If you hit an unoccupied vehicle and cannot find the owner, you should Choose an answer: A. Leave the scene and repair your own vehicle. Wait for the other owner�'s insurance company to contact you. B. Leave the scene and wait for the police to contact you. C. Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency.
Answer:
Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency.
Explanation:
Also notify your insurance company of the incident - telephone should also be included on the note
The answer to the question is C "Leave a note with your name, address, and registration number in an easily seen place on the vehicle, and report the crash to the proper law enforcement agency"
Option A is incorrect. The person should not leave the scene and repair his or her own vehicle alone. The person should take responsibility for the damage caused.
Option B is incorrect. Leaving the scene and waiting for the contact from the police is not appropriate.
Option C is the correct answer. The person should leave a note with their name, address, and registration number and then report the crash to the proper law enforcement agency.
Read more on:
https://brainly.com/question/14328441
What are the five basic elements of a system?
Answer:
input unit
out put unit
central processing(CPU)
arthimetic and logic unit(ALU)
Explanation:
SAME IN ANSWER IN ANSWER IT'S SELF I EXPLAINED.i hope it helps u.asking question is good for learning
WHO IS SUPER COOL PLEASE RESPOND FOR 48 PTS
You're super cool!
We all are!
If you wanted to conduct an experiment to determine the temperature at which milk freezes compared to other liquids, such as water or juice, explain the steps you would need to make it a fair test
If your license was issued in error, it may be ____.
A. suspended
B. cancelled
C. terminated
D. revoked
Answer:
B. Cancelled
Explanation:
Got it right on Drivers Ed!
Answer:
B. Cancelled
Explanation:
1. Which of the following is an engineering function in which an engineer takes new ideas for
products or processes and gets them ready for production?
O consulting
O development
O research
O analysis
Answer: development
Explanation:
A wall charger for a mobile device has a sticker label showing that it operates at 5V with 1A output. Which shows the correct formula to calculate power (P) in watts from the given values?
Answer:
I believe its B I just did something exactly like this if im wrong I am so sorry
Explanation:
Which description is that of a vertical stroke?
The vertical stroke as a sign is often used with sound-meaning signs to indicate their status as ideograms
I'm not sure if its true
Answer:
the answer is true. your welcome.
what's a green stadium?
The component of a fluid system where a fluid is stored, but not under pressure, is called a container.
True
False
Answer:
The answer is true
please friend me thank you bye.
Explanation:
Answer:
trueeeeeeeeeeeeeee
Explanation:
By conducting a survey, Sarah and Jesse determine that an “open space” is home to over fifty different species of plant life.
True or false
Explain the term sustainability and discuss how it relates to sustainable design.
Answer:
Explanation:
Sustainable Design Sustainable design seeks to reduce negative impacts on the environment, and the health and comfort of building occupants, thereby improving building performance. The basic objectives of sustainability are to reduce consumption of non-renewable resources, minimize waste, and create healthy, productive environments.
Dry clean-up procedures are used to clean up
A
fats, oils, and grease
B
waste water
с
broken glass
D
hazardous materials
Answer: The answer is A
Explanation:
___ are NOT considered road users?
A. Road maintenance crews
B. Gas station employees
C. Traffic police
D. Construction workers
Gas station employees are not considered road users. The correct option is B.
Who are Gas station employees?An employee at a full-service filling station who does labor other than taking money is referred to as a filling station attendant or gas station attendant (also known as a gas jockey in the US and Canada).
At a full-service gas station, a gas jockey, also known as a gas station attendant, offers customer care. They must greet clients, pump the necessary amount of fuel, clean windows, check fluid levels, and tire pressure, and process payments, among other things.
They are not road users. Furthermore, they just work in the gas stations in particular areas. All others work for roads.
Therefore, the correct option is B. Gas station employees.
To learn more about Gas station employees, refer to the link:
https://brainly.com/question/16823242
#SPJ2
Can anyone help??? This was due yesterday??? This is welding!
If the questions aren't clear then here they are.
1.) The step motion (we call it the stitch motion), is used with what type of welding electrodes?
2.) What type of penetration is gained by using the step motion technique?
3.) A vertical weld can be made in which directions?
4.) Which vertical technique is the easiest to perform?
5.) What technique or motion is used when welding in the horizontal position?
6.) 6013 electrodes were designed to weld; what material, in what polarity, while traveling in what direction?
7.) What is the recommended amperage to be used when welding a ⅛” 6013 electrode in AC?
8.) If you make a small weld, what can be done to correct this problem according to the video?
9.) What solidifies first when welding with 7018, the poodle or the flux?
10.) What is porosity?
11.) What can cause porosity?
12.) When using a ⅛” 7018 electrode in DC+, when is the suggested amperage?
Answer:
1.
2.black box
3. Weld left to right or right to left, make sure the contact tip is within ⅜” of the work when welding, meaning that there should never be more than ⅜” of wire “sticking out”, tilt the handle to about 75 degrees.
4. Vertical jump technique
5. For the horizontal position welding technique, you need to point the MIG gun upward in an angle between 35-45 degrees and tilted at an angle between 15-35 degrees towards the weld position.
6. The 6013 electrodes can be used with AC or DC (either straight or reverse polarity) in any position. It can weld mild steel to medium steel. However, there are some positive and negative reviews about the E6013. It has a thicker coating, for example, that does not spatter.
7.
8.
9.7018 Welding Rod Meanings And its Amperage Settings, Applications & Features
10. Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%.
11. Porosity is caused by the absorption of nitrogen, oxygen and hydrogen in the molten weld pool which is then released on solidification to become trapped in the weld metal.
12. When using a 3/32-inch diameter rod is that you will need to use 50 amps on 1/16-inch steel thickness and around 90 amps on the ⅛-inch thickness of steel. You will need to set the amps much higher for the bigger rods. For 5/32-inch diameter rod, you can set the current at 120 amps for welding the 1/4-inch steel.
Explanation: sorry for the one i skip i did not know it.
bruh is said you need you to watch a video to answer this question/
Electrical Engineering dates back to which century?
Using a telescope to determine the different particles in the rings of Saturn represents which step in the scientific process?
A.)conduct an experiment
B.)conduct basic research
C.)ask a question
D.)conduct applied research
HELPP PLS WHATS 1+1 :)
Answer:
it should be two(Hard question though)
Didn't use google
Explanation:
what is the most embarrassing thing that has happened to you its OK no judging
Answer:
Kuroo Here!
Explanation:
Me accidently yelling bad words( I was wearing airpods with loud music)
I will Brainlist
"Burning and Inch". Describe this measurement.
Answer:
what measurement
Explanation:
Answer:
You measured from the 1" mark (“burning” the first inch), then forgot to add an inch when marking.
Explanation:
Another way to say it is "Burn an Inch."
Who does the narrator blame for the loss of her job as editor-in-chief?
see if i care readworks
Answer:
The Narrator blamed Maxwells for the loss of her job.
Explanation:
hope im not late
Look at the data set below.
{6, 7, 12, 5, 7, 11, 10, 7, 6}
In this data set, what is the mode?
6
7
10
12
Answer:
the mode is 7
Explanation:
the mode is the most frequent number.
6- 2 times
7- 3 times
12- 1 time
5- 1 time
11- 1 time
10- 1 time
the mode is 7 since it was shown 3 times.
hope this helps :)
When welding, the welder holds which of the following?
A Electrode
B Electrode lead
C Electrode holder
D Workpiece connection
The extent to which gravity exerts force on an object is known as ______. [multiple choice] velocity, mass, volume or weight
Answer:
I believe the correct answer would be Weight.
Weight is a force that gravity exerts on an object.
Hope this helped :))))
6. What length of blade will fit a 14 in. band saw if the distance
between wheel centers is 24 in.? Make your calculations in the space
provided. Round your answer to the nearest full inch. Convert the
rounded inch length to millimeters and round to the nearest full unit.
Answer:
355.6in
Explanation:
Engineering Questions
1. Define Engineering.
2. Identify and describe the types of knowledge used by engineers.
3. List roles that make an engineering team.
4. List several engineering disciplines.
5. Summarize the historical developments in engineering.
When your driver license is _____, you will be prohibited from driving for a specified length of time.
A. denied
B. suspended
C. revoked
D. canceled
Answer:
B. suspended
Explanation:
Suspend means to temporarily prevent from continuing or being in force or effect.
When your driver license is suspended, you will be prohibited from driving for a specified length of time. B. suspended
What is driver's license?A driver's license, also known as a driving license, is an official document issued by a government authority that permits an individual to operate a motor vehicle on public roads. It serves as legal proof that the person holding it has met the necessary requirements and has been authorized to drive specific types of vehicles, such as cars, motorcycles, trucks, or buses.
Having a valid driver's license is essential for legal and safe driving on public roads. It ensures that drivers have demonstrated the necessary knowledge and skills to operate a vehicle responsibly and in compliance with traffic laws and regulations.
Option B is the correct answer.
Learn more about driver's license on https://brainly.com/question/18611420
#SPJ2
How can we confirm that a sketch is fully constrained? *
( In AutoDesk Inventor)
✅On the ribbon, click Sketch tab Constrain panel Automatic Dimensions and Constraints . The Auto Dimension dialog box shows the number of dimensions and constraints required to fully constrain the sketch✅
IamSugarBee
The refinement of a fuel additive to improve gas mileage represents which step in the engineering design process?
A.)modify a prototype
B.)conduct applied research
C.)state a problem
D.)conduct basic research
Answer:
I believe the answer is modifying a prototype.
Explanation: