/s
Outlet Temperature = 200 °C = 473 K
Outlet Pressure = 300 kPa
Outlet Velocity = 12 m/s
Using steam tables, we can find the enthalpy of the outlet steam to be h2 = 2751.1 kJ/kg and the entropy to be s2 = 6.631 kJ/kg-K.
For the other outlet flow, we know the pressure and quality. Using steam tables, we can find that the enthalpy is h3 = 2975.5 kJ/kg and the entropy is s3 = 6.784 kJ/kg-K.
(c) Power Input (or Output) Calculation:
We can use the steady-state energy balance equation to calculate the power output of the turbine:
Power Output = m*(h1 - h2) + (35 kg/s - 28 kg/s)*(h1 - h3)
where m is the mass flow rate of the second outlet flow.
Substituting the values, we get:
Power Output = 35*(3567.4 - 2751.1) + 7*(3567.4 - 2975.5)
Power Output = 39111.5 kW
Therefore, the power output of the turbine is 39111.5 kW.
(d) Rate of Entropy Generation Calculation:
The rate of entropy generation can be calculated using the following equation:
Rate of Entropy Generation = m2s2 - m1s1 - m3*s3
where m1, m2, and m3 are the mass flow rates of the inlet, first outlet, and second outlet flows, respectively.
Substituting the values, we get:
Rate of Entropy Generation = 286.631 - 357.055 - m36.784
Since we know that m3 = 7 kg/s (calculated by mass balance), we get:
Rate of Entropy Generation = 286.631 - 357.055 - 76.784
Rate of Entropy Generation = 3.167 kW/K
Therefore, the rate of entropy generation for the turbine is 3.167 kW/K.
(e) Reversibility:
Since the turbine is an adiabatic device, there is no heat transfer. Therefore, the turbine can be considered reversible. However, since there are losses due to friction and other factors, the turbine is not a perfectly reversible device. It is an irreversible device in practical terms.
To know more about the thermodynamics refer here :
https://brainly.com/question/1604031#
#SPJ11
a device consists of eight balls each of mass 0.6 kg attached to the ends of low-mass spokes of length 1.4 m, so the radius of rotation of the balls is 0.7 m. the device is mounted in the vertical plane. the axle is held up by supports that are not shown, and the wheel is free to rotate on the nearly frictionless axle. a lump of clay with mass 0.20 kg falls and sticks to one of the balls at the location shown, when the spoke attached to that ball is at 45 degrees to the horizontal. just before the impact the clay has a speed 7 m/s, and the wheel is rotating counterclockwise with angular speed 0.24 radians/s.
Answer:
First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:
L1 = Iω1
where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.
The moment of inertia of the wheel can be calculated using the formula:
I = Σmr^2
where Σmr^2 is the sum of the products of the mass of each ball (m) and the square of its distance from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:
I = 8m(0.7)^2 = 3.136m
where m is the mass of each ball.
Substituting the given values, we get:
I = 8(0.6)(0.7)^2 = 1.176 kg·m^2
The initial angular velocity is ω1 = 0.24 rad/s. Therefore:
L1 = Iω1 = (1.176 kg·m^2)(0.24 rad/s) = 0.28224 kg·m^2/s
When the clay hits the ball, it sticks to it, and the ball starts to rotate with the same angular velocity as the wheel. Let ω2 be the final angular velocity of the system after the collision. Then the final angular momentum of the system is:
L2 = Iω2 + mvR
where m is the mass of the clay, v is its velocity just before the collision, and R is the distance of the point of impact from the center of the wheel.
Substituting the given values, we get:
L2 = (1.176 kg·m^2)ω2 + (0.20 kg)(7 m/s)(0.7 m)
L2 = 1.176ω2 + 0.588 kg·m^2/s
Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:
ω2 = (L1 - 0.588 kg·m^2/s) / 1.176 kg·m^2
ω2 = (0.28224 kg·m^2/s - 0.588 kg·m^2/s) / 1.176 kg·m^2
ω2 = -0.2214 rad/s
The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.
Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:
K1 = (1/2)Iω1^2
Substituting the given values, we get:
K1 = (1/2)(1.176 kg·m^2)(0.24 rad/s)^2 = 0.03372 J
The final kinetic energy is:
K2 = (1/2)Iω2^2
Substituting the calculated value of ω2, we get:
K2 = (1/2)(1.176 kg·m^2)(0.2214 rad/s)^2 = 0.01408 J
Therefore, the new kinetic energy of the system after the collision is 0.01408 J.
Therefore, the new kinetic energy of the system after the collision is 0.01408 J.
First, let's find the initial angular momentum of the system before the clay hits the ball. Since the wheel is rotating counterclockwise, the direction of the angular momentum is into the page (out of the screen). The initial angular momentum of the system is:
L1 = Iω1
where I is the moment of inertia of the wheel and ω1 is its initial angular velocity.
The moment of inertia of the wheel can be calculated using the formula:
I =
where Σ[tex]mr^2[/tex] is the sum of the products of the mass of each ball (m) and the square of its from the center of the wheel (r). Since all the balls are equidistant from the center, we can simplify this to:
I = [tex]8m(0.7)^2[/tex] = 3.136m
where m is the mass of each ball.
Substituting the given values, we get:
I = [tex]8(0.6)(0.7)^2 = 1.176 kg * m^2[/tex]
The initial angular velocity is ω1 = 0.24 rad/s. Therefore:
Since angular momentum is conserved, we have L1 = L2. Equating the two expressions for L and solving for ω2, we get:
[tex]w2 = (L1 - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = (0.28224 kgm^2/s - 0.588 kgm^2/s) / 1.176 kgm^2\\w2 = -0.2214 rad/s[/tex]
The negative sign indicates that the direction of the angular velocity is clockwise, opposite to the initial direction of rotation. Therefore, the final angular velocity of the system after the collision is 0.2214 rad/s clockwise.
Finally, we can calculate the new kinetic energy of the system after the collision. The initial kinetic energy is:
K2 = [tex](1/2)Iw_2^2[/tex]
Substituting the calculated value of ω2, we get:
K2 = [tex](1/2)(1.176 kgm^2)(0.2214 rad/s)^2 \\= 0.01408 J[/tex]
Learn more about kinetic energy Visit: brainly.com/question/8101588
#SPJ4
An object was weighed in air had a mass of 40. 0 gram. In water, its apparent mass is 5. 00 grams. What is the density (in g/cm3) of the object correct to three significant figures
The density of the object is 0.103 g/cm³, correct to three significant figures.
To find the density of the object, we need to use the principle of buoyancy. The difference between the weight of the object in air and its apparent weight in water is due to the buoyant force exerted by the water on the object. This force is equal to the weight of the water displaced by the object.
The mass of the water displaced can be calculated as follows:
Mass of water = density of water x volume of water displaced
Since the volume of water displaced is equal to the volume of the object, we can write:
Mass of water = density of water x volume of object
The apparent weight of the object in water is equal to the weight of the object minus the weight of the water displaced:
Apparent weight = weight of object - weight of water displaced
We know that the weight of the object in air is 40.0 grams, which is also its mass, since the acceleration due to gravity is approximately 9.81 m/s². Therefore, the weight of the object is:
Weight of object = mass of object x acceleration due to gravity
= 40.0 g x 9.81 m/s²
= 392.4 g m/s²
The weight of the water displaced is equal to the buoyant force, which can be calculated using Archimedes' principle:
Buoyant force = weight of water displaced = apparent weight of object
Substituting the values we have:
Weight of water displaced = 392.4 g m/s² - 5.00 g m/s²
= 387.4 g m/s²
We can now find the volume of the object:
Volume of object = volume of water displaced
Density of object = mass of object / volume of object
Substituting the values we have:
Density of object = 40.0 g / (387.4 g/cm³ x 1 cm³)
= 0.103 g/cm³
Therefore, the density of the object is 0.103 g/cm³, correct to three significant figures.
Learn more about density ,
https://brainly.com/question/29775886
#SPJ4
which of the following statements are true concerning special relativity? check all that apply. which of the following statements are true concerning special relativity?check all that apply. time can no longer be regarded as an absolute quantity. clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest. light propagates through empty space with a definite speed independent of the speed of the source or observer. the laws of physics have the same form in all inertial reference frames. the length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.
The statements given are about special relativity and all of them are true because consists of key concepts in special relativity.
Special relativity is a theory developed by Albert Einstein that explains the behavior of objects in motion at high speeds near the speed of light. The correct statements concerning special relativity are:
- Time can no longer be regarded as an absolute quantity.
- Clocks moving relative to an observer are measured by that observer to run more slowly compared to clocks at rest.
- Light propagates through empty space with a definite speed independent of the speed of the source or observer.
- The laws of physics have the same form in all inertial reference frames.
- The length of an object is measured to be shorter when it is moving relative to the observer than when it is at rest.
These statements are all true and are key concepts in special relativity. The theory has been extensively tested and has been found to be accurate in describing the behavior of objects at high speeds.
To know more about Einstein’s Special Relativity visit:
https://brainly.com/question/30054334
#SPJ11
LIGO detects gravitational waves because the lengths of its arms change as gravitational waves pass by. About how much are these lengths expected to change when LIGO detects gravitational waves from the merger of two neutron stars or two black holes?
When LIGO detects gravitational waves from the merger of two neutron stars or two black holes, the lengths of its arms are expected to change by an incredibly small amount, on the order of one part in 10^21.
This is roughly equivalent to detecting a change in the length of the distance from the Earth to the nearest star by the width of a human hair. Despite the extremely small size of the expected signal, LIGO is designed with incredibly precise measurement tools that can detect these tiny changes in distance.
These tools include lasers and mirrors that are isolated from external vibrations and disturbances to maximize sensitivity of the detectors.
Learn more about LIGO here:- brainly.com/question/30722973
#SPJ11
what is the initial rotational angular momentum of the satellite, around location d (its center of mass)? (be sure your signs are correct).
The initial rotational angular momentum of the satellite, around location d (its center of mass), is zero.
Rotational angular momentum (L) is given by L = Iω, where I is the moment of inertia and ω is the angular velocity. Since the satellite is not rotating initially, ω = 0. Therefore, the initial rotational angular momentum of the satellite is zero.
Furthermore, the moment of inertia of the satellite is given by I = ∑mr², where m is the mass of each particle and r is the distance of the particle from the axis of rotation.
Assuming that the satellite is a uniform sphere, we can use the formula for the moment of inertia for a solid sphere, which is I = (2/5)MR², where M is the mass of the sphere and R is its radius. Since the axis of rotation is passing through the center of mass of the satellite, the distance of each particle from the axis of rotation is R. Therefore, the moment of inertia of the satellite is I = (2/5)MR².
Substituting the value of ω = 0 and I = (2/5)MR² in the formula for angular momentum, we get L = 0. Therefore, the initial rotational angular momentum of the satellite is zero.
To know more about rotational angular momentum refer here:
https://brainly.com/question/14082734#
#SPJ11
Determine the transformation products and the approximate percent after each step for the following three cooling procedures, for steel with the eutectoid composition that is initially equilibrated at 730°C. 1. (a) Quench to 650°C and hold for 100 seconds. 1. (b) Then cool to room temperature. 2. (a) Quench to 650°C and hold for 2 seconds (2 = 100. 3). 2. (b) Then quench to room temperature. 3. (a) Quench to 650°C and hold for 10 seconds. 3. (b) Then quench to room temperature. 4. (a) Quench to 400°C and hold for 3. 16 seconds (3. 16 = 100. 5). 4. (b) Then quench to room temperature. 5. (a) Quench to 400°C and hold for 25 seconds (25 = 101. 4). 5. (b) Then quench to room temperature. 6. (a) Quench to 400°C and hold for 200 seconds (200 = 102. 3). 6. (b) Slow cool to room temperature. 7. (a) Quench to 0°C in 10 seconds. 7. (b) Heat to 600°C and hold for 1000 seconds
We may learn more about the qualities of the steel and how it might be employed in various applications by comprehending how the steel responds to these diverse cooling processes.
The various cooling techniques for steel with eutectoid composition that was first equilibrated at 730°C are discussed in this question.
The microstructures and the approximate percent after each step for the given cooling procedures are as follows:
(a) Quench to 650°C and hold for 100 seconds.
(b) Then cool to room temperature.
The transformation product is pearlite.
The percent of pearlite is approximately 100%.
(a) Quench to 650°C and hold for 2 seconds (2 = 100.3).
(b) Then quench to room temperature.
The transformation product is bainite.
The percent of bainite is approximately 100%.
(a) Quench to 650°C and hold for 10 seconds.
(b) Then quench to room temperature.
The transformation product is a mixture of pearlite and bainite.
The percent of pearlite is approximately 70% and the percent of bainite is approximately 30%.
(a) Quench to 400°C and hold for 3.16 seconds (3.16 = 100.5).
(b) Then quench to room temperature.
The transformation product is martensite.
The percent of martensite is approximately 100%.
(a) Quench to 400°C and hold for 25 seconds (25 = 101.4).
(b) Then quench to room temperature.
The transformation product is a mixture of martensite and bainite.
The percent of martensite is approximately 90% and the percent of bainite is approximately 10%.
The steel is quenched to various temperatures and held there for differing lengths of time before being cooled to room temperature or heated again to higher degrees as part of the cooling procedures.
We may learn more about the qualities of the steel and how it might be employed in various applications by comprehending how the steel responds to these diverse cooling processes.
Learn more about cooling processes:
https://brainly.com/question/29851497
#SPJ4
A corrosion circuit produces 2 Amperes of current at a driving voltage of 1.6 Volts, what is the resistance of this circuit?
A) 1.8 Ohms
B) 2.8 Ohms
C) 0.8 Ohms
D) 9 Ohms
In this case, the voltage is 1.6 Volts, and the current is 2 Amperes.R = 1.6 V / 2 A = 0.8 Ohms. Therefore, the correct answer is option C) 0.8 Ohms.
So, the correct answer is C) 0.8 Ohms. The resistance of the corrosion circuit can be calculated using Ohm's law, which states that resistance is equal to voltage divided by current. Therefore, the resistance of the circuit can be calculated as:
Resistance = Voltage / Current
Plugging in the values given in the question, we get:
Resistance = 1.6 V / 2 A
Simplifying this expression, we get:
Resistance = 0.8 Ohms
Therefore, the correct answer is option C) 0.8 Ohms.
Learn more about Ohm's Law here:
https://brainly.com/question/1247379
#SPJ11
One cloud carries a charge of − 1. 0 C −1. 0Cminus, 1, point, 0, start text, C, end text and another cloud carries a charge of 5. 0 C 5. 0C5, point, 0, start text, C, end text. The two clouds are 1. 5 × 1 0 3 m 1. 5×10 3 m1, point, 5, times, 10, cubed, start text, m, end text apart. Calculate the magnitude of the force between these two charged objects. Write your answer in scientific notation using two significant figures.
We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.
There are 1.5 x 103 metres between two clouds. The difference in charge between two clouds is 1.0 C for one and 5.0 C for the other. We can utilise Coulomb's law, which takes into account both the distance between the charges and the strength of their charges, to determine the force between them.
The equation provides us with an attraction or repelling force between the charges. In this instance, the result is a -0.15 N attractive force. As a result, the two clouds would be attracted to one another.
We obtain a force of -1.5 x 10-1 N when we translate the response into scientific notation with two significant figures.
Learn more about force:
https://brainly.com/question/26115859
#SPJ4