NaOH destroys living tissue quite well since it reacts readily with
Proteins
Esters
Acids
Proteins and esters

The compound that is added in small amounts to make a polymer more soft and pliable is called a plasticizer. A polymer is a large molecule made up of repeating units.

Plasticizer is a low molecular weight substance that is added to the polymer to improve its flexibility and moldability. Plasticizers work by increasing the free volume in the polymer, which allows the polymer chains to move more easily and become more pliable.

Plasticizers are commonly used in the production of a wide range of products, including vinyl flooring, automotive parts, and medical devices. However, it's important to note that plasticizers can also have negative environmental and health effects, and there is ongoing research into developing safer alternatives.

To know more about plasticizer  visit:-

https://brainly.com/question/31542885

#SPJ11

The strawberry Koolaid solution has a pH of 5.4, making it mildly acidic.

The pH scale is 0 to 14, with 7 indicating neutral. Any pH number less than 7 is considered acidic, whereas any pH value greater than 7 is considered basic or alkaline. Pure water has a pH of 7, which is considered neutral. As a result, a pH value less than 7 suggests that the solution contains more hydrogen ions (H+) than hydroxide ions (OH-). To put it a different way, the solution is acidic.

Citric acid, which is added to strawberry Koolaid to give it a tangy flavor, is a flavoring for drink mixes. Citric acid is a weak organic acid used as a food preservation and flavoring ingredient. Because citric acid is present, when the Koolaid mix is mixed in water, it produces a somewhat acidic solution.

As a result of the pH of 5.4, we can deduce that the strawberry Koolaid solution is mildly acidic.

Learn more about pH meter:

https://brainly.com/question/24242819

By comparing the measured cell potentials with the reduction potential of Pb, we can determine the identity of metals X and Y.

To identify the unknown metals X and Y, we can compare their measured cell potentials with the reduction potentials of different metals, including magnesium (Mg), silver (Ag), and zinc (Zn). By using the reduction potential of lead (Pb) as a reference, we can determine which metals have higher or lower reduction potentials.

First, let's assume X is one of the metals and Y is the other. We can compare the measured cell potentials for X and Y with the reduction potential of Pb.

If the measured cell potential for X is more negative than the reduction potential of Pb, and the measured cell potential for Y is more positive than the reduction potential of Pb, then X is more easily oxidized than Pb (has a lower reduction potential) and Y is less easily oxidized than Pb (has a higher reduction potential).

By comparing the measured cell potentials with the reduction potential of Pb, we can determine the identity of metals X and Y.

Learn more about cell potentials: brainly.com/question/1313684

#SPJ11

To find the temperature of neon, we can use the ideal gas law equation which states that PV = nRT, where P is the absolute pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin. Since both gases have the same mass density and the same absolute pressure, we can assume that they also have the same volume and number of moles.

We know that the mass density of helium is less than that of neon, which means that the same volume of helium contains fewer moles than neon. However, since the volume is the same, the number of moles must be equal for both gases. Therefore, we can use the mass density to find the number of moles of helium: mass density = mass/volume mass = mass density x volume n = mass/molar mass n(He) = (mass density of He x volume)/(molar mass of He) Similarly, we can find the number of moles of neon: n(Ne) = (mass density of Ne x volume)/(molar mass of Ne) Since both gases have the same number of moles and absolute pressure, we can equate their ideal gas law equations: PV = n(He)RT(He) = n(Ne)RT(Ne) Substituting the values, we get: P x V = [(mass density of He x volume)/(molar mass of He)] x R x 175 P x V = [(mass density of Ne x volume)/(molar mass of Ne)] x R x T(Ne) Dividing both equations, we get: T(Ne) = [(mass density of He x molar mass of Ne)/(mass density of Ne x molar mass of He)] x 175 Substituting the values, we get: T(Ne) = [(0.1785 kg/m^3 x 20.18 g/mol)/(0.9002 kg/m^3 x 4.003 g/mol)] x 175 T(Ne) = 70.5 K Therefore, the temperature of neon is 70.5 K.

Learn more about density here-

https://brainly.com/question/15164682

#SPJ11

A common hazard when using a separatory funnel is both (a) the release of aerosols when venting the funnel and (c) pressure build-up in the funnel.

A separatory funnel is laboratory glassware used to separate immiscible liquids with different densities. During the process, pressure can build up inside the funnel due to the production of gas or vapour. If the pressure is not released periodically, it can cause the funnel to burst or the stopper to be ejected forcefully, posing a significant safety risk.
To prevent pressure build-up, it is crucial to vent the separatory funnel regularly. However, venting the funnel can also create a hazard, as it may release aerosols, which are tiny liquid droplets or solid particles suspended in the air. Aerosols can be harmful if they contain toxic, corrosive, or otherwise hazardous substances. Inhaling or coming into contact with such aerosols may pose health risks.
To minimize these hazards, ensure that you follow proper safety protocols when using a separatory funnel. These include wearing appropriate personal protective equipment (PPE) like gloves, goggles, and lab coats, working in a well-ventilated area or a fume hood, and venting the funnel away from your face and other people. By taking these precautions, you can safely use a separatory funnel while minimizing the risks associated with aerosol release and pressure build-up.

To learn more about aerosols, refer:-

https://brainly.com/question/28170202

#SPJ11

I require only one electron to complete its outer shell. Therefore option 2 is correct.

The elements in the halogen family, including fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At), are very reactive because they require only one electron to complete their outermost electron shell.

In terms of their electron configuration, halogens have seven valence electrons, which is one electron short of a full outer shell. This electron configuration makes them highly reactive as they have a strong tendency to gain an additional electron to achieve a stable electron configuration with a full outer shell of eight electrons.

This is known as achieving a noble gas configuration, similar to the noble gases in Group 18.

In summary, the high reactivity of halogens is primarily due to their strong desire to gain one electron to complete their outermost electron shell and achieve greater stability.

Know more about halogen:

https://brainly.com/question/31220722

#SPJ12

In this case, propofol and alcohol both have depressant effects on the central nervous system, which means that when taken together, their combined effects are more potent than if they were taken separately.

The synergism between propofol and alcohol can be classified as a type of chemical incompatibility. This is because when these two substances are combined, they can have a greater effect than if they were taken separately, potentially leading to dangerous interactions and adverse effects.

However, it is important to note that this chemical incompatibility can also lead to physical and therapeutic incompatibility, as the combined effects of propofol and alcohol can cause physical symptoms and may not be suitable for certain therapeutic applications.

In this case, propofol and alcohol both have depressant effects on the central nervous system, which means that when taken together, their combined effects are more potent than if they were taken separately. This can lead to increased sedation, respiratory depression, and other potential risks.

to learn more about respiratory depression click here:

brainly.com/question/31597354

#SPJ11

SN1, SN2, E1, and E2 reactions are all nucleophilic substitution reactions. In an SN1 reaction, a nucleophile attacks a carbon atom with a leaving group attached.

This can occur in either a polar or nonpolar solvent. In an SN2 reaction, a nucleophile attacks a carbon atom without a leaving group. This usually occurs in a polar solvent.

In an E1 reaction, a base removes a hydrogen atom from a carbon atom and a leaving group forms. This usually occurs in a polar solvent. In an E2 reaction, a base removes a hydrogen atom from a carbon atom, and a leaving group does not form. This usually occurs in a nonpolar solvent.

In reaction A, 1 bromo pentane is treated with sodium methanethiolate in acetonitrile to give a thioether product. This is an SN2 reaction because a nucleophile (sodium methanethiolate) attacks a carbon atom without a leaving group.

In reaction B, 1 bromo pentane is treated with sodium methoxide in methanol to give an ether product. This is an SN2 reaction because a nucleophile (sodium methoxide) attacks a carbon atom without a leaving group.

In reaction C, 1 bromo pentane is treated with potassium tert butoxide in tert butanol to give 1 pentene. This is an E1 reaction because a base (potassium tert butoxide) removes a hydrogen atom from a carbon atom, and a leaving group forms.

Know more about nucleophilic substitution here

https://brainly.com/question/31607176#

#SPJ11

Among the options provided, [tex]AlCl_3[/tex], is a Lewis acid.

The Lewis acid is a species that can accept a pair of electrons, forming a new covalent bond. The Lewis base is a species that can donate a pair of electrons to form a new covalent bond.

Among the options provided, [tex]CHBr_3[/tex], [tex]NH_3[/tex], and [tex]CBr_4[/tex] are Lewis bases because they have electron-rich atoms that can donate a pair of electrons.

On the other hand, [tex]AlCl_3[/tex] is a Lewis acid because it has an incomplete octet of electrons in its valence shell and can accept a pair of electrons to form a new covalent bond. Specifically, the aluminum atom has only six electrons in its valence shell, making it electron-deficient and prone to accepting a pair of electrons from a Lewis base to complete its octet.

Therefore, the correct answer is [tex]AlCl_3[/tex], which is a Lewis acid. [tex]CHBr_3[/tex], [tex]NH_3[/tex], and [tex]CBr_4[/tex] are Lewis bases because they have atoms with lone pairs of electrons that can donate to form new covalent bonds.

In summary, a Lewis acid is a species that can accept a pair of electrons to form a new covalent bond, while a Lewis base is a species that can donate a pair of electrons to form a new covalent bond.

Thus, Among the options provided, only [tex]AlCl_3[/tex] is a Lewis acid because it has an incomplete octet of electrons in its valence shell and can accept a pair of electrons.

For more such questions on Lewis acid.

https://brainly.com/question/15570523#

#SPJ11

54.4g is the mass in grams of potassium oxide that will be formed from 44.3 grams of potassium, according to the following reaction.

A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics, it was widely considered to be tied to the amount of matter within a physical body.

It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.

4K+O[tex]_2[/tex] →2K[tex]_2[/tex]O

moles of K= 44.3/38=1.16moles

According to stoichiometry

moles of potassium oxide= 1.16/2

                                           =0.58

mass of potassium oxide= 94.1×0.58

                                          = 54.4g

To know more about mass, here:

https://brainly.com/question/19694949

#SPJ1

To identify the structure of the unknown compound with the molecular formula C3H5BrO2, we can analyze the IR, 1H-NMR, and 13C-NMR spectra.

The IR spectra will provide information about the functional groups present in the molecule. We can see a strong absorption band around 1720 cm-1, which suggests the presence of a carbonyl group (C=O). We can also see a broad peak around 3300 cm-1, which suggests the presence of an OH group.
Moving on to the 1H-NMR spectrum, we can see a singlet at around 3.7 ppm, which indicates the presence of a methyl group (CH3). We can also see a triplet at around 4.6 ppm, which suggests the presence of a methylene group (CH2) adjacent to an electronegative atom (in this case, the bromine atom) molecular formula.
Finally, the 13C-NMR spectrum shows four distinct peaks. The first peak at around 14 ppm is attributed to the methyl group (CH3). The second peak at around 30 ppm corresponds to the methylene group (CH2) adjacent to the bromine atom. The third peak at around 65 ppm suggests the presence of a carbonyl group (C=O). The last peak at around 175 ppm is attributed to the carbon atom bonded to the oxygen atom in the carbonyl group.
Based on this information, we can conclude that the unknown compound is 2-bromo-2-hydroxypropanoic acid. The carbonyl group (C=O) and the OH group in the IR spectrum are consistent with the presence of a carboxylic acid group. The 1H-NMR and 13C-NMR spectra are consistent with the proposed structure. The methylene group adjacent to the bromine atom in the 1H-NMR spectrum and the peak at around 30 ppm in the 13C-NMR spectrum are consistent with the presence of a bromine atom. The carbonyl group and the carbon atom bonded to the oxygen atom in the 13C-NMR spectrum are also consistent with the proposed structure of a carboxylic acid. Therefore, we can confidently identify the structure of the unknown compound as 2-bromo-2-hydroxypropanoic acid.

Learn more about molecular formula  here

https://brainly.com/question/14425592

#SPJ11

The molecular geometry of a molecule is determined by the arrangement of its atoms in three-dimensional space. In the case of NH3 and H2CO, both molecules have three electron groups around the central atom. However, the molecular geometries of these molecules are not the same due to differences in the electronegativity and hybridization of their central atoms.

In NH3, the central nitrogen atom has three electron groups and is sp3 hybridized. The four sp3 hybrid orbitals are arranged in a tetrahedral geometry around the nitrogen atom, with the three hydrogen atoms occupying three of the four orbitals. The lone pair of electrons on the nitrogen atom occupies the fourth orbital, giving the molecule a trigonal pyramidal molecular geometry.

In contrast, the central carbon atom in H2CO also has three electron groups, but is sp2 hybridized. The three sp2 hybrid orbitals are arranged in a trigonal planar geometry around the carbon atom, with the two hydrogen atoms occupying two of the three orbitals. The remaining sp2 hybrid orbital forms a double bond with the oxygen atom, giving the molecule a bent or V-shaped molecular geometry.

Therefore, the difference in the molecular geometry of NH3 and H2CO can be attributed to differences in the hybridization and electronegativity of their central atoms.

for more such questions on molecular geometries

https://brainly.com/question/29650255

#SPJ11

The ethanol dissolves in water but carbon tetrachloride will not dissolve it is because of the hydrogen bonding present in ethanol but carbon tetrachloride does not contain hydrogen bonding

The similarity of the intermolecular interactions between the molecules of the two liquids—which is defined by the kinds and strengths of the bonds present in each molecule—is what determines whether two liquids are miscible. Compared to carbon tetrachloride and water, which have different polarities and weak intermolecular interactions, ethanol and water are miscible because of shared polarity and capacity to form hydrogen bonds.

The types of intermolecular forces that exist between the molecules of the two liquids determine whether two liquids are miscible. Due to the existence of polar -OH groups, ethanol and water have similar intermolecular interactions because both molecules are polar in nature. Therefore, ethanol molecules can form.

To know more about Hydrogen Bonding refers to this link

https://brainly.com/question/1420470

The condition that results when CO2 is eliminated from the body faster than it is produced in a process called respiratory alkalosis. It results in the blood becoming more alkaline.

This can occur due to a variety of factors such as hyperventilation, pulmonary embolism, and high altitude, among others.

In respiratory alkalosis, the blood pH increases above the normal range of 7.35-7.45, resulting in a more alkaline state.

Hyperventilation is one of the most common causes of respiratory alkalosis. This occurs when a person breathes rapidly, causing excessive elimination of CO₂ from the body. This can happen due to anxiety, panic attacks, or during certain types of physical activity. When the levels of CO₂ in the blood decrease, the pH of the blood increases, leading to respiratory alkalosis.

Pulmonary embolism is another condition that can lead to respiratory alkalosis. In this condition, a blood clot blocks a blood vessel in the lungs, resulting in decreased blood flow and oxygenation. This can lead to hyperventilation as the body tries to compensate for the lack of oxygen by increasing breathing rate, resulting in respiratory alkalosis.

High altitude is another factor that can cause respiratory alkalosis. At high altitudes, the concentration of oxygen in the air decreases, and the body tries to compensate by increasing breathing rate. This can result in hyperventilation, leading to respiratory alkalosis.

In conclusion, respiratory alkalosis is a condition that results from excessive elimination of CO₂ from the body, leading to an increase in blood pH and a more alkaline state. This can occur due to various factors such as hyperventilation, pulmonary embolism, and high altitude. Treatment of respiratory alkalosis depends on the underlying cause and may involve addressing the underlying condition or administering medications to balance the pH levels in the blood.

For more such questions on Respiratory alkalosis.

https://brainly.com/question/10889363#

#SPJ11

Ionic compounds in their solid state form crystalline lattices of alternating metallic cations and nonmetallic anions. The formation of this lattice releases a large amount of energy, known as the lattice energy.

This energy is the energy that is released when two oppositely charged ions come together and form a crystal lattice. It is this energy that is responsible for the stability of the solid ionic compound.

Lattice energy cannot be directly measured, but can only be approximated using thermodynamic data and its corresponding calculations.

Thermodynamic data such as enthalpy of formation, and entropy of formation are used to calculate the lattice energy of a given ionic compound. This lattice energy is the energy that must be put into an ionic compound to break it down into its component ions and gaseous form.

Know more about thermodynamic data here

https://brainly.com/question/29980991#

#SPJ11

The chemical formula CaCO₃ tells us the type and number of atoms present in the chemical compound.

Chemical or molecular formula is a notation indicating the number of atoms of each element present in one molecule of a substance.

Chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers.

According to this question, the chemical formula of calcium carbonate is given: CaCO₃. This chemical formula tells us that it contains calcium, carbon and oxygen atoms in the proportion 1:1:3.

Learn more about chemical formula at: https://brainly.com/question/29031056

#SPJ1

The change in enthalpy of the reaction is - 2225.97 kJ

To calculate ΔH of the reaction, C3H8(g) + 5O2(g) à 3CO2(g) + 4H2O(l)

Arrange the given reaction steps in such a way that the Reactants and the Products are on the exact same side as in the main reaction.

The first step has C3H8 on the product side, so reverse the entire reaction

C3H8(g) à 3C(s) + 4H2(g)

When the reaction is reversed so should the sign of ΔH.

So the new ΔH1 = + 103.85 kJ

The second and the third steps have Reactants and products aligned exactly the way it is in the main reaction, so no changes in the ΔH values are required for those.

The summation of the steps would be

C3H8(g) + 3C(s) + 3O2(g) + 4H2(g) + 2O2(g) à 3C(s) + 4H2(g) + 3CO2(g) + 4H2O(l)

The reactants and products which are underlined will get canceled from both sides.

Hence, the net reaction is weith enthalpy

C3H8(g) + 5O2(g) à 3CO2(g) + 4H2O(l)

Mathematically,

ΔHreaction = ΔH1 + ΔH2 + ΔH3

                  = + 103.85 kJ + (–1186.5 kJ) + (–1143.32 kJ)

            = - 2225.97 kJ

To know more about enthalpy, Click on

https://brainly.com/question/16720480

#SPJ1

The reaction for the formation of hydrogen sulfide (H2S) is given by: H2(g) + S(s) ⇌ H2S(g) Initial concentrations are 0.045 M H2, 0.070 M S, and no H2S. At equilibrium, the concentration of H2 is 0.010 M.

To determine the concentrations of S and H2S at equilibrium, we need to calculate the change in concentrations. Since the stoichiometry is 1:1, the decrease in H2 concentration (0.045 - 0.010 = 0.035 M) corresponds to an equal increase in H2S concentration. Therefore, at equilibrium, [H2S] = 0.035 M. Since S is a solid, its concentration remains unchanged (0.070 M), and it doesn't affect the equilibrium constant, K. To calculate K, use the equilibrium concentrations of H2 and H2S: K = [H2S] / [H2] K = (0.035 M) / (0.010 M) K = 3.5 Under the given reaction conditions at equilibrium, the concentrations are [H2] = 0.010 M, [S] = 0.070 M, [H2S] = 0.035 M, and K = 3.5.

Learn more about hydrogen sulfide here-

https://brainly.com/question/11837837

#SPJ11

Answer:the act of emitting radiation spontaneously

Explanation:

The given statement "Ions exist only in the electrolyte" is false because Ions can exist in various states, including in electrolytes, in solutions, and in crystals.

When atoms or molecules gain or lose electrons, they can produce ions, which are electrically charged particles. Ions that are dissolved in a liquid or molten solvent and may conduct electricity make up an electrolyte.

Ions can participate in chemical reactions by dissolving in a solvent, like water, to form a solution.

Ions can join forces with other ions of the opposite charge to form a lattice structure in a crystal, as is the case with an ionic solid like sodium chloride (NaCl). The claim that "ions exist only in the electrolyte" is untrue as a result.

For such more question on electrolytes:

https://brainly.com/question/1581652

#SPJ11

An acidic solution can be defined as one that has an excess of H+ ions .So the correct option is option B.

Acidity is a property of a substance that describes its ability to donate hydrogen ions (H+). A substance with a high concentration of H+ ions is considered acidic. In aqueous solutions, the concentration of H+ ions is balanced by the concentration of hydroxide ions (OH-). When the concentration of H+ ions is greater than the concentration of OH- ions, the solution is acidic.

Option A is incorrect because an excess of OH- ions in a solution makes it basic or alkaline, not acidic.

Option C is incorrect because the anion is not directly related to acidity. An anion is a negatively charged ion that is formed when an atom gains one or more electrons.

Option D is incorrect because electrochemistry deals with the transfer of electric charge in chemical reactions. Acidity is a broader concept that involves the concentration of H+ ions in a solution.

Option E is incorrect because the loss of electrons yielding a positively charged ion is called oxidation, which is not directly related to acidity.

Learn more about  anion here:

https://brainly.com/question/20781422

#SPJ11

The thin segments of the loop of Henle are the only segment where sodium is not actively transported out of the nephron. The correct answer is B.

For more such question on nephron

https://brainly.com/question/23851012

#SPJ11

Answer:

The total nuclear waste that exists worldwide is around more than a quarter million metric tons.

Explanation:

Nuclear waste is the most hazardous material in the world. Nuclear waste is radioactive and has the potential to release poisonous chemicals such as plutonium into the environment and may have the potential to put the life of surrounding living organisms in danger. With the release of these nuclear wastes leads to chronic health problems and genetic disorders.

Though nuclear waste was present throughout the world. the more nuclear waste around 90,000 metric tons of the waste was present in the US alone. This can be very dangerous at any time in the future. The people have to be more cautious about these nuclear wastes.

To know more about Nuclear Waste,  

https://brainly.com/question/1070894

Answer: B

Explanation: I took the test and got it right

They are not directly relevant to converting between grams of reactant and product.

To convert the grams of a reactant to the grams of a product, you need to use the mole ratio of reactant to product.

Therefore, the required conversions are:

The other two conversion factors listed (6.02 x 10^23 molecules reactant/mol reactant and 6.02 x 10^23 molecules product/mol product) are used to convert between the number of molecules and the number of moles of a substance and are not directly relevant to converting between grams of reactant and product.

Learn more about Grams

brainly.com/question/16188500

#SPJ11

Compared to magnesium anodes, zinc anodes tend to have a D) lower life expectancy.

Freshwater: Magnesium is the clear anode of choice. It offers superior protection in this low conductivity liquid. Zinc anodes are not suitable for use in freshwater because they build up a hard, dense coating over a period of months – rendering the anode less effective.

Magnesium anodes are the most common sacrificial anodes used for the protection of buried structures in the soil, such as oil and gas pipelines, bottom and external body of storage tanks.

The vast majority of lithium-ion batteries use graphite powder as an anode material.

TO KNOW MORE ABOUT magnesium anodes, zinc anodes CLICK THIS LINK -

brainly.com/question/20624633

#SPJ11

The half-reaction describes the oxidation or reduction process that occurs at an electrode during an electrochemical reaction. It shows the transfer of electrons between the species involved in the reaction. a) Half-reaction: H2(g) → 2H+(aq) + 2e-; Reaction quotient: Q = [H+]^2 / p(H2)

b) Half-reaction: AgCl(s) + e- → Ag(s) + Cl-(aq); Reaction quotient: Q = [Ag+][Cl-] / [AgCl]

c) Half-reaction: Fe2+(aq) → Fe3+(aq) + e-; Reaction quotient: Q = [Fe3+]/[Fe2+]

d) Half-reaction: Cu(s) → Cu2+(aq) + 2e-; Reaction quotient: Q = [Cu2+]/[Cu]

The reaction quotient (Q) is a measure of the relative concentrations of the species involved in the reaction at a particular point in time, and can be used to predict the direction of the reaction (whether it will proceed forward or backward). When Q is equal to the equilibrium constant (K), the reaction is at equilibrium.

To know more about electrons

brainly.com/question/1255220

#SPJ11

The solubility of ZnCO₃ in water at 25 °C is  6.71 * 10⁻⁶ M.

To calculate the solubility of ZnCO₃ in water at 25°C, we first need to look up the value of its solubility product constant (Ksp) in the ALEKS Data tab. The Ksp value for ZnCO₃ is 4.5 x 10⁻¹⁰ at 25°C.

The formula for the solubility of a slightly soluble salt (like ZnCO₃) is:

Ksp = [Zn²⁺][CO₃²⁻]

where [Zn²⁺] is the concentration of Zn²⁺ ions in solution and [CO₃²⁻] is the concentration of CO₃²⁻ ions in solution.

Since ZnCO₃ is a 1:1 salt, the concentrations of Zn²⁺ and CO₃²⁻ ions in solution will be equal. Let's call this concentration "x".

Therefore, Ksp = x²

Solving for x, we get:

[tex]x = \sqrt(Ksp) = \sqrt(4.5 * 10^{-10})[/tex] = [tex]6.71 * 10^{-6} M[/tex]

So the solubility of ZnCO₃ in water at 25°C is 6.71 * 10⁻⁶ M. Rounded to 2 significant digits, the answer is 6.71 * 10⁻⁶ M.

In other words, at equilibrium, the concentration of Zn²⁺ and CO₃²⁻ ions in a saturated solution of ZnCO₃ at 25°C will be approximately 6.71 * 10⁻⁶ M. Any more ZnCO₃ added to the solution will not dissolve and will remain as a solid precipitate.

To know more about solubility, refer to the link below:

https://brainly.com/question/31493083#

#SPJ11