Please help need ASAP!!! Due tonight,
Name the Compounds. Spelling counts
SiCl4
N2O4

Answer:

Explanation:

Oleic acid originates from an unsaturated fatty acid with 18 carbon atoms and one double bond, which can be found in olive oil and many other vegetable and animal oils and fats. Its economic importance includes the production of soap making and cosmetics etc.

The line-bond structure of the given oleic acid in the question can be found in the attached below.

The line-bond structure of oleic acid is given in the image attached. The line-bond structure represents the number of carbon atoms.

Oleic acid is an omega-9 fatty acid. It can be made by the body. It is also found in foods. Highest levels are found in olive oil and other edible oils. Oleic acid is most commonly used for preventing heart disease and reducing cholesterol. It is long chain of 18 Carbon atoms.

It is found in oils such as olive, palm, peanut, and sunflower.

Find more information about Oleic acid here:

brainly.com/question/26651977

Answer:

The answer is

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question

mass of liquid = 0.165 g

Next we change the volume from L to mL using the conversion

1 L = 1000 mL

We have

If 1 L = 1000 mL

Then 0.000295 l = 1000 × 0.000295

volume = 0.295 mL

The density is

[tex]density = \frac{0.165}{0.295} \\ = 0.55932203...[/tex]

We have the final answer as

Hope this helps you

Because things that are burnt have been changed into something else like moldy bread thats cooked.

It is chemical change because you cannot unburn something.

Answer:

It's a chemical change because I'm really good at answers

Explanation:

Answer:

speed = 3.7/46 = 0.080m/s

d= 3.7m

t= 46s

Explanation:

Answer:

its 4

Explanation:

Answer:

4 is the answer

Explanation:

2 fingers plus 2 fingers is 4 fingers, Not 1,250

Answer:

wdescribes the probability of finding an electron in space.

Explanation:

The quantum mechanical model of the atom assigns wave properties to the electron. This is in accordance with Heisenberg's uncertainty principle.

The probability of finding the electron in a given volume element is given as the square of the wave function while the wave function itself does not really have a physically significant meaning.

However, the wave function is a mathematical function that contains a detailed information about the behavior of an electron.

The higher Gas pressure inside the balloon. Hence, option A is correct.

In a molecule, the kinetic energy existing is "directly proportional" to the temperature of the molecule. If one of the values increases, then the other value also increases and vice-versa.

The higher Gas pressure inside the balloon. As the number of collisions with the wall of the balloon increases, the pressure inside increases.

Hence, option A is correct.

Learn more about kinetic energy here:

https://brainly.com/question/12669551

#SPJ5

Answer:

8721.132 Kg.

Explanation:

The following data were obtained from the question:

Density (D) of silver = 10.5 g/cm³

Length (L) of silver = 0.94 m

Mass (m) of silver =.?

Next, we shall determine the volume of silver. This can be obtained as follow:

Volume = Length × Length × Length

Volume = L × L × L

Volume = L³

Length (L) of silver = 0.94 m

Volume (V) of silver =?

Volume (V) of silver = 0.94³

Volume (V) of silver = 0.830584 m³

Next, we shall convert 0.830584 m³ to cm³. This can be obtained as follow:

1 m³ = 1×10⁶ cm³

Therefore,

0.830584 m³ = 0.830584 m³ / 1 m³ × 1×10⁶ cm³

0.830584 m³ = 830584 cm³

Therefore, 0.830584 m³ is equivalent 830584 cm³.

Thus, the volume of the silver is 830584 cm³.

Next, we shall determine the mass of the silver. This can be obtained as follow:

Density (D) of silver = 10.5 g/cm³

Volume of the silver = 830584 cm³.

Mass of silver =.?

Density = mass /

10.5 = mass of silver /830584

Cross multiply

Mass of silver = 10.5 × 830584

Mass of silver = 8721132 g

Finally, we shall convert the mass of silver, 8721132 g to kilogram (kg). This can be obtained as follow:

1000 g = 1 Kg

Therefore,

8721132 g = 8721132 g / 1000 g × 1 Kg

8721132 g = 8721.132 Kg

Therefore, the mass of each cube of silver is 8721.132 Kg

Answer:

The number of valence electrons determines an element's reactivity, or how likely the element is to react with other elements.

Explanation:

Answer:

Diet Dr. Pepper

Explanation:

The density of an object and the liquid involved determines if that particular object will float or sink in the particular liquid. An object will FLOAT if its density is lower than that of the liquid substance while it will SINK if its density is higher than that of the liquid substance.

In this case, water (lake) is the liquid substance. According to the question, an unopened 350 mL can of DIET Dr. Pepper will float in a lake because it is less dense than the water while an unopened 350 mL can of REGULAR Dr. Pepper will sink because it is more dense than water.

Hence, the DIET type of soda is the least dense

Answer:

They have three to six valence electrons, so they can lose or gain electrons.

Explanation:

Here, we are required to identify how the number of Valence electrons on atoms of metalloids explain why metalloids are semiconductors.

Metalloids are elements in the periodic table which are characterized by the the presence of 3 to 6 Valence electrons.

Ultimately, the presence of three to six Valence electrons and the ability to either lose or gain electrons is the criteria for their semiconductor character.

Read more:

https://brainly.com/question/2708814

Answer:

[tex]C_{10}H_{8}+12O_2\rightarrow 10CO_2+4H_2O[/tex]

Explanation:

Hello,

In this case, since combustion reactions yield carbon dioxide and water via the following equation:

[tex]fuel+O_2\rightarrow CO_2+H_2O[/tex]

In such a way, for naphthalene, its combustion reaction is:

[tex]C_{10}H_{8}+12O_2\rightarrow 10CO_2+4H_2O[/tex]

Whereas we see ten carbon atoms, eight hydrogen atoms and twenty four oxygen atoms at both reactants and products as a proof of the law conservation of mass.

Regards.

Answer: NH4)2CO3

Explanation:

Ionic solids are the solids that are simply held together by ionic bonds. Ionic bonds are lattices that are typically made up of oppositely charged ions and they usually possess a high melting point.

An example of ionic bond is NH₄)₂CO₃ which is referred to as Ammonium carbonate. This is a salt and it readily degrades upon heating to carbon dioxide and gaseous ammonia.

Answer:

copper(II) carbonate

Answer:

we will except an increase in the polarity of the system and this will cause the Non-polar spot to be near the solvent front, while the polar spot will run at an approximate speed of 0.5 Rf

Explanation:

when we run a TLC plate in a 50/50 mixture of hexanes and ethyl acetate we will except an increase in the polarity of the system and this will cause the Non-polar spot to be near the solvent front, while the polar spot will run at an approximate speed of 0.5 Rf

The speed of the polar spot depends largely on the level of polarity, an increase in the polarity will see both spots of Neat hexane run when we run a TLC  plate in a 50/50 mixture of hexanes and ethyl acetate

Answer:

You need the mass of Mg and Ca in the sample and their molar masses

Explanation:

Its the only answer that made sense because using those 4, can give you their ration

The Columns in the table that provides the information necessary for the calculating the mole ratio of Ca to Mg are columns ; 3, 4, 6, and 7

Although some data related to your question is missing attached below is the missing data

Determining the mole ratio of Ca to Mg

           Ca         :        Mg

mass of Ca / molar mass  :  mass of Mg / Molar mass

( 36.1 / 40.1 )  :  ( 2.4 / 24.3 )

9.14  : 1

∴ The mole ratio of Mg to Ca

≈  1 : 9

Where: Column 3 = Mass of Mg in the sample ( g )

            Column 4 = mass of Ca in the sample  ( g )

             Column 6 = Molar mass of Mg ( g/mol )

             Column 7 = molar mass of Ca ( g/mol )

Hence the Mole ratio of Mg to Ca = 1 : 9

learn more : https://brainly.com/question/15371665

Answer:

Bo

Explanation:

Bo is not a element

Answer:

2 moles of aluminum

Explanation:

Answer:

46.875

Explanation:

P.E=MGH

7500=16*10*h

7500=160h

h=7500/160

h=46.875

Answer:

Density, d = 1.779 g/cm³

Explanation:

The density of a material is given by its mass per unit volume.

Here, height of a piece of magnesium cylinder, h = 5.62 cm

Its diameter, d = 1.34 cm

Radius = 0.67 cm

Volume of he cylinder,

[tex]V=\pi r^2 h\\\\\text{Putting the value of r and h, we get :}\\\\V=(\pi \times (0.67)^2\times 5.62)\ cm^3[/tex]

[tex]d=\dfrac{m}{V}\\\\d=\dfrac{14.1\ g}{(\pi \times (0.67)^2\times 5.62)\ cm^3}\\\\d=1.779\ g/cm^3[/tex]

So, the density of the sample is 1.779 g/cm³.

Answer:

0.09865M of NaOH

Explanation:

As a diprotic acid, 1 mole of oxalic acid reacts with 2 moles of NaOH as follows:

H2C2O4 + 2 NaOH → 2 H2O + Na2C2O4

With the mass of the acid and its molar mass we can obtain the moles of oxalic acid. Twice these moles are the moles of NaOH in the solution. As you required 23.64mL = 0.02364L of the NaOH, you can knkow molarity, thus:

Moles Oxalic acid:

0.147g * (1mol / 126.07g) = 1.166x10⁻³ moles Oxalic acid.

Moles NaOH:

1.166x10⁻³ moles Oxalic acid * (2 moles NaOH / 1 mole H2C2O4) = 2.332x10⁻³ moles NaOH

Molarity:

2.332x10⁻³ moles NaOH / 0.02364L =

Answer:

The option D is correct answer.

Decaying pants and animals are important to the ecosystem as they return the nutrients to the soil.

Ecosystem is defined as a system which consists of all living organisms  and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles  and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/19267717

#SPJ2

Answer: Option A.

does work that can depend on the path of motion.

Explanation:

A non-conservative force acting on a particle does work that can depend on the path of motion because a non conservative force is a type of force that can remove energy from a progressive system and this energy cannot be restored back and the forces are path dependent because it matters where the particle begin or end.

It is a type of force such as friction or air resistance. This type of force does work that only depend on the path of motion.

Answer:

Explanation:

Polyatomic ions are ions (usually anions) that are made up of more than one atom. In order to determine the charge of anions, one can first identify the charge of the metal (which forms the cation) in a compound (which is usually easy to know) before predicting the charge of the anion. The charges are usually exchanged to form denominator of the other reacting atom/molecule, but if divisible, they are divided first before the exchange.

(a) The polyatomic ion in KNO₂ is NO₂ with the ionic equation below showing it's charge

KNO₂  ⇒ K⁺ + NO₂⁻

From the above, we can deduce that the charge of NO₂ is "1-"

(b) The polyatomic ion in CaSO₄ is SO₄ with the ionic equation below showing it's charge

CaSO₄ ⇒ Ca²⁺ + SO₄²⁻

The charge of SO₄ from the above equation is "2-"

(c) The polyatomic ion in Mg(NO₃)₂ is NO₃ with the ionic equation below showing it's charge

Mg(NO₃)₂   ⇒ Mg²⁺  +  NO₃⁻

From the above equation, it can be deduced that the charge of NO₃ is "1-"

Answer:

Q = 3937.56  J

Explanation:

Heat transferred due to change in temperature is given by :

[tex]Q=mc\Delta T[/tex]

c is the specific heat of water, c=4.18 J/g-°C

We have, m = 15 g, [tex]T_i=100^{\circ} C\ \text{and}\ T_f=37.2^{\circ} C[/tex]

So,

[tex]Q=15\times 4.18\times (37.2-100)\\Q=-3937.56\ J[/tex]

Hence, 3937.56  J of heat is transferred.

Explanation:

Time = Distnace ×speed

so distance is 2000m

and speed is 100

so 100×2000

time = 200000s

Answer:

there are 2970000cm in 29.7km

Explanation:

Answer:

24.0g H2O

Explanation:

1.33 mol (18.016g/1 mol) = 24.0g H2O