Please help me with these questions... please..

Imagine you are a scientist who has just discovered a new element. The element has an atomic number of 113, and it has three elections in the outer energy level of each atom.
Which element would have properties most similar to the new element?
Group of answer choices

A.boron
B.carbon
C.hydrogen
D.beryllium

What would you name this new element?

Answer:

The versions of an element with different neutrons have different masses and are called isotopes. The average atomic mass for an element is calculated by summing the masses of the element's isotopes, each multiplied by its natural abundance on Earth.

Explanation:

Answer:

ductile - germanium

mellabe - zirconium

Answer:

Diversity?

Explanation:

Think thats bio

Hello there!

Your answer is C.

Answer:

The right option is; A. It is younger than the rock layer below.

Explanation:

A rock layer deposited on top of another rock layer is younger than the rock layer below. This is based on the law of superposition which states that in any undeformed sequence of rocks that are laid down in layers, the youngest layer of rock will be on top of the sequence, while the oldest layer will be at the bottom of the sequence.

Answer:

The substance is phosphorus or D!

Hope this helps!

Answer:

eon,era,period,epoch,and age

Answer:

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the new pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

From the question we have

[tex]P_2 = \frac{11.2 \times 0.86}{15} = \frac{9.632}{15} \\ = 0.64213333...[/tex]

We have the final answer as

Hope this helps you

Given:

Initial Volume [tex] \sf (V_1) [/tex] = 11.2 L

Initial Pressure [tex] \sf (P_1) [/tex] = 0.860 atm

Final Volume [tex] \sf (V_2) [/tex] = 15.0 L

To Find:

Final Pressure [tex] \sf (P_2) [/tex]

Concept/Theory:

[tex] \bf{ \underline{Boyle's \: Law} \: (Pressure - Volume \: Relationship)}[/tex]

"At constant temperature, the pressure of a fixed amount of gas varies inversely with the volume of the gas."

[tex] \bf{P \propto \dfrac{1}{V} \: (at \: constant \: T \: and \: n)}[/tex]

It can be also stated as "At constant temperature, the product of pressure and volume of fixed amount of a gas remains constant."

[tex] \bf{PV = Constant}[/tex]

If the initial pressure and volume of a fixed amount of gas at constant temperature are [tex] \sf (P_1) [/tex] & [tex] \sf (V_1) [/tex] and final pressure of the gas is [tex] \sf (P_2) [/tex] and volume occupied is [tex] \sf (V_2) [/tex], then according to Boyle's law;

[tex] \bf{P_1V_1 = P_2V_2 = Constant}[/tex]

OR

[tex] \bf{\dfrac{P_1}{P_2} = \dfrac{V_2}{V_1}}[/tex]

Answer:

By using Boyle's Law, we get:

[tex] \rm \longrightarrow \dfrac{0.860}{P_2} = \dfrac{15.0}{11.2} \\ \\ \rm \longrightarrow P_2 = \dfrac{11.2}{15.0} \times 0.860 \\ \\ \rm \longrightarrow P_2 = \dfrac{9.632}{15.0} \\ \\ \rm \longrightarrow P_2 = 0.642 \: atm[/tex]

[tex] \therefore [/tex] Final Pressure [tex] \sf (P_2) [/tex] = 0.642 atm

The energy of a wave : 8.835.10⁻¹⁷ J

The energy in one photon can be formulated as

Where

h = Planck's constant (6.626.10⁻³⁴ Js)

f = Frequency of electromagnetic waves

f = c / λ

c = speed of light

= 3,10⁸  m/s

λ = wavelength

λ = wavelength  of a wave = 2.25 nm = 2.25 x 10⁻⁹m

[tex]\tt E=h.\dfrac{c}{\lambda}\\\\E=6.626.10^{-34}\times \dfrac{3.10^8}{2.25.10^{-9}}\\\\E=8.835\times 10^{-17}~J[/tex]

Answer:

This is man made and natural

Answer:

Ajay should pass electric current through the water and connect a bulb to the circuit. If the bulb glows, it means that the water is tap water or else, it is distilled water.

Explanation:

This is because tap water contains little impurities like ions of some salts etc., which help in the conduction of electricity. But, distilled water is pure water and doesn't have any ions present in it. So, it doesn't conduct electricity.

Hope this helped

Ajay can test the distilled water by performing the electricity conduction test.

Distilled water has been the water that has an absence of ions and electrolytes. It has been a poor conductor of electricity.

The tap water has been constituted with minerals, electrolytes, and impurities, which results in the addition of conductivity to the water.

To test whether the water has been distilled or not, the circuit test can be performed The water has dipped wires connected with a battery and a bulb. the distilled water is a poor conductor did not allow the bulb to glow. However, with tap water bulb glow.

Thus, to test the water to be distilled or tap, the electricity conduction test has been performed.

For more information about distilled water, refer to the link:

https://brainly.com/question/2403536

Answer:

Check explanation section.

Explanation:

In order to understand balanced force and unbalanced forces the first law of Newton should be considered as a basic knowledge.

For Balanced forces, there is equal equality in the direction of the forces. In balanced forces, there is no acceleration.

For unbalanced forces, there is acceleration that is go say there is going to be movement. Therefore, net force is equal to unbalanced forces.

(i) Suitcase dropped from a height.

Answer: since there is movement that is acceleration, then the force here is unbalanced force. The resultant force is downwards.towards the greater force direction.

(ii) A bicycle moving with constant velocity on a straight road.

Answer: As the bicycle moves at constant velocity on the straight road the force here is Balanced. Frictional forces balances the forces from the cyclist.

(iii) The rope does not move in a tug of war on applying force at both ends.

Answer: Balanced force.

Answer:

6 days

Explanation:

The following data were obtained from the question:

Original amount (N₀) = 100 mg

Amount remaining (N) = 6. 25 mg

Time (t) = 24 days

Half life (t½) =?

Next, we shall determine the decay constant. This can be obtained as follow:

Original amount (N₀) = 100 mg

Amount remaining (N) = 6. 25 mg

Time (t) = 24 days

Decay constant (K) =?

Log (N₀/N) = kt / 2.303

Log (100/6.25) = k × 24 / 2.303

Log 16 = k × 24 / 2.303

1.2041 = k × 24 / 2.303

Cross multiply

k × 24 = 1.2041 × 2.303

Divide both side by 24

K = (1.2041 × 2.303) / 24

K = 0.1155 /day

Finally, we shall determine the half-life of the isotope as follow:

Decay constant (K) = 0.1155 /day

Half life (t½) =?

t½ = 0.693 / K

t½ = 0.693 / 0.1155

t½ = 6 days

Therefore, the half-life of the isotope is 6 days

Answer:

1)conduction

2) convection

3) conduction

4) radiation

5) radiation

6) radiation

7) conduction

8) conduction

9) radiation

10) convection

Explanation:

not 100% sure

Answer:

LI

Explanation:

There is three Li in the start but One Li after

Answer:

How much electricity is uses and any repairs

Explanation:

When purchasing an electrical device, the two financial costs you need to consider are the initial price of the device and the operating costs to make use of the device.

The financial cost is the cost of finance charged per item purchased, it may also include miscellaneous charges associated with the usage of the item.

Here, before you purchase the electrical device, think carefully if:

Learn more about financial costs here:

https://brainly.com/question/7269549?referrer=searchResults

The following answered has been deleted due to multiple violations to our Terms of Service.

Hey there!

Molar mass SO₂ = 64.066 g/mol

Therefore:

1 mole SO₂ -------------------- 64.066 g

(moles SO₂ ) ??---------------- 5.0 g

( moles SO₂) = 5.0 * 1 / 64.066

(moles SO₂) = 5.0 / 64.066

moles = 0.0780 moles of SO₂

Hope this helps!

Answer:

1. 111.54 kJ

2. 944.68 kJ

3. 339 kJ

4. 94.92 kJ

5. 21.0578 kJ

Explanation:

1. The heat required to melt a given quantity of ice is known as the latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice

[tex]L^{\circ}_F[/tex], of ice = 330 J/g

The heat required to melt a given mass of ice = Mass of ice, m × latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice

The heat required to melt 338 grams of ice = 338 g × 330 J/g = 111,540 J = 111.54 kJ

2. The latent heat of vaporization, l, of water = 2260 J/g

The heat required to convert, m grams of water to steam at

The heat required to convert 418 grams of boiling water into steam = 418 g × 2260 J/g = 944680 J = 944.68 kJ

3. To convert 150 grams of boiling water to steam, we have;

Heat required = 150 g × 2260 J/g = 339,000 J = 339 kJ

4. To convert 42.0 grams of boiling water to steam, we have;

Heat required = 42.0 g × 2260 J/g = 94,920 J = 94.92 kJ

5. The specific heat capacity of steam is 1.996 J/(g·°C)

The heat, Q, required to raise a given mass, m, of steam by Δt °C is given as follows;

Q = m × c × Δt

The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C is therefore;

Q = 422 g × 1.996 J/(g·°C) × (135.0 °C - 110.0 °C) = 21057.8 J

The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C = 21057.8 J = 21.0578 kJ

Answer:

The polyatomic cation that will react with MnO₄⁻ to form a neutral compound is NH₄⁺ (ammonium ion) to form NH₄MnO₄ (Ammonium permanganate).

Answer:

Rock

Explanation:

Answer:

A.

Explanation:

The car has kinetic energy.

Answer:

Unlike lactic acid fermentation where-in the end product is lactic acid, the 'waste' material in an alcohol respiration is ethanol (an alcohol) and CO2 (carbon dioxide). Human beings have already perfected the use of this process for commercial purposes like in the production of beer, wine and bread

Explanation:

In alcoholic fermentation, pyruvate changes to alcohol and carbon dioxide. This type of fermentation is carried out by yeasts and some bacteria.

Answer:

2. reasoning

Explanation:

PLS GIVE BRAINLIEST

Answer:

Yes. The scientific sources disputed several of the fitness instructor’s points. For example, he mentioned that GMO foods cause food allergies, but two credible sources disputed this claim. The lab technician, however, supported her findings with verifiable scientific information.

Explanation: plato

The pressure : 1.536 atm

Same container=same volume⇒the volume is constant

Gay Lussac's Law  

When the volume is not changed, the gas pressure in the tube is proportional to its absolute temperature  

[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

P₁=1 atm

T₁=20+273=293 K

T₂=450 K

the pressure :

[tex]\tt P_2=\dfrac{P_1.T_2}{T_1}\\\\P_2=\dfrac{1\times 450}{293}=\boxed{\bold{1.536~atm}}[/tex]

Answer:

This question is incomplete

Explanation:

This question is incomplete because of the absence of options. However, Rutherford's model of an atom highlighted the following (which you can use to determine your answer from the missing options)

1) electrons move in fixed circular part (now referred to as electron shells) around a central positively charged nucleus

2) The size of the nucleus is very small relative to the size of the atom