Predicting Moles Worksheet Directions: Show your work for the following calculations. Circle your answers. NO work = NO credit!!! 1. How many moles of methane (CH4) are needed to produce 5.75 moles of water vapor? (Assume excess oxygen.) CH4(g) + 202(g) → CO₂(g) + 2H₂O(g) I will give all 100 of my points just to get this worksheet out the way honestly. I'm getting too stressed out by my people just bc I can't do this singular worksheet ​

The result of the four trials by the student is precise to the actual weight of the lead block.

Since we have been alive for millions of years, we have acquired a sense of measurement, which is necessary for us to comprehend the outside world. Tools that provide scientists a number are necessary for measurements. The issue here is that every measurement, using any measuring device, has some level of uncertainty in the outcome. Error is the name given to this uncertainty. When taking measurements, accuracy and precision are two crucial considerations. These two phrases describe how closely a measurement resembles a value that is understood or accepted.

Accuracy refers to an instrument's capacity to measure exact values. It is, in other words, the degree to which the measured value resembles a standard or real value. Accuracy is possible by obtaining quick readings.

The precision of a substance is defined as the similarity between two or more measurements.

To know more about precision from the link

brainly.com/question/1695072

#SPJ4

The radiations that can emit electromagnetic energy with shorter wavelengths are these ones. Because metal surfaces reflect microwaves, Occurrences including refraction, diffraction, reflection, and interference have an impact on the transmission of microwaves.

To learn more about microwaves refer to:

https://brainly.com/question/1304742

#SPJ1

To calculate the gas constant using the data provided, you would use the ideal gas law equation: PV = nRT.

Assuming that the amount of propane (n) is given in moles and the volume (V) is given in liters, the ideal gas law equation can be rearranged to solve for R:

R = PV/nT

Given that the pressure (P) is 1.00 atm and the temperature (T) is 294.6 K, you can plug in these values and solve for R:

R = (1.00 atm) * (V) / (n) * (294.6 K)

Without knowing the exact values for V and n, it is not possible to determine the exact value for R. However, it is important to note that the units of R are L atm mol-1 K-1, and option A is the only choice that has the correct units, so the answer is A. 1.858 L atm mol-1 K-1.

To learn more about gas constant:

https://brainly.com/question/20348074

#SPJ4

Excessive burning of fossil fuels such as coal, oil, and natural gas can have a significant impact on our planet. The primary way in which burning fossil fuels affects the planet is through the release of greenhouse gases, such as carbon dioxide (CO2) into the atmosphere.

These gases trap heat from the sun, which causes the Earth's temperature to rise, a phenomenon known as global warming. This can lead to a variety of negative effects, such as:

Climate change: The increase in temperature can cause more frequent and severe weather events such as heat waves, droughts, and floods. It can also cause sea levels to rise and glaciers to melt, leading to coastal flooding and changes in precipitation patterns.

Loss of biodiversity: Warmer temperatures can cause species to migrate or die out, leading to a loss of biodiversity. Changes in precipitation patterns can also affect the survival of certain species.

Ocean acidification: The ocean absorbs a large amount of CO2, which can cause the pH of seawater to decrease, making it more acidic. This can harm marine life, especially those that have shells or skeletons made of calcium carbonates, such as coral and certain types of plankton.

Learn more about global warming here:

https://brainly.com/question/12908180

#SPJ4

The mole fraction, the partial pressure of SF6, the mole fraction of N2F2, the partial pressure of SF6, the partial pressure of N2F2, and the total pressure in the tank are all 0.62, 1.18, and 0.72 atm, respectively.

We must first determine how many moles of each gas are present in the tank in order to calculate their mole fraction and partial pressure. You can use the equation 8.5 / (8.5 + 5.2) = 0.62 if the tank is filled with 8.5 moles of sulfur hexafluoride gas and 5.2 moles of dinitrogen difluoride gas.

Nitrous oxide mole fraction is calculated as follows: (moles of N2F2) / (moles of total both gases) = 5.2 / (8.5 + 5.2) = 0.38.

The ideal gas law, PV = nRT, can be used to determine the tank's overall pressure. The total pressure in the tank can be calculated using the volume of the tank and the number of moles of each gas, assuming a constant temperature.

The formula below to determine the temperature and tank volume if the temperature is 25 degrees Celsius and the tank has a volume of 12 liters.

(Total Pressure) = (8.314 J/mol × K)(298 K) / (12L) (Total Moles).

Approximately is the total tank pressure.

Nine atmospheres.

Then: when considering SF6 partial pressure.

1.18 atm is equal to (0.62) × 1.9 atm.

N2F2 has the following partial pressure:

0.38 and 1.9 atm equals 72 atm.

To learn more about mole fraction and partial pressure at

https://brainly.com/question/30235823?referrer=searchResults

#SPJ4

The element whose mass number is 115 and contains 65 neutrons per atom, its atomic number will be-

Atomic Number (Z) = Mass Number (A) - Number of Neutrons (N)

Z = 115 - 65

Z = 50

So, the atomic number for the given element is 50.

Tin is the element with the symbol Sn which has an atomic number of 50. Tin is classified as a post-transition metal. Tin is a silver-coloured metal and remains solid at room temperature.

The atomic number is the number of protons in an atom. Due to this, it is sometimes named the proton number. The atomic number is indicated by the letter Z. The symbol Z is derived from the German word Zahl, which means several numerals.

To know more about atoms, visit here:

https://brainly.com/question/13654549

#SPJ4

1.81 x 10^24 Br-ions are present in 1.00 moles of FeBr3

Avogadro's number of representative particles is included in one mole of a substance.

6.02 x 1023 particles make up 1 mole.

How many of each sort of atom there are in a typical particle is indicated by the chemical formula of the molecule. One mole of iron(III) ions and three moles of bromide (Br-) ions make up the formula FeBr3, which states that. The quantity of Br- ions is thus:

1.81 × 1024 Br- ions from 3 x 6.0223

When thinking about atoms and molecules, a mole is a helpful unit of measurement. Compounds are created when modest whole-number ratios of atoms mix. Quantities are reported in moles for the purpose of employing mathematical relationships in computations since atoms of various elements have different masses. For instance, the proportion of iron(III) ions to bromide ions in FeBr3 is the same as the proportion of moles of iron(III) ions to moles of bromide ions, but not the proportion of masses of the two types of ions.

Learn more about br- ions   here:

https://brainly.com/question/14126889

#SPJ4

The pH of the solution prepared by dissolving 8.00 g of NaOH in 5.00 L of water is 12.598.

It is evident that from the given information, 8.00 g of NaOH (which is a strong base) has been dissolved in 5.00 L of water. So to calculate the pH of a solution we can use the formula:

m = n / M.                     Given :

n = 8.00 g / 40.00 g/mol = 0.200 mol

M = 40.00 g/mol

m = 0.200 mol / 5.00 L = 0.04 mol/L

By knowing  the concentration of hydroxide ions, we can use the relationship:

[OH-] = 10^(-14) / [H+]

pH = -log[H+]

The product of [H+] and [OH-] is always equal to 10^(-14) at 25 degree Celsius. Hence,

[H+] * [OH-] = 10^(-14)

[OH-] = 10^(-14) / [H+]

Substituting the value of [OH-] in the above equation.

pH = - log(10^(-14) / 0.04 ) =

pH = - log(2.5*10^(-13)) =

Therefore, the pH of the solution is 12.598.

Find more numerical on The pH of a solution from: https://brainly.com/question/29364198

The number of moles of the oxygen that have been produced is 51.9 moles.

We know that we can be able to use the stoichiometry of the reaction to be able to obtain the reactants and the products of the reaction. In this case we have the decomposition of the aluminum oxide.

We know that;

Number of moles of the aluminum oxide = 34.6 moles

If 2 moles of the aluminum oxide produces 3 moles of oxygen

34.6 moles of the aluminum oxide would produce

34.6 * 3/2

= 51.9 moles

Learn more about decomposition reaction:https://brainly.com/question/16987748

#SPJ1

Answer:

169.364 amu

Explanation:

Hey there!

To find the molecular weight, you have to first convert this into a chemical formula:

C5H8NO4Na

Now we have to find the mass for each of the elements and add them up to get our final answer

(12.06x5) + (1.008 x 8) + (14.01) + (16 x 4) + (22.99)

Adding all of it up we get:

169.364 amu

Based on the given information, B: Ethanol is the compound that has the strongest intermolecular forces.

Intermolecular forces (IMF) are the forces that hold molecules of a substance together. The strength of IMF is directly related to the boiling point of a substance. So, the stronger the IMF, the higher the boiling point will be.

The information provides the heat of vaporization (DHvap) for each substance, which is the energy required to convert a liquid into a gas. The higher the DHvap value, the stronger the IMF because more energy is required to overcome the forces that hold the molecules together.

When comparing the DHvap values, we can see that Ethanol (C2H5OH) has the highest DHvap value of 39.3 kJ/mol, followed by water (H2O) with 40.8 kJ/mol. This means that ethanol has stronger intermolecular forces than water, that's why ethanol has a higher boiling point than water.

Therefore, based on the DHvap values, Ethanol has the strongest intermolecular forces.

You can learn more about DHvap values at

https://brainly.com/question/28810587

#SPJ4

Given,

Amount of sodium atoms = 46 grams

To find,

The total number of sodium atoms present in the given amount of sodium atoms.

We can simply solve this numerical problem by using the following process:

As per stoichiometry;

1 mole of any element contains Avogadro's number of atoms, that is, 6.022 x 10^23 atoms.

And, the molar mass of any element is equal to the atomic mass of the same element.

=> If the given amount of an element/compound is equal to its molar mass, then it contains 6.022 x 10^23 atoms/molecules.

=> Total number of atoms/molecules present in the given amount of the element/compound

= (total given mass)/(molar mass) x 6.022 x 10^23

Now,

the molar mass of sodium = 23 grams

Total number of sodium atoms present in the given amount of sodium atoms

= (total mass)/(molar mass) x 6.022 x 10^23

= 46 grams / 23 grams x 6.022 x 10^23

= 2 moles x 6.022 x 10^23

= 12.044 x 10^23 = 1.2044 x 10^24 atoms

Hence, 1.2044 x 10^24 sodium atoms are present in the given amount of sodium atoms.

Answer: B: a solvent

Explanation: I hope this helps!

Answer:

B. increase

Explanation:

the pressure will increase because there is more molecules inside the container

The mass of NO2 produced by the reaction is 24.61g when the initial mass of 16.07g NO, an excess of O2 is converted to product NO2.

Given the chemical reaction: 2NO(g) + O2(g) + 2NO2(g)

The equation is balanced.

The initial mass of NO is (m) = 16.07g

Here first we calculate the number of moles of NO is used = mass/Molar mass of NO

moles of NO used = 16.07/30 = 0.535

An excess of O2 is used so we can neglect that.

Now calculate the moles of NO2 produced.

moles of NO2 =  0.535 x 2 mol(NO2) / 2mol(NO) =  0.535

we can determine that NO is the limiting reactant.

To convert from moles to mass, use the product's molar masses.

Molar mass of NO2 = 46g/mole

Then the mass of NO2 produced = 0.535 x 46 x 1 = 24.61g

Hence the mass of NO2 produced by the reaction is 24.61g

To learn more about reactant click here https://brainly.com/question/17096236

#SPJ4

The amount of AlCl3 that may be created from 22.0g of Al is shown by this equation.

22.0g Al multiplied by (1 mol Al/26.98g) by (2 mol AlCl3/2mol Al) by (133.34 g/1mol AlCl3) results in 108.66g AlCl3.

This equation illustrates the amount of AlCl3 that may be created from 27.0g of Cl2.

33.87g AlCl3 is obtained by multiplying 27.0g Cl2 by (1 mol Cl2/70.91g) x (2mol AlCl3/3 mol Cl2) x 133.34g.

This demonstrates that the limiting reactant is chlorine. The maximum amount of AlCl3 that can be created before the chlorine runs out is 33.87 grams.

The solution, using significant digits, is 33.8g of AlCl3.

To learn more about mass of aluminum chloride:

https://brainly.com/question/14799692

#SPJ4

The bromobenzene used in the experiment was equimolar to 3.7 grams of benzophenone. The correct answer is C. 

The stoichiometry of a chemical reaction tells us the relative amounts of reactants and products involved in the reaction. In this case, the reaction is between bromobenzene and benzophenone to form a new compound.

The balanced equation for this reaction is:

From the equation, we can see that one mole of bromobenzene reacts with one mole of benzophenone. Therefore, an equimolar amount of benzophenone is the same as the amount of bromobenzene used in the experiment. Since the molar mass of benzophenone is 182.23 g/mol, we can use this value to calculate the mass in grams by multiplying it with the number of moles.

To calculate the equimolar amount of benzophenone, we use the following formula:

Let's assume that the mass of bromobenzene used in the experiment is x. Hence:

Therefore, the equimolar amount of benzophenone is 3.7 grams.

This question should be provided with answer choices, which are:

The correct answer is C.

Learn more about stoichiometry here: brainly.com/question/25829169

#SPJ4

The de Broglie wavelength of a particle is given by the equation:

λ = h / p.

Where λ is the de Broglie wavelength, h is Planck's constant (6.62607015 x 10^-34 Js) and p is the momentum of the particle.. The de Broglie wavelength of an oxygen molecule at room temperature is on the order of 4.8 x 10^-10 m. This wavelength is much smaller than the average distance between oxygen molecules in a gas at 1 atm, which is about 2 x 10^-10 m. This means that the de Broglie wavelength of an oxygen molecule is much smaller than the distance between the oxygen molecules and it is not possible to see the interference or diffraction patterns of individual molecules in most cases.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ4

This conclusion that coastal California would be an excellent location to drill for oil is most likely based on:

D. Historical data revealing little or no chance of an oil spill.

The conclusion that coastal California will be ideal for oil drilling is based on the historical data that was examined by the analysts. This is a very good way of making environmental and business decisions.

If past data shows that a given trend or pattern is evident, then, intentional businesses should be able to base their findings on these.

Learn more about data here:

https://brainly.com/question/26711803

#SPJ1

Noble gases are very less reactive. The correct is noble gases e) do not bond.

The noble gases are the very less reactive. The valence shell or the outer most shell are fully filled and this is the reason it can not share the electrons or gain the electrons to form the bond. The noble gas are belongs to the group 18 in the periodic table. The noble gases are : helium, neon, argon, krypton, xenon and the radon. They are non reactive gases and called as inert.

Thus, The noble gases don not form the chemical bond and they are very stable.

To learn more about noble gases here

https://brainly.com/question/14114037

#SPJ4

Subscript of [tex]H_2[/tex] is number indicating that [tex]H_2[/tex] contains two hydrogen atoms.

A subscript is a character that is printed slightly below and to the side of another character, commonly a letter or a number.

Chemists frequently employ subscripts in their formulations. When writing the chemical formula for water, H2O, a scientist would place the number 2 lower and smaller than the letters to either side of it.

To display the number of electrons in a specific sublevel, use superscripts.

Thus, the subscript of hydrogen represents the number of atoms.

For more details regarding subscript, visit:

https://brainly.com/question/14824489

#SPJ1

The balanced equation states that for every 6 moles of HNO3 consumed, 2 moles of H2O are produced.

In this case, we are given that 96.00 moles of HNO3 are consumed in the reaction. To find the number of moles of H2O produced, we can use the stoichiometry of the balanced equation. We know that for every 6 moles of HNO3 consumed, 2 moles of H2O are produced. Therefore, we can use the proportion: 2 moles H2O/ 6 moles HNO3 = x moles H2O / 96.00 moles HNO3. Solving for x gives: x = (2 * 96.00) / 6 = 16 moles of H2O are produced when 96.00 moles of HNO3 are consumed. It's important to note that the balanced equation provides the stoichiometry of the reaction which helps us to calculate the number of moles of product produced from the given number of moles of reactant. The balanced equation also tells us that the reaction is stoichiometrically balanced and the number of moles of reactant and product are in a defined ratio.

Learn more about moles here:

https://brainly.com/question/29367909

#SPJ4

The number of moles of water that are produced from the reaction of the combustion of 0.20 moles of ethane, C₂H₆ is 0.6 moles.

The number of moles of water that are produced from the reaction of the combustion of 0.20 moles of ethane, C₂H₆ is obtained from the mole ratio as given in the equation of the reaction.

The equation of the reaction is given below as follows:

2 C₂H₆ + 5 O₂ ---> 2 CO₂+ 6 H₂O

From the equation of the reaction, 6 moles of water are produced from the combustion of 2 moles of ethane.

The mole ratio is 1 : 3

The number of moles of water produced from 0.2 moles of ethane = 0.2 * 3 moles

The number of moles of water produced = 0.6 moles

Learn more about mole ratio at: https://brainly.com/question/26023

#SPJ1

Complete question:

How many moles of H₂O is formed from 0.20 moles of C₂H₆?

Equation of the reaction: 2 C₂H₆ + 5 O₂ ---> 2 CO₂+ 6 H₂O

Metals react with water and produce a metal oxide and hydrogen gas. Metal oxides that are soluble in water dissolve in it to further form metal hydroxide. When a metal and water react.

metal oxide and hydrogen gas are formed. The fundamental equation for the metal reaction with water is metal + water = metal oxide + hydrogen. Cold water swiftly reacts with the metals sodium, potassium, and calcium to generate hydroxides. In most cases, they react with water to generate bases or with acids to form salts. MO + H2O M(OH)2 (M = a group 2 metal) As a result, these compounds are frequently referred to as basic oxides. Magnesium oxide, for example, interacts with water to generate magnesium hydroxide, which turns red litmus blue, showing that it is a base. Magnesium oxide + Water Magnesium hydroxide is the chemical formula for this reaction.

learn more about metal oxide  here:

https://brainly.com/question/22966565

#SPJ4

Answer: a. The electron configuration for sodium (atomic number 11) is:

1s² 2s² 2p⁶ 3s¹

b. The electron configuration for iodine (atomic number 53) is:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹0 4p⁶ 5s² 4d¹0 5p⁵

c. The electron configuration for iron (atomic number 26) is:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶

Answer:

The equilibrium constant for the reversible reaction N2(g) + 3H2(g) <---> 2NH3 at 400 degrees Celsius is given by K = [NH3]2/[N2][H2]3 = (0.0357)2/(0.0420)(0.516)3 = 0.000457.

The freezing point of a solution made by mixing 56.5 grams of NaCl and 615.0 grams of water -5.84 °C.

The freezing point depression that occurs in water when mixing 56.5 grams of NaCl and 615.0 grams of water is determined using the freezing point depression formula as given below:

ΔTf = Kf * m * i

where;

ΔTf is the freezing point depression

Kf is a constant

m is the molality of the solution

i = constant

For the given solution;

Kf = 1.86

i = 2 (NaCl produces two ions)

Molality = moles of solute/mass of solvent in kg

Mass of solvent = 615.0 g or 0.615 kg

Moles of NaCl = mass / molar mass

Molar mass of NaCl = 58.5

Mass of NaCl = 56.5

Moles of NaCl = 56.5/58.5

Moles of NaCl = 0.966 moles

Molality = 0.966/0.615

Molality = 1.57 molal

ΔTf = 1.86 * 1.57 * 2

ΔTf = 5.84

The freezing point of solution = 0 - 5.84

The freezing point of solution = -5.84 °C

Learn more about freezing point depression at: https://brainly.com/question/24314907

#SPJ1

Flask a contains molecules of oxygen and hydrogen which are gases while flask b contains molecules made up of both oxygen and hydrogen I.e water.

go through the given link below to know more about molecules:-

https://brainly.com/question/26044300

#SPJ4

The half-life of carbon-12, the most common isotope of carbon, is approximately 5,730 years.

This means that after 5,730 years, half of the original amount of carbon-12 in a sample will have decayed into a stable isotope (nitrogen-14). Therefore, it would take approximately 11,460 years for three quarters of the original amount of carbon-12 in a sample to become stable. Importantly, carbon-12 is not radioactive and hence does not decay into a stable isotope, but it is used in carbon dating because it is a stable isotope of carbon. Dating depends on the decay of other isotopes, such as carbon-14 or radiocarbon.

Learn more about carbon 12 here: brainly.com/question/2113137

#SPJ4

The time that the object was moving is 139.6 seconds.

To determine the time (t) that the object was moving, you can use the formula:

t = d

    v

where,

d = the distance the object travels

v = its velocity

d = 45.6 m

v = 0.327 m/s

Substituting the given values:

t = 45.6 m

    0.327 m/s

t = 139.6 seconds

Hence, the time that the object was moving is 139.6 seconds.

Learn more about Calculating the time on

https://brainly.com/question/24304505

#SPJ1