Answers
Hey there!
We have the three states of matter, labelled in the picture, called gases, liquids, and solids.
But did you know that there are terms and explanations as to how a material's state can change?
Gases changing into a liquid is called condensation. This occurs when warm air collides with cold surfaces, making the cold surface 'sweat' from the warm air. We see this in the early mornings when the sun starts cooling up the grass, which was colder because of the night.
Liquids changing into a gas is called vaporization. This occurs when liquids are usually approached to a high enough temperature in which it exceeds their boiling point, and the tighter liquid molecules drift off wandering around. When molecules wander around enough, they can vaporize and turn into a gas.
Liquids turning into a solid is called freezing. This happens because in colder temperatures, molecules cannot move as quick because they are mimicking their environment; they actually clump up together because they are cold (think about it as them warming themselves up with each molecules around them!) and become a solid.
Solids turning to a liquid is called melting. When something at it's freezing point (when it is a solid) and it loses that freezing point and gets warmer, the molecules can now move around much more freely, which means that it can become a liquid.
Solids turning into a gas is called sublimination. Think of the snow droplets turning into water vapor immediately in the air. This is an example of sublimination, where a good amount of heat is given and skips the liquid phase.
Gas turning into a solid is called deposition. We already thought about the snow; so let's think of the water vapor turning into snow in the air, the opposite reaction; this is due to the excessively extreme cold air that was given to the water vapor that made it skip the liquid phase.
In this problem, we see that a block of ice is turning into water.
We can conclude that it is turning from a solid to liquid.
However, why does this occur? Like we learned before, this process is called melting; and this occurs when something that was colder than water's freezing point (32°F or 0°C) is applied warmth (which is energy) from the air to the ice, the ice will melt into a liquid. The molecules are no longer constricted to this firm slow movement and can freely move around.
Therefore,
1. The ice will melt because the air is too warm to sustain the ice's climate.
2. This happens because since the climate is presumed to be above the water's freezing point, the ice will no longer be able to maintain it's phase.
3. The ice left out would be a phase change of solid to liquid.
4. This phenomenon is called melting.
Related Questions
can someone help me pleaseeeeeeeeeeee
Answers
The greatest gravitational force is experienced when;
P = 6.0 * 10^24 KgQ = 625 Kgd = 25000 mWhat is the gravitational force?Let us recall that the gravitational force is the force that acts between any two objects that we find on the earth's surface. The gravitational force is an attractive force. We know that if we have two objects, then one object must effect a gravitational force of attraction on the other. The magnitude of the gravitational force of attraction can be obtained by the use of the formula;
F = Gm1m2/r^2
F = the gravitational force of attraction
G = gravitational constant
m1 and m2 = The masses of each of the objects
r = The distance between the objects that are found in the gravitational filed of the earth.
The larger the masses of the objects and the smaller the distance that the objects have between them, the greater the gravitational force between the objects.
Learn more about gravitational filed:https://brainly.com/question/20304286
#SPJ1
in the light dependent reaction of photosynthesis water is split, releasing high energy particles that pass down a gradient to produce energy in the form of atp. what are these particles called? group of answer choices photons protons electrons
Answers
Answer:
photons
Explanation:
protons and electrons are part of chemisty in elements
Please Help Mehhhhh!!!!!!!!!!!!!!!!!!!!!!!
Answers
thyroid hormones are principally concerned with the increase in metabolic rate of tissues that can result in certain effects. what are some of these effects? select all that apply.
Answers
Thyroid hormones are principally concerned with the increase in metabolic rate of tissues that can result in certain effects such as:
A) Increased heart rate
C) Increased body temperature
D) Increased cardiac output.
What is a Hormone?This is referred to as a chemical messenger which are produced by different types of glands and they are released directly into the bloodstream for action.
They control metabolic reactions and an example is the thyroid hormone which is located in the front of the neck. It controls growth and has other effects on the body such as increase in temperature and heart rate of the individual.
There is also an increase in the cardiac output due to the different reactions occurring which is therefore the reason why options A, C and D were chosen as the most correct choices.
Read more about Hormone here https://brainly.com/question/11979378
#SPJ1
The full question is:
A nurse is describing the action of thyroid hormones to a client. The nurse would include information that thyroid hormones are principally concerned with the increase in the metabolic rate of tissues that can result in which of the following? Select all that apply.
A) Increased heart rate
B) Decreased respiratory rate
C) Increased body temperature
D) Increased cardiac output
E) Decreased oxygen consumption
which of the following is not true concerning all bacterial plasmids? choose one: a. they may exist in multiple copies in a single cell. b. they may contain antibiotic resistance genes. c. they may be transmitted horizontally from one bacterium to another. d. they are always linear dna.
Answers
Option D i.e. they are always linear DNA is not true concerning all bacterial plasmids.
Plasmids are crucial for bacterial evolution and adaptability to the environment because they contain genes that confer advantageous characteristics on the bacterial cell. Plasmids of many sorts can coexist in the same bacterial cell.
In every bacterial cell, plasmids are present by nature. All bacterial cells include plasmids, which are tiny, circular, double-stranded DNA molecules. These plasmids can independently reproduce because they are isolated from chromosomal DNA.
The plasmids contain genes for antibiotic resistance. Virulence Plasmids: The majority of the infection in the host body is caused by plasmids that contain viral genes. Degradative Plasmids: These plasmids include genes that cause the host genome to deteriorate.
To know more about plasmids refer to the given link:
https://brainly.com/question/15565413?referrer=searchResults
#SPJ4
2. Sedimentary rocks can exhibit some similar
characteristics as a result of the processes
that formed them. Which pair of effects
would be most likely to allow for the
formation of similar sedimentary rocks?
A. the effects of particle size and energy
B. the effects of constant motion and weathering
C. the effects of hot surface interaction and
weathering
D. the effects of precipitation and a uniform
particle size
Answers
The correct answer is option A. the effects of particle size and energy
What is sedimentary rocks?
In contrast to metamorphic and igneous rocks, which are generated deep beneath the Earth, sedimentary rocks are formed on or around the surface of the planet. Weathering, dissolution, precipitation, and lithification in the earth's crust are the primary causes of the creation of sedimentary rocks.
Sedimentary rocks are constructed from pre-existing rocks or remains of extinct creatures. They emerge from deposits that amass on the Earth's surface. Sedimentary rocks can have recognizable stratification or bedding. Many of the picturesque vistas of the desert southwest contain mesas and arches made of layered sedimentary rock.
By weathering preexisting rocks, transporting the weathering byproducts, and depositing them, sedimentary rocks are created. When rocks at the Earth's surface are exposed to the atmosphere (mostly in the form of rainfall) and the hydrosphere, numerous processes of physical disintegration and chemical degradation take place. These activities result in the formation of soil, unconsolidated rock debris, and substances dissolved in runoff and groundwater. The process of erosion involves moving weathering products from the weathering site, either as solid material or as dissolved components, to finally be deposited as sediment. Sediment is any unconsolidated accumulation of solid, weathered material.
Learn more about sedimentary rocks from given link
https://brainly.com/question/7437433
#SPJ13
Suppose you are given two liquids and told that one
is a compound and the other is a mixture. How might you determine
which was which? Describe one method you could use.
Answers
By using the distillation process, we can discriminate between a chemical and a solution. Distillation can be used to separate elements, however a compound cannot be separated in this way.
What is explain distillation?Distillation is a process that turns a liquid into a vapour, which is then condensed back into a liquid state. The simplest illustration of it is when steam from a kettle condenses into drops of distilled water that are left on a cold surface.
Why is distillation used?A chemical is purified through distillation by being separated from a non-volatile or less-volatile substance. Because various compounds frequently have different boiling points, when a mixture is distilled, the components frequently separate from the mixture.
To know more about Distillation visit:
https://brainly.com/question/13345735
#SPJ13
What are the 3 domains of development in psychology
Answers
Answer:
physical, cognitive, and psychosocial development.
Explanation:
thanks to a novel recessive mutation, a certain plant species has begun to invade colder arctic regions outside of its normal range. however, this cold-tolerant mutation has not yet become fixed in the population. a second mutation arises that promotes self-pollination. do you predict that the self-pollination allele will be selected for in the arctic regions? why or why not?
Answers
Plant cell death is the intracellular sequence of activities that ends the life processes of a plant cell. Plant cells can die through necrosis, apoptosis, or autophagy.
What happens to a plant eventually, causing it to die?Senescence describes all of the alterations that occur in a plant and ultimately result in the death of its cells, tissues, and ultimately the entire plant body. Even in extremely young, thriving plants, these alterations can be visible in a few cells.
An embryo and endosperm, both of which are necessary for the growth of a viable seed, are produced in angiosperms as a result of double fertilization. Plants that are diploid create diploid embryos and triploid endosperm.
Why does the photoperiodic route, which many plants utilize, control when flowers form? In this plant, temperature and day duration both affect flowering. Flower formation is being hindered by the warm environment and prolonged exposure to light.
The aberrant transformation of floral components into leafy structures is known as phyllody. Although environmental variables that lead to an imbalance in plant hormones may also be to blame, phytoplasma or virus infections are the usual culprits.
To Learn more About Plant cell death, Refer:
https://brainly.com/question/3676716
#SPJ4
of the following, which phenotype would most likely be observed in mutants of e. coli lacking a key enzyme in the ed pathway? choose one: a. loss of ability to grow anaerobically b. inability to form biofilms c. lack of flagellar motility d. increased virulence e. reduced ability to colonize the mammalian gut
Answers
Phenotype would most likely be observed in mutants of e. coli lacking a key enzyme in the ed pathway is option b inability to form biofilms
The term "biofilm" describes the intricate, sessile colonies of bacteria that are either firmly embedded in an extracellular matrix or adhering to a surface.
An extracellular polymeric material matrix surrounds an assembly of surface-associated microbial cells that is known as a biofilm. Van Leeuwenhoek is credited with discovering microbial biofilms after he discovered bacteria on tooth surfaces using his crude microscopes. Heukelekian and Heller discovered the "bottle effect" for marine microorganisms, which states that the presence of a surface on which these organisms may cling significantly increased bacterial activity and growth. Zobell noticed that there were noticeably more bacteria on surfaces than there were in the surrounding environment (in this case, seawater). The electron microscope, which enables high-resolution photomicroscopy at far higher magnifications than the light microscope, would be necessary for a thorough analysis of biofilms
To know more about biofilms visit here ;
https://brainly.com/question/14353380
#SPJ4
Answer:
Explanation:
Option(A) reduced ability to colonize the mammalian gut is the correct answer.
E. coli uses the ED route to break down sugar acids present in the mucus of mammalian guts.
What does "ED pathway" refer to?
Pathway of Entner-Doudoroff
The metabolic process known as the Entner-Doudoroff (ED) Pathway is particularly significant in Gram-negative bacteria, some Gram-positive bacteria, and archaea.
In the ED pathway, glucose serves as the substrate, and pyruvate is produced because of a series of chemical events with the help of enzymes.
What role does the ED pathway play?
In the breakdown of gluconate (Gnt), the ED pathway enzymes Edd and Eda play important roles.
Numerous microbes can use gnt, a sugar acid present in the intestinal environment, as a source of energy.
the bacterium E. gnt is used by coli via the ED route.
What accomplishes the ED pathway?
The EMP pathway's initial steps, which include fructose derivatives, can be avoided by using the ED pathway, which offers a glycolytic shortcut.
Another glycolytic route that skips the transition from G-6-P to fructose-6-phosphate begins with the ED intermediate gluconate-6-P.
To learn more about E. coli visit:
https://brainly.com/question/1657681
#SPJ4
if the original dna sequence is 3' - gtt tac ctc tcc gac atc - 5' [template strand] 5' - caa atg gag agg ctg tag - 3' [coding/non-template strand] a point mutation occur and change the sequence to 3' - gtt tac atc tcc gac atc - 5' [template strand] 5' - caa atg tag agg ctg tag - 3' [coding/non-template strand] what type of mutation is this?
Answers
The given type of mutation is nonsense mutation which results from point mutation.
A nonsense mutation in a DNA sequence causes a premature stop codon, also known as a nonsense codon, in the transcribed mRNA as well as a shortened, ineffective, and typically nonfunctional protein product.
As was mentioned previously, a nonsense mutation happens when a stop codon replaces an amino acid's codon. A shortened and typically nonfunctional protein is the result of this mutation. By altering a tRNA molecule's anticodon sequence such that it recognizes the stop codon instead of the start codon, such a deficiency may be at least partially repressed.
Therefore, the given type of mutation is nonsense mutation which results from point mutation.
Learn more about nonsense mutation here:
https://brainly.com/question/15577866
#SPJ4
Where did life first form?
A. In the atmosphere
B. In volcanoes
C. On land
D. In the oceans
Answers
Answer: D. in the oceans.
The ocean is the most likely answer to the question as there wasn't enough oxygen in the atmosphere, the land hadn't formed continents and wasn't mineralized enough. Of course, there are many other theories including one that suggests life started in muddy pools in the land warmed by volcanoes. So there really isn't a fixed answer, but I'm fairly sure it is D.
results of cesium chloride density gradient centrifugation on genomic dna often reveal relatively small peaks of dna that separate from the main genomic dna peak and consist of 1,000s of short repetitive sequences referred to as
Answers
Results of cesium chloride density gradient centrifugation on genomic DNA often reveal relatively small peaks of DNA that separate from the main genomic DNA peak and consist of 1,000s of short repetitive sequences referred to as Satellite DNA.
What is the DNA?Deoxyribonucleic acid (DNA) is a polymer composed of two polynucleotide chains that coil around each other to form a double helix carrying genetic instructions for the development, functioning, growth and reproduction of all known organisms and many viruses.
The DNA is supposedly made of chemical building blocks called nucleotides. These building blocks are made of three parts:
a phosphate group, a sugar group and one of four types of nitrogen bases.In conclusion, it is a fact that DNA contains the instructions needed for an organism to develop, survive and reproduce.
Learn more about DNA at: https://brainly.com/question/16099437
#SPJ1
which of the following statements among a - d is false? a. an antimicrobial agent exhibiting bacteriostatic activity should always show a decrease in viable count. b. in terms of killing effect, ionizing radiation like gamma rays is generally more effective than non-ionizing radiation such as uv light. c. implementing cold temperatures for food preservation has a bacteriostatic effect rather than a bacteriocidal effect. d. disinfection is not a sterilization process. e. none of a - d is false; all are true
Answers
Among the following statements, option e is correct that is all the given statements are true.
In option a, bacteriostatic means a state of preventing the growth of bacteria, thus an antimicrobial agent persisting in this quality will decrease the growth of bacteria which is the decreased viable count. In option b, Gamma radiations are ionizing radiations but UV- radiations are non-ionizing radiation thus, gamma radiations are more harmful than UV- radiation.
In option c, Food preservation at a cold temperature gives a dormant state to bacteria thus the growth of bacteria is bacteriostatic, and not bacteriocidal. In option d, Disinfection is different from sterilization, they both are decontamination process where disinfection is the process of killing and sterilization is the process of killing.
Learn more about bacteriostatic here https://brainly.com/question/13621472
#SPJ4
What does a carbon atom do during photosynthesis?
Answers
During photosynthesis, plants capture carbon dioxide from the atmosphere, and water from the soil to carry out this process. What happens with carbon atoms is that they, with the sunlight action, will go to form glucose, whose chemical formula we can see it in the following:
[tex]6\text{ CO}_2\text{ + 6 H}_2\text{O }\rightarrow\text{ C}_6\text{H}_{12}\text{O}_6\text{ + 6 O}_{2\text{ }}[/tex]What those 6 numbers tell us, is that for each 6 carbon dioxide atoms, plus each 6 water molecules, the process will be carried out, producing one glucose molecule, plus 6 oxygen molecules.
which statement about connective tissues is true? which statement about connective tissues is true? the matrix of connective tissue is composed of both a ground substance and a fibrous component all connective tissues are avascular connective tissues are named for their most apical layers neuroglia are cells found within connective tissues
Answers
The matrix of connective tissue is composed of both a ground substance and a fibrous component this statement about connective tissues is true.
In addition to holding structures together and providing support for organs and the body as a whole, connective tissues also function to repair damaged tissues, store fat, transport substances, and defend against disease. They exist everywhere over the body. There are four categories of connective tissues: connective tissue proper, blood, bones, cartilage, and connective tissue . because blood transports various materials and gases from one area of the body to another as a result of the heart's pumping function, blood is viewed as a connective tissue. Therefore, it joins many body tissues and organs, earning its name as a connective tissue. The connective tissue that is most broadly spread in an animal's body is called areolar tissue. It is located beneath the skin and acts as a scaffolding for the epithelium.
Learn more about connective tissue here:
https://brainly.com/question/17664886
#SPJ4
6. Write a chemical equation for cellular respiration.
coman
Label the molecules involved.
Answers
Answer:
Carbon dioxide+Water Carbon Hydrogen Oxygen+Oxygen
Explanation:
Its chemical equation isCO2 +H2O C6 H12O6 +6O2
How do you correctly interpret and construct a line graph and a bar graph?
Answers
The line segments' varying slope draws attention to changes, and patterns. Changes in the line for set of data to find trends and patterns. Lines of numerous measurements share the same trend and patterns.
What is bar graph explain?Information is graphically represented in a bar graph. To represent value, it makes use of bars that stretch to various heights. Vertical bars, horizontal bars, grouped bars (several bars that compare values in a category), and stacked bars can all be used to construct bar graphs (bars containing multiple types of information).
Why do we use bar graph?It is straightforward and quick to compare sets of data between several groupings using a bar diagram. The graph has discrete values on one axis and categories on the other. To demonstrate the connection between the two axes is the aim. Bar charts can also show significant alterations in data over time.
To know more about Bar graph visit:
https://brainly.com/question/13298277
#SPJ13
I'LL MARK BRAINLIST PLS HELP ME ITS DUE NOW!!!!!!!!!!!!!!!
Answers
Answer:
Explanation:
Birds (youngest)
Dinosaurs (younger than amphibians)
Amphibians
Corals(exists between trilobites and amphibians)
Trilobites(oldest)
Answer:
birds
dinosaurs
amphibians
corals
trilobites
Explanation:
Birds are the youngest which makes them the top layer (cus they died last )Means it is A
Trilobites is the oldest which makes them the last layer ,layerE
Dinosaurs is younger than birds so it is B
And amphibians is younger than dinosaur so is either C or D
Corals is in between Trilobites and amphibians Means that amphibians will be C and corals will be D.
hope this helps u understand , and get me the BRAINLIEST please
a close look at almost any terrestrial community or ecosystem reveals that it consists of an ever-changing mosaic of patches of vegetation in different stages of .
Answers
(20!!!!!)Select the type of inheritance pattern that is best described below:
When graphed, the number of individuals of various heights forms a bell-shaped curve.
a
Pleiotropy
b
Polygenic Inheritance
c
Multiple Alleles
d
Codominance
e
Incomplete Dominance
Answers
Answer:
Polygenic Inheritance tend to result in a distribution that resembles a bell-shaped curve, with few at the extremes and most in the middle.
Bohr’s ""planetary model"" states that electrons are in specific energy levels or ""orbits"" around the nucleus. Explain how this is not possible using heisenberg’s uncertainty principle.
Answers
The speed and precise location of the electrons as they passed through the atom cannot be determined in accordance with Heisenberg's uncertainty principle.
Bohr believed that electrons traveled along circular routes as they orbited the nucleus; but, in the contemporary understanding, atomic electron structure is more akin to three-dimensional standing waves.
Rutherford's theory of the atom was expanded upon by Bohr. The majority of the atom's mass is concentrated there, in the region we now refer to as the nucleus, and electrons form a sort of cloud around the positive mass. The model's explanation utilizing the quantified energy was Bohr's most important contribution. He thought that electrons traveled in a circle around the nucleus with quantized potential and kinetic energy.
In theory, it is still thought that the model's quantification component is accurate. The concept of circular orbits for electrons is the major issue.
The Heisenberg uncertainty principle, which states that it is impossible to know a particle's position and momentum at the same time, is not satisfied by this. It also fails to account for the fact that atoms are arranged in three dimensions. The 3D structure of an atom is unlikely to exist if the orbitals are circular.
To know more about Heisenberg uncertainty principle , please refer:
https://brainly.com/question/16941142
#SPJ1
A bacterium converts light energy into chemical energy.
A. cellular respiration
B. glycolysis
C. photosynthesis
Answers
According to the research, the correct answer is C. A bacterium converts light energy into chemical energy represents the photosynthesis process.
What is photosynthesis?It is the process by which light energy is used for the synthesis of carbohydrates from CO2 and a reducing molecule.
In this sense, in nature there is a great diversity of photosynthetic bacterium, which obtain their energy from light to grow through the manufacture of sugars through chemical reactions.
Therefore, we can conclude that some bacteria are photosynthetic microorganisms capable of converts light energy to form sugars for energy.
Learn more about bacterium photosynthesis here: https://brainly.com/question/24245934
#SPJ1
which structures are part of the basal ganglia? a globus pallidus, caudate nucleus, amygdala b caudate nucleus, putamen, fornix c putamen, amygdala, mammillary bodies d globus pallidus, substantia nigra, putamen
Answers
The globus pallidus, substantia nigra and putamen are the parts of the basal ganglia.
What is basal ganglia and what are the parts of basal ganglia?Basal ganglia are a group of nuclei responsible for specific functions and roles as other ganglia are.The motor functions are the responsibility of basal ganglia as these are the group of subcortical nuclei.Here in the question is asked the parts of basal ganglia and the answer would be globus pallidus, substantia nigra and putamen.The pallidum is the basal ganglia consisting of two nuclei , and the only basal ganglia consisting of two nuclei.Hence the structures and the parts of basal ganglia are globus pallidus, substantia nigra and putamen.To know more about basal ganglia visit:
https://brainly.com/question/17924696
#SPJ4
Explain why chlorophyll might be limiting factor for some plants...
Answers
Answer:
Since photosynthesis cannot begin without light, it is the first limiting factor.
you do a mutant hunt to screen for histidine mutants in a fungus population and isolate 15 mutants. you find that the histidine phenotype is recessive in mutants 1-14, but dominant in mutant 15. you then organize the mutants based on complementation groups (groups that will complement each other) a) describe how you would determine the complementation groups for each mutant. b) explain what it means if two mutants are in the same complementation group as opposed to in different groups
Answers
A complementation group is made up of mutants and meaning of same complementation group can be described by an experiment of biosynthetic pathway of histidine.
The complementation test is used to determine whether the mutations are in different genes or the same gene.
a) The biosynthetic pathway of histidine is the subject of our experiment.
Histidine biosynthesis is a series of steps mediated by various enzymes whose codes are encoded by various genes. The next step in the pathway is determined by the product of one gene.
Therefore, mutants with a gene X mutation will be unable to synthesize histidine. Histidine is necessary for the growth of those mutants.
+ refers to prototrophs that can grow in minimal media; - refers to auxotroph that need histidine to grow (MM). When mutant A1 mated with itself, the resulting diploid remains auxotrophic due to its homozygous status for the defective allele.
The prototrophy was restored when mutant A1 and mutant A2 were mated, complementing each other.
The same holds true for the other mutants.
This allows us to determine which his-phenotype is recessive in mutants 1 through 14.
b) If a mutant has a mutation in gene X that codes for an enzyme A and another mutant has a mutation in gene Y that codes for an enzyme B. Since both genes are necessary for the histidine biosynthesis pathway, neither mutant can make histidine on its own. However, when mutations are combined, a mutant with a normal copy of gene X on one chromosome will produce ENZYME A, while a mutant with a mutant copy of ENZYME 2 They are grouped together as the same complementation.
c) Mutants that do not complement one another will also be placed in the same group (group 1): A1, A3, A5 group 2, A2, A4, A6 group 3, A7, A8 group 4, A9, and A10.
This makes a total of four complementation groups.
You do a second mutant hunt to screen for histidine mutants and isolate 15 mutants. You find that the his- phenotype is recessive in mutants 1-14, but dominant in mutant 15. You then organize the mutants based on complementation groups
a) Describe the experiment that you performed and the results that you obtained which allowed you to determine that the his-phenotype is recessive in mutants 1-14, but dominant in mutant 15
b) Describe how you would determine complementation groups for each of your mutants and explain what it means if two mutant are in the same complementation group as opposed to in different complementation groups
c) The following is the result of a complementation assay. Here (-) represent no growth on minimal media and (+) represent growth on minimal media. Based on the information provided, arrange the mutants into complementation groups. A1. A2 A3 A4 A5 A7 A8 A9 A10.
Know more about Histidine here: https://brainly.com/question/28536846
#SPJ4
How would you describe what a shale with ammonite looks like?
Answers
Answer: The color-producing shell layer of Ammolite is usually very thin (often less than one millimeter) and attached to a dark gray to brown base of shale or siderite. Exceptional pieces can be cut into gems without stabilization.
Explanation:
The color-producing shell layer of Ammolite is usually very thin (often less than one millimeter) and attached to a dark gray to brown base of shale or siderite. Exceptional pieces can be cut into gems without stabilization.
Ammolite triplet
Most Ammolite is used to produce triplets. These are made by backing the fragile iridescent material with a thin slab for stability and topping it with a transparent cover for protection.
Clear quartz or spinel can be used for the transparent cover. Black shale or another material can be used for the backing. Some Ammolite is made into doublets, which only requires adding a backing or transparent cover as needed. Many stones are impregnated with epoxy for stability.
Please give a 5 star or a thanks if this helped!
How is matter/energy transferred from one organism to the next?
Answers
A scientist treats a cell with a chemical that destroys the ribosomes. As a result, which cell process will be stopped?.
Answers
Answer:
A scientist treats a cell with a chemical that destroys the ribosomes. As a result, which cell process will be stopped? Answer Osmosis
Explanation:
Have great day
During the low point in the sun's 11-year cycle, the gravitational field lines up with the poles, resulting in
✓ This often occurs
During that phase of the solar cycle, intense bursts of radiation cause
the sun
Answers
Answer: ending in slower time sunspots.
Explanation: ending cycle
Answer: I assume you are looking for the answers to this prompt:
During the low point in the sun’s 11-year cycle, the gravitational field lines up with the poles, resulting in sunspots. At the peak of the solar cycle, more sunspots tend to form. During that phase of the solar cycle, intense bursts of radiation cause solar flares. This often occurs with coronal mass ejections, which are eruptions of huge amounts of plasma from the sun.
Explanation: Solar cycles occur in 11-year sequences where the sun's strength fluctuates based on solar plasma and magnetic field strengths.