The maximum intensity outside the central diffraction peak is zero. Therefore, the answer is 0% of the maximum intensity (Im) of the central diffraction peak.
To determine the maximum intensity (relative to the maximum intensity of the central diffraction peak) of the double-slit diffraction pattern outside the central diffraction peak, we can use the formula for the intensity of the double-slit interference pattern:
[tex]I = Im \times (sin(\pi y / \lambda L) / (\pi y / \lambda L))^2 \times (sin(\pi d / \lambda L) / (\pi d / \lambda L))^2[/tex]
Where:
I is the intensity at a given point on the screen,Im is the intensity of the central diffraction peak,y is the distance from the central maximum,λ is the wavelength of light,L is the distance from the double-slit to the screen,d is the separation between the slits.In this case, we are given:
[tex]\lambda = 500 nm = 500 \times 10^{(-9)} m[/tex],
[tex]d = 1.6 mm = 1.6\times 10^{(-3)} m[/tex],
[tex]L = 3 m.[/tex]
To find the maximum intensity outside the central diffraction peak, we need to find the point where the interference pattern is coincident with the diffraction minimum. At this point,[tex]sin(\pi y / \lambda L)[/tex] equals zero, resulting in maximum intensity.
Using the given values and substituting them into the formula, we get:
[tex]I = Im \times (sin(\pi y / \lambda L) / (\pi y / \lambda L))^2 \times (sin(\pi d / \lambda L) / (\pi d / \lambda L))^2[/tex]
Since [tex]sin(\pi y / \lambda L)=0[/tex], the first term becomes 0, resulting in:
[tex]I = 0 \times (sin(\pi d / \lambda L) / (\pi d / \lambda L))^2[/tex]
As a result, the maximum intensity outside the central diffraction peak is zero. Therefore, the answer is 0% of the maximum intensity (Im) of the central diffraction peak.
Learn more about maximum intensity: brainly.com/question/28908643
#SPJ11
What voltage is produced by a 27 μh inductor if the current through the inductor is increasing at a rate of 63 ma/s?
The voltage produced by the 27 µH inductor, if the current through the inductor is increasing at a rate of 63 mA/s, is 1.701 mV.
The voltage produced by an inductor is given by the formula:
V = L*(di/dt)
where V is the voltage, L is the inductance, and di/dt is the rate of change of current.
Substituting the given values:
L = 27 µH = 27 x [tex]10^{-6}[/tex] H
di/dt = 63 mA/s = 63 x [tex]10^{-3}[/tex] A/s
V = (27 x [tex]10^{-6}[/tex] H) * (63 x [tex]10^{-3}[/tex] A/s) = 1.701 mV
Therefore, the voltage produced by the 27 µH inductor if the current through the inductor is increasing at a rate of 63 mA/s is 1.701 mV.
To learn more about Inductor Voltage visit:
brainly.com/question/31310905
You want your mulitmeter to have high or low resistance?
A) high
B) low
Answer:the answer is A) high.
Explanation:If you want to measure voltage or current without affecting the circuit or device being tested, you should use a multimeter with high input impedance or high resistance.
Find the f-number of a telescope with an objective diameter of 8.0 cm and a focal length of 95 cm.
Find the aperture diameter of an f/1.5 all-sky meteor camera lens with a focal length of 2.0 mm.
The f-number of the telescope is 11.9 and the aperture diameter of the f/1.5 all-sky meteor camera lens is 1.33 mm.
The f-number of a telescope is determined by dividing the focal length of the telescope by the diameter of its objective lens. In this case, the objective diameter is 8.0 cm and the focal length is 95 cm, so the f-number can be calculated as follows:
f-number = focal length / objective diameter
f-number = 95 cm / 8.0 cm
f-number = 11.9
Therefore, the f-number of the telescope is 11.9.
For the second part of the question, we are given an f-number of 1.5 and a focal length of 2.0 mm for an all-sky meteor camera lens. The aperture diameter can be found by rearranging the formula for f-number:
f-number = focal length / aperture diameter
Rearranging the formula to solve for aperture diameter gives:
aperture diameter = focal length / f-number
Substituting the values given in the question gives:
aperture diameter = 2.0 mm / 1.5
aperture diameter = 1.33 mm
Therefore, the aperture diameter of the f/1.5 all-sky meteor camera lens is 1.33 mm.
For more such questions on Aperture diameter.
https://brainly.com/question/31361298#
#SPJ11
A uniform rod BC of mass 4 kg is connected to a collar A by a 250-mm cord AB. Neglecting the mass of the collar and cord, determine (a) the smallest constant acceleration aA for which the cord and the rod lie in a straight line, (b) the corresponding tension in the cord.
(a) The smallest constant acceleration aA for which the cord and the rod lie in a straight line is -2.4275 [tex]m/s^2[/tex].
(b) The corresponding tension in the cord is 19.65 N.
To solve this problem, we need to use Newton's second law of motion, which states that the net force acting on an object is equal to its mass times its acceleration.
(a) Let's start by considering the motion of the collar A. The tension in the cord pulls the collar towards the right, and the weight of the rod pulls it downwards. The acceleration of the collar, aA, is also the acceleration of the rod, since they are connected by the cord.
Using Newton's second law, we can write the equation:
maA = T - mg
where m is the mass of the rod, g is the acceleration due to gravity, T is the tension in the cord, and we have taken upwards as positive.
Since we want the cord and the rod to lie in a straight line, we can assume that the angle between the cord and the vertical is very small, and thus we can approximate sin(theta) = theta. This allows us to relate the tension T to the distance AB:
T = kAB
where k is a constant that depends on the angle between the cord and the vertical, but we can approximate it as 1.
Substituting this into the equation above, we get:
maA = AB - mg
Solving for aA, we get:
aA = (AB - mg)/m
Substituting the given values, we get:
aA = (0.25 - 4*9.81)/4 = -2.4275 [tex]m/s^2[/tex]
Note that the negative sign means that the collar and rod will move to the left.
(b) To find the tension in the cord, we can use the equation T = maA + mg. Substituting the values we get:
T = 4*(-2.4275) + 4*9.81 = 19.65 N
Therefore, the corresponding tension in the cord is 19.65 N.
For more such questions on Tension.
https://brainly.com/question/29989325#
#SPJ11
Which of the following is one of the main functions of a transistor in a circuit?
Answer:
To act as a switch to control the flow of charge in a circuit
Explanation:
A transistor acts like a gate, this we can say it closes and opens , this is what we call control
suppose a current of flows through a copper wire for minutes. calculate how many moles of electrons travel through the wire. be sure your answer has the correct unit symbol and round your answer to significant digits.
To calculate the number of moles of electrons that travel through the wire, we need to know the current in amperes, the time in seconds, and Faraday's constant.
Once we have these values, we can use the formula n = (I x t) / (F x e-) to calculate the number of moles of electrons. The unit symbol for moles is mol, and we should round our answer to the appropriate number of significant digits.
To solve this problem, we need to use the formula relating current, time, and the number of electrons:
n = (I * t) / (F * e)
where:
n is the number of moles of electrons
I is the current in amperes
t is the time in seconds
F is Faraday's constant (96,485 coulombs/mole)
e is the charge on an electron (1.602 x 10⁻¹⁹ coulombs)
First, we need to convert the time from minutes to seconds:
t = 1 minute * 60 seconds/minute = 60 seconds
Then, we can plug in the values and solve for n:
n = (I * t) / (F * e)
n = (I * 60 s) / (96,485 C/mol * 1.602 x 10⁺¹⁹ C/e)
n = 3.725 * 10⁺⁴ * I mol
Therefore, the number of moles of electrons that travel through the wire is 3.725 * 10⁻⁴ times the current, in moles. We don't know the current, so we can't give an exact answer, but we can write it in general form:
n = 3.725 x 10⁻⁴ I mol
Note that the unit of current is amperes (A), and the unit of moles is mol, so the final answer should have units of mol.
To know more about the current refer here :
https://brainly.com/question/13076734#
#SPJ11
when the sun oscillates, a region of gas alternates between moving toward earth and moving away from earth by about 10 km. when the gas is moving toward earth its light is
When the gas is moving toward earth, its light is shifted to shorter wavelengths due to the Doppler effect. This means that the light appears bluer than when the gas is moving away from earth.
When the sun oscillates, a region of gas alternates between moving toward Earth and moving away from Earth by about 10 km. When the gas is moving toward Earth, its light is blueshifted. This is because the wavelengths of light emitted by the gas are compressed as the gas moves toward us, causing the light to shift toward the shorter (blue) end of the spectrum.
learn more about "Earth":-https://brainly.com/question/31064851?referrer=searchResults
#SPJ11
0.03 Volts =
A) 3 microvolts
B) 30 millivots
C) 3 Volts
D) 300 Volts
E) 30 millivolts
The0.03 volts are equal to 30 millivolts. The prefix "milli" denotes a factor of 1/1000, while the prefix "micro" denotes a factor of 1/1,000,000. Therefore, 0.03 volts is larger than 3 microvolts (which is 0.000003 volts), but smaller than 3 volts and 300 volts.
The correct answer is option E, which states that 0.03 volts is equal to 30 millivolts. A millivolt is one-thousandth of a volt, so multiplying 0.03 volts by 1000 gives the answer of 30 millivolts. Millivolts are commonly used to measure small voltage changes, such as those in biomedical signals, whereas volts are used to measure larger electrical potentials. Therefore, understanding the relationship between volts and millivolts is important for accurately measuring and interpreting electrical signals in various applications.
learn more about millivolts here.
https://brainly.com/question/26666535
#SPJ11
an 8 lb weight attached to a spring exhibits simple harmonic motion. determine the equation of motion if the spring constant is 1 lb/ft and if the weight is released 6 in. below the equilibrium position with a downward velocity of 3 2 ft/s.
Therefore, the equation of motion for the system is: x(t) = 0.5 cos(2.0147 t + 2.103)
The equation of motion for a simple harmonic oscillator is:
x(t) = A * cos(ωt + φ)
x is the displacement from equilibrium at time t, A is the amplitude of the motion, ω is the angular frequency, and φ is the initial phase angle.
The equation of motion for the given system, we need to determine the values of A, ω, and φ.
The amplitude of the motion is the maximum displacement from equilibrium, which occurs when the weight is released. Since the weight is released 6 inches below the equilibrium position, the amplitude is 6 inches, or 0.5 feet.
The angular frequency of the motion is given by:
ω = (k/m)
where k is the spring constant and m is the mass of the weight. Converting the mass from pounds to slugs (since the unit of force in the English system is pounds), we have:
m = 8 lb / 32.174 ft/s = 0.2483 slugs
Therefore, the angular frequency is:
ω = sqrt(1 lb/ft / 0.2483 slugs) = 2.0147 rad/s
To find the initial phase angle, we need to know both the initial displacement and the initial velocity. Since the weight is released 6 inches below the equilibrium position with a downward velocity of 3 2 ft/s, the initial displacement is -0.5 feet and the initial velocity is -3.2 ft/s (since it is downward).
The phase angle can be found using the equation:
φ = arctan(-v0/(ωx0))
where v0 is the initial velocity, x0 is the initial displacement, and arctan is the inverse tangent function. Plugging in the values, we get:
φ = arctan(-(-3.2 ft/s) / (2.0147 rad/s * 0.5 ft)) = 2.103 radians
Learn more about harmonic motion Visit: brainly.com/question/20885248
#SPJ4
the light emitted by a helium-neon laser has wavelenght of 632 nm in air. as the light travels from air into zircon, find its speed
The speed of light in zircon is approximately 156,000,000 m/s.
To find the speed of light in zircon, we can use the formula:
n = c/v
where n is the refractive index of zircon, c is the speed of light in vacuum, and v is the speed of light in zircon.
To find the refractive index of zircon, we need to know the ratio of the speed of light in air to the speed of light in zircon:
n = [tex]v_{air}/v_{zircon[/tex]
We can use Snell's law to find this ratio:
[tex]n_{air} * sin\theta_{air} = n_{zircon} * sin\theta_{zircon}[/tex]
where [tex]n_{air[/tex] and [tex]n_{zircon[/tex] are the refractive indices of air and zircon, respectively, and [tex]\theta_{air[/tex] and [tex]\theta_{zircon[/tex] are the angles of incidence and refraction, respectively.
Assuming the incident angle is zero degrees, we have:
[tex]n_{air} * sin(0) = n_{zircon} * sin\theta_{zircon}[/tex]
[tex]sin(\theta_{zircon})[/tex] = 0 (since sin(0) = 0)
Therefore, [tex]\theta_{zircon[/tex] = 0, and the light travels through zircon along the same path as in air.
Thus, the ratio of the speed of light in air to the speed of light in zircon is simply:
[tex]n = v_{air}/v_{zircon} = 1/n_{zircon[/tex]
Since we know the wavelength of the light in air (632 nm), we can use the formula:
n = c/v
to find the speed of light in zircon:
v = c/n = c * [tex]n_{zircon[/tex]
where c is the speed of light in vacuum.
To find the refractive index of zircon at 632 nm, we can use a refractive index table or equation. A common equation used for zircon is the Sellmeier equation:
[tex]n^2 = 1 + B1 * \lambda^2 / (\lambda^2 - C1) + B2 * \lambda^2 / (\lambda^2 - C2) + B3 * \lambda^2 / (\lambda^2 - C3)[/tex]
where n is the refractive index, lambda is the wavelength in micrometers, and B1, B2, B3, C1, C2, and C3 are constants specific to zircon.
We can convert the wavelength of the light from nanometers to micrometers:
[tex]\lambda[/tex] = 632 nm / 1000 = 0.632 um
Using the Sellmeier equation for zircon with the following constants:
B1 = 1.30423, B2 = 0.550691, B3 = 0.175379
[tex]C1 = 0.00788554 um^2, C2 = 0.0226450 um^2, C3 = 101.184 um^2[/tex]
we get:
[tex]n^2 = 1 + 1.30423 * 0.632^2 / (0.632^2 - 0.00788554) + 0.550691 * 0.632^2 / (0.632^2 - 0.0226450) + 0.175379 * 0.632^2 / (0.632^2 - 101.184)[/tex]
n = 1.9254
Therefore, the speed of light in zircon is:
v = c/n = 299792458 m/s / 1.9254 = 155899187 m/s (rounded to the nearest integer)
For more such questions on Speed.
https://brainly.com/question/10599901#
#SPJ11
wire 1 carries 1.80 a of current north, wire 2 carries 3.80 a of current south, and the two wires are separated by 1.40 m. 1) calculate the magnitude of the force acting on a 1.00-cm section of wire 1 due to wire 2. (express your answer to three significant figures.)
To calculate the force acting on a section of wire 1 due to wire 2, we can use the formula for the magnetic force between two parallel wires: [tex]F = μ₀I₁I₂L/(2πd)[/tex]
where μ₀ is the permeability of free space, [tex]I₁ and I₂[/tex] are the currents in wires 1 and 2, L is the length of the wires, and d is the distance between them.
Plugging in the given values, we get
[tex]F = (4π×10⁻⁷ T·m/A) × (1.80 A) × (3.80 A) × (0.01 m) / (2π×1.40 m) ≈ 3.69×10⁻⁵ N.[/tex]
This means that there is a force of about [tex]3.69×10⁻⁵ N[/tex] acting on a 1.00-cm section of wire 1 due to wire 2.
This force is attractive, since the currents in the two wires are in opposite directions.
To know more about magnetic force refer here:
https://brainly.com/question/3160109#
#SPJ11
1. What is the energy change (in J) associated with an electron in a hydrogen atom moving from energy leveln=3 to n=6?Type answer:2. If a photon has a wavelength of 449.8 nm, what is the energy of the photon (in J)?
1. The energy change associated with the electron moving from n=3 to n=6 is approximately: -6.05 x [tex]10^{-20[/tex] Joules.
2. The energy of the photon with a wavelength of 449.8 nm is approximately: 4.42 x [tex]10^{-19[/tex] Joules.
1. To calculate the energy change (in J) associated with an electron in a hydrogen atom moving from energy level n=3 to n=6, we can use the following formula:
ΔE = -13.6 * ([tex]1/nf^2 - 1/ni^2[/tex]) eV
where ΔE is the energy change,
nf is the final energy level (6), and
ni is the initial energy level (3).
Convert eV to Joules by multiplying by 1.6 x [tex]10^{-19[/tex] J/eV.
ΔE = -13.6 * ([tex]1/6^2 - 1/3^2[/tex]) eV
ΔE = -13.6 * (1/36 - 1/9) eV
ΔE = -13.6 * (0.0278) eV
ΔE = -0.378 eV
ΔE = -0.378 * (1.6 x [tex]10^{-19[/tex]) J
ΔE ≈ -6.05 x [tex]10^{-20[/tex] J
2. To find the energy of a photon with a wavelength of 449.8 nm, we can use the equation:
E = (hc) / λ
where E is the energy of the photon,
h is Planck's constant (6.63 x [tex]10^{-34[/tex] Js),
c is the speed of light (3 x [tex]10^8[/tex] m/s), and
λ is the wavelength (449.8 nm, converted to meters: 449.8 x [tex]10^{-9[/tex] m).
E = (6.63 x [tex]10^{-34[/tex] Js)(3 x [tex]10^8[/tex] m/s) / (449.8 x [tex]10^{-9[/tex] m)
E ≈ 4.42 x [tex]10^{-19[/tex] J
To know more about "Electron" refer here:
https://brainly.com/question/13998346#
#SPJ11
A 0.150-kg rubber stopper is attached to the end of a 1.00-m string and is swung in a circle. If the rubber stopper is swung 2.3 m above the ground and released, how far will the stopper travel horizontally before hitting the ground?
The stopper travels approximately 4.5 meters horizontally before hitting the ground.
We can use conservation of energy to solve this problem. At the highest point of the stopper's motion, all of its energy is in the form of potential energy, and at the lowest point (when it hits the ground), all of its energy is in the form of kinetic energy.
The potential energy of the stopper at the highest point is:
Ep = mgh
where m is the mass of the stopper, g is the acceleration due to gravity, and h is the height above the ground. Plugging in the values given in the problem, we get:
Ep = (0.150 kg) * (9.81 m/s²) * (2.3 m) ≈ 3.2 J
At the lowest point, all of the potential energy has been converted to kinetic energy:
Ek = (1/2) * mv²
where v is the speed of the stopper just before it hits the ground. Since the stopper is released from rest, we can use conservation of energy to equate the potential energy at the highest point to the kinetic energy just before hitting the ground:
Ep = Ek
mgh = (1/2) * mv²
Solving for v, we get:
v = √(2gh)
where h is the height from which the stopper was released. Plugging in the values given in the problem, we get:
v = √(2 * 9.81 m/s² * 2.3 m) ≈ 6.6 m/s
Now we can use the time it takes for the stopper to fall to the ground to calculate the horizontal distance it travels. The time is given by:
t = √(2h/g)
Plugging in the values given in the problem, we get:
t = √(2 * 2.3 m / 9.81 m/s²) ≈ 0.68 s
During this time, the stopper travels a horizontal distance given by:
d = vt
Plugging in the values we just calculated, we get:
d = (6.6 m/s) * (0.68 s) ≈ 4.5 m
To know more about kinetic energy, here
brainly.com/question/15764612
#SPJ1
Part A Rank, from largest to smallest, the following four collisions according to the magnitude of the change in the momentum of cart B, which has twice the inertia of cart A Rank from largest to smallest. To rank items as equivalent, overlap them O A initially moving right at 1.0 m/s, B initially stationary; stick together on impact.O A initially stationary, B initially moving on left at 1.0 m/s; stick together on impact.O A initially moving right at 1.0 m/s, B initially moving left at 1.0 m/s; stick together on impact.O A initially moving right at 1.0 m/s after impact, A moving left at 0.33 m/s, B moving right at 0.67 m/s. Largest > Smallest
Largest to smallest change in momentum of cart B: 1>2>3>4.
Rank collisions by momentum change in cart B ?Ranking of collisions based on the magnitude of change in momentum of cart B, which has twice the inertia of cart A, from largest to smallest:
O A initially moving right at 1.0 m/s, B initially moving left at 1.0 m/s; stick together on impact.O A initially stationary, B initially moving on left at 1.0 m/s; stick together on impact.O A initially moving right at 1.0 m/s after impact, A moving left at 0.33 m/s, B moving right at 0.67 m/s.O A initially moving right at 1.0 m/s, B initially stationary; stick together on impact.In this collision, both carts stick together after the impact. Since cart B has twice the inertia of cart A, it will experience a larger change in momentum than cart A. The change in momentum of cart B will be equal in magnitude but opposite in direction to the change in momentum of cart A, making this collision the one with the largest change in momentum for cart B.In this collision, cart B initially has a velocity to the left, while cart A is stationary. After the collision, both carts stick together, and move to the left with the same velocity. Cart B experiences a larger change in momentum than cart A due to its greater inertia.In this collision, both carts have initial velocities in opposite directions. After the impact, cart A moves in the opposite direction with a smaller velocity, while cart B moves in the same direction with a larger velocity. Cart B experiences a smaller change in momentum than in the previous two collisions due to the transfer of momentum to cart A.In this collision, cart A has a velocity to the right, while cart B is initially stationary. After the collision, both carts stick together, and move to the right with the same velocity. Since cart A experiences the same change in momentum as cart B, this collision has the smallest change in momentum for cart B.Learn more about momentum
brainly.com/question/30677308
#SPJ11
When knee flexion is increased (heel brought to buttocks) during running, the moment of inertia of the lower extremity about the hip: a.cannot be determined without knowing the mass and length of the leg b.remains the same c.is increased d.is decreased
When knee flexion is increased (heel brought to buttocks) during running, the moment of inertia of the lower extremity about the hip: c. is increased.
Moment of inertia is a measure of the resistance of an object to rotational motion, and it depends on the distribution of mass around the axis of rotation. When the knee is flexed and the lower leg is brought closer to the hip, the distribution of mass around the hip joint changes. The lower leg moves from an extended position, where most of the mass is concentrated at the distal end (foot), to a flexed position, where the mass is distributed more evenly along the length of the leg. This redistribution of mass increases the moment of inertia of the lower extremity about the hip. Therefore, when knee flexion is increased during running, the moment of inertia of the lower extremity about the hip is increased.For more such question on moment of inertia
https://brainly.com/question/3406242
#SPJ11
part a what is the magnitude of the charge on the half of the rod farther from the sphere? activate to select the appropriates template from the following choices. operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. operate up and down arrow for selection and press enter to choose the input value type |q|
To determine the magnitude of the charge on the half of the rod farther from the sphere, we need to consider the principle of conservation of charge.
Since the rod and the sphere are initially neutral, any charge transferred from one to the other must be equal in magnitude but opposite in sign.
Assuming that the sphere acquires a positive charge, an equal amount of negative charge must accumulate on the half of the rod closer to the sphere. By the principle of conservation of charge, an equal amount of positive charge must accumulate on the half of the rod farther from the sphere.
Therefore, the magnitude of the charge on the half of the rod farther from the sphere would be |q|, where |q| represents the magnitude of the charge transferred from the sphere. However, the sign of this charge would be positive to ensure that the net charge on the rod remains neutral.
In summary, the magnitude of the charge on the half of the rod farther from the sphere would be |q|, with a positive sign to conserve the net charge.
To know more about magnitude refer here:
https://brainly.com/question/30881682#
#SPJ11
The Fungi kingdom does not include _____.
molds
bacteria
yeast
mushrooms
The Fungi kingdom does not include bacteria. Option B is correct.
Bacteria belong to a separate kingdom called the Monera, which includes all unicellular prokaryotic organisms. The Fungi kingdom includes organisms such as molds, yeast, and mushrooms, which are eukaryotic organisms that obtain nutrients by absorbing organic matter from other organisms in their environment.
Fungi obtain nutrients by absorbing organic matter from their environment. They are heterotrophic organisms, which means that they do not produce their own food through photosynthesis like plants. Instead, they secrete enzymes that break down complex organic compounds in their environment into smaller molecules that can be absorbed through their cell walls.
Fungi play important roles in many ecosystems. They are essential decomposers, breaking down dead organic matter and recycling nutrients back into the environment. Some fungi also form mutualistic relationships with other organisms, such as mycorrhizal associations with plant roots, where they help plants absorb nutrients from the soil. Option B is correct.
To know more about the Fungi, here
https://brainly.com/question/329225
#SPJ1
(a) Calculate the focal length of the mirror formed by the shiny back of a spoon that has a 2.30 cm radius of curvature. (b) What is its power in diopters?
(a) The focal length of the mirror formed by the shiny back of a spoon that has a 2.30 cm radius of curvature is 1.15 cm and (b) The power is 86.96 diopters.
(a) The focal length of a spherical mirror is half of its radius of curvature, so the focal length of the mirror formed by the shiny back of a spoon with a 2.30 cm radius of curvature is:
focal length = radius of curvature / 2
focal length = 2.30 cm / 2
focal length = 1.15 cm
Therefore, the focal length of the mirror is 1.15 cm.
(b) The power of a spherical mirror in diopters is given by the formula:
power = 1 / focal length (in meters)
Since the focal length is in centimeters, we need to convert it to meters first:
focal length in meters = 1.15 cm / 100
focal length in meters = 0.0115 m
Now we can calculate the power in diopters:
power = 1 / focal length
power = 1 / 0.0115
power = 86.96 diopters
Therefore, the power of the mirror formed by the shiny back of a spoon with a 2.30 cm radius of curvature is 86.96 diopters.
Learn more about 'spherical mirror':
https://brainly.com/question/16188698
#SPJ11
A car is travelling at a speed of 31 m/s
the car travels 46m between the driver seeing an emergency and starting to brake
calculate the driver's reaction time
The driver's reaction time is approximately 1.48 seconds.
The distance travelled by the car during the driver's reaction time can be calculated using the formula:
[tex]d=v*t[/tex]
where:
d is the distance travelled
v is the initial velocity
t is the time taken
In this case, the car travels a distance of 46 m before the driver starts to brake. Let's assume that the car maintains its initial speed of 31 m/s during this distance, and the driver's reaction time is denoted by t. Then, the distance travelled by the car during the driver's reaction time is also 46 m. Therefore, we have:
[tex]46m = 31m/s*t[/tex]
Solving for t, we get:
[tex]t=46m/31m/s = 1.48s[/tex]
To know more about speed:
https://brainly.com/question/29127452
#SPJ4
If the resitance of 0.17 Ohms was measured across the given length of a conductive material, what is the resistivity?
Diameter is 10cm
Lenght is 1 meter
A) 0.25Ohm cm
B) 2.25Ohm cm
C) 0.13345 Ohm cm
D) 0.29 Ohm cm
E) 0.54 Ohm cm
The resistivity of the conductive material can be calculated using the formula: Resistivity = Resistance x (pi x diameter^2)/4 x Length. The resistivity of the conductive material is C) 0.13345 Ohm cm.
Resistance (R) = 0.17 Ohms
Diameter (d) = 10 cm = 0.1 m
Length (l) = 1 m
Using the formula,
Resistivity (p) = R x (pi x d^2)/4 x l
Substituting the values,
p = 0.17 x (pi x 0.1^2)/4 x 1
p = 0.13345 Ohm cm
Therefore, the resistivity of the given conductive material is 0.13345 Ohm cm.
Note: The resistivity of a material is a measure of its ability to resist the flow of electric current through it. It is an intrinsic property of the material and depends on factors such as the type of material, temperature, and impurities present in the material.
Learn more about resistivity here:
https://brainly.com/question/30799966
#SPJ11
A motor cycle travelling at 100km/h on a flat road applies the brakes at 0.80m/s² for 1 minute. How far did the motorcycle travel during this time?
Answer: 228 meters
Explanation: D=vIxt+1/2At^2
PART OF WRITTEN EXAMINATION:
are naturally-occurring dynamic stray currents that
are caused by disturbances in the earth's magnetic field by sun spot activity.
A) telluric currents
B) dynmaic stray currents
C) steady state stray currents
The answer to your question is A) telluric currents. Telluric currents are naturally-occurring electric currents that flow within the Earth's crust and upper mantle.
These currents are caused by the interaction between the Earth's magnetic field and the ionosphere, which is the layer of the Earth's atmosphere that is ionized by the sun's radiation. Sun spot activity can cause disturbances in the Earth's magnetic field, which can in turn affect the strength and direction of telluric currents.It is important to note that while telluric currents are caused by the interaction between the Earth's magnetic field and the sun's radiation, they are not the same thing as magnetic fields or magnetic currents. Magnetic fields are a fundamental force in nature that are generated by the motion of charged particles, while magnetic currents refer to the flow of electric charge within a magnetic field.Overall, the study of telluric currents is an important field of research that has many practical applications, such as in the exploration for mineral resources and the detection of underground structures. By understanding the complex interplay between the Earth's magnetic field and the sun's radiation, scientists can gain valuable insights into the inner workings of our planet and the forces that shape it.
Learn more about electric here
https://brainly.com/question/776932
#SPJ11
a body is in mechanical equilibrium when it is being moved by a constant force the sum of the external forces and the sum of the external torques acting on it is zero it is moving with constant acceleration the sum of the external forces acting on it is zero the sum of the external torques acting on it is zero
A body is in mechanical equilibrium when the (c) sum of the external forces acting on it is zero. This means that the body is not accelerating and its angular velocity is not changing. In other words, the body is in a state of rest or moving with a constant velocity.
When a body is in mechanical equilibrium, the net force acting on it is zero, which means that the body is not accelerating. This is because the body experiences equal and opposite forces that cancel each other out, resulting in a net force of zero.
In addition, when a body is in mechanical equilibrium, the net torque acting on it is zero, which means that the body is not rotating or its angular velocity is not changing. This is because the body experiences equal and opposite torques that cancel each other out, resulting in a net torque of zero.
To summarize, a body is in mechanical equilibrium when the sum of the external forces and the sum of the external torques acting on it is zero. This means that the body is not accelerating and its angular velocity is not changing. A common example of a body in mechanical equilibrium is an object at rest on a flat surface, where the force of gravity is balanced by the normal force exerted by the surface.
To know more about the mechanical equilibrium refer here :
https://brainly.com/question/14246949#
#SPJ11
A body is in mechanical equilibrium when
A.it is moving with constant acceleration.
B.it is being moved by a constant force.
C.the sum of the external forces acting on it is zero.
D.the sum of the external torques acting on it is zero.
E.it is moving with constant linear velocity and rotating with a constant angular velocity.
"from the coordinates obtained in part b, find the slope of the position-time relationship for the bowling ball using the ""rise over run"" algortithm."View Available Hint(s) 0.40 s 2.5m 2.5m/s 0.40m/s Submit
To find the slope of the position-time relationship for the bowling ball using the "rise over run" algorithm, you'll first need the coordinates obtained in part b. The slope represents the rate of change of position with respect to time, and in this context, it is equal to the ball's velocity.
Using the "rise over run" algorithm, the slope (velocity) can be calculated by dividing the change in position (rise) by the change in time (run). In this case, the coordinates represent the position and time values, with the first coordinate being the initial position and time, and the second coordinate being the final position and time.
Assuming you have two coordinates (x1, y1) and (x2, y2), where x values represent time and y values represent position:
Slope = (y2 - y1) / (x2 - x1)
Once you have the coordinates from part b, plug the values into the formula above to calculate the slope. This will give you the velocity of the bowling ball, which represents the relationship between the position and time for the given motion.
For example, if the coordinates from part b are (0.4 s, 2.5 m) and (0.8 s, 5 m), the slope would be:
Slope = (5 m - 2.5 m) / (0.8 s - 0.4 s) = 2.5 m / 0.4 s = 6.25 m/s
In this example, the slope (velocity) of the position-time relationship for the bowling ball is 6.25 m/s.
learn more about velocity here: brainly.com/question/21729272
#SPJ11
If the current is 4 Amps and the Wattage produced is 200, how many volts are present?
Answer:
50 volts
Explanation:
Wattage (W) = Current (I) x Voltage (V)
We know the current is 4 Amps and the wattage produced is 200, so we can plug these values into the formula and solve for voltage:
200 = 4 x V
Dividing both sides by 4 gives:
V = 50
Therefore, the voltage present is 50 volts.
a sphere completely submerged in water is tethered to the bottom with a string. the tension in the string is one-half the weight of the sphere.
The tension in the string is equal to the weight of the water displaced by the submerged sphere.
Based on the information given, we can make several observations about the situation.
The sphere is completely submerged in water, which means it is experiencing buoyancy force equal to the weight of the water displaced by the sphere. The tension in the string is one-half the weight of the sphere.
Let's analyze these observations further:
Buoyancy Force: When an object is submerged in a fluid, it experiences an upward force called buoyancy. According to Archimedes' principle, the buoyant force acting on an object is equal to the weight of the fluid it displaces.
In this case, the sphere is submerged in water, so the buoyant force acting on it is equal to the weight of the water displaced by the sphere. This buoyant force acts in the upward direction.
Tension in the String: The tension in the string is one-half the weight of the sphere. The weight of an object is the force exerted on it due to gravity.
In this case, the weight of the sphere is acting downward, and the tension in the string is acting upward. According to the given information, the tension in the string is one-half the weight of the sphere.
From these observations, we can conclude that the buoyant force acting on the sphere is equal to the tension in the string. Mathematically, we can express this as:
Buoyant force = Tension in the string
Weight of the water displaced by the sphere = Tension in the string
In summary, the tension in the string is equal to the weight of the water displaced by the submerged sphere.
Learn more about tension: brainly.com/question/138724
#SPJ11
Which type of fault has NO vertical motion of rocks associated with it?
A)shear fault
B)strike-slip fault
C)reverse fault
D)normal fault
The correct answer is B) strike-slip fault. It is the type of fault that has no vertical motion of rocks associated with it. Instead, the rocks move horizontally past each other, resulting in a side-to-side motion.
This type of fault does not involve any vertical motion of the rocks, and therefore has no associated vertical motion of rocks associated with it. Like shear faults, strike-slip faults also have no vertical motion of rocks associated with them. In a strike-slip fault, the rocks on either side of the fault move horizontally in opposite directions. This type of fault is also known as a 'lateral fault' since there is only horizontal movement along the fault plane.
To learn more about motion click here https://brainly.com/question/22810476
#SPJ11
A 2.0 kg object is moving to the right in the positive x direction with a speed of 1.4 m/s.
Object experiences the force shown in (Figure 1). What is the object's speed after the force ends?
Figure 1
The plot shows the horizontal component of the force applied to the object in newtons as a function of time in seconds. The magnitude stays at value 0 newtons from 0 seconds for a while, then jumps to 2 newtons and stays at this value for one half of asecond. At the end of this time, it drops back to 0 newtons and stays at this value.
The object's speed after the force ends is 1.5 m/s.
Velocity is a vector quantity that describes the rate and direction of an object's motion. It is defined as the displacement of an object per unit of time and in a specific direction.
To find the object's speed after the force ends, we need to use the force to calculate the object's acceleration, and then use the acceleration to calculate the object's final velocity.
The force-time plot in Figure 1 can be broken down into three parts:
1. The force is 0 N from 0 to 1 s.
2. The force is 2 N from 1 to 1.5 s.
3. The force is 0 N from 1.5 s onwards.
Using Newton's second law (F=ma), we can calculate the object's acceleration during each of these time intervals:
1. For the first time interval (0 to 1 s), the force is 0 N, so the acceleration is also 0 m/s^2.
2. For the second time interval (1 to 1.5 s), the force is 2 N and the mass of the object is 2.0 kg, so the acceleration is:
a = F/m = 2 N / 2.0 kg = 1 m/s^2
3. For the third time interval (1.5 s onwards), the force is 0 N, so the acceleration is also 0 m/s^2.
To find the object's speed after the force ends, we can use the following kinematic equation:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
We can assume that the displacement of the object during the time intervals in Figure 1 is negligible, since the force is applied horizontally and the object is already moving horizontally. Therefore, we can ignore the displacement term in the equation.
For the first time interval (0 to 1 s), the object's initial velocity is 1.4 m/s, so we can calculate the final velocity after 1 second as:
v^2 = u^2 + 2as = (1.4 m/s)^2 + 2(0 m/s^2)(1 s) = 1.96 m^2/s^2
v = sqrt(1.96 m^2/s^2) = 1.4 m/s
For the second time interval (1 to 1.5 s), the object's initial velocity is 1.4 m/s, and the acceleration is 1 m/s^2. We can calculate the final velocity after 0.5 seconds as:
v^2 = u^2 + 2as = (1.4 m/s)^2 + 2(1 m/s^2)(0.5 s) = 2.2 m^2/s^2
v = sqrt(2.2 m^2/s^2) = 1.5 m/s
For the third time interval (1.5 s onwards), the object's final velocity is the same as its velocity at the end of the second time interval (1.5 m/s), since there is no further acceleration.
Therefore, the object's speed after the force ends is 1.5 m/s.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
Two point charges with charges 3 micro coulombs and 4 micro coulombs are separated by 2 cm.The value of the force between them? A. 400 B. 600 C. 540N D. 270 E. 300
The value of the force between two point charges will be 540 N. The correct option is C.
The value of the force between two point charges can be determined using Coulomb's Law. Coulomb's Law states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, it can be represented as [tex]F = k * (q1 * q2) / r^2[/tex], where F is the force, k is the Coulomb's constant [tex](9 * 10^9 N*m^2/C^2)[/tex], q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, the two point charges have magnitudes of 3 micro coulombs and 4 micro coulombs, respectively, and they are separated by a distance of 2 cm (or 0.02 m). Therefore, using Coulomb's Law, the force between them can be calculated as F =[tex](9 * 10^9 N*m^2/C^2) * [(3 * 10^{-6} C) * (4 * 10^{-6} C)] / (0.02 m)^2[/tex], which simplifies to F = 540 N. Therefore, the answer is option C.
For more such questions on Force.
https://brainly.com/question/29653251#
#SPJ11
What evidence is there that some meteorites originated inside larger objects?
There are several pieces of evidence that suggest that some meteorites originated inside larger objects. First, the chemical composition of certain meteorites is very similar to that of rocks found on the Moon and Mars, indicating that they may have come from these planets.
Additionally, some meteorites contain tiny mineral grains that are only formed under high pressures, suggesting that they were once part of larger bodies such as asteroids. Finally, the presence of gas bubbles in some meteorites indicates that they were once part of a larger body with an atmosphere. All of this evidence supports the idea that some meteorites are fragments of larger objects that have broken apart and fallen to Earth. Evidence suggests that some meteorites originated inside larger objects, such as asteroids or planets, based on their composition and structure.
1. Mineral composition: Meteorites often contain minerals that can only form under high pressure and temperature conditions. These minerals indicate that the meteorites originated within larger objects, where such conditions exist.
2. Isotopic ratios: The isotopic ratios of certain elements in meteorites can be used to trace their origins. Some meteorites have isotopic ratios similar to those found on Earth and other solar system bodies, suggesting they originated from larger objects.
3. Chondrules: Many meteorites contain small, spherical particles called chondrules. These chondrules are thought to have formed during the early stages of the solar system when larger objects were forming from the surrounding dust and gas.
4. Differentiated meteorites: Some meteorites are classified as differentiated, meaning they have distinct layers resulting from a melting and cooling process. This suggests that they originated from larger objects that had enough heat and pressure to cause differentiation.
These pieces of evidence collectively point to the conclusion that some meteorites originated inside larger objects in our solar system.
Learn more about the solar system here:- brainly.com/question/12075871.
#SPJ11