It is okay to lift one end of the vehicle:
A) As long as two swing arms are being used
B) As long as the wheels have been chocked
C) As long as the swing arm restraints are engaged
D) None of the above
It is okay to lift one end of the vehicle B) As long as the wheels have been chocked.
What is a Safety Procedure?This refers to the processes that are undertaken in order to undertake a task safely, both for the person executing the task and others around.
Hence, we can see that It is okay to lift one end of the vehicle B) As long as the wheels have been chocked
This is because it would enable the vehicle to be safely positioned so the wheels would not roll off and cause an accident.
This safety procedure allows a person to raise one end of a vehicle, if the wheels have been chocked, to keep them in place.
Read more about safety procedures here:
https://brainly.com/question/14367881
#SPJ1
A motorcycle patrolman starts from rest at A two seconds after a car, speeding at the constant rate of 120 km/h, passes point A. If the patrolman acceler- ates at the rate of 6 m/s² until he reaches his maxi- mum permissible speed of 150 km/h, which he maintains, calculate the distance s from point A to the point at which he overtakes the car.
The distance, s from point A to the point at which he overtakes the car is 912 meters.
What is the formula for calculating the distance?Distance may be defined as the total movement of an object without any regard for direction. It is a type of scalar quantity. The formula for calculating the distance is as follows:
Distance = speed/time taken.According to the context of this question,
The speed of motorcycle patrolman = 120 km/h = 120 × 5/18 = 33.33 m/sec.
The maximum permissible speed = 150 km/h = 150 ×5/18 = 41.66 m/sec.
So, at the speed of 6 m/s², it takes 6.94 seconds.
The distance traveled in 6.94 sec = 1/2 (6)[tex](6.94)^2[/tex] = 144.67 m.
So, the cop overtakes the car when at,
33.333t = 144.67 + 41.666(t-2-6.9444)
t = 27.362 seconds.
Now, the distance, s from point A to the point at which he overtakes the car = car(27.362) = 33.333*27.362 = 912m.
Therefore, the distance, s from point A to the point at which he overtakes the car is 912 meters.
To learn more about Distance, refer to the link:
https://brainly.com/question/114551
#SPJ1
technician a says a defective pcv valve may cause rough idle operation. technician b says the pcv system depends upon a properly sealed engine to perform correctly. who is correct?
Technician A says a defective PCV valve may cause rough idle operation is correct and so is Tech B: So C)both A and B are correct.
What is the valve about?If a PCV valve is known to be stuck open, then the PCV valve is one that can be said to be faulty.
Note that a faulty PCV valve can lead to more air going into the combustion chamber that can leads to lean air-fuel ratio.
Therefore, Technician A says a defective PCV valve may cause rough idle operation is correct and so is Tech B: So C)both A and B are correct.
Learn more about PCV valve from
https://brainly.com/question/23860109
#SPJ1
Technician A says a defective PCV valve may cause rough idle operation. Technician B says the PCV system depends upon a properly sealed engine to perform correctly. Who is correct?
A)A only
B)B only
C)both A and B
D)neither A nor B
Which of the following helps support the implementation of software applications within a programming platform?
A. development tool
B. Visual Basic
C. parse
D. syntax
Answer:
A: development tool
Explanation:
Development tool helps support the implementation of software applications within a programming platform. Thus, the correct option for this question is A.
What do you mean by Software application?A Software application may be defined as a kind of computer program that significantly performs or operates a specific personal, educational, and business function with respect to the requirement of an individual.
In this modern era of technology, programming platforms develop new trends and ideas that are efficient and beneficial to consumers. These programming platforms implement software applications with the help and support of developmental tools.
Therefore, the option that helps support the implementation of software applications within a programming platform is known as the development tool. Thus, the correct option for this question is A.
To learn more about Programming platforms, refer to the link:
https://brainly.com/question/28465460
#SPJ2
2. Describe how these variables will be affected by the use of flaps.
a. Lift
b. Drag
c. Takeoff airspeed
d. Takeoff distance
e. Wing camber
The flap is used to lift the aircraft in the air as it provides them with balance.
What are flaps?The flaps' main function is to produce additional pull during decreased airspeed, therefore allowing the aircraft to fly at much low rpm with a reduced chance of crashing.
The flap is used to lift the aircraft in the air as it provides them with balance.
They are used for dragging the aircraft as it provides them with a certain amount of height with increases and lowers it.
The takeoff speed is slowed so relatedly to the flap as the change in the structure for the dynamic effect of the airspeed.
Flap reduces the takeoff distance as a smaller speed is being created, which reduces the feed with the coefficient of lift.
The class have a chamber it provides some hollow stairs through which they can store the good and services also it is sometimes used for oil storage.
Learn more about flaps, here:
https://brainly.com/question/17853240
#SPJ1
A warning placed in an installation manual for a piece of equipment indicates that the equipment must not be placed within 36 inches of flammable material. You need to know the value in centimeters (cm), and you know that one inch equals 2.54 cm. What is the allowable distance to flammable material in centimeters, to the nearest hundredth of a centimeter?
The allowable distance to flammable material in centimeters is equal to 91.44 cm.
What is a conversion factor?A conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.
Generally speaking, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.
In order to calculate the allowable distance to flammable material in centimeters, we use the following conversion factor.
Conversion:
1 inch = 2.54 cm.
36 inches = X cm.
Cross-multiplying, we have:
X = 2.54 × 36
X = 91.44 cm.
Read more on conversion factor here: brainly.com/question/28308386
#SPJ1
Help me with this question thank you!
Explanation:
Fire doors are closed and paths are clear
mr. smith has allowed mrs. jones to run a sewer line through mr. smith's backyard so that mrs. jones has access to the city sewer system. this is an example of a(n):
Since Mr. Smith allowed Mrs. Jones to run a sewer line through Mr. Smith’s backyard so that Mrs. Jones has access to the city sewer system, this is an example of an: A. Easement.
What is an easement?An easement can be defined as a contractual agreement between two or more parties, wherein an individual is granted an access to a real property (land) for a specific purpose and a specific amount of time without possessing it, in exchange for a fee.
This ultimately implies that, an easement refers to the right of a landowner to make use of another person's nearby real property (land) for a specific purpose and a specific amount of time.
Read more on easement here: https://brainly.com/question/22400838
#SPJ1
Complete Question:
Mr. Smith has allowed Mrs. Jones to run a sewer line through Mr. Smith’s backyard so that Mrs. Jones has access to the city sewer system. This is an example of a(n):
a. Easement
b. Encumberance
c. Estate for years
d. Title assurance
The quality control engineer at a petrochemical refinery is in a _____ position.
The quality control engineer at a petrochemical refinery is in a matrix position.
Who is an engineer?An engineer can be defined as a person who solves technical problems which are related to a product or a good. These are also engaged in developing new products full of the improvement of the efficiency and quality of the product.
A matrix's profile is determined by the object's row and column numbers, in that order.
Petrochemicals are indeed the chemical byproducts of the processing of gasoline. Some petroleum-derived chemical compounds can also be produced from these other oil and coal.
Learn more about engineer, here:
https://brainly.com/question/27222435
#SPJ1
why is ongoing safety training important
Answer:
Keeps workers interested and motivated, helping reduce dangerous behavior and eliminate hazardous situations
Explanation:
Frequent hands-on training and practice drives home the message that safety is a critical part of any work site. Safety should always be a top concern for every company and organization.
Dropping an electrical appliance into water, making it a foreign conductor, causes a(n)?
Dropping an electrical appliance into water, making it a foreign conductor, causes a: D. short circuit.
What is conduction?Conduction can be defined as a process which involves the transfer of electrical charge from one point to another in an electrical circuit, especially due to the movement of particles (electrons).
This ultimately implies that, when the conduction relates to electrical charge, it is referred to as electrical conduction.
In Electrical engineering, a short usually causes an electrical circuit protection device such as a fuse, circuit breaker, etc., to open when higher than normal current flows through the electrical circuit.
In this context, we can reasonably infer and logically deduce that a short circuit would occur when an electrical appliance is dropped into water.
Read more on short circuit here: brainly.com/question/25018411
#SPJ1
Complete Question:
Dropping An electrical appliance into water, making it a foreign conductor, causes a(n) A)overload. B)open circuit. C)closed circuit. D)short circuit.
technical terms on cars
Answer:
ABS: Antilock Braking System – Prevents the wheels from locking during emergency braking.
ACC: Adaptive Cruise Control – Monitors traffic ahead and reduces or increases the car's speed based on the flow of traffic.
AEB: ...
AWD: ...
BHP: ...
CVT: ...
DDI: ...
DFI:
Explanation:
hope it helpssss
Answer:
ABS: Antilock Braking System – Prevents the wheels from locking during emergency braking.
ACC: Adaptive Cruise Control – Monitors traffic ahead and reduces or increases the car's speed based on the flow of traffic.
AEB: ...
AWD: ...
BHP: ...
CVT: ...
DDI: ...
DFI:
An 80 uF capacitor is in series with a 9mH inductor. What is the total impedance at 60 Hz.?
(A) +j 36.55
(B) +j 29.77
(C) -j36.55
(D) -j29.77
Explanation:
Solving for the reactance
The first step is to determine the reactance (in ohms) for the inductor and the capacitor.
tech a says that riveted lining is usually for heavy-duty or high-performance vehicles. tech b says that bonded lining is glued to the metal brake shoe. who is correct?
Based on the information provided, the technician who is correct is: C. Both Technician A and Technician B.
How to diagnose a brake system?In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:
NoisesSmellsAbnormal brake pedal movements.Improper braking action.Riveted lining.Based on the information provided, we can reasonably infer and logically deduce that both Technician A and Technician B are correct because bonded lining can be glued to a metal brake shoe while riveted lining is typically used for high-performance or heavy-duty automobile vehicles
Read more on bonded lining here: https://brainly.com/question/7625439
#SPJ1
Complete Question:
Technician A says that riveted lining is usually for heavy-duty or high-performance vehicles. Technician B says that bonded lining is glued to the metal brake shoe. Who is correct? a. Technician A b. Technician B c. Both A and B d. Neither A nor B
a technician is being asked to move a heavy industrial printer. which safety technique is recommended for this situation?
The safety technique that is recommended for this situation of moving a heavy industrial printer is to Bend at the knees when lifting.
What is a Safety Procedure?This refers to the process of executing a task in a safe and acceptable way that does not put the user or others at risk
Hence, we can see that The safety technique that is recommended for this situation of moving a heavy industrial printer is to Bend at the knees when lifting.
This is to ensure that the person doing the lifting does not injure himself and has the proper form when lifting.
Read more about safety procedures here:
https://brainly.com/question/14367881
#SPJ1
What do you understand if someone says assembling of EC components
Answer:
Assembling is the arranging of electronic components to be soldered onto the circuit board
Technician a says that only manufacturers offer vehicle warranties. technician b says that aftermarket warranties are available for consumers to purchase. which technician is correct?
Based on the information provided, the technician who is correct is Technician B only.
What is an extended warranty contract?An extended warranty contract is sometimes referred to as an aftermarket warranty and it can be defined as an elongation of the coverage period on a service agreement that was entered between a manufacturer and the customer (consumers).
Generally, some of the characteristics and features of an extended warranty contract include the following:
An extended warranty contract provides protection beyond the manufacturer's original warranty.An extended warranty contract constitutes a separate performance obligation.An extended warranty contract is available for consumers to purchase.Based on the information provided, we can reasonably infer and logically deduce that the technician who is correct is Technician B only.
Read more on extended warranty contract here: https://brainly.com/question/27241092
#SPJ1
2. Describe one example of something that might be a need for you but a want for
someone else.
Answer:
1: water food or shelter
what is a lintel? question 7 options: upright beam beam used to span an opening a form of volcanic stone a type of marble
Answer: A lintel is a type of beam that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item
Com base no memorial descritivo abaixo, resolva os seguintes itens:
a) Calcule a área total em metros quadrados do terreno;
b) Calcule as coordenadas dos vértices do terreno A-B-C-D;
c) Calcule o Azimute e Distância entre os vértices do terreno A-B-C-D-A.
Memorial Descritivo do Terreno
Um lote urbano situado no município de Camanducaia-MG, localizado no Bairro Centro, na Rua dos Topógrafos, nº 100. Proprietário Haruo Shiroma, Mestre de Obras, divorciado, residente e domiciliado nesta Cidade. O terreno inicia-se no Vértice A de coordenada X=2.224,533 e coordenada Y=585,849; deste segue para o Vértice B com Azimute 330°00’00” e distância de 15,00 metros, confrontando do Vértice A ao Vértice B com a Rua dos Topógrafos; daí deflete a direita e segue para o Vértice C com ângulo interno de 135°00’00” e distância de 25,00 metros, confrontando do Vértice B ao Vértice C com o Imóvel de nº 90; daí segue para o Vértice D de coordenada X=2.230,344 e coordenada Y=604,194, confrontando do Vértice C ao Vértice D com o Imóvel de nº 505; daí segue para o Vértice A, início da descrição, com Azimute de CALCULAR AZIMUTE e distância de CALCULAR DISTÂNCIA metros, confrontando do Vértice A ao Vértice D com o Imóvel nº 110; encerrando uma área total de CALCULAR A ÁREA TOTAL
Answer:
idek
Explanation
himomy
Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by ____.
Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.
What is Shape Dimension?In regards to geometry, the three-dimensional shape is known to be one that can be said to be a form of solid figure or an object/shape that is of known to be made up of three dimensions which are length, width, and height.
Note that the three-dimensional shapes have height as well as thickness or depth.
Therefore, Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.
Learn more about Shape from
https://brainly.com/question/3701983
#SPJ1
A gas in a piston-cylinder device is compressed, and as a result its temperature rises. is this a heat or work energy interaction?
Answer::
It is a work interaction as the compression process moves the piston by an external force.
Explanation:
If a bearing needs 4. 0 s to solidify enough for impact, how high must the tower be?.
In order to determine the height of the tower, we would apply the second equation of motion and assume that the downward motion is negative.
Mathematically, the second equation of motion is given by this formula:
S = ut + ½gt²
Where:
S represents the distance or height.u represents the initial velocity.a represents the acceleration.t represents the time.Substituting the given parameters into the formula, we have;
S = S₀ + ut - ½gt²
0 = S₀ + (0)4.0 - ½ × (9.8) × 4.0²
0 = S₀ - 4.9 × 16.0
Height, S₀ = 78.4 meters.
How to calculate the bearing's impact velocity?In order to calculate the bearing's impact velocity, we would apply the first equation of motion:
V = u - at
V = 0 - 9.8(4.0)
Impact velocity, V = 39.2 m/s.
Read more on velocity here: https://brainly.com/question/19365526
#SPJ1
Complete Question:
Ball bearings can be made by letting spherical drops of molten metal fall inside a tall tower, called a shot tower, and solidify as they fall.
a. If a bearing needs 4.0 s to solidify enough for impact, how high must the tower be?
b. What is the bearing's impact velocity?
Early engines were called flat head designs because they ________. used valves beside the cylinder used spark plugs at the top of the cylinders were only inline engines did not include valves.
Early engines were called flathead designs because they used spark plugs at the top of the cylinders.
What are engines?
Engines can be defined as motor or a machine that is used in the internal part of the combustion. These are used in various vehicles like ships, airplanes, bikes, etc
At the top of the cylinder close it so that the leakage won't be there, and the design could send the spark to the engine through which the Indian can get started.
These engines are the main reason because of which the vehicle moves and processes various features like sound or light.
Learn more about engines, here:
https://brainly.com/question/1232655
#SPJ1
Before attempting to put out a
small fire near flammable
materials you should
A| Remove the flammable materials to a safe place
B| Run to the nearest phone to call for help
C| Sound the alarm
D| Put on protective clothing
To create a tempered metal, heat the metal to a specific temperature and then cool it.
The process of creating a tempered metal by heating it to a specific temperature and then cooling it is known as Annealing.
How metal is tempered?In metallurgy, Metal is tempered by a process that significantly improves the characteristics of metal by heating it to a high temperature, though below the melting point, and then allowing it to cool, usually in the air.
According to the context of this question, the process of annealing remarkably involves heating steel to a particular temperature and then cooling it at a gradual and controlled rate. This process is often utilized in order to soften a metal for cold working.
Therefore, annealing is the process of creating a tempered metal by heating it to a specific temperature and then cooling it.
To learn more about tempering, refer to the link:
https://brainly.com/question/1411105
#SPJ1
The Quantity (13+j17)/(15-j10) in Phasor form equals:
Explanation:
To express the complex number into the standard form,
a + bi , we need to multiply both numerator and denominator by the complex conjugate of 15-j10.
Deduce the general exponential fourier series as derived in biomedical analog signals and systems
Answer:
Exponential Series
Explanation:
Answer:
[tex]{ \rm{x(t) = a_{0} + \sum a_{k} \cos \omega t + \sum b _{k} \sin \omega t }}[/tex]
[tex]{ \tt{ a_{0} = \frac{2}{t} \int x(t) \: dx}} \\ \\ { \tt{ a_{k} = \frac{1}{t} \int x(t) \cos \omega t \: dx }} \\ \\ { \tt{ b_{k} = \frac{1}{t} \int x(t) \sin \omega t \: dx }}[/tex]
An 802.11 frame contains a number of fields. which field describes the version of 802.11 that is being used?
An 802.11 frame contains a number of fields. frame control field describes the version of 802.11 that is being used.
What is frame control?Information is conveyed as a byte torrent across a moment in time interconnect called a frame among two or more devices. Upon reaching a significant frame, a package is split into a shorter person.
There are several specializations inside the framing modulation process that are used to characterize the frames and execution. These comprise the 802.11 version that is used by the person and is being processed in the input.
Learn more about frame control, here:
https://brainly.com/question/14513120
#SPJ1
a threaded rod has 11 threads per inch how many threads are there in 16 inches of the rod.
will give brainliest
Answer: 176 threads
Explanation:
11 threads : 1 inch
16 inches * 11 threads/1 inch=
16*11/1=
16*11=176 threads