Answers
2.15 mL of water will spill from the beaker when a 400mL glass beaker at room temperature is filled to the brim with cold water.
What is temperature and how come 2 mL of water spills off the beaker?Temperature as studied always is the measure for the degree of hotness or coldness.Here in the question is given a glass beaker of 400 mL which is at room temperature .Now the beaker is warmed up to 30 degree celsius, and then some of amount of water spilled.Change in volume = beta x v1 x change in temperature = 210 x 10^-4 x 400 x ( 30 - 4.4) = 2.15 mL.Hence the amount of water that will spill from the beaker would be 2.15 mL.To know more about temperature visit:
https://brainly.com/question/11464844
#SPJ13
Related Questions
A roller coaster car begins its roll from the top of the tracks at a speed of2 meters per second. When it reaches the bottom of the 200-meter drop four seconds later, its speed is 22 meters per second. What was the averagespeed of the roller coaster ride in meters per second over the 200-meter drop
Answers
The speed of the car from the top of the track is,
[tex]u=2ms^{-1}[/tex]The distance traveled by the car is,
[tex]d=200\text{ m}[/tex]The speed of the car after 4 seconds is,
[tex]v=22ms^{-1}[/tex]Thus, the average speed of the car is,
[tex]v_{av}=\frac{u+v}{2}[/tex][tex]\begin{gathered} v_{av}=\frac{2+22}{2} \\ v_{av}=12ms^{-1} \end{gathered}[/tex]Thus, the average speed of the roller coaster car is 12 meter per second.
You accidentally throw your car keys horizontally at 5.0 m/s from a cliff 45 m high. How far from the base of the cliff should you look for your keys?
Answers
The distance from the base of the cliff you should look for your key is 15 m
How to determine the distance from the cliffTo answer the question given above, we shall determine the time taken for the keyl to land. This can be obtained as follow:
Height (h) = 45 mAcceleration due to gravity (g) = 9.8 m/s²Time (t) = ?h = ½gt²
45 = ½ × 9.8 × t²
45 = 4.9 × t²
Divide both side by 4.9
t² = 45 / 4.9
Take the square root of both side
t = √(45 / 4.9)
t = 3 s
Finally, we shall determin the distance from the base of the cliff the key will land. This can be obatined as follow:
Horizontal velocity (u) = 5 m/sTime (t) = 3 sDistance (s) = ?s = ut
s = 5 × 3
s = 15 m
Thus, you should look for your key at a distance of 15 from the base of cliff
Learn more about motion under gravity:
https://brainly.com/question/22719691
#SPJ1
a 2403 kg racecar has a total momentum of 9.912*10^4kgm/s at one point in the race. calculate the speed of the racecar at that point
Answers
In order to calculate the speed, we can use the formula for the momentum:
[tex]p=m\cdot v[/tex]Where p is the momentum (in kg m/s), m is the mass (in kg) and v is the speed (in m/s).
So, using p = 99120 kg m/s and m = 2403 kg, we have:
[tex]\begin{gathered} 99120=2403\cdot v\\ \\ v=\frac{99120}{2403}\\ \\ v=41.25\text{ m/s} \end{gathered}[/tex]A.Calculate the combined force of vector F ?B.Calculate the direction of the combined force vector F ?
Answers
Answer:
A. 282.93 N
B. 1.94 degrees
Explanation:
The combined force is found by first adding the three forces given.
We add the three forces by adding their x and y components separately and then combining the results to produce the total force,
The x component of a force is
[tex]\begin{gathered} \cos \theta=\frac{f_x}{F} \\ \Rightarrow f_x=F\cos \theta \end{gathered}[/tex]Therefore, x components of the forces is
[tex]F_x=120\cos 65+100\cos 25+200\cos (-45)[/tex]The y-component of the forces is
[tex]F_y=120\sin 120+100\sin 25+200\sin (-45)[/tex]Now evaluating the above two components gives
[tex]F_x=282.77N[/tex][tex]F_y=9.597N[/tex]Let us draw on big vector whose components are the above vectors.
The angle of the combined vector with respect to the x-axis is
[tex]\tan \theta=\frac{9.59}{282.77}[/tex][tex]\theta=\tan ^{-1}(\frac{9.59}{282.77})[/tex][tex]\boxed{\theta=1.94^o}[/tex]which is our answer!
The magnitude of the combined vector is
[tex]F=\sqrt[]{F^2_x+F^2_y_{}}[/tex][tex]F=\sqrt[]{(9.59)^2_{}+(282.77)^2_{}}[/tex][tex]\boxed{F=282.93N}[/tex]which is our answer!
Hence, to summerise:
A. 282.93 N
B. 1.94 degrees
A train is traveling down a straight track at 26 m/s when the engineer applies the brakes, resulting in an acceleration of −1.0 m/s2 as long as the train is in motion. How far does the train move during a 52-s time interval starting at the instant the brakes are applied?______ m
Answers
In order to calculate the distance the train will move, we can use the formula below:
[tex]\Delta S=V_0t+\frac{at^2}{2}[/tex]Where V0 is the initial speed, t is the time and a is the acceleration.
Since the initial speed is 26 m/s and the train acceleration is -1 m/s², the train will completely stop after 26 seconds. In the remaining 26 seconds to complete the total of 52, the train will be stopped already, so there is no displacement.
Because of that, we will use a time t = 26 seconds.
So, using V0 = 26 m/s and a = -1 m/s², we have:
[tex]\begin{gathered} \Delta S=26\cdot26+\frac{(-1)26^2}{2}\\ \\ \Delta S=676-338\\ \\ \Delta S=338\text{ m} \end{gathered}[/tex]Therefore the train will move 338 meters.
A ski jumper competing for an Olympic gold metal wants to jump
a horizontal distance of 149 meters. The takeoff point of the ski
jump is at a height of 38.0 meters. With what horizontal velocity
must he leave the jump in order to travel 149 meters?
Answers
19.25 m/s is horizontal velocity must he leave the jump in order to travel 149 meters .
How fast is horizontal moving?Standard definitions of horizontal velocity include miles per hour and meters per second, which are horizontal displacement times time. The distance an object has traveled since its origin is simply referred to as displacement.
How can one calculate vertical velocity using horizontal velocity?V * cos() equals the horizontal velocity component Vx. V * sin() is equal to the vertical component of velocity, Vy.
Time before landing = sqrt ( 2 x height / gravity ), sqrt ( 2 x 38/ 9.81) = 7.75
distance / time = avg speed
149/ 7.75 ≅ 19.25 m/s
To know more about horizontal velocity visit:-
https://brainly.com/question/14059839
#SPJ13
When you step off a bus moving at 2 m/s, your horizontal speed when you meet the ground isA) zero.B) less than 2 m/s but greater than zero.C) about 2 m/s.D) greater than 2 m/s.
Answers
ANSWER:
C) about 2 m/s.
STEP-BY-STEP EXPLANATION:
While step off the bus, it acquires a vertical component of velocity, but it still has the initial horizontal component of velocity due to the movement of the bus.
Which means that the velocity is either 2 m/s or about 2 m/s
Convert 500BTU/ft.s.F to g.cal/cm^2.s.°C
Answers
The requirement of the prompt is for 500 British Thermal Units /Calories (Cal) to be converted to Gram Calories. Hence, 500 BTU (cal) = 126,082cm²
What is a British Thermal Unit?A British thermal unit is a heat unit defined as the amount of heat needed to raise the temperature of one pound of water by one degree Fahrenheit. It is also one of the customary units used in the United States.
To covert 500 BTU, one must note that according to established scientific metrics.:
1 BTU = 252.164 Gram (Cal).
Hence,
500 BTU = 252.164 x 500
= 126,082 cm²
Learn more about BTU:
https://brainly.com/question/14252954
#SPJ1
You place a box weighing 276 N on an inclined plane that makes a 44.5° angle with the horizontal.
Compute the component of the gravitational force acting down the inclined plane.
Answer in units of N.
Answers
Answer:
this is the answer
Explanation:
hope it helps
A person pushes a 500 kg crate with a force of 1200 N and the crate accelerates at .5 m/s^2. What is the force of friction acting on the crate?
Answers
The force of friction acting on the crate is 950 N.
What is force of friction?Force of friction is defined as the force that opposes the motion of an object when two surfaces are in contact.
The frictional force on the object is determined by applying Newton's second law of motion as shown below.
F - Ff = ma
where;
F is the applied force = 1200 NFf is the frictional forcem is the mass of the crate = 500 kga is the acceleration of the crate = 0.5 m/s²1200 - Ff = 500(0.5)
1200 - Ff = 250
Ff = 1200 - 250
Ff = 950 N
Thus, the force of friction acting on the crate preventing the motion of the crate is determined by applying Newton's second law of motion.
Learn more about force of friction here: https://brainly.com/question/4618599
#SPJ1
Two drops of mercury each has a charge on 2.42 nC and a voltage of 293.97 V. If the two drops are merged into one drop, what is the voltage on this drop?
Answers
The electric potential is given by:
[tex]\begin{gathered} V=\frac{Kq}{r} \\ \end{gathered}[/tex]Let's find r first:
[tex]\begin{gathered} r=\frac{Kq}{V}=\frac{8.988\times10^9\cdot2.42\times10^{-9}}{293.97} \\ r\approx0.074m \end{gathered}[/tex]Now we can find the radius of the new drop:
[tex]r_t=2(r)=2(0.074)=0.148[/tex]So:
[tex]\begin{gathered} V=\frac{K(2q)}{r_t}=\frac{8.988\times10^9\cdot2(2.42\times10^{-9})}{(0.148)} \\ V=293.93V \end{gathered}[/tex]Suppose a 345-g kookaburra (a large kingfisher bird) picks up a 75-g snake and raises it 2.1 m from the ground to a branch.How much work, in joules, did the bird do on the snake? How much work, in joules, did it do to raise its own center of mass to the branch?
Answers
The work done in each case can be calculated with the change in potential energy of the body:
[tex]Work=m\cdot g\cdot h[/tex]The work done by the bird on the snake will use only the mass of the snake (in kg):
[tex]\begin{gathered} Work=0.075\cdot9.8\cdot2.1\\ \\ Work=1.5435\text{ J} \end{gathered}[/tex]The work done by the bird to raise its own center of mass will use only the bird mass (in kg):
[tex]\begin{gathered} Work=0.345\cdot9.8\cdot2.1\\ \\ Work=7.1\text{ J} \end{gathered}[/tex]A student makes the following claim, "Acceleration is when an object changes speed, so it can be discussed as a scalar quantity." Explain the error in the student's claim. Provide an example of each quantity to support your answer.
Answers
A student makes the following claim, "Acceleration is when an object changes speed, so it can be discussed as a scalar quantity." The error here is that acceleration is said to be done when either speed of that object changes or direction of that object changes. Hence , acceleration is not a scaler quantity.
Scalar quantities are quantities that are described only by a magnitude. They do not have a direction of action.
A vector quantity is defined as the physical quantity that has both directions as well as magnitude.
Acceleration is said to be occurred in two cases :
when the object changes its speed
or when the object changes its direction
since , acceleration depends upon both direction and magnitude ,hence it is a vector quantity not a scaler quantity.
for example : a stone attached to a string moving in a circular motion at a constant speed will be considered in accelerated motion because it is constantly changing its direction.
To learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ1
nd in Atlanta you decide to drive around the city. You turn a corner and are driving up a steep hill. Suddenly, a small boy runs out on the street chasing a ball. You slam on the brakes and skid to a stop leaving a 50-foot-long skid mark on the street. The boy calmly walks away but a policemen watching from the sidewalk walks over and gives you a speeding ticket. He points out that the speed limit on this street is 25mph. After you recover your wits, you begin to examine the situation. You determine that the street makes an angle of 25◦with the horizontal and that the coefficient of static friction between your tires and the street is0.80. You also find that the coefficient of kinetic friction between your tires and the street is 0.60. Your car’s information book tells you that the mass of your car is 1600 kg. You weigh 140 lbs. Will you fight the ticket
Answers
skid = 50 ft
Speed limit = 25 mph
angle = 25°
friction coefficient = 0.80
mass = 1600 kg
weight = 140 lbs
Ultraviolet light has shorter wavelengths and higherfrequencies than visible light.TRUEFALSE
Answers
Ultraviolet light has shorter wavelengths and higher frequencies than visible light.
The answer is TRUE
A car going at 80 mph comes to a complete stop in 6 seconds. Calculate the acceleration
Answers
The acceleration is defined as:
[tex]a=\frac{v_f-v_0}{t}[/tex]where vf is the final velocity, v0 is the initial velocity and t is the time. In this case we have:
The initial velocity is 80 mph
The final velocity is 0 mph (since the car stops)
The time it takes to slow down is 6 seconds.
Before we can do the calculation, we need to convert the velocity to appropriate units; let's write the initial velocity in ft/s units. To do this we need to remember that 1 mile is equal to 5280 ft and one hour is equal to 3600 s, then we have:
[tex]80\frac{mi}{h}\cdot\frac{5280\text{ ft}}{1\text{ mi}}\cdot\frac{1\text{ h}}{3600\text{ s}}=117.33\frac{ft}{s}[/tex]Hence the initial velocity is 177.33 ft/s.
Now that we have all the values we need, we plug them in the equation for the acceleration:
[tex]\begin{gathered} a=\frac{0-117.33}{6} \\ a=-19.56 \end{gathered}[/tex]Therefore, the acceleration is -19.56 feet per second per second. Note: The minus sign indicates that the car is slowing down.
Can all rocks be dated with radiometer methods? Explain
Answers
Answer: No.
Explanation:
Radiometer dating is used on igneous rocks.
Unlike the other two rock types, sedimentary annd metamorphisis, all igneous rocks possess one specific age/ time of origin.
Toaster uses a nichrome heating coil and operates at 120 V. When the toaster is turned on at 20°C, the current in the cold coil is 1.5 A. When the coil warms up, the current has a value of 1.3 A. If the thermal coefficient of resistivity for nichrome is 4.5x10-4 1/Co, what is the temperature of the coil?Group of answer choices68oC490oC160oC360oC260oC
Answers
Given that the operating voltage is V = 120 V.
The initial temperature of the toaster is T1 = 20 degrees Celsius
The initial current in the coil is I1 = 1.5 A
The final current in the coil is I2 = 1.3 A
The thermal coefficient of resistivity for nichrome is
[tex]\alpha=4.5\times10^{-4}^{}\text{ }^{\circ}C^{-1}[/tex]We have to find the final temperature of the coil, T2.
The initial resistance of the coil is
[tex]\begin{gathered} R1=\frac{V}{I1} \\ =\frac{120}{1.5} \\ =80\Omega \end{gathered}[/tex]The final resistance of the coil is
[tex]\begin{gathered} R2\text{ =}\frac{V}{I2} \\ =\frac{120}{1.3} \\ =92.307\Omega \end{gathered}[/tex]The formula to calculate the final temperature of the coil is
[tex]\begin{gathered} \alpha=\frac{(R2-R1)}{R1(T2-T1)} \\ T2-T1=\frac{(R2-R1)}{\alpha\times R1} \\ T2=\frac{(R2-R1)}{\alpha\times R1}+T1 \end{gathered}[/tex]Substituting the values, the final temperature will be
[tex]\begin{gathered} T2=\text{ }\frac{92.307-80}{4.5\times10^{-4}\times80}+20 \\ \approx360^{\circ}\text{ C} \end{gathered}[/tex]Thus, the final temperature is 360 degrees Celsius.
How does the work needed to stretch a spring 2 cm compare to the work needed to stretch it 1 cm.A.Same amount of workB.twice the workC.4 times the work D.8 times the work
Answers
The work required to stretch a string is given by the following equation:
[tex]W=\frac{1}{2}kx^2[/tex]Where:
[tex]\begin{gathered} k=\text{ string constant} \\ x=\text{ distance the string is stretched} \end{gathered}[/tex]If the string is stretched 2 cm then we substitute the value of "x = 2" in the formula, we get:
[tex]W_2=\frac{1}{2}k(2)^2[/tex]Solving the square and simplifying:
[tex]W_2=2k[/tex]Now, if the string is stretched 1 cm we get:
[tex]W_1=\frac{1}{2}k(1)^2[/tex]Solving the operations:
[tex]W_1=\frac{1}{2}k[/tex]Now, we determine the quotient between W2 and W1:
[tex]\frac{W_2}{W_1}=\frac{2k}{\frac{1}{2}k}[/tex]Simplifying we get:
[tex]\frac{W_2}{W_1}=4[/tex]Now, we multiply both sides by W2:
[tex]W_2=4W_1[/tex]Therefore, the work required to stretch the string 2 cm is 4 times the work to stretch it 1 cm.
How long would it take to pass 700 C of charge through a toaster drawing 10 A of current? How many electrons would pass through the toaster in this time?
Answers
Given that the charge of the toaster is q =700 C
The current of the toaster is I = 10 A
We have to find the time and number of electrons.
Time can be calculated by the formula,
[tex]t=\frac{q}{I}[/tex]Substituting the values, the time will be
[tex]\begin{gathered} t=\frac{700}{10} \\ =70\text{ s} \end{gathered}[/tex]The number of electrons can be calculated by the formula,
[tex]n=\frac{q}{e}[/tex]Here, n is the number of electrons
and e is the charge of the electron whose value is
[tex]1.6\text{ }\times10^{-19}\text{ C}[/tex]Substituting the values, the number of electrons will be
[tex]\begin{gathered} n\text{ = }\frac{700}{1.6\times10^{-19}} \\ =4.375\text{ }\times10^{-17} \end{gathered}[/tex]7. What is the velocity of a 850kg car after starting at rest when 13,000J of work is done to it.
Answers
Answer:
5.53 m/s
Explanation:
The work is equal to the change in the kinetic energy, so
[tex]\begin{gathered} W=\Delta KE \\ W=\frac{1}{2}m(v^2_f-v^2_i)^{}^{} \end{gathered}[/tex]Since the car starts at rest, the initial velocity vi = 0 m/s, so we can solve for the final velocity vf as follows
[tex]\begin{gathered} W=\frac{1}{2}mv^2_f \\ 2W=mv^2_f \\ \frac{2W}{m}=v^2_f \\ v_f=\sqrt[]{\frac{2W}{m}} \end{gathered}[/tex]So, replacing the work W = 13,000J and the mass m = 850kg, we get:
[tex]\begin{gathered} v_f=\sqrt[]{\frac{2(13,000J)}{850\operatorname{kg}}} \\ v_f=5.53\text{ m/s} \end{gathered}[/tex]Therefore, the velocity is 5.53 m/s
Describe the mathematical relationship between the distance (d) and the attractive force (F) between protons and electrons.
Answers
The attractive force and the distance are inversely proportional.
[tex]F\propto\frac{1}{r}[/tex]This relation means that the attractive force decreases as the distance increases, and the attractive force increases as the distance decrease.
A 20.0 kg penguin slides at a constant velocity of 3.3 m/s down an icy incline. The incline slopes above the horizontal at an angle of 6.0°. Determine the coefficient of kinetic friction.
Answers
The coefficient of kinetic friction down the slope is 0.105.
What is kinetic friction?Kinetic friction is the friction that exists or acts between the surfaces of one object moving over another.
The kinetic frictional force of an object moving on an inclined plane is give by the formula below:
Kf = μk * mg *cosθ
where;
μk = coefficient of kinetic friction.
mg cosθ = component of the weight perpendicular to the inclined plane
θ = angle of inclination
For an object moving at a constant velocity, the component of the weight down the slope (mg sinθ) is equal to the kinetic frictional force.
Hence, μk * mg *cosθ = mg sinθ
μk = mg sinθ / mg *cosθ
μk = tan θ
μk = tan 6.0
μk = 0.105
Learn more about kinetic friction at: https://brainly.com/question/20241845
#SPJ1
What word am I looking for I have already tried losing
Answers
We will have the following:
neutral object becomes charged by losing electrons.
Does scarcity effect everyone?
Answers
Answer: Scarcity affects society in every way. First and foremost, scarcity affects the way that individuals make choices. Time and money are two examples of scarce resources that we make choices with every day.
On a fishing trip Justin rides in a boat 12 km south. The fish aren't biting so they go 4 km west. They then follow a school of fish 1 km north. What is his total displacement?
Answers
ANSWER:
The displacement is 11.7 km
STEP-BY-STEP EXPLANATION:
The displacement is the vector sum from the start point to the end point. Vector addition is applying the formula of the distance between two points.. We will use this formula:
[tex]d=\sqrt[]{(x_2-x^{^{}}_1)^2+(y_2-y_1)^2^{}}[/tex]To better understand the exercise, we will draw a picture of the situation, it would look like this:
Replacing the points (-4, -11) and (0, 0)
[tex]\begin{gathered} d=\sqrt[]{(-4-0^{}^{}_{})^2+(-11_{}-0_{})^2} \\ d=\sqrt[]{16+121^{}} \\ d=\sqrt[]{137} \\ d=11.7 \end{gathered}[/tex]When a 10 V battery is connected to a resistor, 5 A of current flows through the resistor. What is the resistor's value?
Answers
Given data
*The value of battery voltage is V = 10 V
*The current flows through the resistor is I = 5 A
The formula for the resistor is given by the Ohm's law as
[tex]R=\frac{V}{I}[/tex]Substitute the values in the above expression as
[tex]\begin{gathered} R=\frac{10}{5} \\ =2\text{ ohm} \end{gathered}[/tex]A person is running at a velocity vv. By which factor would they need to increase their speed in order to double their kinetic energy?
Answers
The kinetic energy is given by:
[tex]K=\frac{1}{2}mv^2[/tex]If we want to double it then we have:
[tex]2(\frac{1}{2}mv^2)=\frac{1}{2}m(\sqrt[]{2}v)^2[/tex]Therefore the speed has to increas by a factor of square root of 2
A) the frictional force F newtonsB)The resultant normal reaction of the surface on the metal block
Answers
Given:
The mass of the block is.
[tex]m=10\text{ kg}[/tex]The tension on the rope is,
[tex]T=100\text{ N}[/tex]The angle with the horizontal is,
[tex]\theta=60^{\circ}[/tex]The block is moving with constant speed.
as the block is moving with constant speed, the net force on the block will be zero.
Part (A)
we can write in the horizontal direction the component of the tension will be equal to the frictional force and we write,
[tex]\begin{gathered} T\cos 60^{\circ}=F \\ F=100\cos 60^{\circ} \\ F=50\text{ N} \end{gathered}[/tex]Hence the frictional force is 50 N.
\\
Part(B)
The resultant normal reaction will be,
[tex]\begin{gathered} N=T\sin 60^{\circ}-mg \\ =100sin60^{\circ}-10\times9.8 \\ =-11.4\text{ N} \end{gathered}[/tex]hence the resultant normal reaction is -11.4 N.
a 298 kg boat is being propelled forward with a force of 2,365 N. What is the acceleration of the boat if it has a resistance force (rewarded) due to wind and water of 878 N? (Write answer as a 2 digit number)
Answers
The acceleration of the boat is 4.9m/s²
Mass of boat= 298 kg
Forward force= 2365 N
Resistance force= 878N
We need to apply the concept of laws of motion
Net force= Forward force- Resistance force
Net force= 2365-878 N
= 1487 N
Net force= mass x acceleration
2365= acceleration x 298
acceleration = 4.9 m/s²
Therefore, the acceleration of the boat is 4.9 m/s²
To know more about acceleration, click on https://brainly.com/question/14344386