PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:

Answer:

$13.31

Explanation:

We know that the bill comes to $93.17 and that 7 people will split the bill equally

We can just use the equation

bill = $93.17/7

bill = $13.31

We have that for the Question "a)what is the resistivity in (ohm-cm) of the material? b) what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material"

Answer:

From the question we are told

This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.

A) Resistivity is given as,

[tex]p = \frac{RA}{l}[/tex]

where,

[tex]R = \frac{V}{I}[/tex]

Therefore,

[tex]p = \frac{VA}{Il}\\\\p = \frac{1*(0.1*0.5)}{0.019*1.5}\\\\p = 1.754 ohm-cm[/tex]

B) Conductivity is given as,

[tex]U = \frac{\rho}{pe}\\\\U = \frac{10^{17}}{10^{10}*1.6*10^{-19}}\\\\U = 6.25*10^{25} cm^3/V-s[/tex]

For more information on this visit

https://brainly.com/question/23379286

Answer:

Heat Loss = 5 kg * 700 deg K * 220 J / (kg*deg K) = 7.70E5 J

Since there are 4.186 J/cal

Heat Loss = 7.70E5J / 4.186 J/cal = 1.84E5 cal

Heat Gain = 2000 g * 85 deg K / cal / (deg K g) + M * 540 cal/g

Heat Gain = 1.70E5 cal + M * 540 cal/g

M = (1.84 - 1.70) E5 g / 540

25.9 g

25.9 g or 25.9 cm^3 or .0259 L   of water will boil away

Answer:

In space we feel weightlessness because the earth's gravity has less effect on us. The Earth's gravitational attraction at those altitudes is only about 11% less than it is at the Earth's surface. If you had a ladder that could reach as high as the shuttle's orbit, your weight would be 11% less at the top.

Explanation:

Hope this helps:)

Answer:

v down exponenet 1 brainlest

Explanation:

Answer:

v0 [vee nought] is the initial velocity when time=0

In 60 minutes or 3600 seconds, the tip of the minute hand traverses the circumference of a circle with radius 3.00 cm, so it moves with a tangential speed of

(3.00 cm)/(3600 s) ≈ 0.00083 cm/s = 8.3 μm/s

Answer:

d. The truck that left later was travelling faster

Explanation:

Both trucks travelled from the same place to the same place, meaning they both travelled the same distance;

They both arrive at the same time, but the second truck left later so it took less time to travel the distance than the first truck;

The only variable that can account for this difference is speed;

The one that left later, therefore, must have been going faster.

Answer:

I think the answer is (A)...

Hope this helps!

The sun emits electromagnetic waves with a power of  

4.0 ∗ 10  (26)  W.

Hi there!

We can use the equation:

d = v₀t + 1/2at²

Where:

v₀ = initial velocity downward

a = acceleration due to gravity

t = time

Plug in given values:

d = 4(12) + 1/2(9.8)(12²)

d = 48 + 705.6 = 753.6 m

Answer:Climate change, emerging diseases, and increased exposure to ultraviolet radiation (due to ozone depletion) are all additional factors that could be contributing to falling amphibian populations. ... Instead, amphibians are disappearing thanks to a complex mixture of factors, including: Alien Specie

Explanation:

just look it up........

Answer:

lol

Explanation:

Hi there!

We can use the following equation to find the frequency of each harmonic:

[tex]f_n = \frac{n}{2L} \sqrt{\frac{T}{\lambda}}[/tex]

n = nth harmonic

L = length of string (m)

T = Tension of string (N)

λ = linear density (kg/m)

Begin by converting the linear mass density to kg:

2.00g /m · 1 kg / 1000g = 0.002 kg/m

Now, we can use the equation to find the first three harmonics.

First harmonic:

[tex]f_1 = \frac{1}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{131.76 Hz}[/tex]

Second harmonic:

[tex]f_2 = \frac{2}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{263.52Hz}[/tex]

Third harmonic:

[tex]f_3 = \frac{3}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{395.28Hz}[/tex]

Answer:

They take the form of heat, I think thats it but I cant see if you put down any answers

Explanation:

Answer:a

Explanation:

they form hear

Answer:

A straight wire in a magnetic field experiences a force of 0.022 N when the current in the wire is 1.1 A. The current in the wire is changed ...

1 answer

·

Top answer:

The magnetic force that acts on the wire in the first case can be written as

Explanation:

Answer:

90m/h N

Explanation:

we consider janes velocity to the positive X axis so Vj=280km/s

and the final position a dot in on the graph r=294km, we find the x and y components:

294*cos(17.8)=280 X+ confirming our theory

294*sin(17.8)=90 Y+ or N and that's the winds' velocity.

Answer:

Explanation:

20 n is an unknown amount

If that is supposed to be 20 N(ewtons)

then W = Fd = 20(15) = 300 J

Answer: it will be 300 newton meters

Explanation:

The pressure dropped by 24 MB in the storm's center from November 9, 1200z, until November 11, 0000z.

Using the attached map below, in the morning of November 9, the pressure situated at the storm's center = 1000 MB isobar located at the center.

Meanwhile, on November 11, 0000z the pressure situated at the storm's center = 976 MB isobar  

The difference in this pressure is regarded as the pressure drop in the storm's center and it is determined as follows;

= 1000 MB - 976 MB

= 24 MB

Therefore, we can conclude that the pressure drop by 24 MB in the storm's center from November 9, 1200z, until November 11, 0000z.

Learn more about pressure drop in an isobaric process here:

https://brainly.com/question/13089696?referrer=searchResults

Answer:

A) 58 km

B) 30 mins

Explanation:

In pic details

graph in pic

From the diagram, the angular speed will increase clockwise, the sign of the angular acceleration will be negative and the direction of rotation will be clockwise direction and the sign of the angular acceleration is negative. The correct answer is option B

Given that two objects of masses m1 and m2 are attached to a seesaw. The seesaw is made of a bar that has length l and is pivoted so that it is free to rotate in the vertical plane without friction. Counterclockwise is considered the positive rotational direction.

If m1 is 24 kilograms, m2 is 12 kilograms, and mbar is 10 kilograms, The moment of object m1 will be equal to the moment of object m2 without the Mbar

Let assume that the length L of the seesaw is 9 cm.

Anticlockwise moment = 24 x 9/3 = 72Nm

Clockwise moment = 12 x 2(9/3) = 72 Nm

With the consideration of mass of the bar Mbar, this will add to clockwise moment of the seesaw.

Therefore, the direction of rotation will be clockwise direction.

Angular acceleration is positive when object is speeding up and negative when slowing down. Also, angular acceleration is positive when speed increases in an anticlockwise direction and negative when speed increases in the clockwise direction.

From the diagram, since the angular speed increase clockwise, the sign of the angular acceleration will be negative.

We can conclude that the direction of rotation will be clockwise direction and the sign of the angular acceleration is negative.

The correct answer is option B

Learn more here: https://brainly.com/question/20366032

Answer:

F = - K x for spring     (note that that F here is given in grams, F = m g is correct)

K here is 100 g / cm      for the spring constant

x = -420 g / 100 g/cm = -4.2 cm

The spring would compress 4.2 cm for a total length of 20 - 4.2 = 15.8

d)  to compress the spring 6.8 cm one can see that the load would be 680 g

20 seconds

Explanation:

Let [tex]x_a[/tex] be the distance traveled by the accelerating car and [tex]x_c[/tex] be the distance traveled by the car moving with a constant velocity. When they cover the same distance, we can write

[tex]x_a = x_c \Rightarrow v_{0a}t + \frac{1}{2}at^2 = v_ct[/tex]

where [tex]v_c[/tex] is the velocity of car moving at a constant rate and a is the acceleration of the accelerating car. Since the accelerating car started from rest, then [tex]v_{0a}[/tex] is zero so our equation above simplifies to

[tex]\frac{1}{2}at^2 = v_ct[/tex]

Note that the variable t cancels out so solving for t, we get

[tex]\frac{1}{2}at = v_c \Rightarrow t = \dfrac{2v_c}{a}[/tex]

Plugging in the given values,

[tex]t = \dfrac{2(20\:\text{m/s})}{2\:\text{m/s}^2} = 20\:\text{s}[/tex]

Answer:

Cement, iron, and steel all work great!

Answer:

Explanation:

The answer:

https://www.chegg.com/homework-help/questions-and-answers/race-car-starting-rest-travels-around-circular-turn-radius-247-m-certain-instant-car-still-q402991

Total acceleration of car is 148.31 m/s².

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Given parameters:

Radius of the circular path: r = 22.5 m.

Angular speed: ω = 0.541 rad/s.

So, centripetal acceleration; α = ω²r = (0.541)² × 22.5 m/s² = 6.58 m/s².

Tangential acceleration: [tex]\alpha_t[/tex] = αr = 6.58 × 22.5 = 148.16 m/s².

Hence, total acceleration = √(α² + [tex]\alpha_t[/tex]²) = √(6.58² +148.16²) = 148.31 m/s².

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ2

Answer:

C

Explanation:

Pls brainliest

Answer:

Explanation:

Let d be the distance to the center of mass from the front wheels

Sum moments about the front wheel contact point to zero

1240(9.8)[d] - 1240(9.8)(1 - 0.67)[3.2] = 0

1240(9.8)[d] = 1240(9.8)(1 - 0.67)[3.2]

                d = (1 - 0.67)[3.2]

                d = 1.056 m

Answer:

im pretty sure the answer is C

Answer:

An effect begins to alter movement, and the direction of moves in the circular path is known as centripetal force. Its measurable unit is Newton or Kilogram meter per square of the second. The product of mass and square of velocity divided by the radius of path travel by the body provide s the term centripetal force.

Explanation:

Answer:

An effect begins to alter movement, and the direction of moves in the circular path is known as centripetal force. Its measurable unit is Newton or Kilogram meter per square of the second. The product of mass and square of velocity divided by the radius of path travel by the body provide s the term centripetal force.

Explanation: