Answer:
240 μC
Explanation:
When two capacitors are connected in parallel, the effective capacitance is the sum of the individual capacitances. In this case, the effective capacitance is:
C = C1 + C2 = 2 μF + 2 μF = 4 μF
The charge on a capacitor is related to the capacitance and the potential difference across it by the equation:
Q = C × V
where Q is the charge, C is the capacitance, and V is the potential difference.
Using this equation, the charge on each capacitor can be calculated as follows:
Q1 = C1 × V = 2 μF × 120 V = 240 μC
Q2 = C2 × V = 2 μF × 120 V = 240 μC
Therefore, the charge on each capacitor is 240 μC.
Why must the negative terminals of the batteries be connected on the same side of the parallel circuit and positive terminals on the other side
The negative terminals of batteries must be connected on the same side of a parallel circuit and positive terminals on the other side to ensure that the voltage across each branch of the circuit is the same and that the batteries share the load equally.
In a parallel circuit, each branch of the circuit provides a separate path for current to flow, and the voltage across each branch is the same. Connecting the negative terminals of the batteries on the same side and the positive terminals on the other side ensures that the voltage across each branch remains the same, as the voltage drop across each battery is identical.
If the batteries were connected with opposite polarity, the voltage across each branch would be different, and the battery with the higher voltage would take on a larger share of the load, leading to unequal discharge and potentially damaging the batteries. It is essential to connect the negative terminals of the batteries on the same side and the positive terminals on the other side to ensure that each battery shares the load equally.
To know more about parallel circuit, here
brainly.com/question/28444959
#SPJ4
A U-Shaped tube of constant cross-sectional area contains water of density 1000kg/m cubed. Bothe side of the tube are open to the atmosphere. The atmospheric pressure is 1. 00 x 10 to the power of 5. The left hand side is now connected to a gas supply using a length of rubber tubing. This causes the level of the water in the left hand side to drop by 0. 200m. Calculate the pressure of the gas supply. Give your answer to 3 significant figures
Answer:
If the water in the left side drops .2 m then the water on the right side rises by .2 m
The pressure on the gas is due to the height difference of the water on the two sides.
P = ρ g h
ρ g = 9.8 m/s^2 * 1000 kg / m^3 = 9800 N/m^3 weight density of water
P = 9800 N/m^3 * .4 m = 3920 N / m^2 = 3.92E3 N/m^2
Absolute pressure of gas = 3.92E3 / 1.01E5 = .0388 atmosphere
Look carefully at this telescopic photo of the Moon. All the following statements are true. Which one is proved by the fact that the line dividing the dark and bright regions is not perfectly straight?
The Moon's surface is not perfectly smooth but rather has mountains and valleys.
Answer:
Yes you're correct
Explanation:
The Moon's surface is not perfectly smooth but rather has mountains and valleys. Imagine looking at a sponge at a certain angle and put a dim flashlight behind the sponge. You can see that the grooves make it so its not a perfectly straight shadow.
The fact that the line dividing the dark and bright regions of the Moon is not perfectly straight proves that the Moon's surface is not perfectly smooth but rather has mountains and valleys.This is because the terrain of the Moon is comprised of mountains, craters, and valleys, meaning that the line separating the dark and bright regions will not be completely straight.
The irregularities of the terrain cause the line to appear wavy, and thus not completely straight. This tells us that the surface of the Moon is far from perfectly smooth.
To illustrate this further, a comparison can be drawn between the Moon and a billiard ball. If the Moon's surface were perfectly smooth, the line separating the dark and bright regions would be perfectly straight, just as if a billiard ball had been sliced in half. However, since the surface of the Moon is not perfectly smooth, the line appears wavy due to the irregularities of the terrain.
Know more about Moon here:
https://brainly.com/question/13538936
#SPJ11
how fast, in meters per second, is object a moving at the end of the ramp if it's mass is 115 g, it's radius 17 cm, and the height of the beginning of the ramp is 14 cm?
The required object A is moving at a speed of 2.62846 m/s at the end of the ramp.
To determine the speed of object A at the end of the ramp, we can use the principles of conservation of energy and rotational motion.
Given:
Mass of object A (m) = 115 g = 0.115 kgRadius of the ramp (r) = 17 cm = 0.17 mHeight of the beginning of the ramp (h) = 14 cm = 0.14 mFirst, let's calculate the potential energy (PE) of object A at the beginning of the ramp. The potential energy can be given by:
PE = m * g * h,
PE = 0.115 * 9.8 * 0.14 = 0.1628 J
At the end of the ramp, the potential energy is fully converted into kinetic energy (KE). The kinetic energy can be given by:
KE = (1/2) * I * ω²,
For a solid sphere rolling without slipping, the moment of inertia (I) can be given by:
I = (2/5) * m * r²,
I = (2/5) * 0.115 kg * (0.17 m)² = 0.00132 kg·m²
Now, we can relate the linear speed (v) and the angular velocity (ω) of the rolling object. For a solid sphere rolling without slipping, the relationship is:
v = ω * r,
ω = v / r.
Next, we equate the potential energy at the beginning of the ramp to the kinetic energy at the end of the ramp:
PE = KE
m * g * h = (1/2) * I * ω²
0.115 * 9.8 * 0.14 = (1/2) * 0.00132 * (v / r)²
0.115 * 9.8 * 0.14 = 0.00132/2 * (v / 0.17 )²
v = 2.62846
Therefore, object A is moving at a speed of 2.62846 m/s at the end of the ramp.
Learn more about motion on-ramp here:
https://brainly.com/question/31821992
#SPJ6
an iron rod is 2.58m long at 0°c. calculate the length of a brass rod at 0°c if the difference between the length of the two rods must remain the same at all temperatures. ( linear expansivity of iron= 1.2 ×10^-5k^-1, linear expansivity of brass= 1.9 × 10^-5k^-1)
Answer:
1.63 m
Explanation:
difference between the length of iron rod and brass rod must remain same, writing it in the equation form
[tex]l_{iron} - l_{brass} = C[/tex]
where C is a constant, differentiation both sides with respect to temperature([tex]\theta[/tex]),
[tex]\dfrac{dl_{iron}}{d\theta} - \dfrac{dl_{brass}}{d\theta} = 0[/tex] ... (1)
According to linear expansion equation,
[tex]\dfrac{dl}{d\theta} = \alpha l_0[/tex]
where [tex]l_0[/tex] is the length at 0 degree Celsius.
Now,
substituting values in equation 1 we get,
[tex]\alpha_{iron}. l_{iron} - \alpha_{brass} . l_{brass} = 0[/tex]
substituting the values of respective coefficient and length of iron at 0 degree Celsius we get,
[tex]l_{brass} = 1.63[/tex] m
Hopefully, this answer helped you solve the question!
How long would it take for 300 C of electric charge to pass through an aluminum wire if the current through it is 0. 6
500 seconds (or 8 minutes and 20 seconds) for 300 C of electric charge to pass through an aluminum wire if the current through it is 0.6 A.
To answer this question, we need to use the formula:
Q = I × t
where:
Q is the electric charge in Coulombs (C)
I is the current in Amperes (A)
t is the time in seconds (s)
We can rearrange this formula to solve for t:
t = Q / I
Substituting the given values, we get:
t = 300 C / 0.6 A
t = 500 seconds
Therefore, it would take 500 seconds (or 8 minutes and 20 seconds) for 300 C of electric charge to pass through an aluminum wire if the current through it is 0.6 A.
for such more question on electric charge
https://brainly.com/question/2373424
#SPJ4
when its 75 kw (100 hp) engine is generating full power, a small single-engine airplane with mass 700 kg gains altitude at a rate of 2.5 m/s ( 150 m/min, or 500 ft/min ) . what fraction of the engine power is being used to make the airplane climb? (the remainder is used to overcome the effects of air resistance and of inefficiencies in the propeller and engine.)
The fraction of the engine power used to make the airplane climb is 0.14.
The fraction of the engine power used to make the airplane climb can be determined by the equation Pclimb/Pengine = mgh/Pengine, where Pclimb is the power used to climb, m is the mass of the airplane, g is the acceleration due to gravity, and h is the rate of climb. In this case, Pclimb = 75 kW, m = 700 kg, g = 9.81 m/s2, and h = 2.5 m/s. Plugging these numbers in, we get:
Pclimb/Pengine = (700 kg)(9.81 m/s2)(2.5 m/s)/75 kW
Pclimb/Pengine = 0.14
Therefore, the fraction of the engine power used to make the airplane climb is 0.14.
Know more about engine power
https://brainly.com/question/28994705
#SPJ11
**s. O. P** (statement of the problem) need ngayon hehe thank youu!! Cleansing surface spots: an alternative to nylon-based cleaning brushes derived from coconut husk
An excellent green, eco-friendly substitute is coconut coir, a byproduct of coconuts. Due to its ability to clean without endangering the ecosystem, coir is becoming increasingly popular and adopted.
The shell of the coconut is known as coco coir. It is immersed in water for a few weeks after extraction to help it loosen and soften. The husk is then dried, brushed, and turned into a product that resembles fibre but is much stronger. Because of the product's durability, stretching or compressing it in any way won't harm it.
Fine brushes, ropes, beds, upholstery, and fishnets are all made from white coco coir, which is extracted from unripe coconuts.
Brown coco coir is pressed from ripe coconuts and used to create mats, pots, and scrubbers that resemble discs for cleaning kitchen surfaces and utensils. In the kitchen, these naturally antimicrobial items are preferable to plastic scrubbers. When they begin, they can be recycled as an organic planting substrate because they are not toxic.
To know more about ecosystem go through:-
https://brainly.com/question/1514975
#SPJ4
A conductor of square with sides of length 2d, carries a current I uniformly distributed throughout its cross-sectional area.
The current in the conductor is directed out of the screen.
Ampère’s law is applied along the circle that touches the four sides of the conductor.
Select the expression that correctly represents the magnitude of the integral around the circle.
Group of answer choices
µ0(πd2I)
µ0(2πdI)
µ0(πI/4)
µ0(4I/π)
If you cut a wire directly and squarely across its width, the end will look like a circle. The cross sectional is the area of that end.
What is a conductor's cross sectional area?If you cut a wire directly and squarely across its width, the end will look like a circle. The cross sectionarea is Pi x r2, which is the area of that end. When the wire type is the same, a larger cross section area results in lower resistance per foot.
What is the relationship between conductor length and cross section area?It is assumed that the cross's length and area The conductor's section is doubled. This means that the new length and cross sectional area are both 2l and 2A. As a result, the new resistance of the conductor is R′=2l2A=lA.
To know more about conductor visit:-
https://brainly.com/question/28189448
#SPJ1
An electron is accelerated through a potential difference V. Write the expression for its
final speed, if it was initially at rest
The final speed of an electron accelerated through a potential difference V, starting from rest, is given by the expression [tex]v = 5.93 \times 10^7 \times \sqrt{V}[/tex], where v is in meters per second and V is in volts.
The kinetic energy gained by an electron accelerated through a potential difference V is given by:
K = eV
Where:
K is the kinetic energy gained by the electron (joules)
e is the charge of the electron ([tex]1.6 \times 10^{-19}[/tex]coulombs)
V is the potential difference across which the electron is accelerated (volts)
Since the electron was initially at rest, its initial kinetic energy was zero. Therefore, the final kinetic energy of the electron will be equal to the kinetic energy gained during acceleration:
K = eV
The final velocity of the electron can be calculated using the formula for kinetic energy:
K = (1/2)m[tex]v^2[/tex]
Where:
m is the mass of the electron[tex](9.11 \times 10^{-31} kg)[/tex]
v is the final velocity of the electron
Substituting the expression for K, we get:
eV = (1/2)m[tex]v^2[/tex]
Solving for v, we get:
v = √(2eV/m)
Substituting the values for e, V, and m, we get:
[tex]v =\sqrt{ [(2 \times 1.6 x 10^{-19} C \times V) / 9.11 \times 10^{-31} kg]}[/tex]
Simplifying this expression, we get:
[tex]v = 5.93 \times 10^7 \times \sqrt{V}[/tex]
Therefore, the final speed of an electron accelerated through a potential difference V, starting from rest, is given by the expression [tex]v = 5.93 \times 10^7 \times \sqrt{V}[/tex], where v is in meters per second and V is in volts.
for such more question on kinetic energy
https://brainly.com/question/25959744
#SPJ4
2 Part question
Part 1. A 3.63 kg cat is sleeping on a couch which is 0.5 meters above the floor. Find the potential energy of the cat.
Part 2. While sleeping on the couch the cat (see problem 3 above) has a dream of being chased by the dog that lives in the apartment above the cat and as a result, falls to the floor (which takes 2 seconds) Find the kinetic energy of the cat.
The potential energy of the cat is 17.76 joules.
The kinetic energy of the cat just before hitting the ground is 84.59 joules.
How to solve for the potential energyPart 1:
The potential energy of the cat can be found using the formula:
potential energy = mass x gravity x height
where the mass of the cat is 3.63 kg, gravity is 9.81 m/s², and height is 0.5 meters.
Substituting these values in the formula, we get:
potential energy = 3.63 kg x 9.81 m/s² x 0.5 m
potential energy = 17.76 joules
Therefore, the potential energy of the cat is 17.76 joules.
Part 2:
The kinetic energy of the cat just before hitting the ground can be found using the formula:
kinetic energy = 0.5 x mass x velocity²
To find the velocity of the cat just before hitting the ground, we can use the equation of motion:
height = (1/2) x acceleration x time² + initial velocity x time
where height is 0.5 meters, acceleration is gravity (9.81 m/s²), time is 2 seconds, and initial velocity is 0 m/s (since the cat starts from rest).
Rearranging this equation to solve for velocity, we get:
velocity = (height - (1/2) x acceleration x time²) / time
velocity = (0.5 - (1/2) x 9.81 x 2²) / 2
velocity = -4.905 m/s (the negative sign indicates that the velocity is downward)
Substituting the mass of the cat (3.63 kg) and the velocity (-4.905 m/s) in the formula for kinetic energy, we get:
kinetic energy = 0.5 x 3.63 kg x (-4.905 m/s)²
kinetic energy = 84.59 joules
Therefore, the kinetic energy of the cat just before hitting the ground is 84.59 joules.
Read more on kinetic energy here:https://brainly.com/question/8101588
#SPJ1
Consider the following electrical circuit diagram in which nine identical
resistors of 3 Ω each are connected as shown. If the reading of the
ammeter A1 is 1 ampere, answer the following questions:
a) What is the relationship between the readings of A1 and A3? Give reason
b) What is the relationship between the readings A1 & A3?
c) determine the reading of the voltmeter V1 (or) find the total resistance of the circuit.
a) In a series circuit, the current remains the same throughout, so the current in the ammeter A1 is the same as the current in the ammeter A3. Therefore, the readings of A1 and A3 should be the same.
b) As mentioned in the previously, the readings of A1 and A3 should be the same since they are measuring the same current.
How to determine voltmeter reading?c) To determine the reading of the voltmeter V1, we need to know the current passing through it and the resistance between its two points. Since the circuit contains only resistors, we can apply Ohm's law to calculate the total resistance of the circuit.
The total resistance of the circuit can be calculated as follows:
Total Resistance = 9 x 3Ω (since there are nine 3Ω resistors connected in series)
Total Resistance = 27Ω
Since the current in the ammeter A1 is 1 ampere, the voltage across the voltmeter V1 can be calculated using Ohm's law:
V1 = I x R
V1 = 1 x 27
V1 = 27 volts
Therefore, the reading of the voltmeter V1 should be 27 volts.
Learn more on electrical circuit here: https://brainly.com/question/2969220
#SPJ1
What does the table suggest about the acceleration of the marble and why?
The table suggests that the acceleration of the marble increases steadily over time due to the increasing force being applied to it. This is because acceleration is directly proportional to the force applied, according to Newton's second law of motion (F = ma).
Newton's second law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.
Newton's second law is often stated as F=ma, which means the force (F) acting on an object is equal to the mass (m) of an object times its acceleration (a). This means the more mass an object has, the more force you need to accelerate it. And the greater the force, the greater the object's acceleration.
For such more questions on Newton's second law of motion:
brainly.com/question/19887955
#SPJ4
Help me pleaseeeeeeee
Discovery Statement:
I discovered that my note-taking skills needed improvement when I attended a lecture by a guest speaker who spoke very quickly and used complex technical terms that were unfamiliar to me. I found it challenging to keep up with the speaker's pace and understand the content at the same time. As a result, I struggled to take accurate and organized notes, and ended up with a confusing and incomplete set of notes. When I reviewed my notes later, I realized that I had missed important points and failed to capture the essence of the lecture. This experience made me realize that I need to improve my note-taking skills, especially in situations where the content is complex and the speaker is fast-paced.
What is the Discovery Statement about?My intention is to implement the following five note-taking strategies immediately to improve my skills:
Cornell Method - Divide notes into main ideas, supporting details, and summary. (Article: "Note-Taking Methods")Mind Maps - Use diagrams to visualize connections between ideas. (Article: "Visual Note-Taking")Abbreviations - Create a system of abbreviations to save time while taking notes. (Article: "Note-Taking Strategies for College Students")Active Listening - Stay engaged with the speaker and ask questions to clarify information. (Article: "How to Take Better Notes in Class")Review and Revise - Review notes regularly and make revisions to improve understanding. (Article: "Effective Note-Taking Techniques")Learn more about Discovery Statement on:
https://brainly.com/question/29538254
#SPJ1
See transcribed text below
MINDTAP
try: Transform Your Note-Taking
ms Journal Entry Transform your note taking
3
Q Search this course
0
Q
Question 1 of 1
Think back on the last few lectures you have attended. How would you rate your note-taking skills? As you complete this exercise, think of areas that need improvement.
1. Discovery Statement
First, recall a recent incident in which you had difficulty taking notes. Perhaps you were listening to an instructor who talked fast. Maybe you got confused and stopped taking notes altogether. Or perhaps you went to review your notes after class, only to find that they made no sense at all. Describe this incident in more detail, noting how it was challenging for you.
I discovered that...
X
2. Intention Statement
Now review this chapter to find at least five strategies that you can use right away to help you take better notes. In the space below, sum up each of those strategies in a few words, and note the title of the article where these strategies are explained.
2 Action Statement
Q Search
LM
A-Z
b
بین
9:19 PM
3/3/2023
If the the dolphin produces sound waves of wavelength of 5 cm determine by the means of calculations whether the frequency produced by dolphin can be heard by human ear the speed of sound is water is 1480 m. S-1
If the the dolphin produces sound waves of wavelength of 5 cm determine by the means of calculations whether the frequency produced by dolphin can be heard by human ear the speed of sound is water is 1480 m. S-1
To determine whether the frequency produced by the dolphin can be heard by the human ear, we can use the formula:
v = f x λ
where v is the velocity of sound in water, f is the frequency of the sound wave, and λ is the wavelength of the sound wave.
Given v = 1480 m/s, λ = 5 cm = 0.05 m, we can rearrange the formula to solve for f:
f = v / λ
Plugging in the values, we get:
f = 1480 m/s / 0.05 m
f = 29600 Hz
Therefore, the frequency produced by the dolphin is 29600 Hz.
The human ear can typically hear frequencies ranging from 20 Hz to 20,000 Hz, with some variation among individuals. Therefore, the frequency produced by the dolphin is well beyond the range of human hearing.
To know more about dolphin-
brainly.com/question/31019742
#SPJ4
what is work in physics
See Figure 1. What was the average yearly ice loss in 1980 versus 2010?
Between 1980 and 2010, there were significant differences in the average annual ice loss of glacial mass balance between different glaciers and geographical areas. This suggests that ice loss has risen since the 1980s.
What was the glacier mass balance's average annual ice loss between 1980 and 2010?The average annual mass balance of reference glaciers globally between 1980 and 1999 was -0.50 m water equivalent (w.e.) per year, while between 2000 and 2017 it was -0.69 m w.e. per year, according to the World Glacier Monitoring Service. This shows a pattern of higher ice loss compared to the 1980s and 1990s in recent years. It's crucial to remember that this figure represents an average across a significant number of glaciers.
To learn more about ice loss in glaciers visit:
brainly.com/question/15685053
#SPJ1
a student applies a horizontal force of 20.0 n to the top of a steering wheel. the steering wheel has a radius of 18 cm and a rotational inertia of 0.097 kgm2 . assuming the friction and any opposing torques are negligible, what is the initial angular acceleration of the steering wheel?
The initial angular acceleration of the steering wheel is 3.67 rad by s2.
The initial angular acceleration of the steering wheel can be calculated using the formula alpha = (F * R) by I, where F is the applied force, R is the radius of the wheel, and I is the rotational inertia.
In this case, F = 20.0 N, R = 0.18 m, and I = 0.097 kgm2. Substituting these values into the formula gives:
alpha = (20.0 N * 0.18 m) by 0.097 kgm2 = 3.67 rad by s2
Therefore, the initial angular acceleration of the steering wheel is 3.67 rad by s2.
Know more about initial angular acceleration
https://brainly.com/question/21278452
#SPJ11
balance the chemical equation
N₂ + 02 → - N₂0
The balanced form of the given chemical equation is as follows: 2N₂ + 0₂ → 2N₂0.
What is a balanced chemical equation?A chemical equation in chemistry is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.
A chemical equation results in the formation of new substances called products from substances called reactants.
However, to obey the law of conservation of mass, the atoms of each element on both sides of the equation must be the same. This is referred to as a balanced chemical equation.
The balanced form of the reaction between nitrogen and oxygen gas is given above.
Learn more about balanced equation at: https://brainly.com/question/7181548
#SPJ1
Two metal balls with the same mass hang so that they are touching each other. The ball on the left is pulled to the side
and released. What will happen when it swings back and hits the ball on the right?
Both balls will swing to the left.
The ball on the left will stop, and the ball on the right will remain still
The ball on the right will swing to the right.
Both balls will swing to the right.
When the ball on the left is pulled to the side and released, it will swing back and hit the ball on the right. Upon impact, the momentum of the left ball will be transferred to the right ball, causing the right ball to start swinging to the right while the left ball will come to a stop.
Therefore, the correct answer is: "The ball on the right will swing to the right." Option C
What is momentum about?In physics, momentum is a property of moving objects that is determined by both their mass and velocity. It is defined as the product of an object's mass and velocity, and it is a vector quantity, which means it has both magnitude and direction.
Mathematically, momentum (p) is expressed as:
p = m * v
where m is the mass of the object and v is its velocity.
Momentum is conserved in a closed system, meaning that the total momentum of the system remains constant unless an external force acts on it. This is known as the law of conservation of momentum, which is a fundamental principle of physics. The law of conservation of momentum has many practical applications, from understanding the behavior of collisions in billiards or car accidents, to designing spacecraft trajectories, to studying the behavior of subatomic particles
Learn more about momentum from
https://brainly.com/question/30366873
#SPJ1
A block with a mass of 2 kg sitting at rest on ice is pulled by a rope. The block achieves a velocity of 3
m/s, 4 seconds later, at a point 6 meters to the right of its starting point. If the blockís acceleration
was constant and the friction between the ice and block is negligible, which of the following is the
amount of work done by the force of the rope as it pulled the block through the first 6 meters?
O 117.6 J
36 J
9J
12 J
The amount of work done by the force of the rope as it pulled the block through the 6 meters is 9J.
The kinetic energy of the block is given by the formula
K = [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex]
where,
m = mass of the block
v = velocity
Initially, the block is at rest. After being pulled by rope for 4 seconds it has an initial velocity of 3 m/s. Therefore, its final initial velocity is
Kf = [tex]\frac{1}{2}[/tex](2 kg)[tex](3 m/s) ^{2}[/tex]= 9 J
change in kinetic energy
ΔK = Kf - Ki = 9 J - 0 J = 9 J
Therefore, The amount of work done by the force of the rope as it pulled the block through the 6 meters is 9J.
To learn more about, Kinetic energy
https://brainly.com/question/28109294
https://brainly.com/question/25959744
assume you have two objects of the same mass m and radius r. one object is a thin hoop, and the other object is a solid cylinder. which object has a larger moment of inertia i?
For two objects of the same mass and radius, the one with more mass concentrated farther away from the axis of rotation will have a larger moment of inertia. Therefore, the moment of inertia of a solid cylinder is greater than that of a thin hoop of the same mass and radius.
The moment of inertia of a thin hoop of mass m and radius r is given by:
I_{hoop} = mr²
The moment of inertia of a solid cylinder of mass m and radius r is given by:
I_{cylinder} = (1/2)mr²
From these equations, the moment of inertia of a solid cylinder is greater than that of a thin hoop of the same mass and radius.
Therefore, a solid cylinder has a larger moment of inertia compared to a thin hoop.
To learn more about moment of inertia:
https://brainly.com/question/14460640
#SPJ11
If ocean water did not move it would be hot in the _ region and frigid in the _ region
If ocean water did not move, it would be hot in the equatorial region and frigid in the polar regions.
Ocean currents are responsible for redistributing heat around the planet. Without these currents, the equatorial region would receive more sunlight and heat than it loses, resulting in an accumulation of heat in the water. On the other hand, the polar regions would lose more heat than they receive, resulting in frigid temperatures.
The rotation of the Earth also influences the movement of ocean water through the Coriolis effect. Without this effect, ocean currents would be less predictable, and their impact on climate and temperature distribution would be more severe. Therefore, ocean currents play a crucial role in regulating Earth's climate, and their disruption could have significant consequences for both marine life and global weather patterns.
To know more about frigid, here
brainly.com/question/19538832
#SPJ4
Consider a collar of mass m sliding on a frictionless shaft, as depicted in figure[4]. The collar can slide along the shaft and is connected to a spring of spring constant k, the other end of which is connected to the pivot point o a distance l from the shaft. The unstretched length of the spring is l. (a) how many degrees of freedom are there in this problem? describe the constraints, though you do not have to use formal equations. (b) find the equation of motion for the collar. (c) find an expression for the normal force vector between the collar and shaft as a function of x
(a) There is only one degree of freedom in this problem since the collar can move along the shaft but cannot rotate. The constraints are that the distance between the collar and the pivot point is always equal to l, and the collar cannot move perpendicular to the shaft.
(b) The forces acting on the collar are the spring force and the gravitational force. Since the collar is sliding along a frictionless shaft, there is no frictional force. The equation of motion for the collar is given by:
m(d²x/dt²) = -k(x-l) - mg
where x is the displacement of the collar from its equilibrium position.
(c) The normal force between the collar and the shaft is perpendicular to the shaft and balances the component of the gravitational force that is perpendicular to the shaft. As the collar moves away from its equilibrium position, the spring force becomes unbalanced and the normal force changes accordingly. The normal force is given by:
N = mgcos(θ) + k(x-l)sin(θ)
where theta is the angle between the shaft and the vertical axis.
To learn more about force refer to:
brainly.com/question/13191643
#SPJ4
what is the biggest state? (this has nothing to do with school im testing people)
maybe a meme
The biggest state in the United States by land area is Alaska also what the meme
Calculate how far a ball would be hit if it was hit at an angle of 25° and a velocity of 80 mph.
The ball would be hit if it was hit at an angle of 25° and a velocity of 80 mph, it will travel 1-8m.
What is velοcity ?The definitiοn οf velοcity is the rate at which a bοdy mοves in a particular directiοn. Velοcity is the rate at which a distance changes in relatiοn tο time. A vectοr quantity with bοth magnitude and directiοn is velοcity.
What is mass ?The amοunt οf matter in a bοdy is referred tο as its mass. The kilοgramme is the kilοgrams, which is the SI unit οf mass (kg). Mass is defined as: Mass = Density/Vοlume.
Therefοre, ball wοuld be hit if it was hit at an angle οf 25° and a velοcity οf 80 mph, it will travel 1-8m.
Learn more about velocity from the given link.
https://brainly.com/question/28187441
#SPJ1
A bullet with a mass of 7.91 g and a speed of 352 m/s penetrates a tree horizontally to a depth of 4.86 cm. What is the frictional force?
The frictional force acting on the bullet is 16.08 N. The force produced when two surfaces slide past one another and make contact is known as frictional force.
How does frictional force work?Friction is a force that prevents two solid objects from rolling or sliding over one another. Although frictional forces, such as the traction required to walk without slipping, may be advantageous, they can provide a significant amount of resistance to motion.
we need to use the equation for work done by friction.
The work done by friction is:
W = F_friction * d
F_friction = W / d
where F_friction is the frictional force.
To find the work done by friction, we need to use the kinetic energy equation:
KE = 1/2 * m * v^2
where KE = kinetic energy of the bullet, m = mass of the bullet, and v = velocity of the bullet.
W = KE
Substituting the values,
KE = 1/2 * m * v^2
KE = 1/2 * 0.00791 kg * (352 m/s)^2
KE = 0.782 J
So, the work done by friction is 0.782 J.
Now, we can use the given depth of penetration to find the distance over which the frictional force acts:
d = 0.0486 m
we can use the equation for the frictional force,
F_friction = W / d
F_friction = 0.782 J / 0.0486 m
F_friction = 16.08 N
To know more about the frictional force visit:
https://brainly.com/question/4618599
#SPJ4
Please help with this, Im a little stuck!!
Answer:
Jwbsbsbdjeiskbsj3kabajj2jjj1jj2j2j3jkkkk3j3j2
three objects a b c are placed 0.50 m apart along a straight line. If a and b have equal masses of 10.0kg and c has a mass of 15.0kg, what is the net gravitational force on b due to a and c?
The net gravitational force on b due to a and c is 5.338 x 10^-8 N.
What is the net gravitational force?The net gravitational force on b due to a and c can be calculated using the formula:
F = G (m1m2) / r^2
where;
F is the gravitational force, G is the gravitational constant (6.67 x 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between them.First, let's calculate the gravitational force between a and b:
F1 = G (m1m2) / r^2
= 6.67 x 10^-11 * (10.0 x 10.0) / (0.50/2)^2
= 1.067 x 10^-7 N
Next, let's calculate the gravitational force between b and c:
F2 = G(m2m3) / r^2
= 6.67 x 10^-11 (10.0 x 15.0) / (0.50/2)^2
= 1.67 x 10^-7 N
The net gravitational force on b due to a and c is the vector sum of these two forces:
Fnet = F2 - F1
= 1.67 x 10^-7 N - 1.067 x 10^-7 N
= 5.338 x 10^-8 N
Learn more about gravitational force here: https://brainly.com/question/27943482
#SPJ1
The question is attached
Answer:
The answer is B.
Explanation:
It is clear that the substance will be in liquid state above its melting point and below its boiling point.
A) This is incorrect. The substance is above the melting point but it is also above the boiling point (0 is greater than -183)
B) This is your correct answer. The substance is above the melting point and also below the boiling point.
C) This is incorrect. The substance is below both the melting point and the boiling point.
D) This is incorrect. The substance is drastically below the melting and boiling point.
Therefore , the only correct answer for this question would be B.