Answer:
I would say discovering who invented the radio.
Explanation:
The other ones can be solved by experiments and the "discovering who invented the radio" cannot be solved by an experiment.
hope this helps.
Answer:
I would say who invented the ratio
Explanation:
Well you dont need to use the scientific method to know WHO discovered it, you use it to determine HOW
Arrange the following elements in order from lowest to highest first ionization energy : AI , Ar, Cs, Na .
Answer:francium
The first ionization energy varies in a predictable way across the periodic table. The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.
Explanation:
The least measure of the energy needed to remove the loosely bound electron of an atom or a molecule is called ionization energy.
The correct order from lowest to highest first ionization energy is:
CsNaAlArThis can be explained as:
(Cs) Caesium will have the lowest energy because in the periodic table it comes in the same group as (Na) sodium. In the group, from top to bottom the ionization energy decreases.(Al) aluminium and (Ar) argon lies in the same period.In a period from left to right the ionization energy increases.Therefore, Cesium will have the least ionization energy as compared to sodium, aluminium and argon.
To know more about ionization energy follow the link:
https://brainly.com/question/2571722
What are two reasons that someone would want to become a scientist?
1 point
Your answer
Determine the number of moles in 5.25x1024 formula units if lead (IV) oxide.
Answer:
8.72 mol PbO₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
5.25 × 10²⁴ formula units PbO₂
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[tex]5.25 \cdot 10^{24} \ formula \ units \ PbO_2(\frac{1 \ mol \ PbO_2}{6.022 \cdot 10^{23} \ formula \ units \ PbO_2} )[/tex] = 8.71803 mol PbO₂
Step 4: Check
We are given 3 sig figs. Follow sig fig rules and round.
8.71803 mol PbO₂ ≈ 8.72 mol PbO₂
write the name of the first twenty elements with their symbols and their atomic number
Answer:
1 Hydrogen H
2 Helium He
3 Lithium Li
4 Beryllium Be
5 Boron B
6 Carbon C
7 Nitrogen N
8 Oxygen O
9 Fluorine F
10 Neon Ne
11 Sodium Na
12 Magnesium Mg
13 Aluminium Al
14 Silicon Si
15 Phosphorus P
16 Sulfur S
17 Chlorine Cl
18 Argon Ar
19 Potassium K
20. calcium Ca
Answer:
h - hydrogen (1)
he - helium (2)
li - lithium (3)
be - beryllium (4)
b - boron (5)
c - carbon (6)
n - nitrogen (7)
o - oxygen (8)
f - fluorine (9)
ne - neon (10)
na - sodium (11)
mg - magnesium (12)
al- aluminium (13)
si - silicon (14)
p - phosphorus (15)
s - sulfur (16)
cl - chlorine (17)
ar - argon (18)
k - potassium (19)
ca - calcium (20)
Plz help already late in turning it in
What is the formula for Iron (III) Bromate
Answer:
[tex]\boxed {\boxed {\sf FeBr_3}}[/tex]
Explanation:
We can assume that this is a neutral compound, meaning the charges of the ions are balanced.
We are given: Iron (III) Bromide.
We want to find the chemical formula.
First, find the symbols of the elements.
Fe: Iron Br: BromineNext, find the charges on the ions.
The Roman Numeral 3 in parentheses (III). This indicates the iron cation has a charge of +3.
We need to balance out the charge of +3 with the bromine. Bromine can have a charge of +5, +1, and -1. Since we already have a cation (positive ion), bromine must be an anion (negative ion). We also know the charge must be negative to balance out the compound.
But, the charge is only -1. That would still leave the compound unbalanced. Therefore, we must have 3 bromine atoms to balance out the iron. The 3 will become a subscript.
So, put all the information together and write the formula:
FeBr₃
A chemical formula lists the constituent elements of a compound together with the number of atoms in each element's smallest unit, such as a molecule or formula unit. Here the formula for Iron (III) Bromate is FeBr₃.
A compound's chemical composition is symbolically represented by its chemical formula. Chemical formulas reveal the elements that make up a compound's molecules as well as the ratio in which their atoms combine to create those molecules.
The sorts of atoms and their numbers in an element or compound are described by a chemical formula. Each element's atoms are denoted by one or two distinct letters. a collection of chemical symbols indicating the constituent elements and their corresponding ratios.
To know more about chemical formula, visit;
https://brainly.com/question/33415196
#SPJ6
What is the difference between elements and compounds? *
Think about your morning from when you wake up until you arrive at school. Describe the forms of energy you encounter or use during that time. (Use types of energy like electrical, mechanical, thermal, etc)
Answer:
When sleeping the energy exhibited is Potential energy. When I wake up and I’m preparing for the day I use kinetic energy which is the energy exhibited during motion.
Eating before leaving the house means I used chemical energy for replenishment of nutrients to aid the performance of more activities for the day. The food eaten and the physical activities also give rise to thermal energy which is why we sweat.
This reaction type occurs when different atoms in two different compounds trade places.
A) synthesis
B) decomposition
C) double replacement
D) single replacement
Double replacement is the reaction that typically occurs when different atoms in two different compounds trade places (Option C).
What is double-replacement?Double-replacement is a class of chemical reaction where two atoms can exchange their places to generate new combinations.
This type of chemical reaction (double-replacement reaction) is very common in nature.In conclusion, double replacement is the reaction that typically occurs when different atoms in two different compounds trade places (Option C).
Learn more about double-replacement reaction here:
https://brainly.com/question/23918356
#SPJ2
Can someone pls help
How long would it take a current of 10A to deposit 6.36g of copper during the electrolysis of copper (ll) tetraoxosulphate VI solution. (Cu = 63.5,1F=96500C)
Cu2+ + 2e- Cu
It take 0.54 hours to deposit 6.36g of copper
Further explanationFaraday's Law I
"The mass of the substance formed at each electrode is proportional to the electric current flowing in the electrolysis
W = e.i.t / 96500
[tex]\tt \large {\boxed {\bold {W \: = \: \dfrac {e \times i \: x \: t} {96500}}}}[/tex]
e = equivalent = Ar / valence
i = current, A
t = time, s
W=6.36 g
e = 63.5 : 2 =31.75
i = 10 A
[tex]\tt t=\dfrac{W\times 96500}{e.i}\\\\t=\dfrac{6.36\times 96500}{31.75\times 10 }\\\\t=1933.04~s\approx 0.54~hours[/tex]
Can somebody that is good at science help me with these two questions? Please and thank you!
Calculate the atomic mass of copper if copper-63 is 69.17% abundant and copper-65 is 30% abundant
Answer:List of isotopes
Nuclide Z Isotopic mass (Da)
Excitation energy
63Cu 29 62.9295975(6)
64Cu 29 63.9297642(6)
65Cu 29 64.9277895(7)
Explanation:
Explain why the following structure is incorrect
Answer:
there is too many electrons around the shell
Explanation:
What is the chemical formula for zinc (II) phosphate?
Answer:
Zn^3(PO4)2
Explanation:
thats the formula
The chemical formula for compound zinc (II) phosphate is Zn₃(PO₄)₂.
Zinc (II) phosphate is an inorganic chemical compound that is made up of zinc cations and phosphate anions .The chemical formula for zinc (II) phosphate is obtained by combining three zinc cations with two phosphate anions to achieve the neutral charge.
Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
Thus, chemical formula for compound zinc (II) phosphate is Zn₃(PO₄)₂.
Learn more about chemical formula,here:
https://brainly.com/question/32018188
#SPJ6
State the total number of electrons occupying all the p- orbitals in one atom of chlorine .
Answer:A chlorine atom in its ground state has a total of seven electrons in orbitals related to the atoms third energy level.
Explanation:
in which group on the periodic table does the atom pictures belong?
a) 4
b) 6
c) 16
d) 14
Answer: Group 14
Explanation:
It's a carbon atom with 4 valance electrons.
Girls are usually completely physically mature by _____ years old.
A.
17
B.
19
C.
14
D.
21
Please select the best answer from the choices provided. Anyone know for EDGE
A
B
C
D
Answer:
a 17 bc it is how it works
Girls are usually completely physically mature by 18 years old.
What is puberty ?Puberty refers to the physical transformation of a child's body into an adult one capable of fertile reproduction.
In girls puberty generally attains before two years earlier than the boys. And the exact age of the girls to attain puberty is in between the age of 10 to 14.
Hence the age of girls to attain puberty is 14.
To know more about puberty, visit the below link:
https://brainly.com/question/25821562
#SPJ2
Based on the diagram shown, how many electrons does this atom have?
a.six
b.three
c.nine
d.one
Answer:
B. Three
Explanation:
The three dots that are surrounding the nucleus are electrons.
Explanation:
According to the diagram, the atom has 3 electrons.
Electronic configuration =
1s² 2s¹
Element = LithiumSymbol = LiPeriod = 2Group = 1 (Alkali metal) valency = 1Therefore,
Option B is correct✔
How many grams of CaCI2 (molar mass = 111 g/mol) are needed to prepare 100.mL of 0.100 M CI-(aq) ions?
a.) 0.555 g
b.) 1.11 g
c.) 2.22 g
d.) 5.55 g
I will mark as brainliest if you give the correct answer (brief explanation only, no worries)
Answer:
a
Explanation:
Because that is the answer
How can magnetic force be exerted on objects?
1)Over a distance and anytime an object is in a magnet's field of influence.
2)Only through objects.
3)Only by touching an object.
Jessica is holding a ball. What happens when she lets go of the ball as a result of forces acting on it?
WHATS THE DIFFERENCE BETWEEN MASS AND WEIGHT WELPPPPP
Answer:
Mass is amount of matter. Weight is how that matter is affected by gravity.
Explanation:
What are three physical properties that could be used to identify gold?
Answer:
solid ,hard, not see through
Explanation:
Answer:
There are many properties out there, so three include bright yellow color, luster shine, and the maleability that determines the durability.
Who said that the atom had to have small negative particles suspended
in a positive cloud-like substance?
Answer:
hello
Explanation:
Fill in the blanks using terms from this unit.
Even though plants are rooted in the ground, they still move, exert
Blank Options
choose your answer...
and do
Blank Options
choose your answer...
.
Plant cells have very strong cell walls that allow
Blank Options
choose your answer...
to build up inside of the cell as water is absorbed. This pressure is called
Blank Options
choose your answer...
.
When turgor pressure is high enough in a cell, the cell walls become
Blank Options
choose your answer...
and As a result, the cell becomes rigid and the plant is able to stand
Blank Options
choose your answer...
and straight. When a plant does not get enough water, the turgor pressure inside of the cells
Blank Options
choose your answer...
.
A decrease in pushing against the cell wall causes the cells to lose their
Blank Options
choose your answer...
and This causes the plant to begin to droop, or
Blank Options
choose your answer...
.
When the wilted plant gets enough water, the cells will become rigid again, and the plant will stand firm and straight once again.
Answer:
Even though plants are rooted in the ground, they still move, exert force, and do work.
Plant cells have very strong cell walls that allow pressure to build up inside of the cell as water is absorbed. This pressure is called turgor.
When turgor pressure is high enough in a cell, the cell walls become firm and as a result, the cell becomes rigid and the plant is able to stand tall and straight.
When a plant does not get enough water, the turgor pressure inside of the cells decreases. A decrease in pressure pushing against the cell wall causes the cells to lose their shape and shrink. This causes the plant to begin to droop or wilt.
When the wilted plant gets enough water, the cells will become rigid again, and the plant will stand firm and straight once again.
Explanation:
*WILL GIVE A BRAINIEST & 15 POINTS TO THE CORRECT ANSWER*
When an electron falls back to its original shell, the electron will...
A.) absorb energy as it goes to the excited state
B.) absorb energy as it goes to the ground state
C.) release energy as it goes to the excited state
D.) release energy as it goes to the ground state
Answer: D
Explanation:
How many more valence electrons does this atom need to fulfill the Octet
Rule?
Answer:
In the valence shell, it should have 8 valence electrons.
Explanation:
i need help ASAP plz its timed
Answer:
B) iron (Fe) im sure its iron
A gas-filled balloon having a volume of 1.00 L at 1.2 atm and 25°C is allowed to rise to the stratosphere (about 30 km above the surface of Earth), where the temperature and pressure are -23°C and 3.00 10-3 atm, respectively. Calculate the final volume of the balloon.
Answer: The final volume of the balloon is 335.6 L
Explanation:
To calculate the final volume of the balloon, we use the equation given by combined gas law:
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = Initial pressure = 1.2 atm
[tex]P_2[/tex] = Final pressure = [tex]3.00\times 10^{-3}[/tex] atm
[tex]V_1[/tex] = Initial volume = 1.00 L
[tex]V_2[/tex] = Final volume = ?
[tex]T_1[/tex] = Initial temperature = [tex]25^oC=[25+273]=298K[/tex]
[tex]T_2[/tex] = Final temperature = [tex]-23^oC=[-23+273]=250K[/tex]
Putting values in above equation, we get:
[tex]\frac{1.2atm\times 1.00L}{298K}=\frac{3.00\times 10^{-3}atm\times V_2}{250K}\\\\V_2=\frac{1.2\times 1.00\times 250}{298\times 3.00\times 10^{-3}}\\\\V_2=335.6L[/tex]
Hence, the final volume of the balloon is 335.6 L