People weigh less on the moon than on the Earth because:the moon is smaller and has less gravity to pull on you.the Earth has less gravity than the Moon.people weigh the same on the moon as they do on Earth.the moon is magnetized.

Answers

Answer 1

Given

People weigh less on the moon than on the Earth

To find

The correct reason for the given statement

Explanation

The moon has much lesser mass than that of the earth. It is also just 60 percent as dense as the earth. So the gravitational pull on the moon is less than on the earth and thus people weigh less on the moon

Conclusion

The correct reason is

the moon is smaller and has less gravity to pull on you.


Related Questions

carts, bricks, and bands

Which one of the following changes would increase the amount of mass?
a. Increase the number of bricks resting upon the cart.
b. Increase the number of bands that are used to pull the cart.
c. Decrease the number of bands that are used to pull the cart.
d. Use a cart that is identical in every way, except for the color that it is painted.

Answers

The change that would increase the amount of mass is Increase in the number of bricks resting upon the cart. That is option A.

What is mass?

Mass is defined as the amount or quantity of matter that makes up an object which can be measured in grams and Kilograms.

The mass of an object is dependent on the change of its weight, that is, an increase in the weight of an object increases its mass.

Since the bricks had the same mass as the cart, adding one brick to the cart would double the mass of the object. Adding two bricks to the cart would triple the mass of the object.

That is to say, when more bricks are being laid on the cart, it's weight increase leading to an increase in its mass also.

Therefore, it can be concluded that increase the amount of mass is Increase the number of bricks resting upon the cart.

Learn more about weight here:

https://brainly.com/question/25973294

#SPJ1

On which of the following does the speed of a falling object depend?a.) v ∝ mb.)v ∝ mc.)v ∝ Δh

Answers

Given:

The falling object

To find:

The dependence on the speed of the falling object

Explanation:

For an object falling freely, the total mechanical energy remains always constant. So, we can write, that the decrease in potential energy will be equal to the increase in the kinetic energy that is

[tex]\begin{gathered} \frac{1}{2}mv^2=mgh \\ v^2=2gh \end{gathered}[/tex]

Hence, the speed of the falling object does not depend on the mass it depends on the height difference.

A 60.0 kg skier with an initial speed of 14 m/s coasts up a 2.50 m high rise as shown in the figure.

Find her final speed right at the top, in meters per second, given that the coefficient of friction between her skis and the snow is 0.38?

Answers

The final speed of the skier at the top mountain is determined as 9.27 m/s.

What is the change in the energy of the skier?

The change in the energy of the skier due to frictional force is calculated as follows;

ΔP.E = Pi + Ef

where;

Pi is the initial potential at the topEf is the energy lost to friction

The distance of the plane travelled is calculated as;

sin35 = 2.5/L

L = 2.5 / sin35

L = 4.36 m

ΔP.E = mghi - μmgcosθ(L)

where;

m is the masshi is the initial heightg is acceleration due to gravityμ is coefficient of friction

ΔP.E = (60 x 9.8 x 2.5) - (0.38)(60)(9.8) cos(35) x (4.36)

ΔP.E = 671.98 1 J

The final speed of the skier at the top of the plane;

P.E = K.E

P.E = ¹/₂mv²

v² = 2P.E /m

v = √(2P.E /m)

v = √(2 x 671.98) / 60)

v = 4.73 m/s

Total speed = -4.73 m/s + 14 m/s = 9.27 m/s

Thus, due to frictional force opposing the upward motion of the skier, the final speed at the top will be smaller than the initial speed.

Learn more about final speed here: https://brainly.com/question/25905661

#SPJ1

Giving a test to a group of students, the grades and gender are summarized belowGrades vs. Gender ABCMale10316Female465If one student was chosen at random, find the probability that the student got a B.

Answers

Answer:

20.45%

Explanation:

The probability that the student got a B is

[tex]\frac{total\#of\text{ students that got B}}{\text{total students }}\times100\%[/tex]

Now, how many students are there in total?

The answer is

[tex]10+3+16+4+6+5=44\; \text{students}[/tex]

How many students got a B?

The answer is

[tex]3+6=9\; \text{students}[/tex]

therefore, the probability that the student has got a B is

[tex]\frac{9\text{ students }}{44\text{ students }}\times100\%=20.45\%[/tex]

Hence, the probability that a student has got a B is 20.45%

How much potential energy due to gravity would a person have if they were standing on top of a building that is 36.2 m high? Assume that they have a mass of 79.2 kg.

Answers

Given:

The mass of thee person is

[tex]m=79.2\text{ kg}[/tex]

The height at which person standing is

[tex]h=36.2\text{ m}[/tex]

Required: calculate the potential energy of the person

Explanation:

when anybody of mass m is at a distance h from the earth's surface then it has potential energy that is given as

[tex]P.E=mgh[/tex]

where g is the acceleration due to gravity whose value is

[tex]9.8\text{ m/s}^2[/tex]

Plugging all the values in the above relation, we get;

[tex]\begin{gathered} P.E=79.2\text{ kg}\times9.8\text{ m/s}^2\times36.2\text{ m} \\ P.E=28096.992\text{ J} \end{gathered}[/tex]

Thus, the potential energy is

[tex]28096.992[/tex]

The radioactive isotope 14C has a half-life of approximately 5715 years. Now there are 50g of 14C.(1) How much of it remains after 1600 years? (Round your answer to three decimal places.)

Answers

We know that the amount of matter is given by:

[tex]N=N_0e^{-\lambda t}[/tex]

where λ is the decay constant. The decay constant is related to the half-life of the element by the equation:

[tex]\lambda=\frac{\ln2}{t_{\frac{1}{2}}}[/tex]

Then we can express our first equation as:

[tex]N=N_0e^{-\frac{\ln2}{t_{\frac{1}{2}}}t}[/tex]

Plugging the initial amount, 50 g, the half-life of 5715 years and the time we want to know we have that:

[tex]\begin{gathered} N=50e^{-\frac{\ln2}{5715}(1600)} \\ N=41.181 \end{gathered}[/tex]

Therefore, after 1600 years there are 41.181 g

How much power is created when you perform 55 Joule of work with a time 20 sec?

Answers

Answer:

2.75 watts

Explanation:

The power is equal to the work divided by time, so

P = W/t

Then, replacing W = 55 J and t = 20 sec, we get:

P = 55 J / 20 s = 2.75 Watts

Therefore, the power created is 2.75 watts

What is absolute zero?0k0c273-100

Answers

The absolute zero is measured in Kelvin scale

Thus absolute zero is 0K.

An object is dropped from a height of 65 m above ground level. A) determine the final speed in m/s, at which the object hits the ground c) determine the distance in meters, traveled during the last second of motion before hitting the ground.

Answers

Given:

height = 65 m

Given that the object is in free fall, let's solve for the following:

• (a). determine the final speed in m/s.

To find the final velocity, apply the kinematics equation:

[tex]v^2=u^2-2ax[/tex]

Where:

v is the final velocity

u is the initial velocity = 0

a is the acceleration due to gravity = 9.8 m/s²

x is the displacement = 65 m

Thus, we have:

[tex]\begin{gathered} v^2=0^2-2(-9.8)(65) \\ \\ v^2=-(-1274) \\ \\ v^2=1274 \\ \\ \text{ Take the square root of both sides:} \\ \sqrt{v^2}=\sqrt{1274} \\ \\ v=35.69\text{ m/s} \end{gathered}[/tex]

Therefore the final speed will be -35.69 m/s.

• (c). The distance traveled during the last second of motion before hitting the ground.

To find the distance, apply the formula:

[tex]H=ut+\frac{1}{2}at^2[/tex]

Where:

H is the height.

u is the initial velocity = 0 m/s

t is the time

a is acceleration due to gravity.

Let's rewrite the formula to find the time traveled.

[tex]\begin{gathered} H=0t+\frac{1}{2}at^2 \\ \\ H=\frac{1}{2}at^2 \\ \\ t=\sqrt{\frac{2H}{a}} \end{gathered}[/tex]

Thus, we have:

[tex]\begin{gathered} t=\sqrt{\frac{2*65}{9.8}} \\ \\ t=\sqrt{\frac{130}{9.8}} \\ \\ t=\sqrt{13.26} \\ \\ t=3.64\text{ s} \end{gathered}[/tex]

Therefore, the time is 3.64 seconds.

Now, to find the distance traveled during the last second of motion, apply the formula:

[tex]s=\frac{1}{2}a(t_2^2-t_1^2)[/tex]

Where:

t2 = 3.64 seconds

t1 = 3.64 seconds - 1 second = 2.64 seconds

Thus, we have:

[tex]\begin{gathered} s=\frac{1}{2}(9.8)((3.64)^2-(2.64)^2) \\ \\ s=4.9(13.2496-6.9696) \\ \\ s=4.9(6.28) \\ \\ s=30.77 \end{gathered}[/tex]

Therefore, the distance in meters, traveled during the last second of motion before hitting the ground is 30.77 meters.

ANSWER:

(A). -35.69 m/s

(C). 30.77 m

Which of the following is true for an isolated system? I. Matter is able to freely enter or exit the system.II. Heat is able to freely enter or exit the system.III. Work is able to freely enter or exit the system.II onlyNone of the aboveI or II onlyI only

Answers

Answer:

Explanation:

Note that, an isolated system does not allow:

• the exchange of energy

,

• the exchange of matter

Therefore, in an isolated system, neither

hea

A robotic arm lifts a barrel of radioactive waste, as shown in the figure.
If the maximum torque delivered by the arm about the axis O is 3.00 x 10° N•m and the distance r is 3.00 m, what is the maximum mass m of the barrel?

Answers

The maximum mass of the barrel, with maximum torque of 3.0×10° N.m delivered about the axis is 0.102 kg.

What is mass?

Mass is the quantity of matter a body contains. The S.I unit of mass is kilogram (kg). Mass can also be defined as the ratio of the force to the acceleration of a body.

To calculate the maximum mass of the barrel, we use the formula below.

Formula:

m = τ/dg........... Equation 1

Where:

m = Maximum Mass of the barrel τ =  maximum Torque deliveredd = Distanceg = Acceleration due to gravity.

From the question,

Given:

τ = 3.00×10° N.md = 3.00 mg = 9.8 m/s²

Substitute the values above into equation 1

m = (3.00×10°/3×9.8)m = 1/9.8 kg.m = 0.102 kg.

Hence, the  maximum mass of the barrel is 0.102 kg.

Learn more about mass here: https://brainly.com/question/19385703

#SPJ1

A worker pushes horizontally on a large crate with a force of 245 N, and the crate is moved 3.5 m. How much work was done? answer in : ___J

Answers

The amount of work done by a force can be written as the following:

[tex]W=F.\Delta x[/tex]

For our case, we can replace our values and we'll get:

[tex]W=245*3.5=857.5J[/tex]

Thus, the amount of work done is 857.5J

n a slap shot, a hockey player accelerates the puck from a velocity of 5 m/s to 30 m/s in the same direction. If the puck moves over a distance of 10 m during this process, what was the acceleration?

Answers

Given data

*The given initial velocity of the puck is u = 5 m/s

*The given final velocity of the puck is v = 30 m/s

*The given distance is s = 10 m

The formula for the acceleration is given by the kinematic equation of motion as

[tex]\begin{gathered} v^2=u^2+2as \\ a=\frac{v^2-u^2}{2s} \end{gathered}[/tex]

Substitute the known values in the above expression as

[tex]\begin{gathered} a=\frac{(30)^2-(5)^2}{2\times10} \\ =43.75m/s^2 \end{gathered}[/tex]

Hence, the acceleration of the puck is a = 43.75 m/s^2

Jeff tosses a can of soda pop to Karen, who is standing on her 3rd floor balcony a distance of 8.5m above Jeff’s hand. Jeff gives the can an initial velocity of 16m/s, fast enough so that the can goes up past Karen, who catches the can on its way down. Calculate the velocity of the can the instant before Karen grabs the can. How long after Jeff tosses the can does Karen have to prepare to catch it?

Answers

ANSWER

9.51 m/s

EXPLANATION

We know that Jeff is 8.5m below Karen. He tosses the can up with initial velocity u = 16m/s and it passes where Karen is, so the maximum height of the can is 8.5m plus some more meters x. Then Karen catches the can in its way down, so when she does the can goes this distance x.

Let's find this distance. The height of an object thrown up with initial velocity u is:

[tex]y=ut-\frac{1}{2}gt^2[/tex]

We know u = 16m/s but we don't know the time. This we can find from the final velocity of the can:

[tex]v=u-gt[/tex]

At its maximum height the velocity is zero:

[tex]0=u-gt[/tex]

Solving for t:

[tex]t=\frac{u}{g}[/tex]

If we assume g = 9.8m/s²:

[tex]t=\frac{16m/s}{9.8m/s^2}=1.63s[/tex]

We know that the can was in the air for 1.63 seconds until it reached its maximum height. The maximum height is:

[tex]y=16m/s\cdot1.63s-\frac{1}{2}\cdot9.8m/s^2\cdot1.63^2s^2[/tex][tex]y=26.08m-13.02m=13.06m[/tex]

This is the maximum height of the can. The extra distance the can travelled above Karen is:

[tex]x=13.06m-8.5m=4.56m[/tex]

In the can's way down, the initial velocity is 0, because it starts falling after stopping in its way up. The acceleration is still the acceleration of gravity and the height it falls is x. We can find the time it took to reach Karen's hand after it started falling:

[tex]y=\frac{1}{2}gt^2[/tex]

Note that in this case we use the acceleration of gravity positive because it is in the same direction of the can's motion. Solving for t:

[tex]t=\sqrt[]{\frac{2y}{g}}[/tex][tex]t=\sqrt[]{\frac{2\cdot4.56m}{9.8m/s^2}}=\sqrt[]{0.93s^2}=0.97s[/tex]

Knowing that the can was in the air for another 0.97 seconds after starting falling until it reached Karen's hand, we can find its velocity at that instant:

[tex]v=u+gt[/tex]

Remember that in this case u = 0:

[tex]v=gt=9.8m/s^2\cdot0.97s=9.51m/s[/tex]

The velocity of the can the instant before Karen grabs it is 9.51 m/s

carts, bricks, and bands

5. What acceleration results when 2 rubber bands stretched to 20 cm are used pull a cart with one brick?
a. About 0.25 m/s2
b. About 0.50 m/s2
c. About 0.75 m/s2
d. About 1.00 m/s2

Answers

B.  The acceleration results when 2 rubber bands stretched to 20 cm are used pull a cart with one brick is 0.5 m/s².

What is the applied force on an object?

The force applied on object is obtained by multiplying the mass and acceleration of the object.

According to Newton's second law of motion, the force exerted on an object is directly proportional to the product of mass and acceleration of the object.

Also, the applied force is directly proportional to the change in the momentum of the object.

Mathematically, the force acting on object is given as;

F = ma

a = F/m

where;

a is the acceleration of the objectm is the mass of the objectF is the applied force

From the trials, the acceleration results when 2 rubber bands stretched to 20 cm are used pull a cart with one brick is 0.5 m/s².

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

A sound wave of wavelength 1.66m at a temperature of 23 C is produced for 2.5 seconds. How far does this wave travel? How many complete waves are emitted in this time interval?

Answers

To find how far it travels, we just have to multiply

[tex]1.66\times2.5=4.15[/tex]

It travels 4.15 meters.

During this interval, there are emitted 2.5 waves.

How long does it take to  stop a 1000 kg object moving at 20 m/s with a force 5000N? 2500 N, 1000 N, 500 N, 400 N, 200 N, 100 N

Answers

ANSWER

[tex]\begin{gathered} 5000N\Rightarrow4s \\ 2500N=8s \end{gathered}[/tex]

EXPLANATION

To find the time taken to stop the object, we first have to find the acceleration of the object.

Since the force is working to stop the object (slow down the object), it means that the object is decelerating (slowing down).

To find the acceleration (deceleration), apply Newton's second law of motion:

[tex]F=ma[/tex]

where F = force; m = mass; a = acceleration

Therefore, for a force of 5000N, we have that:

[tex]\begin{gathered} 5000=1000\cdot a \\ \Rightarrow\frac{5000}{1000}=a \\ \Rightarrow a=5m\/s^2 \end{gathered}[/tex]

Now, we can apply Newton's equation of motion to find the time taken to stop the object:

[tex]v=u-at[/tex]

where v = final velocity = 0 m/s; u = initial velocity = 20 m/s; t = time taken

Note: the negative sign indicates deceleration

Hence, the time taken for a force of 5000N to stop the object is:

[tex]\begin{gathered} 0=20-5\cdot t \\ \Rightarrow5t=20 \\ \Rightarrow t=\frac{20}{5} \\ t=4s \end{gathered}[/tex]

For a force of 2500N, the deceleration is:

[tex]\begin{gathered} 2500=1000\cdot a \\ a=\frac{2500}{1000} \\ a=2.5m\/s^2 \end{gathered}[/tex]

Hence, the time taken for a force of 2500N to stop the object is:

[tex]\begin{gathered} 0=20-2.5\cdot t \\ \Rightarrow2.5t=20 \\ t=\frac{20}{2.5} \\ t=8s \end{gathered}[/tex]

Analyze the collision of a baseball with a bat. During which portion of the collision does the baseball’s velocity reach zero?1) before the collision2) during the collision3) one second after the collision4) one-hundredth of a second after the collision

Answers

ANSWER:

2) during the collision

STEP-BY-STEP EXPLANATION:

We have that when a baseball ball collides with a bat, its velocity changes from positive to negative, that is, the ball when hit with an opposing force changes its direction exactly opposite to the initial one.

Therefore, during the collision, at some point in time, the velocity of the ball reaches zero and then finally changes its direction associated with an increase in the velocity of the ball.

It’s an assessment Jane multiplied 825x22 and got 3,300. Flynn multiples the same numbers and got 18,150 Which student is correct?

Answers

In order to determine which student is correct, multiply the given numbers, as follow:

8 2 5

x 2 2

1 6 5 0

1 6 5 0

1 8 1 5 0

As you can notice, the result of the multiplcation is 18,150, hence, Flynn is right.

An electric motor is used to do the 2.30 x104 J of work needed to lift an engine out of a car. If the motor draws a current of 3.2 A for 30 s, calculate the potential difference across the motor.

Answers

Given data

*The given energy is U = 2.30 x 10^4 J

*The given current is I = 3.2 A

*The given time is t = 30 s

The formula for the charge is given as

[tex]q=It[/tex]

Substitute the known values in the above expression as

[tex]\begin{gathered} q=(3.2)(30) \\ =96\text{ C} \end{gathered}[/tex]

The formula for the potential difference across the motor is given as

[tex]U=qV[/tex]

Substitute the known values in the above expression as

[tex]\begin{gathered} 2.30\times10^4=(96)V \\ V=239.58\text{ V} \\ \approx240\text{ V} \end{gathered}[/tex]

Hence, the potential difference across the motor is V = 240 V

order the colors of the discuses to show the size of the force applied to throw each discus

Answers

Since the acceleration will be the same for all, the order would be the following [From larger to smaller force]:

Blue

Green

Orange

Red

Purple

Convert each quantity to the indicated units.
a. 3.01 g to cg
b. 6200 m to km
c. 0.13 cal/g to kcal/g

Answers

Answer:

Explanation:

a) 301 cg

b) 6.2 km

c) 0.00013

Part of a light ray striking an interface between air and water is refracted, and part is reflected, as shown. The index of refraction of air is 1.00 and the index of refraction of water is 1.33. The frequency of the light ray is 7.85 x 10^16 Hz.(a) If angle 1 measures 40°, find the value of angle 2.(b) If angle 1 measures 40°, find the value of angle 3.(c) Calculate the speed of the light ray in the water.(d) Calculate the wavelength of the light ray in the water.(e) What is the largest value of angle 1, that will result in a refracted ray?

Answers

We will use Snell's law, which states:

[tex]n_1\sin \theta_1=n_2\sin \theta_2[/tex]

Where n1 and n2 are the refraction indexes and their respective angles are "theta1" and "theta2".

For part A we replace the values:

[tex]1\sin 40=1.33\sin \theta_2[/tex]

Now we solve for "theta2" first by dividing both sides by 1.33:

[tex]\frac{\sin40}{1.33}=\sin \theta_2[/tex]

Now we use the inverse function for sine:

[tex]\arcsin (\frac{\sin 40}{1.33})=\theta_2[/tex]

Solving the operation:

[tex]28.9=\theta_2[/tex]

For part B, since "theta1" and "theta3" are angles of reflection, according to the reflection law, these angles are equal, therefore:

[tex]\theta_3=\theta_1=40[/tex]

For part C. The index of refraction is defined as:

[tex]n=\frac{c}{v}[/tex]

Where "c" is the speed of light in a vacuum and "v" is the speed of light in the medium. Replacing the values:

[tex]1.33=\frac{3\times10^8\text{ m/s}}{v}[/tex]

Now we solve for "v":

[tex]v=\frac{3\times10^8\text{ m/s}}{1.33}[/tex]

Solving the operation:

[tex]v=2.26\times10^8\text{ m/s}[/tex]

For part d. We will use the following formula:

[tex]\lambda=\frac{v}{f}[/tex]

Where "v" is the speed and "f" is the frequency. Replacing we get:

[tex]\lambda=\frac{2.26\times10^8\text{ m/s}}{7.85\times10^{16}s^{-1}}[/tex]

Solving the operations:

[tex]\lambda=0.288\times10^{-8}m[/tex]

For part e. The largest value of the angle of incidence that will result in refraction is 90 degrees.

A snowmobiler travels 65km [37° E of S]. How far east does she travel?

Answers

ANSWER:

39.1 km

STEP-BY-STEP EXPLANATION:

To better understand the problem, we make a sketch, like this:

Therefore, we can determine the distance east with the cosine function, like this:

[tex]\begin{gathered} \cos\theta=\frac{\text{ adjacent}}{\text{ hypotenuse}} \\ \\ \theta=53\degree \\ \\ \text{ adjacent =}E \\ \\ \text{ hypotenuse = 65} \\ \\ \text{ We replacing:} \\ \\ \cos53\degree=\frac{E}{65} \\ \\ E=65\cdot\cos53\degree \\ \\ E=39.1\text{ km} \end{gathered}[/tex]

The distance to the east is 39.1 km

A 72.5 kg student sits at a desk 1.25 m away from a 80.0 kg student. What is the magnitude of the gravitational force between the two students?

Answers

Given:

The mass of one student is,

[tex]m_1=72.5\text{ kg}[/tex]

The mass of the other student is,

[tex]m_2=80.0\text{ kg}[/tex]

The distance between them is,

[tex]d=1.25\text{ m}[/tex]

The gravitational force between them is,

[tex]F=G\frac{m_1m_2}{d^2}[/tex]

Here the gravitational constant is,

[tex]G=6.6\times10^{-11}\text{ }\frac{N.m^2}{\operatorname{kg}}[/tex]

Substituting the values we get,

[tex]\begin{gathered} F=\frac{(6.6\times10^{-11})\times72.5\times80.0}{(1.25)^2} \\ =2.5\times10^{-7}\text{N} \end{gathered}[/tex]

Hence the second option is correct.

Multiple part question Here are the needed details:Five rotations took 5.15 seconds 1 rotation took 1.07s Distance from shoulder to elbow is 29 cm distance from shoulder to middle of the hand is 57cm.Questions:2. A how far in degrees did the hand travel during the five rotations?B. How far in radians did the hand travel during the five rotations?C. How far in meters did the hand travel during the five rotations?3. A. What was the average angular speed (degrees/s and rad/s) of the hand?B. What was the average linear speed (m/s) of the hand?C. Are the answers to a and b the same or different? Explain.4. A. What was the average angular acceleration (degrees/s squared and rad/s squared) of the hand. How do you know?B. What was the average centripetal acceleration (m/s squared) of the hand?C. Are the answers to a and b the same or different. Explain.5. A. How far (degrees and rad) did the elbow travel during the five rotations?B. How far (m) did the elbow travel during the five rotations?C. How do these compare to the hand? Why are they the same and or/different?6. A. What was the average angular speed (degrees/s and rad/s) of the elbow?B. What was the average linear speed (m/s) of the elbow?C. How do these compare to the hand? Why are they the same and or/different?7. A. What was the average angular acceleration (degrees/s squared and rad/s squared) of the elbow?B. What was the average centripetal acceleration (m/s squared) of the elbow?C. How do these compare to the hand? Why are they the same and or/ different?

Answers

Given:

Time taken for 5 rotations = 5.15 seconds

Time for 1 rotation = 1.07 seconds

Distance from shoulder to elbow = 29 cm

Distance from shoulder to the middle of the hand = 57 cm

Let's use the information above to answer the following questions.

Question 2:

Let's determine how far in degrees the hand travelled during the five rotations.

In one full rotation, we have 360 degrees.

Thus, 5 full rotations = 5 * 360 = 1800 degrees

Therefore, in 5 full rotations, the hand travelled 1800 degrees.

B. In radians, we have:

180 degrees = π rad

[tex]1800\degree=\frac{\pi}{180}\ast1800=10\pi\text{ radians}[/tex]

C. To find the distance in meters, we have:

Distance from elbow to shoulder = 29 cm = 0.29 meters

[tex]2\pi\ast5\ast0.29=9.11\text{meters}[/tex]

Therefore, the hand travelled 9.11 meters during the five rotations.

Question 3:

A. To find the average angular speed, apply the formula:

[tex]\begin{gathered} w=\frac{10\pi}{t}\text{ (rad/s)} \\ \\ w=\frac{1800}{t}\text{ (degre}es\text{/s)} \end{gathered}[/tex]

Where t = 5.15 seconds

Thus, we have:

[tex]\begin{gathered} w=\frac{10\pi}{5.15}=6.1\text{ rad/s} \\ \\ w=\frac{1800}{5.15}=349.5\text{ degre}es\text{/s} \end{gathered}[/tex]

B. Average linear speed of the hand.

To find the average linear speed of the hand, we have:

[tex]v=\frac{10\pi r}{t}=\frac{10\pi}{5.15}\ast\frac{1}{2}=3.05\text{ m/s}[/tex]

C. The average angular speed and average linear speed are the same

The heating element of an iron operates at 110 V with a current of 11 A.(a) What is the resistance of the iron? Ω(b) What is the power dissipated by the iron? W

Answers

(a)

In order to calculate the resistance, we can use Ohm's Law:

[tex]\begin{gathered} R=\frac{V}{I}\\ \\ R=\frac{110}{11}\\ \\ R=10\text{ \Omega} \end{gathered}[/tex]

(b)

To calculate the power, we can use the formula below:

[tex]\begin{gathered} P=I\cdot V\\ \\ P=11\cdot110\\ \\ P=1210\text{ W} \end{gathered}[/tex]

You observe waves on the beach and measure that a wave hits the beach every 5 seconds. What is the period and the frequency of the waves ?

Answers

Answer:

Period = 5 seconds

Frequency = 0.2 Hz

Explanation:

The period is the time per cycle. So, if a wave hits the beach every 5 seconds, the period will be 5 seconds.

Additionally, the frequency is the inverse of the period, so the frequency of the waves can be calculated as:

[tex]\text{frequency = }\frac{1}{Period}=\frac{1}{5}=0.2\text{ Hz}[/tex]

So, the answers are:

Period = 5 seconds

Frequency = 0.2 Hz

Timmy walks 5 m North, 3m West, and finally 1 m South. What is his displacement from his starting point?

Answers

Timmy walks 5 m North, 3m West, and finally 1 m South then his displacement from the starting point would be 5 meters in the northwest direction.

What is displacement?

Displacement describes this shift in location and it is calculated with the help of the initial and the final position of the object.

As given in the problem If Timmy walks 5 m North, 3m West, and finally 1 m South ,

The resultant displacement of the Timmy = √(4² + 3²)

                                                              = 5 meters

                                       

Thus, the resultant displacement of the Timmy would be 5 meters

Learn more about displacement here, refer to the link ;

brainly.com/question/10919017

#SPJ1

In lacrosse, a ball is thrown from a net on the end of a stick by rotating the stick and forearm about the elbow. If the angular velocity of the ball about the elbow joint is 31.3 rad/s and the ball is 1.45 m from the elbow joint, what is the velocity of the ball?

Answers

The linear velocity of the ball whose angular velocity is 31.3 rad/s about the elbow joint will be 45.385 m/s.

What is angular velocity?

Angular velocity is the rate of change of angular displacement with respect to time. Mathematically -

ω = dθ/dt

from this we can write -

dθ = ω dt

∫dθ = ω ∫dt

θ₂ - θ₁ = ω(t₂ - t₁)

Δθ = ω Δt

ω = Δθ/Δt

Given is a ball thrown from a net on the end of a stick by rotating the stick and forearm about the elbow. The angular velocity of the ball about the elbow joint is 31.3 rad/s and the ball is 1.45 m from the elbow joint.

The relation between linear velocity and the angular velocity of a body undergoing circular motion is given by -

v = rω

From this we can write -

ω = 31.3 rad/s

r = 1.45 m

Substituting the values -

v = rω

v = 1.45 x 31.3

v = 45.385 m/s

Therefore, the linear velocity of the ball whose angular velocity is 31.3 rad/s about the elbow joint will be 45.385 m/s.

To solve more questions on circular motion, visit the link below-

https://brainly.com/question/12898117

#SPJ1

Other Questions
if the quantity of concert tickets sold decreases by 10 percent when the price increases by 5 percent, the price elasticity of demand over this range of the demand curve is: group of answer choices unitary elastic. perfectly inelastic. price inelastic. price elastic. Help me asp please!! a turtle swims 15 kilometers in 9 hours how long does it take the turtle to swim 18 kilometers? 5. What is the best revision to make in sentence 17?Another story coming from California was in the1800s when Wells Fargo hired Charley Parkhurst hewas to drive a stagecoach there.Another story comes from California, where in the1800s, Wells Fargo hired Charley Parkhurst to drive astagecoach.Another story comes from California. Where in the1800s, Wells Fargo hired Charley Parkhurst to drive astagecoach.Another story comes from California, in the 1800s,Wells Fargo hired Charley Parkhurst to drive astagecoach there. sylvester had a traumatic injury to his brain that left him without the ability to feel euphoria or reinforcement from cocaine. what brain area was damaged? A fireman standing on a 14 m high ladderoperates a water hose with a round nozzle ofdiameter 2.65 inch. The lower end of the hose(14 m below the nozzle) is connected to thepump outlet of diameter 3.49 inch. The gaugepressure of the water at the pump isCalculate the speed of the water jet emerg-ing from the nozzle. Assume that water is anincompressible liquid of density 1000 kg/m3and negligible viscosity. The acceleration ofgravity is 9.8 m/s?Answer in units of m/s. Knowing historical information as well as current information in society is a feature of which type of literacy?. Where do people consume the most energy from fossil fuels? four of the options apply to fermentation but not to aerobic cellular respiration. find the option that applies to aerobic cellular respiration. group of answer choices does not require oxygen. does not require an electron transport chain. makes a lot of atp from one glucose. provides energy for a sprint. produces atp very fast. first answer will be brainliestYou decide to use a scale of 1 in: 7 ft to make a scale drawing of your classroom. If the actual length of your classroom is 49 feet, what should the length of the classroom in the drawing be? Consider the equation. Y=x^2+1The next step in graphing a parabola is to find points that will determine the shape of the curve. Find the point on the graph of this parabola that has the x-coordinated x= -2 Suppose that a category of world class runners are known to run a marathon (26 miles) in an average of 145 minutes with a standard deviation of 12 minutes. Consider 49 of the races.LetX = the average of the 49 races.Please see attachment for questions Find the probability and odds of winning the two-number bet (split) in roulette. Then find expected value of a $1 bet in roulette for the two-number bet.P.S Might not have enough information How does budding produce more yeast?Budding produces reproductive cells called spores.Budding splits the DNA of yeasts in two separate cells.Budding produces egg and sperm cells to create yeast cells.Budding causes the cells of the yeast to split into two separate yeast cells y = -x +3x+y = 17Are these parallel? a student conducts an experiment and finds that a sample of the solid substance he is testing conducts electricity. the student concludes that the material must be an covalent compound. what is wrong with this conclusion? Solve the system using algebraic methods.y = x + 4xy = 2x + 3x - 6Solution x = What language device is "The wind, which blows uninterruptedly" And how it describes the setting? how does cleavage differ from normal mitosis? a. the growth phases between divisions are faster. b. there are no growth phases between divisions. c. it occurs faster than normal mitosis. d. it occurs slower than normal mitosis. Rectangle CARD has a length of 2x-5 and a width of 6x+10. Triangle BEST has a length of 10x+3 and a width of 4x-7. Find the difference between triangle CARD and triangle BEST. *