Please help I need to turn this in already

Answer:

QC= [O2]^3/[F2]^10

Explanation:

Answer:

See explanation

Explanation:

The compound ClO2 has 19 valence electrons.  ClO2 is a bent molecule with tetrahedral electron pair geometry but has two  lone pairs of electrons. This is indicated by the presence of four electron pairs on the outermost shell of the central atom.

The molecule has an odd number of valence electrons, hence, it is generally regarded as a paramagnetic radical. None of the proposed Lewis structures for the molecule is satisfactory because none of them obeys the octet rule.

From the images attached, one can easily see that the electron dots around the oxygen and chlorine atoms does not satisfy the octet rule in all the resonance structures shown.

Answer:

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Explanation:

Answer:

D

Explanation:

Identifying unique features of evidence

A laboratory is a place where scientific investigations and experiments are conducted. Observing a phenomenon in the lab includes identifying unique features of evidence. Thus, option D is correct.

An observation is said to be the deduction that is seen or heard and is due to the actions of the process or event that are gained from the information from a conducted experiment.

It is an important factor in an experiment and research and is used in the lab to falsify or prove the hypothesis. It is made based on the experimental setup and involves various steps.

The observations are used to draw conclusions and inferences based on the detailed identification of the characteristics of the evidence. The evidence supports the observation.

Therefore, option D. the features of evidence are the correct option.

Learn more about observations here:

https://brainly.com/question/28041973

#SPJ2

Answer:

Explanation:

We shall use the formula S₁V₁ = S₂V₂

S₁ = .1180 M , V₁ = 25.98 mL

S₂ = ? , V₂ = 52.50 mL

.1180 M  x 25.98 = 52.50 x S₂

S₂ = .0584 M

Molarity of the acid solution = .0584 M .

The concentration of the acid solution is 0.058 M.

The equation of the reaction is;

CH3COOH(aq) + KOH(aq) ----->  CH3COOK(aq) + H2O(l)

The following are known;

Concentration of base CB = 0.1180 M

Volume of base VB =  25.98 mL

Concentration of acid CA = ?

Volume of acid VA = 52.50 mL

Number of moles of acid NA = 1

Number of moles of base NB = 1

Using;

CAVA/CBVB =NA/NB

CAVANB = CBVBNA

CA=  CBVBNA/VANB

CA = 0.1180 M × 25.98 mL × 1/52.50 mL × 1

CA = 0.058 M

Learn more: https://brainly.com/question/24381583

Answer: Proton - positive charge (+)

Neutron - neutral charge (0)

Electron - negative charge (-)

Explanation:

Answer:

D represents the element nitrogen which will gain three valence electrons forming a 3 ion.

Answer:

answer is

Explanation:

D

Answer:

Pour the mixture through a filter to separate the sand, then evaporate the liquid to separate the salt.

Explanation:

There are various methods used to separate single substances from a mixture. The method adopted depends upon the type of mixture and the ingredients used in it. According to the given question, the mixture comprises of sand, salt and water. Here, the first process will be the process of filtration. Through filtration, the salt-water solution and sand can be separated. Salt-water solution can be separated by the process of evaporation in which sat and water will be separated individually.

Answer:

red bricks

Explanation:

right on edg 2020

Red bricks should you use so that the area is cool in terms of temperture. Therefore, option B is correct.

Red bricks can be used in the construction of structures such as buildings, foundations, arches, pavement, and bridges. These can also be used for aesthetic purposes such as landscaping, face work, and a variety of other architectural purposes.

Traditional red bricks are saw to be more robust, and structures constructed with them are stronger than hollow block structures.Red brick can be warm, with rust or terracotta undertones. They could also be cool and more burgundy.

Thus, Red bricks should you use so that the area is cool in terms of temperture, option B is correct.

To learn more about the red bricks, follow the link;

https://brainly.com/question/14893671

#SPJ6

Answer:

What subject is this for?

Explanation:

Answer:

acidic because of electrical issues and the body of electrical equipment

Answer:

D

Explanation:

It is a solid everything that is a solid is heavier

Answer:

True

Explanation:

According to some calculations, the Earth is losing 50,000 metric tons of mass every single year, even though an extra 40,000 metric tons of space dust converge onto the Earth's gravity well, it's still losing weight.

Answer:

true

Explanation:

Answer:

Metals and Non-metals

Explanation:

Answer:

a) - 0.2 M

b) - 0.2 M

c)- 0

Explanation:

The chemical formula of copper (II) bromide is CuBr₂. Its molar mass (MM) is calculated as follows:

MM(CuBr₂)= MM(Cu) + (2 x MM(Br) = 63.5 g/mol + (2 x 80 g/mol)= 223.5 g/mol

a). Molarity = moles CuBr₂/1 L solution

moles CuBr₂ = mass/MM = 18.7 g x 1 mol/223.5 g = 0.084 mol

Volume in L = 375 mL x 1 L/1000 mL = 0.375 L

M = 0.084 mol/(0.375 L) = 0.223 M ≅ 0.2 M

b). When is added to water, CuBr₂ dissociates into ions as follows:

CuBr₂ ⇒ Cu²⁺ + 2 Br⁻

We have 1 mol Cu²⁺ (copper (II) cation) per mol of CuBr₂. Thus, the concentration of copper (II) cation is:

0.2 mol CuBr₂ x 1 mol Cu²⁺/mol CuBr₂ = 0.2 M

c). The concentration of acetate anion is 0. There is no acetate anion in the solution (the anion from CuBr₂ is bromide Br⁻).

Answer:

B

Explanation:

It's the only thing that actually changes into something different and when u burn it it makes chemicals

Answer:D. Both of their ions will have the same negative charge

Explanation:

Answer:

Nervous and Excretory

Explanation:

The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.

Nervous and Excretory systems are working together in this scenario.

The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.

Learn more:

brainly.com/question/17342396

Answer:

gill lamellae

Explanation:

Gills  in fishes are structures that permit fish to carry out gaseous exchange in water.  Fishes exchange gases  such as oxygen and carbon dioxide using gills.

Fish gills carry out their activity mainly through its major component called the  gill lamellae. These are comb-like filaments which help increase the surface area of the gills in order to facilitate gaseous exchange

Answer:

The effect is the increasing of the molar concentration.

Explanation:

When you standarize a solution of NaOH with KHP you are establish its molar concentration (That is the amount of moles of NaOH per liter of solution).

If you evaporated some water of the solution, you are increasing its concentration because volume is decreasing doing the amount of moles per liter increasing.

Answer:

Ions of opposite charge strongly attract each other; those of like charges repel. As a result ions in an ionic compound are arranged in a particular manner.

Explanation:

Google is smart

Answer:

pH = 11

Explanation:

The equilibrium of a weak base as NaCN in water is:

NaCN(aq) + H₂O(l) ⇄ OH⁻(aq) + Na⁺(aq) + HCN(aq)

And kb, the equilibrium constant, is:

Kb = [OH⁻] [HCN] / [NaCN]

Where Kb of NaCN is 2.04x10⁻⁵

In the beginning, the [NaCN] is 0.050mol / L = 0.050M.

Both [OH⁻] and [HCN] are produced from this equilibrium, and its concentration is X, that is:

2.04x10⁻⁵ = [X] [X] / [0.050M]

1.02x10⁻⁶ = X²

X = 1x10⁻³ = [OH⁻]

As pOH = - log [OH⁻]

pOH = 3.00

And pH = 14 - pOH

Answer:

i

[tex]J_{m} = 20 [/tex]

ii

[tex]J_{m} = 22.5 [/tex]

Explanation:

From the question we are told that

  The first temperatures is [tex]T_1 =  25^oC =  25 +273 =298 \ K[/tex]

   The second temperature is  [tex]T_2 =  100^oC =  100 +273 = 373 \ K[/tex]

Generally the equation for  the most highly populated rotational energy level is mathematically represented as

     [tex]J_{m} = [ \frac{RT}{2B}]  ^{\frac{1}{2} } - \frac{1}{2}[/tex]

Here R is the gas constant with value [tex]R =8.314 \ J\cdot K^{-1} \cdot mol^{-1}[/tex]

Also  

      B is given as [tex]B=\ 0.244 \ cm^{-1}[/tex]

   Generally the energy require per mole to move 1 cm is  12 J /mole

So   [tex]0.244 \ cm^{-1}[/tex]  will require x J/mole

           [tex]x =  0.244 *  12[/tex]

=>          [tex]x =  2.928 \ J/mol [/tex]

So at the first temperature

     [tex]J_{m} = [ \frac{8.314 * 298  }{2*  2.928 }]  ^{\frac{1}{2} } - 0.5 [/tex]

=>  [tex]J_{m} = 20 [/tex]

So at the second temperature

           [tex]J_{m} = [ \frac{8.314 * 373  }{2*  2.928 }]  ^{\frac{1}{2} } - 0.5 [/tex]

=>  [tex]J_{m} = 22.5 [/tex]

Answer:

Final volume  = 0.44 L

Explanation:

Given data:

Initial volume of balloon = 1.1 L

Initial pressure = 0.80 atm

Final volume = ?

Final pressure = 2.0 atm

Solution:

The given problem will be solved through the Boly's law,

"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"

Mathematical expression:

P₁V₁ = P₂V₂

P₁ = Initial pressure

V₁ = initial volume

P₂ = final pressure

V₂ = final volume  

Now we will put the values in formula,

P₁V₁ = P₂V₂

0.80 atm × 1.1 L = 2.0 atm × V₂

V₂ = 0.88 atm. L/ 2.0 atm

V₂ = 0.44 L

Answer:

The answer will be 29.4˚C.

Explanation:

Using the formula 5(˚F-32)/9, plug in the numbers and you'll get 29.4˚C.

Answer:

7.71 × 10⁻⁴ M/s

Explanation:

The initial rate of the reaction can be expressed by using the formula:

[tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]

where the number of moles of O₂ = [tex]\dfrac{PV}{RT}[/tex]

where;

Pressue P = 1.00 atm

Volume V =5.74mL =  (5.74 /1000) L

Rate R = 0.082 L atm/mol.K

Temperature = 298 K

[tex]= \dfrac{1.00 \ atm \times \dfrac{5.74 }{1000}L}{0.082 \ L \ atm/mol.K \times 298 K}[/tex]

= 2.35 × 10⁻⁴ mol

Δ[O₂] = [tex]\dfrac{moles \ produced - initial \ mole}{\dfrac{5.08 }{1000}L }[/tex]

Δ[O₂] = [tex]\dfrac{2.35 \times 10^{-4} M - 0 M}{\dfrac{5.08 }{1000}}[/tex]

Δ[O₂]  = 0.04626 M

The initial rate = [tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]

= [tex]\dfrac{0.04626}{60}[/tex]

= 7.71 × 10⁻⁴ M/s

Answer:

height = 4.74 cm

density = 2.23 g/ cm³

Explanation:

Mass of metal = 0.650 kg (650 g)

Width = 0.136 m    

Length = 0.0451 m  

Volume of metal = 291 cm³

Height in cm = ?

density of metal =?

Solution:

Width = 0.136 m    (0.136 m×100 cm/1m = 13.6 cm)

Length = 0.0451 m  (0.0451 m×100 cm/1m = 4.51 cm)

First of all we will calculate the height:

Volume = height× width× length

291 cm³ =      h     × 13.6 cm × 4.51 cm

291 cm³ =      h     × 61.34 cm²

h = 291 cm³ / 61.34 cm²

h = 4.74 cm

Density:

d = m/v

d = 650 g/291 cm³

d = 2.23 g/ cm³