From acetic acid how to get formic acid ?
Answer:
The Reaction of acetic acid withNaN3 gives out methylamine. rxn of methylamine to HNO2 to give out methanol. oxidation of methanol via Kcr207(H+) to give formic acid.
Can someone answer 3’for me please?
A lidded glass container is filled with a colored gas. After a period of time, it is observed that the gas is uniformly spread throughout the box and that the movement has slowed considerably. Next, a warm iron plate is carefully placed under the box. Why is there resumed movement of the gas in the container?
A) The warm iron plate absorbed energy from the gas particles, making them move faster.
B) The warm iron plate vibrated due to the energy it had, disturbing the gas in the process.
C) Heat from the warm iron plate transferred energy to the gas particles, making them move faster.
D) The warm iron plate heated the insulated box causing it to vibrate, disturbing the gas in the process.
Answer:
It's not A, it's likely not C? I'm guessing B or D.
The list identifies various properties of four elements:
Element 1 is a gas at room temperature.
Element 2 is a solid which conducts electricity.
Element 3 is a gas with an effective nuclear charge of +7.
Element 4 is malleable and can take the form of a shiny solid sheet.
Based on this list, which elements are metals?
A. Elements 1 and 3
B. Elements 1 and 4
C. Elements 2 and 3
D. Elements 2 and 4
Answer: D
Explanation: I guessed it and got it right
A fundamental object that is difficult to divide into smaller bits is known as an element. Therefore option D is correct.
What is element ?An element is a species of atoms, including the pure material made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical process into simpler molecules.
An element is a material that cannot be broken down by non-nuclear processes in chemistry and physics. A discrete component of a larger system or collection is referred to as an element in computers and mathematics.
Metals, nonmetals, and metalloids are the Periodic Table's three main groupings. Each group's constituent elements share comparable physical and chemical characteristics. Among the physical characteristics used to separate the three groups are, A substance's capacity to reflect light is referred to as luster.
Thus, option D is correct.
To learn more about element follow the link below;
https://brainly.com/question/13025901
#SPJ2
A 12.0% sucrose solution by mass has a density of 1.05 gem, what mass of sucrose is present in a 32.0-mL sample of this solution?
A) 0.126g
B) 3.66g
C) 4.03g
D) 3.84g
E) 280 g
Answer:
Option C. 4.03 g
Explanation:
Firstly we analyse data.
12 % by mass, is a sort of concentration. It indicates that in 100 g of SOLUTION, we have 12 g of SOLUTE.
Density is the data that indicates grams of solution in volume of solution.
We need to determine, the volume of solution for the concentration
Density = mass / volume
1.05 g/mL = 100 g / volume
Volume = 100 g / 1.05 g/mL → 95.24 mL
Therefore our 12 g of solute are contained in 95.24 mL
Let's finish this by a rule of three.
95.24 mL contain 12 g of sucrose
Our sample of 32 mL may contain ( 32 . 12) / 95.24 = 4.03 g
How many moles are in the 100,000g of CuSO4 • 5H2O ?
Answer:
try (107.87 amu)
Explanation:
Which is an example of a compound? * He3 or H2O or C
Answer:
H2O
Explanation:
There is more than one element
Write the net ionic equation for Potassium chloride + sodium nitrate
I believe the answer is this:
KCl + NaNO3 --> KNO3 + NaCl.
Answer:
No reaction
Explanation:
KCl + NaNO3 --> KNO3 + NaCl
Since these substances are all aqueous (no precipitates or other phases involved), if you were to write the ionic equation and cross out spectators, they'd all cancel so there is no reaction.
Calculate the molar mass of Ga(NO3)3
255.732 g/mol
159.738 g/mol
227.718 g/mol
131.727 g/mol
Answer:
255.732 g/mol
Explanation:
Molar mass of Ga(NO3)3 = 255.7322 g/mol. This compound is also known as Gallium(III) Nitrate.
Which model of the solar system is shown here?
Answer: C
Explanation: hope this helps
The model of the solar system that is shown here is:
C. Geometric model
Model for description of earth and other entites
Geometric model:In astronomy, the geocentric model is a superseded description of the Universe with Earth at the center. Under the geocentric model, the Sun, Moon, stars, and planets all orbit Earth.
Characteristics:
the Earth is the focal point of the universe and it is fixed,the planets, the Sun, and the stars spin around the Earth,the circle and the circle are "awesome" shapes, so all movements overhead ought to follow roundabout ways, which can be credited to objects being appended to circular shells.Thus, option C is correct.
Find more information about Solar system here:
brainly.com/question/1286910
How many atoms are in 2.37 moles of Krypton
Answer:
1.43 × 10²⁴ atoms Kr
General Formulas and Concepts:
Chemistry - Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
2.37 mol Kr
Step 2: Convert
[tex]2.37 \ mol \ Kr(\frac{6.022 \cdot 10^{23} \ atoms \ Kr}{1 \ mol \ Kr} )[/tex] = 1.42721 × 10²⁴ atoms Kr
Step 3: Check
We are given 3 sig figs. Follow sig fig rules and round.
1.42721 × 10²⁴ atoms Kr ≈ 1.43 × 10²⁴ atoms Kr
Which scenario is likely to result in the most diverse offspring?
1 point
Sexual reproduction between two individuals from different continents
Sexual reproduction between two individuals in the same population
Asexual reproduction by binary fission
Asexual reproduction by budding
Answer: i think it is binary fission
Explanation:
The only sure evidence for a chemical reaction is
Answer:
that one or more new substances are produced. Temperature Changes Chemical reactions can release energy or absorb energy.
Explanation: .
I need help ASAP pls
Answer:
1.40.078 u
2.26.981539 u
3.207.2 u
4.56
5.53.9396147 u
6.1.00784 u
Explanation: your welcome
During homogeneous catalysis, if a catalyst is present in the liquid phase, which phase must the reactants be in?
Answer:
The reactants must be in the liquid phase.
Explanation:
Homogeneous means that something is of the same nature.
In the context of catalysis, it means that the catalyst and the reactants are in the same phase.
If the catalyst is in the solid phase, the reactants are solids are well.
If the catalyst is in the liquid phase, then the reactants are also in the liquid phase.
And so on.
Suppose you used 0.5 M NaOH to titrate your vinegar sample instead of 0.1 M. What effect does the concentration of base added have on the reliability of the results of your titration?
Answer: the reliability will be worse
Explanation:
Suppose we used 0.5 M NaOH to titrate our vinegar sample instead of 0.1 M.
Now by using 0.5M instead of 0.1M we are increasing the concentration of NaOH,
We know that the moles used = Volume x concnetration.
so for the same no of moles, if the concentration increases, the volume decreases.
Hence it will consume less NaOH.
now Since the volume decreases, the titration volume of less number will increase the % error.
Therefore the reliability will be worse.
The effect that the concentration of the added base has on the reliability of the results of the titration in question is; The reliability will be worse.
We are told that;
0.5 M NaOH is to be used to titrate a vinegar sample instead of 0.1 M.
Now, 0.5 M means a concentration of 0.5 and since it is higher than 0.1M, it means the concentration of NaOH will increase.
Formula for number of moles used is;
n = V × M
Where;
n is number of moles
V is volume
M is concentration
We can see that number of moles is directly proportional to the volume and concentration.
Thus, if the number of moles remains unchanged, as we have increased the concentration, it means that the volume will decrease.
Thus, lesser volume of NaOH will be used and as a result of this decrease in volume, there will be a greater possibility of error.
In conclusion, we can say that the reliability will be worse.
Read more at;https://brainly.com/question/22702792
How many atoms of carbon are present in the products?
6CO2+6H2O=C6H12O6+6O2
Answer:
2.41 * 10^24 atoms of carbon present in the products.
Explanation:
First, we need to find the moles of carbon in the products in order to find the number of atoms.
We see that in the chemical formula, carbon belongs to the compound known as glucose. To get the amount of moles of carbon, we need to divide my the amount of carbon within glucose (in grams) from the total amu ( or grams) of glucose to get the moles.
C6 = 72.066.
C6H12O6 = 180.156
72.066/180.156 = 0.4000199827 moles of Carbon within the Glucose compound
Now we will convert to atoms/molecules by multiplying the moles by avogadro's number..
0.4000199827 moles C * 6.022*[tex]10^{23}[/tex] = 2.408920336 *[tex]10^{24}[/tex] atoms of Carbon present in the products
*Note --> this can be estimated to 2.41 * [tex]10^{24}[/tex] atoms of Carbon
A metal is found that has a mass of 27g and will displace 6mL of water. Calculate its density and identify the metal.
The density of metal = 4.5 g/ml, and the metal = Titanium
Further explanationDensity is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
mass of metal=27 g
volume = 6 ml
The density :
[tex]\tt \rho=\dfrac{27}{6}\\\\\rho=4.5~g/ml[/tex]
The metal with a density of 4.5 g/ml is Titanium
How many moles of water will be produced from the combustion of 0.27 moles of CH3OH?
Answer:
0.54 mole of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2CH3OH + 3O2 —> 2CO2 + 4H2O
From the balanced equation above,
2 moles of CH3OH reacted to produce 4 moles of water.
Finally, we shall determine the number of mole of water (H2O) produced by the reaction of 0.27 moles of CH3OH. This can be obtained as follow:
From the balanced equation above,
2 moles of CH3OH reacted to produce 4 moles of water.
Therefore, 0.27 moles of CH3OH will react to produce = (0.27 × 4)/2 = 0.54 mole of H2O.
Thus, 0.54 mole of H2O is produced from the reaction.
c. What might have happened in Kush and Egypt if Kush had developed iron
weapons?
Answer:
Kush would have been able to fight better and probably would have never been invaded by Egypt, and they could have beaten the Assyrians when they tried to takeover Egypt. And the 25th dynasty would have continued.
Explanation:
that is my explanation and answer^
In a carbon dioxide molecule, a double covalent bond forms when the carbon atom shares what
pairs of valence electrons with each oxygen atom.
Answer:
2 pair of an electron
Explanation:
carbon having 6 valence electron 2 electron involved in covalent bonding so 4 electron means 2 pairs of an electron will left.
Volume and mass examples
Answer: Example: A bowling ball and a basketball are about the same volume as each other, but the bowling ball has much more mass
Explanation: Mass and volume are two units used to measure objects. Mass is the amount of matter an object contains, while volume is how much space it takes up.
for the following equation to be bal
Answer:
What's the rest of the question
Explanation:
Which is stronger, the strong force (SF) or the electromagnetic force (EMF)? Describe how they battle each other in the nucleus. What would happen if their strengths were reversed?
Answer:uclear Force that holds together the nucleus of an atom. electromagnetic force. ... They are unstable because the Strong Force that would hold them together if the protons and neutrons were closer is weakened because the protons and neutrons get too far apart.
Explanation:
Which of the following is not a required characteristic for a living organism?
A) reproduction
B) mobility
C) homeostasis
D) adaptation
Answer:
B
Explanation:
living things are not required to move
Question 8 (3 points) What is the formula for Silver (III) sulfide? O Ag2(SO4)3 O Ag3(SO4)2 Ag3S2 Ag2S3
The formula of Silver (III) Sulfide is Ag2S3.
Hope this helps. Please mark brainliest!
Please answer. Thank you
Answer:
Explanation:
what are tho anwser choices
Middle school science help please. ill give brainliest
Answer:
It converts The liquid into a gas at the same temperature.
Explanation:
Answer:
it converts the liquid into gas at the same temperature
Explanation:
when heat is added to a liquid at boiling temperature it converts the liquid into gas at that same boiling temperature
please give brainliest
VERY EASY QUESTION
Does a theory help prove an experience or an experience help prove a theory?
Answer:both
Explanation:
It depends on where your looking at it from
Answer:
an expierience help prove a theory.
PLEASE HELP I WILL GIVE BRAINLIEST!!!!!
What is a main difference between a mixture and a pure substance?
OAmixture is only a liquid, but a pure substance can be in any state.
OAmixture looks the same throughout, but a pure substance does not.
OAmixture can vary in composition, but a pure substance has a set composition.
O Amixture can be made up of a single compound, but a pure substance cannot
Answer:
I think the answer is c!
Explanation:
Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule. hope this helps you!