Answer:
newton force is the state of gravity force they abstract when they came closer
where do plants get the energy they need for photosynthesis
(A) leaves
(B) the sun
(C) sugars
(D) water
they get their energy from photosynthesis, so the answer would be (B) the sun
What is normalization
Answer:
Normalization is a systematic approach of decomposing tables to eliminate data redundancy. It is a multi-step process that puts data into tabular form, removing duplicated data from the relation tables.
Explanation:
Answer:
the process of bringing or returning something to a normal condition or state.
Explanation:
In "your own words"- Normalization is when you change something back into it's average form.
An elevator held by a single cable is ascending but slowing down. Is the work done by tension positive, negative, or zero? What about the work done by gravity? Explain
Explanation:
1.) Work = Force*Distance
2.) The direction of motion lies in the same direction as the tension in the cable. So the work done by tension would be positive.
3.) The direction of the weight (due to gravity) would act opposite to the direction of motion of the elevator, so work done by gravity becomes negative.
What is the speed of an object that travels 20 meters in 4 seconds?
Given:-
Distance covered by the particle (s) = 20 mTime taken (t) = 4 secondsTo Find: Speed of it.
We know,
v = s/t
where,
v = Speed,s = Distance &t = Time taken.Putting the values,
v = (20 m)/(4 s)
→ v = 5 m/s (Ans.)
The speed of an object will be "5 m/s".
The given values are:
Distance,
d = 20 mTime,
t = 4 secondsAs we know, the formula:
→ [tex]Distance (d)= Speed (v)\times Time (t)[/tex]
or,
→ [tex]Speed (v) = \frac{Distance (d)}{Time (t)}[/tex]
By putting the values, we get
→ [tex]= \frac{20}{4}[/tex]
→ [tex]= 5 \ m/s[/tex]
Thus the above answer is correct.
Learn more:
https://brainly.com/question/18660562
A car travels 82 meters do North and 14 seconds the car turns around and travels 44 m due south in four seconds what is the magnitude of the average velocity of the car during the full travel time?
Answer:
2.11 m/s
Explanation:
Take north to be positive and south to be negative.
Average velocity = displacement / time
v = (82 m + -44 m) / (14 s + 4 s)
v = 2.11 m/s
The velocity is positive, so it is 2.11 m/s north. The magnitude of the velocity is 2.11 m/s.
what type of organism does not use photosynthesis
(a) plants
(b) bacteria
(c) algae
(d) humans
Answer:
D) Humans
Explanation:
Photosynthesis is a useless ability without some way of exposing yourself to as much of the Sun's energy as possible. That requires a large surface area, relative to their volume. Plants achieve that with large, horizontal, light-capturing surfaces – leaves.
1. Looking at the planet vs. eccentricity table, which two planets have the greatest eccentricity?
Answer:
Pluto & Mercury
Explanation:
Pluto's eccentricity is 0.248
Mercury's eccentricity is 0.206
How fast do you go if you move 80 meters in 0.20 seconds?
Answer: I HOPE IT HELPS
Use this Speed Calculator to calculate the speed you have travelled based ... (so add three 0s to your kilometres to get metres) and a mile is 1609 metres. ... You will have distance per time such as kilometres per hour or metres per second. ... If you want help with that, click on hyperlink for metres or for minutes and seconds.
Explanation:
I need with the basic understanding of this
Answer:
A = air resistance
B = lift
C = thrust
D = gravity
1.00 N, 2.86° above horizontal
Explanation:
Gravity pulls down on the bird. The thrust of the birds wings push it forward, and the lift pushes it up. Air resistance pushes it back.
The net force in the y direction is:
∑Fᵧ = lift − gravity
∑Fᵧ = 0.20 N − 0.15 N
∑Fᵧ = 0.05 N
The net force in the x direction is:
∑Fₓ = thrust − air resistance
∑Fₓ = 1.50 N − 0.50 N
∑Fₓ = 1.00 N
The magnitude of the resultant force is:
F² = Fₓ² + Fᵧ²
F² = (1.00 N)² + (0.05 N)²
F ≈ 1.00 N
The direction of the resultant force is:
tan θ = Fᵧ / Fₓ
tan θ = (0.05 N) / (1.00 N)
θ = 2.86° above horizontal
Which of these is caused by the interaction between the atmosphere and the hydrosphere?
Answer:
Explanation: All the spheres interact with other spheres. For example, rain (hydrosphere) falls from clouds in the atmosphere to the lithosphere and forms streams and rivers that provide drinking water for wildlife and humans as well as water for plant growth (biosphere).
Oppositely charged parallel plates are separated by 4.49 mm. A potential difference of 600 V exists between the plates. (a) What is the magnitude of the electric field between the plates? N/C (b) What is the magnitude of the force on an electron between the plates? N (c) How much work must be done on the electron to move it to the negative plate if it is initially positioned 3.14 mm from the positive plate?
Answer:
A. Using
E=V/d
= 600/4.49*10^-3
= 1.336 x10^5 N/C
b) F = E*q = 1.33610^5 x 1.6*10^-19
= 2.17 x 10^-14 N
c) Work = Fs distance = 2.17 x 10^-14 N (4.49-3.14)*.001= 1.35 x 10^-17 J
The overall length of a piccolo is 30.0 cm. The resonating air column is open at both ends. (a) Find the frequency of the lowest note a piccolo can sound. (Assume that the speed of sound in air is 343 m/s.) Hz (b) Opening holes in the side of a piccolo effectively shortens the length of the resonant column. Assume the highest note a piccolo can sound is 3 000 Hz. Find the distance between adjacent antinodes for this mode of vibration.
Answer:
(a) the frequency of the lowest note the piccolo can sound is 571.7 Hz
(b) the distance between adjacent antinodes is 5.72 cm
Explanation:
(a)
Given;
length of piccolo, L = 30 cm = 0.3 m
the speed of sound in air is 343 m/s
The wavelength of a pipe open at both ends, for the first harmonic is given;
L = A → N + N → A
L = λ / 4 + λ / 4
L = λ / 2
λ = 2L
λ = 2 x 0.3 = 0.6 m
The fundamental frequency (lowest frequency) is given by;
f₀ = v / λ
f₀ = (343 / 0.6)
f₀ = 571.7 Hz
(b)
Given;
highest note, f = 3000 Hz
the distance between adjacent antinodes is given by;
[tex]d = \frac{v}{2f}\\\\ d = \frac{343}{2*3000}\\\\ d = 0.0572 \ m\\\\d = 5.72 \ cm[/tex]
5. Why does a properly adjusted head restraint help prevent head and neck injuries to occupants in
rear-end collisions? Explain your answer in terms of the law of conservation of momentum.
Answer:
Have you tried google
Explanation:
Answer:
protect against whisplasg injuries
The Shinkansen (bullet train in Japan) makes a trip from Tokyo Station to Kyoto station in 2 hours and 14 min. The distance traveled is 460 km (to two significant figures). Determine the average velocity of the train in meters per second (m/s). [conversions: 1 km = 1000 m, 1 hr = 60 min, 1 min = 60 s] *
Answer:
v = 57.2 m/s
Explanation:
The average velocity of the train can be defined as the total distance covered by the train divided by the time taken by the train to cover that distance. Therefore, we will use the following formula to find the average velocity of the train:
v = s/t
where,
s = distance covered = 460 km = (460 km)(1000 m/1 km) = 4.6 x 10⁵ m
t = time taken to cover the distance = 2 h 14 min
Now, we convert it into minutes:
t = (2 h)(60 min/1 h) + 14 min
t = 120 min + 14 min = (134 min)(60 s/1 min)
t = 8040 s
Therefore, the value of velocity will be:
v = (4.6 x 10⁵ m)/8040 s
v = 57.2 m/s
ball is thrown vertically upward from an initial position 5m above the ground. At the same time, a cube is released from rest down aslippery incline, from an unknownheight. The two objects reach the ground at the same instant, and both have a final speed of 15m/s. What is the angle ofthe incline
Answer:
The value is [tex]\theta = 34.8 ^o[/tex]
Explanation:
Generally the time it takes the ball to move from maximum height to the ground is
[tex]t = \frac{v - u}{g}[/tex]
Here u= 0 m/s and v = 15 m/s
So
[tex]t = \frac{15 - 0}{9.8}[/tex]
=> [tex]t = 1.53 \ s [/tex]
Generally the maximum height traveled in time t is mathematically represented as
[tex]s = u * t + \frac{1}{2} * g * t^2[/tex]
=> [tex]s = 0 * 1.53 + \frac{1}{2} * 9.8 * 1.53^2[/tex]
=> [tex]s = 11.5 \ m [/tex]
The interval in distance between the maximum height and the initial position of the ball is
[tex]d = s - k[/tex]
Here k = 5 m (given)
[tex]d = 11.5 - 5[/tex]
[tex]d = 6.5 \ m [/tex]
Generally from the kinematic equation we have that
[tex]d = ut_1 + \frac{1}{2} g * t_1 ^2[/tex]
Here [tex] t_1 [/tex] is the time taken to travel through d
[tex]t_1 = \sqrt{ \frac{2 * d }{g} }[/tex]
=> [tex]t_1 = \sqrt{ \frac{2 * 6.5 }{9.8} }[/tex]
=> [tex]t_1 = 1.15 \ s [/tex]
Generally the total time for this fight is mathematically represented as
[tex]t_f = t + t_1[/tex]
=> [tex]t_f = 1.15 + 1.53[/tex]
=> [tex]t_f = 2.68 \ s [/tex]
Generally the vertical force exerted on the cube is mathematically represented as
[tex]F = m * g * sin (\theta )[/tex]
=> [tex] m * a = m * g * sin (\theta )[/tex]
=> [tex] a = g * sin (\theta )[/tex]
Now a is mathematically represented as
[tex]a = \frac{v - u }{t_f}[/tex]
=> [tex]a = \frac{15 - u }{2.68}[/tex]
=> [tex]a = 5.597 \ m/s^2[/tex]
So
[tex] 5.597 = 9.8 * sin (\theta )[/tex]
[tex]\theta = sin^{-1} [\frac{5.597}{9.8} ][/tex]
[tex]\theta = 34.8 ^o[/tex]
A cyclist accelerates from rest to 8 m/s in 3 seconds. How far did the cycles travel in 3 seconds?
Answer:
[tex] \boxed{\sf Distance \ travelled = 12 \ m} [/tex]
Given:
Initial speed (u) = 0 m/s (Accelerates from rest)
Final speed (v) = 8 m/s
Time taken (t) = 3 seconds
To Find:
Distance travelled by cyclist (s)
Explanation:
From equation of motion of object moving with uniform acceleration in straight line we have:
[tex] \boxed{ \bold{s = (\frac{v + u}{2} )t}}[/tex]
By substituting value of v, u & t in the equation we get:
[tex] \sf \implies s = ( \frac{8 + 0}{2} ) \times 3 \\ \\ \sf \implies s = \frac{8}{2} \times 3 \\ \\ \sf \implies s = 4 \times 3 \\ \\ \sf \implies s = 12 \: m[/tex]
[tex] \therefore[/tex]
Distance travelled by cyclist (s) = 12 m
Answer:
s(distance) =36m
Explanation:
u(initial velocity) =0 m/s
a =8 m/s^2
t=3s
s=ut+1/2at^2
s=1/2(8)(3)^2
s=1/2(8)(3)(3)
s=4(9)
s=36m
An automobile is driven on a straight road, and the distance traveled by the automobile after time t=0 is given by a quadratic function a where a(t) is measured in feet and t is measured in seconds for 0 <= t <= 12. Of the following, which gives the best estimate of the velocity of the automobile, in feet per second, at time t = 8 seconds?
a. s(8)
b. s(8)/8
c. s(12)- s(2)/ 12-2
d. s(9)- s(7)/9-7
Answer:
[tex]Velocity = \frac{s(8)}{8}[/tex]
Explanation:
Given
[tex]0 \leq t \leq 12[/tex]
Required
Determine the velocity when t = 8
This type of velocity is referred to as an instantaneous velocity.
In this case, it is calculated using
[tex]Velocity = \frac{Distance\ at\ 8 second}{t = 8}[/tex]
Given that s(t) models the distance;
s(8) = distance at 8 seconds
So;
[tex]Velocity = \frac{s(8)}{8}[/tex]
Option B answers the question
The group that receives treatment is called the?
Tested Group
Control Group
Placebo Group
Experimental Group
Answer:
experimental group
Explanation:
please mark me as a brainlist..
Answer:
Experemtial group
Explanation:
The placebo is just sugar pills tested is ones already done and control is a mix of the two
What is a statement ?
Consider the displacement vectors Ā=(i +6j)m, B = (3i– 7j)m,
If A-B-4D=0, what are the components of D? (Dx = ?, and Dy = ?)
Answer:
Dx = -0.5
Dy = -0.25
Explanation:
Two vectors are given in rectangular components form as follows:
A = i + 6j
B = 3i - 7j
It is also given that:
A - B - 4D = 0
so, we solve this to find D vector:
(i + 6j) - (3i - 7j) - 4D = 0
- 2i - j = 4D
D = - (2/4)i - (1/4)j
D = - (1/2)i - (1/4)j
D = - 0.5i - 0.25j
Therefore,
Dx = -0.5
Dy = -0.25
what role do control groups play
Answer:
Control groups let the one who is expermenting compare the effect of the varibles in the expermental group.
Explanation:
The position of a particle
Answer:
vector
Explanation:
The position of a particle is vector
Which is a benefit of using synthetic polymers, such as nylon?
Synthetic polymers are lightweight.
O Synthetic polymers are produced in small
quantities.
Synthetic polymers are biodegradable.
Synthetic polymers are inexpensive to recycle.
Answer: Synthetic polymers are lightweight.
Explanation:
A benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.
A polymer is a molecule composed of many repeating subunits.
Synthetic polymers are artificial polymers created by humans.
Most of the synthetic polymers are not biodegradable (unlike natural fibers such as cotton).
Synthetic polymers are classified according to their use into plastics, elastomers and synthetic fibers.
The advantages of synthetic polymers include: hard to break, being lightweight, and they last for a long time.
In conclusion, a benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.
Learn more in:
https://brainly.com/question/4047007?referrer=searchResults
Which has the fastest wave speed, a high frequency sound or a low frequency sound?
Answer:
high frequent sound
Explanation:
because if its low than its slower.
What are some reasons people may not prepare to be safe and comfortable when they participate in physical activity?
Answer: ummm arent you in my physical fundations class lol
Explanation:
are you or am i tripping? and sorry i dont have the answer :(
Common reasons people give for not being active include not having enough time, finding physical activity inconvenient, lacking self-motivation, etc.
What is physical activity?Any consensual bodily mobilization generated by skeletal muscles that necessitate caloric expenditure is characterized as physical activity.
Physical activity includes all activities of any frequency, at any moment of day or night. It incorporates both strength training and incidental activity into the daily routine.
Physical activity can improve your brain health, help you manage your weight, lower your risk of disease, strengthen your bones and muscles, and improve your ability to do everyday tasks.
Adults who sit less and engage in moderate-to-vigorous physical activity reap health benefits.
Internal barriers were classified into three types namely, a lack of energy, a lack of motivation, and a lack of self-efficacy.
External barriers were also classified into three categories namely a lack of resources, a lack of social support, and a lack of time.
Thus, these are some reasons that may not prepare to be safe and comfortable when they participate in physical activity
For more details regarding physical activity, visit:
https://brainly.com/question/14338730
#SPJ2
the graph shows position versus time for an object moving with the constant acceleration. what is the final velocity of the object at t=10s? assume the initial velocity at the origin is 1 m/s.
3.32 m/s
4.0 m/s
3.0 m/s
3.8 m/s
Answer:
3.0 m/s
Explanation:
The equation of motion for constant acceleration (a) is ...
[tex]x(t)=\dfrac{1}{2}at^2 +v_0t+x_0[/tex]
The problem statement tells us v₀ = 1, and we read from the graph that x₀=1. We also read from the graph that x(10) = 21. Filling these values into the equation, we can find a and x'(10).
[tex]21 = \dfrac{1}{2}a(10^2)+1(10)+1\\\\10=50a\qquad\text{subtract 11}\\\\a=\dfrac{1}{5}\\\\x'(t)=at+v_0\\\\x'(10)=\dfrac{1}{5}\cdot 10+1=3.0[/tex]
The final velocity of the object at t=10 s is about 3.0 m/s.
_____
Comment on the graph
We note this graph better represents increasing acceleration than it does constant acceleration. x(2) = 3.4 per the equation. It is graphed as about 4.
Answer:
thanks for de points
Explanation:
Convert 2536 mm/min to m/s. Use dimensional analysis.
Answer:
As we know that,
1 mm/min = 1.66667E-5 m/s1 m/s = 60000 mm/minNow, come to the question -
[tex] \\ \implies \sf \: 2536 \times 1.66667E-5 m/s \\ \\ \\ \implies \sf \blue{0.0422666667 \:m/s } \\ [/tex]
Result : 2536 mm/min = 0.0422666667 m/s.
The mass of a string is 20 g and it has a length of 3.2 m. Assuming that the tension in the string is 2.5 N, what will be the wavelength of a travelling wave that is created by a sinusoidal excitation of this string with a frequency of 20 Hz. Provide the wavelength in units of m. Please note: You do not include the units in your answer. Just write in the number.
Answer:
The wavelength of the wave is 1 m
Explanation:
Given;
mass of the string, m = 20 g = 0.02 kg
length of the string, L = 3.2 m
tension on the string, T = 2.5 N
the frequency of the wave, f = 20 Hz
The velocity of the wave is given by;
[tex]v = \sqrt\frac{T}{\mu} {}[/tex]
where;
μ is mass per unit length = 0.02 kg / 3.2 m
μ = 6.25 x 10⁻³ kg/m
[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]
The wavelength of the wave is given by;
λ = v / f
λ = (20 m/s )/ (20 Hz)
λ = 1 m
Therefore, the wavelength of the wave is 1 m
A car travels 20 meters east
in 1.0 second and then travels
10 meters west in 20 seconds. The
displacement of the car at the end
of this 3.0-second interval is-
Answer:
Alright the other day.
One of the specific goals of of environmental analysis is:____________
a: To provide organized information, for the development of the organization's internal analysis, mission, vision , values and strategy.
b: To measure organizational efficiency.
c: To ignore minor competitors.
d: To develop a list of "one-word: descriptions of the external environment.
Answer:
a: To provide organized information, for the development of the organization's internal analysis, mission, vision, values, and strategy.
Explanation:
Environmental analysis is a process in business wherein the internal and external factors that can affect a business are examined so as to help improve the organization's goals and strategies. The internal analysis serves as a guide to checkmate the organization and to see if they have adopted the right strategies that suit their external environment.
Competitors in the external environment can have a huge impact on the business. So the internal workings of the organization should align with the external factors. The organized information would also be useful in forecasting the growth of the business.